Hello everyone this is my first post here.
I just upgraded from a Moto X XT1060 to the newer Moto G 3rd Gen 1GB/8GB XT1540 two weeks ago, And found out that it does have a hand swipe to wake the Moto Display but it only works once every lock screen cycle.
I'm assuming this behavior is a bug, Can anyone else test this for me ?
1. Make sure Moto Display is on and set the phone on a table, let the screen go black, wait 2min.
2. Now swipe your hand over the screen about 1/4inch from the glass, Walla !! screen turns on ! woohoo ! lol
3. Now hand swipe again, Yep it doesn't work anymore....
4. Now unlock the screen to show your main home page etc.
5. Now set the phone back on the table and let the screen turn off again, Wait 2min and repeat hand swipe, Works again lol ! but again only works once.
Anyone else seeing this ?
No it doesn't work for me.
Sent from my MotoG3 using XDA Free mobile app
That is moto display, the moto g 2015 shouldn have swipe to unlock.
not working for me
Tested under these conditions :
1) Moto display ON
2) Layed it still on bed , table.
3) waved my hand really close to it several times, and i touched with out disturbing it on every spot ..
Result :: Not working wave gesture,
NOTE: if ur device moves in x,y,z directions even a little.. the moto display gets active ONLY ONCE.
Well weird lol my moto g is bugged or something.
I do have both hand gestures turned off, Both the camera twist and chop for Flashlight are off, Wonder if that's why I have this bug.
I hope someone else posts this same behavior or I guess ill be forced to return it since it could be a defective product. Would any of you return it for this bug ?
No go for me either. OP are you sure you're not somehow moving the phone when you wave your hand by it? I mean it only takes an ever so slight movement to active the Moto Display, so if you're waving your hand 1/4 inch from the screen maybe wind is moving the phone causing it to work?
Proximity sensor can activate moto display to.
I'm sure I'm not moving the phone when i wave my hand over it, I'm also sure it is the proximity sensor.
But can anyone check this, I didn't run Google play store to update apps yet so I'm thinking its because of that it hasn't updated the Moto app. Which in turn is something else that's strange, Within the first 12hours of setting it up it only updates like 13 apps etc. then after 12 hours of sitting the Google play store is offering more to update like Moto boot and some others, Weird that letting it sit for 12hours it then is offering more to update very strange.
garikfox said:
I'm sure I'm not moving the phone when i wave my hand over it, I'm also sure it is the proximity sensor.
But can anyone check this, I didn't run Google play store to update apps yet so I'm thinking its because of that it hasn't updated the Moto app. Which in turn is something else that's strange, Within the first 12hours of setting it up it only updates like 13 apps etc. then after 12 hours of sitting the Google play store is offering more to update like Moto boot and some others, Weird that letting it sit for 12hours it then is offering more to update very strange.
Click to expand...
Click to collapse
yeah, that might be the case, when i got the mobile the 1st moto app used to behave strangely.. that was infact good and less intelligent
1) BEFORE:when i power on torch using Chop CHop it used to be ON till i OFF with either Chop-chop or manually turn off. that is the only case to turn off.
NOW : if i keep the phone idle without disturbing it in Flipped/regular way it stops automatically after 2 seconds or so..
2) moto display also became more agressive,while i am sleeping if bed's cushion goes down even a little it would lit up .. that was a little annoying.
These are the things i had seen changed..
so.. i am sure that updates had changed the behaviour of Moto App, that might also be the reason.. i will try to uninstall updates and check it
---------- Post added at 08:55 AM ---------- Previous post was at 08:45 AM ----------
Yo genius it works
i had uninstalled the Updates and now the proximity seems to be working but it just Lights up the moto display, and quickly turns off the display
and that i call it a WORKING
if you update your Moto app, this will be GONE
Tested conditions :
1) on a table, by keeping a haircomb near to it for a second and removed it with out disturbing the mobile
2) On the bed same with my hand on the proximity sensor or a second and removing it
NOTE: i am not waving my hand over it, it seems like i am not perfectly waving it else it would also work ..
Awesome thanks !, So it only does the hand wave once then doesn't do it again until you go to home screen then let it fall back to sleep ?
I noticed my twist motion has become far more sensitive, as well...I'm forever opening my camera by accident. Especially when I take my phone out of my pocket.
All the Reviews I've read for this phone were saying the same thing that the twist for camera is sensitive.
Whenever I wave my hand over it, it wakes up for about 3 seconds then turns right off. I woke it 3 times in a minute.
Not unlocked but awake.
I'm using gestures in Moto and in Res Remix ROM.
So your using a custom ROM with your Moto G 2015 ? and it lets you do the wave more then once per lock session ?
It works very well just you need to wave your hand over proximity sensor and it will wake your phone.
Sent from my MotoG3
Related
Sometimes I have to knock knock twice in a row to turn on the device. It works well turning off, but on half of the times it won't turn on. Gotta do it twice. Anyone else encounter this?
Sent from my LG-D803 using Tapatalk 4
Brava27 said:
Sometimes I have to knock knock twice in a row to turn on the device. It works well turning off, but on half of the times it won't turn on. Gotta do it twice. Anyone else encounter this?
Sent from my LG-D803 using Tapatalk 4
Click to expand...
Click to collapse
I do not have that issue, but I have read in a few posts that it can be dependent on where you are knocking on the screen.
hd-renegade said:
I do not have that issue, but I have read in a few posts that it can be dependent on where you are knocking on the screen.
Click to expand...
Click to collapse
Yes! Excellent advice
Sent from my LG-D803 using Tapatalk 4
Brava27 said:
Yes! Excellent advice
Sent from my LG-D803 using Tapatalk 4
Click to expand...
Click to collapse
I think the biggest issue is knock speed.... mine works damn near 100% when I slowed down some, and knock slower like it showes at the end of the G2 commercials....
I think it's partially related to the proximity sensor. There are times when I can't get the knock on to work at all and when I hit the power button the screen shuts right back off.
Usually a few swipes over the sensor makes it work again. Sometimes I'll go in and turn the Knock On gesture off and back on and then it seems to work great for a while too.
csmith8507 said:
I think it's partially related to the proximity sensor. There are times when I can't get the knock on to work at all and when I hit the power button the screen shuts right back off.
Usually a few swipes over the sensor makes it work again. Sometimes I'll go in and turn the Knock On gesture off and back on and then it seems to work great for a while too.
Click to expand...
Click to collapse
This is my exact problem. The phone just decides it doesn't want to wake up with knock-on...but after I press the power button, it only turns on for half a second and it's out again. I never tried swiping over the sensor, but hopefully it works because it's mighty annoying when it does it during a call!
I wonder if there's a fix for this?
canecbr600 said:
I think the biggest issue is knock speed.... mine works damn near 100% when I slowed down some, and knock slower like it showes at the end of the G2 commercials....
Click to expand...
Click to collapse
this, if you are trying to do it like you did on the nokia n9 or nokia 8800 then it won't work
slow deliberate knocks are the only way
waiting on the g2 to arrive, but on my review unit, knock knock wouldn't respond correctly if i left the phone on the table, but if i picked it up, it would work nothing scientific here just an experience of one person and one prototype
I had the same issue... What fixed it is: 1. I found that the screen protector was hindering it somewhat. 2. Go to settings->display->screen-off effect-> and change it to simple. This REALLY seemed to help. Let us know!
in_dmand said:
I had the same issue... What fixed it is: 1. I found that the screen protector was hindering it somewhat. 2. Go to settings->display->screen-off effect-> and change it to simple. This REALLY seemed to help. Let us know!
Click to expand...
Click to collapse
I did notice it does seem to behave better when set to simple for the screen off animation.
My screen protector does have a cutout around the sensors. Keeping the sensor area clean enough to qualify as having OCD does seem to make it work properly the first time, every time. Maybe it's overly sensitive?
Edit: Scratch that. 30 seconds later it's behaving erratically again. Maybe it's not the fact that it's clean, but the swiping over the sensor that temporarily resolves it.
it also seems to work much better when knocking at the top of the screen where the statusbar would be.
So I ended up swapping the phone out over the weekend for a new one and now everything seems to work just fine. Seems to indicate that it's not a software problem, but rather a hardware issue with the proximity sensor.
Guys if your covering the sensors when turing the device screen on it will turn right back of on you. It's a feature LG implemented so the device wouldnt wake up in your pockets. Don't cover the sensors.
Need a little example? Grab your phone and cover the sensors and knock knock knock.You can knock till the cows come home but it will not turn on. Same thing goes for the power button but its a little delayed and will turn the screen on for half a sec and turn right back off. Practice not to do this because your phone isn't broken. There is actually a thread on this deep in the forums somewhere but its been forgotten now.
Walter21026 said:
Guys if your covering the sensors when turing the device screen on it will turn right back of on you. It's a feature LG implemented so the device wouldnt wake up in your pockets. Don't cover the sensors.
Need a little example? Grab your phone and cover the sensors and knock knock knock.You can knock till the cows come home but it will not turn on. Same thing goes for the power button but its a little delayed and will turn the screen on for half a sec and turn right back off. Practice not to do this because your phone isn't broken. There is actually a thread on this deep in the forums somewhere but its been forgotten now.
Click to expand...
Click to collapse
This is true however there are indications of problems with the proximity sensor as well. Some of the devices are behaving as if tree sensor is covered even when it's not.
Walter21026 said:
Guys if your covering the sensors when turing the device screen on it will turn right back of on you. It's a feature LG implemented so the device wouldnt wake up in your pockets. Don't cover the sensors.
Need a little example? Grab your phone and cover the sensors and knock knock knock.You can knock till the cows come home but it will not turn on. Same thing goes for the power button but its a little delayed and will turn the screen on for half a sec and turn right back off. Practice not to do this because your phone isn't broken. There is actually a thread on this deep in the forums somewhere but its been forgotten now.
Click to expand...
Click to collapse
Thanks for this.. Very insightful.. I tried it immediately LOL
I had the same issue. I have no case or screen protector on, and was not covering the sensor when trying to wake the phone. For some reason though, knocking wouldn't wake the phone, and pressing the power button would only turn the screen on for a few seconds. I want even given enough time to get past the unlock screen. I went into the store and they are sending me a replacement that should come in later this week. It doesn't happen all the time. It is much more noticeable after receiving a call though.
Sent from my VS980 4G using Tapatalk
Definitely is dependent on the proximity sensor. If i just have my thumb on the edge of the phone by the sensor it will display this problem. Even with my finger a half to one inch above it will do this. I will be paying close attention to the proximity sensor from now on when it doesn't work. Still have a few days to return and thought i had an issue but maybe not.
Sent from my VS980 4G using xda app-developers app
sometimes its also greasy fingers, at least in my case, rarely though
As long as you tap twice the same place it's working fine. If distance between first and second tap is greater than 1 - 1.5 cm it won't work.
Got the same problem on my d802...when i left the phone on my table for 2-3min it wont wake up on first knock knock even power key wake it up for 1sec after auto turn off again....even with no screen protector....i noticed that sometimes there is a delay about 5-10sec after knock knock and screen turns on....other thing i noticed when i knock on immediently after turning off it works 100%....BUT i also noticed when i knock on after a while it turns on and i can unlock got vibration and sound of the unlock but i cant see anything. Screen looks like its off but when i look closely i can hardly see widgets and when i set effect to tv out i can see the effect by pressing the power button...when i press the power button again screen turns on like normal...i noticed sometimes on a rerboot the lg bootlogo disapears the led is working an showing all colors but the boot animation is gone like the screen is off at the bootup...dont know why after the bootup the pin lock screen is showing up normal....sorry for my english^^
Hi all,
i love the moto display feature but i have some issues that make it less usable for me.
- on certain conditions the moto display seems to react to fast, while on other i had to wave 3-4 times until the screen was woken up. Does anybody know what makes the display not recognize the wave sometimes?
- i hate the fact that the notifications are an all or nothing feature. i might have 10 notifications, and i can only dismiss them all at once. But i want to dismiss onlyspecific ones and keep the rest on my lockscreen. Is this possible somehow?
- as the moto display dismisses all notifications at once, and the regular android lockscreen doesn't, creates situations where there are notifications on the drawer (which need to be dismissed manualls) vs. the Moto screen that doesn't show any notification.
Is there any way to make the dismissing of notifications work as on stock android (possibility to either dismiss all, or only specific ones).
I'm pretty sure its a proximity and light sensor of some sort, but other than that, I'm having the same issues as you.
Sent from my XT1254 using XDA Free mobile app
I believe that only the sensors on the top of the phone fact to the wave. I don't know what the bottom sensors do.
Why is it impossible to find a diagram listing the location and function of all of the sensors?
If you have many notifications and want to do each individually, then instead of using the moto display just hit the power button to go to the normal lockscreen.
pizza_pablo said:
I believe that only the sensors on the top of the phone fact to the wave. I don't know what the bottom sensors do.
Why is it impossible to find a diagram listing the location and function of all of the sensors?
Click to expand...
Click to collapse
Top sensor is for waving (as you said). Bottom sensors are there for when you pick the phone up. If you go to pick the phone up, once your hand covers those two sensors, the display lights up. I found this out somewhere on XDA because I had no idea what they did either lol.
you can disable the sensor, and it will work like the first generation moto x.
Still, the sensor works fine for me, they just takes a little time to turn on after the screen lights on (about 1, 2 seconds) so it's not instant.
chris23445 said:
Top sensor is for waving (as you said). Bottom sensors are there for when you pick the phone up. If you go to pick the phone up, once your hand covers those two sensors, the display lights up. I found this out somewhere on XDA because I had no idea what they did either lol.
Click to expand...
Click to collapse
Thanks!
I checked out the bottom sensors, and it appears that they do respond only to touch, as opposed to waving over. :good:
Just got a G5 Plus yesterday.
When the phone is at rest, if the surface moves or I pick it up without touching the finger print sensor or the power button, the clock/battery/date appears very dimly on the screen and disappears after a few seconds. Is there a way to turn this feature off? I have searched for ways to turn it off but haven't found a way yet.
I'm worried that when I work out with the phone in my pocket, the motion will wake up the phone and the sweat/heat will accidentally call 911 or something even though I haven't pressed any buttons.
Thanks
It's called Moto Display. To turn it off, go into the Moto app and hit display. I've used it for years and I don't think the phone ever was unlocked while in my pocket. If you have a password/pin or fingerprint set up, it's almost impossible to become unlocked in your pocket.
roygbiv859 said:
It's called Moto Display. To turn it off, go into the Moto app and hit display. I've used it for years and I don't think the phone ever was unlocked while in my pocket. If you have a password/pin or fingerprint set up, it's almost impossible to become unlocked in your pocket.
Click to expand...
Click to collapse
To add onto this. If it's in your pocket the display isn't turning on due to the proximity sensor being blocked by the pocket. You can test this by holding your hand in front of the earpiece for 5 seconds, remove it and the screen will turn on. The screen will also turn on if for example you pick it up from a table.
EDIT: Didn't see that he mentioned this in the OP. It's perfectly normal. Would also like to add I've had the Moto x which has the same features for years and it never accidentally unlocked or called anyone. And I didn't even have a password set on it.
bvsbutthd101 said:
To add onto this. If it's in your pocket the display isn't turning on due to the proximity sensor being blocked by the pocket. You can test this by holding your hand in front of the earpiece for 5 seconds, remove it and the screen will turn on. The screen will also turn on if for example you pick it up from a table.
EDIT: Didn't see that he mentioned this in the OP. It's perfectly normal. Would also like to add I've had the Moto x which has the same features for years and it never accidentally unlocked or called anyone. And I didn't even have a password set on it.
Click to expand...
Click to collapse
It's a great feature. It's the sole reason I'm sticking with the stock rom.
roygbiv859 said:
It's a great feature. It's the sole reason I'm sticking with the stock rom.
Click to expand...
Click to collapse
It's the main reason I go with moto phones now. All the other companies are starting to do it though but you can't get those phones for cheap like the g5 plus.
Operating as designed
I miss my g4 plus. It was stolen. Can anyone send me an APK for the Moto display of g5 plus. I want to use that on my phone ( Honor 6x). Wish it works. Thanks.
first thing i turn off.
roygbiv859 said:
It's a great feature. It's the sole reason I'm sticking with the stock rom.
Click to expand...
Click to collapse
Ambient display/moto display works fine on custom ROMs and is configurable.
username8611 said:
Ambient display/moto display works fine on custom ROMs and is configurable.
Click to expand...
Click to collapse
Can you tell me which ones? I was under the impression the stock rom had a separate processor set aside just for moto display which meant longer battery life
I turned this off because while driving at night and the phone rest in the passenger seat or on my lap/on the seat between my legs, the display would keep lighting up in response to vehicle movements. Too distracting.
Is there a setting to make that clock brighter and stay on a bit longer PLS?
What is pocket mode and how it works
Pinned ringtone inactive when phone is screen is on table
I bought a used V20 with a defective screen. I change it, everything work for fine, but i notice a strange behaviour with the second screen.
The second screen is always on and i can unlock it by only touching the finger print sensor. BUT at night (or in the dark), the second screen turn off and i need to press 2 times on the power button to wake the phone.
The Knock On feature doesn't work too in the dark.
The light sensor seems to work correctly.
I would love to post a video but i can't......
This is an issue or it is normal ??
Thanks for your help !
Sounds like Doze.
I don't find anything related to Doze or "standby" about this screen.
check "daily timeout" on Show when main screen off. Seem u turn this function on at night
David_26 said:
I bought a used V20 with a defective screen. I change it, everything work for fine, but i notice a strange behaviour with the second screen.
The second screen is always on and i can unlock it by only touching the finger print sensor. BUT at night (or in the dark), the second screen turn off and i need to press 2 times on the power button to wake the phone.
The Knock On feature doesn't work too in the dark.
The light sensor seems to work correctly.
I would love to post a video but i can't......
This is an issue or it is normal ??
Thanks for your help !
Click to expand...
Click to collapse
thophan1975 said:
check "daily timeout" on Show when main screen off. Seem u turn this function on at night
Click to expand...
Click to collapse
Don't seems to change anything
Could it me the last security update ??
I reset the phone today and same "issue"
David_26 said:
Don't seems to change anything
Could it me the last security update ??
I reset the phone today and same "issue"
Click to expand...
Click to collapse
Sounds like there is an issue with the proximity sensor (not light sensor).
It's setup to turn the second screen off as well as disable knock on if the phone is in your pocket. Even during daylight hours if you put your finger within an inch of the sensor when the main screen is off, it should trigger it.
It seems your sensor may just be messed up.
David_26 said:
Don't seems to change anything
Could it me the last security update ??
I reset the phone today and same "issue"
Click to expand...
Click to collapse
There are a few apps on the play store you can try to fix it if you are rooted. You could also try a sensor app to see if the proximity sensor is showing feedback properly although you might need to be rooted for the apps to show the proximity sensor properly (not sure). My note 4 had a hardware test in the service menu not sure how to do it on V20 though.
Same Issue
Edit: Resolved the issue. Please read this post. There is a small rubber gasket-type thing that sits in the hole of the phone's frame where the proximity sensor is positioned. That rubber gasket was not included with my replacement screen. I pulled the rubber piece out of my original, broken screen, and installed it into my replacement screen. I am no longer having issues with the phone in the dark.
I am experiencing the same issue. I have a T-Mobile LG v20 (H918) and I cracked the screen last week. I ordered a replacement LCD assembly and installed it myself. Everything works fine during the day or in a well lit room, but at night, in a dark room, I experience all of the issues you are reporting. I am finding other posts online with our same issue, but as of yet, no resolution.
Even though the second screen is set to always be on, at night, in a dark room, it turns off almost immediately after locking the phone. It is almost as if the phone is in a "deep sleep" or something, because the following also occurs:
Knock On will not wake the phone
Fingerprint sensor will not wake the phone
Even connecting to the phone via AirDroid / AirMirror the phone doesn't wake
Need to press the power button multiple times to wake phone
Providing a light source immediately turns on second screen and resolves all issues
Hey guys!
The Moto G5 and G5 Plus have some motion features, like twist to start the camera or shake to start the flashlight.
Well, some times my Moto G5 Plus freeze this features, and some times work, some times not work.
I don't know why this occur, I think can be gyroscope or Android bad function...
With someone this problems occur?
Someone know how fix it?
I've reseted my Moto G5 Plus, but this not solve the problem
Someone?
bkawakami said:
Someone?
Click to expand...
Click to collapse
I have the same problem also the proximity sensor doesn't work, i "fix" the problem but only for a short time , when u call someone the bug disappears , but only for short time ... so i create a widget with the call service and then hang out... theeeen the phone works perfectly
sorry for my bad english
I also have same problem in both g4 plus and g5 plus.
Gestures are working fine for me, I am on the latest stock ROM, my device is 4/32gb indian varient.
Sent from my Moto G (5) Plus using Tapatalk
sinchan_nohara said:
I also have same problem in both g4 plus and g5 plus.
Click to expand...
Click to collapse
u have a guarantee? i tried in the store (i have 30days in the store, 1year with motorola) and they said : all its ok.. but the phone still fails .
i have the 2/32gb with telcel/mex
MartinPowa said:
u have a guarantee? i tried in the store (i have 30days in the store, 1year with motorola) and they said : all its ok.. but the phone still fails .
i have the 2/32gb with telcel/mex
Click to expand...
Click to collapse
I think this normally behave this way i tried this in some other moto phones also sometimes it work perfectly but some time it takes 2 or 3 guestures to activate flash i don't think by changing the phone will fix it may be it just behave this way
I'm facing a similar issue..chop for flashlight and twist for camera not working.. Randomly work by themselves...if I manually turn on flash light..it turns OFF with the chop gesture...don't know why it's not working.. Help anybody?? Also proximity sensor has some issues...
Actions sometimes work, other times don't
I have the same problem with Moto Actions on my G5 Plus. They will work for a while after a reboot. Also chop for flashlight will work to turn light off, but not on, when it's acting up. So frustrating! Otherwise a great phone but these little things make me wonder about my purchase.
I spent hours researching on the net and testing why the above problems happened. In the end, the answer was simple: some features don't work when there is a cover on the phone. With the phone cover removed, I can shake the light on and off and turn the camera on - which I can't do when the phone has its case cover over the screen. I think that this is because IR sensors are needed, not just gravitation sensors.
Scarecrow is right: one can turn on the light manually and then switch it off by karate chopping (even with the screen covered), but the inverse (chop to turn on light) only works with the screen uncovered. That is strange, but at least the chop and twist functions do work with the screen uncovered.
It is a little sad, as I love my phone case; it protects both front and back. But I now know to remove the front cover if I want to use the chop or twist function.
I actually have a Moto G4, which I love. But I think that what I have written should hold true for the G5, too. Good luck!
LPCF said:
I spent hours researching on the net and testing why the above problems happened. In the end, the answer was simple: some features don't work when there is a cover on the phone. With the phone cover removed, I can shake the light on and off and turn the camera on - which I can't do when the phone has its case cover over the screen. I think that this is because IR sensors are needed, not just gravitation sensors.
Scarecrow is right: one can turn on the light manually and then switch it off by karate chopping (even with the screen covered), but the inverse (chop to turn on light) only works with the screen uncovered. That is strange, but at least the chop and twist functions do work with the screen uncovered.
It is a little sad, as I love my phone case; it protects both front and back. But I now know to remove the front cover if I want to use the chop or twist function.
I actually have a Moto G4, which I love. But I think that what I have written should hold true for the G5, too. Good luck!
Click to expand...
Click to collapse
Yes, the front needs to be uncovered. With the proximity sensor covered, the motion features and Moto display are disabled. This prevents activation while the phone is in your pocket.
Sent from my Moto G (5) Plus using Tapatalk