Related
Hi Guys,
today I wanted to flash the latest Stock ROM for my device via ODIN. I've done this many times before and (thought) I knew what I was doing. It is my third Phone frome the same carrier and none of them were branded/ locked devices before. Unfortunatly I wasn't aware that this particular device was locked.
After downloading the international firmware I tried to install it and ODIN got stuck while writing the system.img. After that my phone did not boot up (of course). After that I downloaded and tried to isntall the firmware of the carrier, but I had the exact same issue. When I turn my device on I get to an error screen which tells me to execute an "emergency recovery" via the Samsung smart switch software. But it too gets stuck on some point and only gets me to an error screen.
FRP hinders me to install a custom recovery and the stock one does not allow any isntallations via ADB or SD card.
My qustion is: Does anyone know how I can install a rom from here?
I know that I had to have made some changes prior to the flashing, but as I said I was not aware and an Idiot for not double checking.
Since it is not bricked yet I suppose there must be an answer but I can't find anything.
Thanks in advance
Edit:
After only installing the stock bootloader, I am autmaticly entering it when I boot my devive. On the bottom of the screen is an error message: "dm-verity verification failed...
E:failed to mount /system (invalid argument)"
Fix
For anyone in the same situation: I fixed it.
In the end all you have to do is flash the firmware with the fitting PIT file. If you firmware consists of multiple files and there is a "HOME"-file, flash it with this one first on the AP slot in ODIN. After that the same again just use the AP file this time.
My phone is up and running again now.
fabivons said:
hi guys,
today i wanted to flash the latest stock rom for my device via odin. I've done this many times before and (thought) i knew what i was doing. It is my third phone frome the same carrier and none of them were branded/ locked devices before. Unfortunatly i wasn't aware that this particular device was locked.
After downloading the international firmware i tried to install it and odin got stuck while writing the system.img. After that my phone did not boot up (of course). After that i downloaded and tried to isntall the firmware of the carrier, but i had the exact same issue. When i turn my device on i get to an error screen which tells me to execute an "emergency recovery" via the samsung smart switch software. But it too gets stuck on some point and only gets me to an error screen.
Frp hinders me to install a custom recovery and the stock one does not allow any isntallations via adb or sd card.
My qustion is: Does anyone know how i can install a rom from here?
I know that i had to have made some changes prior to the flashing, but as i said i was not aware and an idiot for not double checking.
Since it is not bricked yet i suppose there must be an answer but i can't find anything.
Thanks in advance
edit:
After only installing the stock bootloader, i am autmaticly entering it when i boot my devive. On the bottom of the screen is an error message: "dm-verity verification failed...
E:failed to mount /system (invalid argument)"
Click to expand...
Click to collapse
have u solved your problem ? This problem i am facing on the s7edge nougat ? Plz help ?
Hey,
look at the second post I made in this thread. There is described how I got my S7 up and running again. I'm not sure if it is a valid solution since it felt like trial and error to me, but I'm writing this text from my S7 so it might be worth a try!
Good luck!
Fabivons said:
Hey,
look at the second post I made in this thread. There is described how I got my S7 up and running again. I'm not sure if it is a valid solution since it felt like trial and error to me, but I'm writing this text from my S7 so it might me worth a try!
Good luck!
Click to expand...
Click to collapse
y i have done that and the device boots up but some applications force close and when i insert the memory card , the phone gets restarted everytime
Fabivons said:
For anyone in the same situation: I fixed it.
In the end all you have to do is flash the firmware with the fitting PIT file. If you firmware consists of multiple files and there is a "HOME"-file, flash it with this one first on the AP slot in ODIN. After that the same again just use the AP file this time.
My phone is up and running again now.
Click to expand...
Click to collapse
Tell us in detail now.
SjDU said:
Tell us in detail now.
Click to expand...
Click to collapse
"please"
I described everything I did in the posts before.
As soon as you can enter the system again all you need to do is deactivate the locks I was talking about in my first post and perform a full wipe.
After that you can install any ROM you want via ODIN just like you are used to.
If that doesn't work for you, I don't have any answers either.
But again:
Prep work:
1. Download most recent ODIN
2. Download the correct firmware for your carrier (from www.sammobile.com)
3. Download the correct PIT file for your device
4. Put your device in download mode
Process:
1. Extract your firmware if it is a zip
2. Start up ODIN
3. Connect your device and check if it's detected by ODIN
3. Put the PIT file in ODIN
4. Put the "HOME" file of your firmware in the PDA slot of ODIN
5. Press start
6. When finished unplug your device and restart phone and ODIN
7. Reconnect your phone and check if it's detected by ODIN
8. Put all the other files of your firmware + the PIT in the correct slot in ODIN
9. Press start
After that my device booted up but still was, as you described too, a little buggy. So I deactivated FRP, activated USB debugging in the dev options, installed TWRP, performed a full wipe and installed another firmware of my choosing via ODIN (without a PIT file this time).
I am running 7.0 on my device now and it works flawlessly.
Fabivons said:
"please"
I described everything I did in the posts before.
As soon as you can enter the system again all you need to do is deactivate the locks I was talking about in my first post and perform a full wipe.
After that you can install any ROM you want via ODIN just like you are used to.
If that doesn't work for you, I don't have any answers either.
But again:
Prep work:
1. Download most recent ODIN
2. Download the correct firmware for your carrier (from www.sammobile.com)
3. Download the correct PIT file for your device
4. Put your device in download mode
Process:
1. Extract your firmware if it is a zip
2. Start up ODIN
3. Connect your device and check if it's detected by ODIN
3. Put the PIT file in ODIN
4. Put the "HOME" file of your firmware in the PDA slot of ODIN
5. Press start
6. When finished unplug your device and restart phone and ODIN
7. Reconnect your phone and check if it's detected by ODIN
8. Put all the other files of your firmware + the PIT in the correct slot in ODIN
9. Press start
After that my device booted up but still was, as you described too, a little buggy. So I deactivated FRP, activated USB debugging in the dev options, installed TWRP, performed a full wipe and installed another firmware of my choosing via ODIN (without a PIT file this time).
I am running 7.0 on my device now and it works flawlessly.
Click to expand...
Click to collapse
the time when u were fixing your device , you were on marshmallow or nougat ? beacuse i am on nougat and whenever i flash twrp , it stucks there and not booting into it even i have ticked the oem unlock and usb debugging in developer mode ?
suhaibahmad said:
the time when u were fixing your device , you were on marshmallow or nougat ? beacuse i am on nougat and whenever i flash twrp , it stucks there and not booting into it even i have ticked the oem unlock and usb debugging in developer mode ?
Click to expand...
Click to collapse
Does the TWRP flash complete? Can you boot up the OS after you flashed TWRP? (And did you download the correct version of TWRP for your device?)
As a last resort, you could try and flash marshmallow on your device and see if it works there.
Fabivons said:
Does the TWRP flash complete? Can you boot up the OS after you flashed TWRP? (And did you download the correct version of TWRP for your device?)
As a last resort, you could try and flash marshmallow on your device and see if it works there.
Click to expand...
Click to collapse
if i flash marshmallow it doesnt even boot up and in the odin mode showing binary and everything as custom , if i flash nougat and then flash twrp and try to manually boot into twrp it stucks on the s7edge screen which comes before recovery , and if i boot the mobile normally without the button combination then it stucks on the second logo SAMSUNG . if i flash again the stock recovery then boots normally
suhaibahmad said:
if i flash marshmallow it doesnt even boot up and in the odin mode showing binary and everything as custom , if i flash nougat and then flash twrp and try to manually boot into twrp it stucks on the s7edge screen which comes before recovery , and if i boot the mobile normally without the button combination then it stucks on the second logo SAMSUNG . if i flash again the stock recovery then boots normally
Click to expand...
Click to collapse
Have you tried to perform a regular factory reset via the OS on nougat? Sometimes that does the job, too.
But as I said. I can only give you my best guess here - my phone worked after my procedure, so I didn't investigate further.
And don't forget: Google is your friend.
Fabivons said:
Have you tried to perform a regular factory reset via the OS on nougat? Sometimes that does the job, too.
But as I said. I can only give you my best guess here - my phone worked after my procedure, so I didn't investigate further.
And don't forget: Google is your friend.
Click to expand...
Click to collapse
thats your kindness , yes i have performed the factory reset several times from recovery , but when i trying to reset it from settings , it goes after restart to recovery with dm-verity error , then i wipe and factory reset from there
Fabivons said:
For anyone in the same situation: I fixed it.
In the end all you have to do is flash the firmware with the fitting PIT file. If you firmware consists of multiple files and there is a "HOME"-file, flash it with this one first on the AP slot in ODIN. After that the same again just use the AP file this time.
My phone is up and running again now.
Click to expand...
Click to collapse
Fabivons said:
"please"
I described everything I did in the posts before.
As soon as you can enter the system again all you need to do is deactivate the locks I was talking about in my first post and perform a full wipe.
After that you can install any ROM you want via ODIN just like you are used to.
If that doesn't work for you, I don't have any answers either.
But again:
Prep work:
1. Download most recent ODIN
2. Download the correct firmware for your carrier (from www.sammobile.com)
3. Download the correct PIT file for your device
4. Put your device in download mode
Process:
1. Extract your firmware if it is a zip
2. Start up ODIN
3. Connect your device and check if it's detected by ODIN
3. Put the PIT file in ODIN
4. Put the "HOME" file of your firmware in the PDA slot of ODIN
5. Press start
6. When finished unplug your device and restart phone and ODIN
7. Reconnect your phone and check if it's detected by ODIN
8. Put all the other files of your firmware + the PIT in the correct slot in ODIN
9. Press start
After that my device booted up but still was, as you described too, a little buggy. So I deactivated FRP, activated USB debugging in the dev options, installed TWRP, performed a full wipe and installed another firmware of my choosing via ODIN (without a PIT file this time).
I am running 7.0 on my device now and it works flawlessly.
Click to expand...
Click to collapse
Well I had the same issue but Odin method didn't work for me on Nougat. And also FRP lock was On. every time I flashed the files it give me FRP on error. so I had to use Smartswitch. Even though I used original csc and ap files with latest Odin. BTW I have SM-G935FD model
SjDU said:
Well I had the same issue but Odin method didn't work for me on Nougat. And also FRP lock was On. every time I flashed the files it give me FRP on error. so I had to use Smartswitch. Even though I used original csc and ap files with latest Odin. BTW I have SM-G935FD model
Click to expand...
Click to collapse
Well FRP has to be turned off (the button in the menu is called "OEM unlock, the button has to be set to on which deactivates FRP). You don't mention using a PIT file - did you use one?
I was trying to root my phone
odin failed and my phone showed "Custom Binary (Recovery): Blocked By FRP Lock"
I was following this video
https://www.youtube.com/watch?v=M8ji0yjf7IY
What went wrong ?
johngr77 said:
Probably you forgot to enable OEM unlock in developer options menu
Click to expand...
Click to collapse
I did that and I successfully installed the twrp file
Then the phone rebooted and now it is stuck in the Samsung logo !!
What should I do ?
look through this forum - i only put the answer on here yesterday
JUST FLASH with latest stock firmware.. 1st of all to get phone into main screen/ activation lock screeen
asadnow2k said:
JUST FLASH with latest stock firmware.. 1st of all to get phone into main screen/ activation lock screeen
Click to expand...
Click to collapse
I did that and its working again
But How can I root it now ?
I tried rooting it again the same way but it got stuck on logo screen again !
is there any alternative way to root it ?
HussainJH said:
I did that and its working again
But How can I root it now ?
I tried rooting it again the same way but it got stuck on logo screen again !
is there any alternative way to root it ?
Click to expand...
Click to collapse
you just install frimware latest one and activate it with ur google account. than oem unlock than flash with root via odin
Im having this issue with my phone i accidently ticked off the oem unlock in development settings I put the phone in download mode because thats the only mode i can get into (recovery and regular boot does not work) when I connect to pc now it shows up as usb serial device in ports or it shows up as samsung modem and odin wont flash the firmware
I never had any issue. You get a single recovery.IMG and flash it. The s6e+ is tricky. You should have a custom ROM or what you want to flash ready and just flash twrp, boot immediately into it. Backup phone via twrp then wipe it and flash custom ROM. This will ensure you don't get any real issues or fpr blocked. Also use XDA tuts or get help here, YouTube can go good or bad. Recovery images are device specific. If you have f and flash t it won't work. You have to really look at what you are flashing and match model information. I'm seeing a lot of people fpr blocked and in trouble. I might go make a little walkthrough
I tried following method and it got completed successfully. Also root checker, Root Checker Advanced, Root check apps showing device is rooted successfully.
Link followed: unable to paste you tube link as I am new user. Please check "How To Root Samsung Galaxy J5 (SM-J500F) Android 6.0.1 Marshmallow EZ Rooting!" in youtube
Steps completed
1. Downloaded odini for the model SM-J500F from (first option from search results of CF auto root)
2. Unzipped the downloaded file CF-Auto-Root-j5lte-j5ltexx-smj500f.zip to the PC
3. Enabled OEM unlock and USB debugging in developer options
4. Switched off my mobile, entered into Download mode->Volume Down+Home+Power Buttons and clicked on continue
5. Connected phone to the PC and opened odin (Odin3-v3.10.6.exe), It showed the message added
6. Selected AP Button then Browsed for the TWRP Recovery file (CF-Auto-Root-j5lte-j5ltexx-smj500.tar.md5) selected it. The option to disable auto reboot was not here. Also it was not requested in the above youtube link.
7. Clicked the Start button and Odin rooted the Samsung Galaxy J5 with that rooting file. It was showing the steps in phone properly as showed in video. And odin showed pass after some reboots. Opened SuperSu which is also got installed with the above steps. Everything went well and root checked showed phone is rooted
Anyhow I think phone is not properly installed as USB mass storage enabler is warning so. I installed SG USB Mass Storage Enabler from playstore and when opened, it asked for root permission, gave it. Anyhow its showing your device is not rooted though its listed in SuperSu app tab. It would be great if someone can help me here as I have been trying to fix this for long and no luck.
That can be an app issue, not root issue.
Here's another rooting guide for SM-J530F/DS (Dual Sim) stock ROM. Even with Lineage OS my hardware model (ordered March 2018, EU SIM card only) tends to mute the main speaker after rooting. This rooting method works for me and is based on the work of others, especially ananjaser1211 and Abdullah_a86.
Make a backup of everything and make sure that the backup is usable. You are responsible if following this description and flashing bricks your phone. It did work for me which does not mean that it also works for you.
Enable Developer options. (Settings, About phone, Software information, tap a few times on Build number)
OEM unlock the phone. (Settings, Developer options, OEM UNLOCK: enable - otherwise you will bootloop)
Reboot into download mode.
Flash J530F_TWRP_3.2.1.0.tar (in AP) with Odin.
Now TWRP is installed and you should be able to use your phone as usual or to boot into TWRP recovery.
Rooting will erase everything, verify your backup again unless this is a new phone.
Reset the phone. (Open Settings, About Phone, (Looking for something else?) RESET, Factory data reset, Reset, DELETE ALL)
Reboot into recovery, a cleanup script will run and reboot after a few seconds.
Reboot into recovery again, install SuperSu and reboot (wipe nothing).
Starting takes a little time, after running the initial setup SuperSU is installed and the speaker works as expected.
I started here a few times after no-sound, no-root and/or bootloop experiences with LineageOS, CF-Autoroot and Magisk. If you upgrade to this firmware version you can no longer downgrade to a previous firmware version. Follow this only if you break something, want to un-root, update your firmware and/or start from scratch:
Force a reboot if necessary and then boot into download mode. All data on the phone will be lost.
Flash the J530FDBT2ARB3 firmware with Odin (AP*, BL*, CP* and CSC*. Do not use HOME_CSC*).
Now you have again a phone with stock firmware without root.
Links:
Odin (3.12.3): https://samsungodin.com/download/
TWRP (3.2.1-0): https://forum.xda-developers.com/ga...twrp-samsung-j5-pro-twrp-3-1-10-v2-0-t3728233
SuperSU (2.82): https://forum.xda-developers.com/ga.../guide-root-samsung-galaxy-j5-pro-sm-t3720446
Optional (also older firmware or a firmware backup may be used):
Firmware (Android7 J530FDBT2ARB3 2018-02-08): https://www.sammobile.com/firmwares/galaxy-j5/SM-J530F/DBT/download/J530FXXU2ARB3/210251/
Hints:
Power+Home+VolumeUp = Recovery
Power+Home+VolumeDown = Download Mode
Power+VolumeUp+VolumeDown = Force Reboot
PS: If a mod wants to move the thread to https://forum.xda-developers.com/ga...17-roms-kernels-recoveries--other-development please just do it and remove this comment. My reputation is too low to post there.
Hello, could you help me ? Odin doesn't recognize it, pc shows drivers being installed, but nothing shows up on odin, tried different version of odin.
aofthe said:
Hello, could you help me ? Odin doesn't recognize it, pc shows drivers being installed, but nothing shows up on odin, tried different version of odin.
Click to expand...
Click to collapse
Enable OEM unlock and USB debugging in developer options
garylawwd said:
Enable OEM unlock and USB debugging in developer options
Click to expand...
Click to collapse
Yeah, they were already enabled.
Hello again, i managed to fix Odin problem, it installed Twrp and said pass, with green, but when i tried to enter recovery mode, it went downloading, and the no command, phone boots normally, but i got no recovery, any suggestions ?
Download Mode Fix
aofthe said:
Hello again, i managed to fix Odin problem, it installed Twrp and said pass, with green, but when i tried to enter recovery mode, it went downloading, and the no command, phone boots normally, but i got no recovery, any suggestions ?
Click to expand...
Click to collapse
I think this might fix you booting into download mode problem try this post. Read "how to fix" near the bottom. Please Thank us if it does. This same thing happened to me and I wish I stumbled across this earlier because I figured this out on my own by just messing around going from recovery to download mode and it eventually fixed itself.
Hello evrybody,
I have a SM-T280 tablet i use since a coup;e of year with the "Tinker" ROM.
I was happy with this rom but decided to flash a stock ROM before to give the tablet to my son but forgot to enable the "OEM dev" option before to flash the new rom with Odin.
Now i'm stuck with a tablet without system and i can see the dangerous message "CustomBinary (KERNEL) Blocked by FRP Lock" on the tablet screen in Download mode.
How can i fix it please ? I know a lot of thread talked about (especially for SM-T580) but i can succeed to flash any thing. Always have this message (tried to flash TWRP, 2 stock ROOM and TINKER).
Thank you and sorry for my approximative english
Fixed !
I finally succed doing those steps :
1. Download combination files on the computer
(samsungcombinationfile.com/samsung-sm-t280)
2. Flash the combination files with Odin (AP slot)
3. Install FRP helper on the computer
(gsmfavor.com/2017/01/samsung-frp-helper-v02-frp-removal.html)
4. Follow the "how to" (webpage step 3)
5. Power on the device and in the DEV setting, activated the "USB debug" option
6. Power off the device
7. Flash an old official firmware wth Odin (AP slot)
(samsung-firmware.org/download/Galaxy__Tab__A__-2016%2C__7.0%2C__Wi-Fi-__/9z98/XAR/T280XXU0APH3/T280XAR0APH3/)
8. Unlock FRP entering my google account
9. Restart the device and delete the google account
10. Flash my favorite ROM (Tinker) with Odin AP slot.
I don't know why but i haad to repeat 2 times the sequence from the steps 2 to 6 before to be abble to flash the old oficial ROM...
Hope this can help anybody !