yesterday i updated to lollipop after flashing with nexus root toolkit .
now my mic is not working . i know its a software issue because before update it was working fine .
i've tried following things so far :
1.rebooting
2.restoring
3.using awsome player instead of nuplayer in developer option
4.flashing again
5.downgrading
6.wiping everything
7.flashing radio image of kitkat
any ideas ?
Related
Hey Guys , I ' m New To Android And New On Xda . I Updated My Yureka To Lollipop Yesterday And I Couldn ' t Tolerate The Lags And Issues So I Decided To Flash MIUI 6 From http://forum.xda-developers.com/yureka/development/rom-miui-v5-2-27-yureka-t3043035 . When I Flashed It According To 2nd Video Instruction By Dj408 , I Had Random Reboot Issue . I Really Dont Want To Go Back To Cm12 Unless The 'Issues Are Solved , Also Wanna Try MIUI . So Please Let Me Know If It ' s Possible To Install The MIUI 6 On My Yureka .
If It Helps :
- I Followed Mounting And Formatting Instructions Exactly As Mentioned In 2nd Video Using CWM , No Mistakes
- I Installed The Rom From SdCard1 Because I Had Not Copied It In Phone Memory
- Also , Before Random Reboot , During MIUI Setup , Wifi Networks Were Not Showing While They Worked On My CM12
- I Did Not Get The Message That Stock Recovery Would Be Installed After Clicking On Reboot System Now
Any Help Would Be Greatly Appreciated . Thanks In Advance
techfreak.rawmess said:
Hey Guys , I ' m New To Android And New On Xda . I Updated My Yureka To Lollipop Yesterday And I Couldn ' t Tolerate The Lags And Issues So I Decided To Flash MIUI 6 From http://forum.xda-developers.com/yureka/development/rom-miui-v5-2-27-yureka-t3043035 . When I Flashed It According To 2nd Video Instruction By Dj408 , I Had Random Reboot Issue . I Really Dont Want To Go Back To Cm12 Unless The 'Issues Are Solved , Also Wanna Try MIUI . So Please Let Me Know If It ' s Possible To Install The MIUI 6 On My Yureka .
If It Helps :
- I Followed Mounting And Formatting Instructions Exactly As Mentioned In 2nd Video Using CWM , No Mistakes
- I Installed The Rom From SdCard1 Because I Had Not Copied It In Phone Memory
- Also , Before Random Reboot , During MIUI Setup , Wifi Networks Were Not Showing While They Worked On My CM12
- I Did Not Get The Message That Stock Recovery Would Be Installed After Clicking On Reboot System Now
Any Help Would Be Greatly Appreciated . Thanks In Advance
Click to expand...
Click to collapse
Right now your on CM12 right..... Well sadly I have to say if your on CM12 then you can't downgrade your os now cox cm12 for yureka is based on 64bit and its already instructed before releasing the update and highly mentioned... Do not try to flash CM11 if your flash CM12 other wise your phone will be hard bricked.....
thanks for the reply . i really hate lollipop on yureka , m facing lots of issues like heating on normal usage and slow charging . i hope we get a MIUI port for lollipop soon . will be using unofficial cm12.1 for now
??? I wonder how your handset is still alive after flashing MIUI over cm12s and how you were able to flash unofficial CM12 (32bit) over it again?
[email protected] said:
??? I wonder how your handset is still alive after flashing MIUI over cm12s and how you were able to flash unofficial CM12 (32bit) over it again?
Click to expand...
Click to collapse
yeah , i updated to cm12 lollipop but it had many bugs so tried to flash MIUIv6 ( had no idea downgrade is not supported and might hard brick ) . i had frequent reboot issue on MIUI ROM even after following every instruction correctly . then i switched back to the buggy cm12 . found cm12.1 unofficial on xda and flashed it and the bugs and lags are gone , at least for now . . .
techfreak.rawmess said:
Hey Guys , I ' m New To Android And New On Xda . I Updated My Yureka To Lollipop Yesterday And I Couldn ' t Tolerate The Lags And Issues So I Decided To Flash MIUI 6 From http://forum.xda-developers.com/yureka/development/rom-miui-v5-2-27-yureka-t3043035 . When I Flashed It According To 2nd Video Instruction By Dj408 , I Had Random Reboot Issue . I Really Dont Want To Go Back To Cm12 Unless The 'Issues Are Solved , Also Wanna Try MIUI . So Please Let Me Know If It ' s Possible To Install The MIUI 6 On My Yureka .
If It Helps :
- I Followed Mounting And Formatting Instructions Exactly As Mentioned In 2nd Video Using CWM , No Mistakes
- I Installed The Rom From SdCard1 Because I Had Not Copied It In Phone Memory
- Also , Before Random Reboot , During MIUI Setup , Wifi Networks Were Not Showing While They Worked On My CM12
- I Did Not Get The Message That Stock Recovery Would Be Installed After Clicking On Reboot System Now
Any Help Would Be Greatly Appreciated . Thanks In Advance
Click to expand...
Click to collapse
i am facing problem i have installed tge miui 6 on my yureka its does not contains gapps n when i am steaming audio it trips sometimes plz help me out :'( thanks in advance ......
Hello,
I was running cm11 jfte a while, and works perfect.
But i wanted to try cm12 so installed 12.1 jftexx
And i was not charmed of lollipop .
so i did go back to cm11 jfte after a few weeks i found out that my gps not work (not us gps every day).
gps test app found nothing.
installed back to stock not working
clear install cm11 not working
install cm12.1 again gps works.
i use gps test app for testing the gps.
But i want cm11 how can i go back with a working gps?
give this app a shot , https://play.google.com/store/apps/details?id=tisinadev.activegps
Maybe you baseband has changed? Or try to set the agps to your location .
I tryed different GPS aps but nothing helps.
My son had the same s4 but runs still cm11 witch i also had exact same version..
Cm12 did change something
spikehome said:
I tryed different GPS aps but nothing helps.
My son had the same s4 but runs still cm11 witch i also had exact same version..
Cm12 did change something
Click to expand...
Click to collapse
Had the same issue. Installed CM12.1 but went back to 5.0.1 GPE: No GPS anymore.
Fixed it by flashing Stock Firmware with Odin, installed TWRP again and flashed my GPE rom again.
I tryed stock with Odin already.
Not helped
Dear Community,
I hope that this is the right place to post and any of you can help me.
My (aktual) Hardware/Software bits:
Galaxy Note 3 (SM-N9005)
Android: 5.1.1
Baseband-Version: N9005XXUGBOD3
Kernel-Version 3.4.108-f2fs-temasek-cm12.1-hlte-v1.25+
temaseksnappy #1
Temasek unofficial version V16.4
Build: LMY48J test-keys
Recovery: twrp 2.8.7.0-hlte-4.4
My actual problem is the following: My Note 3 by default had a 4.4.2 OFW on it, which I early upgraded to Lolipop 5.0.1. Everything works for the OFW 4.4.2 and 5.0.1 fine. As soon as I try to flash it with a CFW like CM11, CM12, CM12.1, CM12.1 (temaseksnappy), Gummy 4.4.4 I am losing the feature of auto rotation.
Of cource I did a clean flash, wiping DALVIK/CACHE/DATA and system, double time even one befor the flash, one after.
I also tried to put the battery, sim and sd out for few min before rebooting, while autorotation is manualy turned off.
Even a MODEM I flushed to fix this issue, but without success. Nothing helps but going back to OFW.
My last try was downgrading to the original 4.4.2, including baseband trieing from there to go to any CFW (CM11) as well as from OFW 4.4.2 -> OFW 5.0.1 -> CFW 5.1.1 (http://forum.xda-developers.com/galaxy-note-3/development/hlte-spr-vzw-temaseks-unofficial-t2953375)
There was also a post about a possible missing or broken lib in /system/lib which I replaced
Nothing helps (libGNU... something). This helped me alreay once in OFW after kicking out all the junk apps, but this is a different storry and not related anyhow.
Is there anybody out there who has the same problem or even better knows a solution?
My shot would be that:
1) CM has a problem with my particular hard-/software (Kernel, Baseband, Recovery, whatever) as I just tied CM or at least CM based CFWs.
PLEASE HELP.
Thank you very much in advance.
After about almost a year I cam back, giving again a try to CM, However I still have the same issue. Finally Anybody please!
Do you have the same issue with touchwiz 5.1.1 and 6.0.1?. Not the cm/aosp roms which aren't samsung based.
Sent from my SM-N920C
Rosli59564 said:
Do you have the same issue with touchwiz 5.1.1 and 6.0.1?. Not the cm/aosp roms which aren't samsung based.
Sent from my SM-N920C
Click to expand...
Click to collapse
Hello,
Thx for your reply. Right now I am on CM13 (temasek hlte v9.6)
http://forum.xda-developers.com/galaxy-note-3/development/hlte-spr-vzw-temaseks-unofficial-t2953375
This might should be specially compiled for sm-n9005 like mine.
Everything expect rotation works fine. However The accelleration is also working fine as I tested with "sensor test". Even the integrated camera App is rotating, however the rest is not.
In addition I downloaded "adaptive rotationfree", If I set it "stock Auto" nothing happens, but if I set it to "force auto" the rotation will work exacly once and then stops undtil I force it to portrait again.
What do you mean exactly with "touchwiz"? Is this jus a different kernel or a whole CFW?
As I wrote in the frist post I tried already a lot of CFW and ALL had this issue, but the OFW ;(
What shell I flush to get this working, which is not OFW?
BIG THX for YOUR HELP
Touchwizz is the firmware that comes with the stock Samsung firmware .
Also in custom Samsung based roms .
Hello,
thx for the tip with TouchWiz vs aosp. At the moment I am running "DarkLord N5 Release Candidate 2.12" which can get find here: http://forum.xda-developers.com/galaxy-note-3/development/rom-darklord-s6-port-alpha-t3083087
This Rom is TouchWiz Based and guess what ....
Autorotation works.
However I do not understand what the problem realy is and would prefer to run cm13 insteat. I mean even samsung devices got a accellerator within which works also fine with AOSP software, showing numbers moving while turning the phone. In addition for example on the post http://forum.xda-developers.com/galaxy-note-3/development/hlte-spr-vzw-temaseks-unofficial-t2953375 it is said that this is explicite for note 3 including the model n9005. So ...
Can anybody point me to the problem or even better to the fix?
Is there any chance CM would fix this?
Regards
Hi,i have a problem with phone of my wife ... the phone is very hot and sometimes make some glitch image or reboot the phone ,is normal ?
Today i install 6.0 and i go to see if the problems exist . I will test 5.0 too tomorrow.
i have test this :
remove sd card
wipe data and cache
remove some programs in android
- The phone is full stock with 6.0
in general lollipop is more stable
revert back and see the results
Ok i will test first software 6.0 again from 2017 and the i go to 5.0
and Battery replace ?
disaster2009 said:
Ok i will test first software 6.0 again from 2017 and the i go to 5.0
and Battery replace ?
Click to expand...
Click to collapse
make sure that Force GPU rendering in developer options is ON
I have test and is ok for now !
I Just update last android 6.0 with Odin.
I go see in developer option !
The version 5 runs very well, play games and all around phone ok
The version 6 reboots and a lot of problems ...
anyway to stop update to 6.0 when i got stock rom 5.0 ? i have disable in menu but download automatic and install later
anyway to stop the download firmware 6.0 ? thanks.
Hi, the software original 5.0 or 6.0 have heating problems and already tested with 2 different batteries . Anyway to underclocking in original rom ?
After installing customize rom speaker , microphone , fingerprint , video playback not working . how can i fix this ?:crying:
Which rom ? Q ROMs are beta and testing. Flash latest firmware for pie and q roms. For the rest be patient and let the devs do their great work.
the PE10 official beta is best q rom right now i tried other roms and found some bugs now i'm using PE10 official beta and everythings working fine camera, audio, calls, data, fingerprint sensor, wifi, Bluetooth etc.
GirishMondal said:
After installing customize rom speaker , microphone , fingerprint , video playback not working . how can i fix this ?:crying:
Click to expand...
Click to collapse
Please be more specific and keep an order.
If possible, report your problem at ROM's maintainer's thread.
Wet need a lot more info to start to work with.