Dead, Unbrick, Debrick F460. Dead/boot security error/boot loop kitkat,lollipop version bootloaders, 9006, 9008 modes
FIRST install lg united mobile drivers, connect mobile with battery to pc, check in device manager com ports if 9006 or 9008 mode.
if you can go into custom recovery mode twrp/cwm, then it easy to fix... u need to flash zip.but your self have to make it right now of same version. here the link tutorial.. http://forum.xda-developers.com/showthread.php?t=2451696 OR try adb or terminal command or u need to make zip file. i lost that link. better try ubuntu method also.
CASE1:
if 9006 or 9008 mode, ROOTED,on lollipop/kitkat/marshmallow before phone dead but rooted, first try debrick sdcard which is simpler, then use ubuntu method. this works only if rooted before phone dead. only root access allows to rewrite files on partition here is the link http://forum.xda-developers.com/showthread.php?t=2582142
CASE2:
only 9008 mode, phone dead on lollipop/kitkat/marshmallow, not rooted, then try debrick image and Ubuntu methods. sucess rate is very low.
Guys!
the sdcard debrick may success. then these files can debrick it.
OUr devices can be fixed. After lot of research i found it. kindly go through the link given below for tutorial and do debrick. You need to try from 140 to 220. hope YOU THANK ME HERE is the Link http://m.blog.naver.com/kangmincraft/220675995736
http://m.blog.naver.com/kangmincraft/220626785379
debrick 140 https://drive.google.com/file/d/0BwKzoXanfz0jMFh1OXJ2QnROUWM/view
debrick 160 https://drive.google.com/file/d/0BwKzoXanfz0jemxYR0VNcnZULXc/view
debrick 180 https://drive.google.com/file/d/0BwKzoXanfz0jb2R4eGIzV1BHeGM/view
debrick 200 https://drive.google.com/file/d/0BwKzoXanfz0jUHBTelc4VzlQT2M/view
debrick 220 https://drive.google.com/file/d/0BwKzoXanfz0jZFBXaFRLMFJVWGc/view
try this, this is my own debrick lollipop: https://drive.google.com/file/d/0B09V79Pt4dCUSjF0ZUhNRWxiQ0k/view?usp=drive_web
Read this post who unbricked his dead mobile http://forum.xda-developers.com/showpost.php?p=66264994&postcount=14
just poweron the device after inserting the sdcard. check few times. try to go download mode.
use google translator if needed.
TIPS
sdcard miniumum 4GB, use old sdcards first. then latest memory cards, try sdcard memory higher than phone memory is advantage. try these 3 types.
debrick140 worked for most of them. try this first if you are on lollipop.
Lollipop bricked roms have higher luck.
after successful unbrick, use poweriso/ultraiso to format sdcard. i used poweriso>tools>cleanusb. then format in your pc.
ATTENTION MARSHMALLOW: IF YOU NO ROOT, NO CUSTOM TWRP, NO DOWNLOAD MODE. THEN THERE IS NO DEBRICK IMAGE YET. NOTHING WORKS. GIVE TO REPAIR RIFF,OCTOPUS BOX. THIS GUY SELLING SOUTION https: //www. facebook.com/ giaiphapandroid/. (remove spaces)IF BOUGHT, SHARE THE LINK HERE . i am not seller,i don't vouch anyone here. just helping so that you help others.
if you have friends in vietnam/korea ask them to search MM debrick and share here. if anyone have solution for MM. kindly share here.
SENIOR XDA: I REQUEST YOU TO CREATE DEBRICK FOR MARSHMALLOW.
THANK ME IF USEFUL....
Credits to Vega_Kangmin.
all copyrights to respective owners. i made simpler type. so if read all and google search, everything you can get in detail.
Reply
Hi. My name is kangmin
And you can call me 'Vega'
At first.
That debrick.img is for G3 Cat.6 (F460 S/K/L.) In korea.
So, it didn't work for international phone
(Like G3 Prime.. Maybe.. Not sure.)
And second. This debrick.img file is for kitcat,lollipop.
It didn't work for mashmellow.
Vega_Kangmin said:
Hi. My name is kangmin
And you can call me 'Vega'
At first.
That debrick.img is for G3 Cat.6 (F460 S/K/L.) In korea.
So, it didn't work for international phone
(Like G3 Prime.. Maybe.. Not sure.)
And second. This debrick.img file is for kitcat,lollipop.
It didn't work for mashmellow.
Click to expand...
Click to collapse
Hello Vega,
yes, we need this for G3 Cat.6 (F460 S/K/L.).
Thank you for your hardwork.
how are you? i have been researched all your blog today and tired translating it to english, but still i cannot understand few words. KINDLY MAKE HERE ENGLISH TUTORIAL PLEASE.
my mobile is boot security error when downgrade from marshmallow to lollipop, 5%, laf error. so i need debrick image for F460S30c_00_1223 marshmallow version. could you please make a debrick image for it?
waiting for your private message reply
Okay. I'll going to write for english
But, i don't have much times because, i have an exam
So, i'll write it as soon as possible..!
Help me Vega
Hi Kathik, I have got a problem with my LG G3 Cat.6 F460k, no download mode, no recovery, no power on, no fastboot , only qualcomm hs-usb qdloader 9008 in windows device manager, tell me, You could please tell me what program I can use to fix this problem, I don’t have the files to use in the boarddiag application, because my g3 uses the APQ8084 chipset for the 805 snapdragon processor. Please brother, help me.
Vega_Kangmin said:
Okay. I'll going to write for english
But, i don't have much times because, i have an exam
So, i'll write it as soon as possible..!
Click to expand...
Click to collapse
Thank you brother!!
Thank you Kathik, I will try this method tomorrow in my Lg G3 F460K, then I will write the results, I have many faith in this!! By the way, thank you too for guide me via whatsapp Kathik, you are a truly hero bro!!!!
:good:
manowar24 said:
Hi Vega, I have got a problem with my LG G3 Cat.6 F460k, no download mode, no recovery, no power on, no fastboot , only qualcomm hs-usb qdloader 9008 in windows device manager, tell me, You could please tell me what program I can use to fix this problem, I don’t have the files to use in the boarddiag application, because my g3 uses the APQ8084 chipset for the 805 snapdragon processor. Please brother, help me.
Click to expand...
Click to collapse
manowar24 said:
Thank you brother, I will try this method tomorrow in my Lg G3 F460K, then I will write the results, I have many faith in this!! By the way, thank you too for guide me via whatsapp, you are a truly hero bro!!!!
:good:
Click to expand...
Click to collapse
Welcome bro. hope you fix and share it here
Vega_Kangmin said:
Okay. I'll going to write for english
But, i don't have much times because, i have an exam
So, i'll write it as soon as possible..!
Click to expand...
Click to collapse
Vega. do we need to press any buttons to go into fast boot mode after mounting sdcard? kindly search Marshmallow debrick and share the link please.
manowar
manowar24 said:
Hi Kathik, I have got a problem with my LG G3 Cat.6 F460k, no download mode, no recovery, no power on, no fastboot , only qualcomm hs-usb qdloader 9008 in windows device manager, tell me, You could please tell me what program I can use to fix this problem, I don’t have the files to use in the boarddiag application, because my g3 uses the APQ8084 chipset for the 805 snapdragon processor. Please brother, help me.
Click to expand...
Click to collapse
hi manowar.
you can solve the problem with using debrick.img files.
go to the link and solve the problem!
Hello Vega and Kathik, I have not done the process yet, I will do it tonight, and then I will inform the results.
I also wanted to thank you for the hard work you are doing in publishing this tutorial and translate it into English, I know you're still working on it, but so far it is understandable and looks promising.
I have some questions to you, to clarify the process that will perform tonight, please, answer me this:
I just have a 32 GB microSD Class 10, does this serve? Or it is too large in capacity? (By the way, my Lg G3 F460K is 32GB of storage and 3GB of RAM, it has Android Lollipop 5.0.1 with HOANG LAM CAT6 1.6 ROM and it was rooted)
When I will do the format to the microSD card, before passing by the win32Disk, what format I give it? ¿FAT32 or NTFS? Or the Win32 software do it for me when it will formated the microSD?
After inserting the microSD prepared, simply press the button on/off on the phone? Or I must do any combination of on/off + vol + or any other?
It is rare to found any solution for this korean model, there are only solutions for the international models, but it seems there is nothing for the Korean model (F460L,S,K). I hope that this work will help many people in this situation and prevent all those who are paying for solving this problem.
Please brothers, answer my questions and I will do the rest. Many thanks!!!
Vega_Kangmin said:
hi manowar.
you can solve the problem with using debrick.img files.
go to the link and solve the problem!
Click to expand...
Click to collapse
I´m in the process but....
Hello brothers, good news, my phone is now in Fastboot mode, I´m working with the ADB and CMD commads, but I have several troubles, please help me in this:
I dont have de file "misc.bin", when I disarmed the original KDZ file (kitkat or lollipop) doesnt appear this file. Do you have it? Please send me or letme download it
I cant erase o create the nexts files with the commads: BackupGPT.bin neither PrimaryGPT.bin, I recibe this message when I tried: "Failed: partition table doesn´t exits"
Brothers please help me on this!! I´m very close to fix my f460 all thanks to you!!
Hello brothers Vega and Kathik, good news, thanks to you I could get my phone back, it is now 100% operational, I would not have been achieved this without your support. However, some things did not go as shown in the tutorial, so I'll detail everything I did with my F460K to help everyone with this problem. Thanks to Kathik an d Vega for the debrick files, they are the key to solve this problem.
I am very happy, now I'll help whoever needs it , as Vega and Kathik helped me!!
THANK YOU TOO TO ALL MEMBERS OF XDA, WHO HELP ME IN SOMEWAY.
:good::good::good::good:
manowar24 said:
Hello brothers Vega and Kathik, good news, thanks to you I could get my phone back, it is now 100% operational, I would not have been achieved this without your support. However, some things did not go as shown in the tutorial, so I'll detail everything I did with my F460K to help everyone with this problem. Thanks to Kathik an d Vega for the debrick files, they are the key to solve this problem.
I am very happy, now I'll help whoever needs it , as Vega and Kathik helped me!!
THANK YOU TOO TO ALL MEMBERS OF XDA, WHO HELP ME IN SOMEWAY.
:good::good::good::good:
Click to expand...
Click to collapse
Welcome! happy to hear from you. share your experience here to help others.
do you wanna upgrade to MM? just follow this link http://forum.xda-developers.com/lg-g3/general/update-downgrade-root-lg-g3-f460-s-k-l-t3353542
How I bring back my G3 F460 from Death
Hello, I'll explain you all how I recovered my LG G3 F460K from death, I must first thank @Kathik and @Vega_Kangmin for their guidance, tutorials and files, without them I would not have been able to recover my phone, the steps are basically as they are explained in Vega_Kangmin´s tutorial:
http://m.blog.naver.com/kangmincraft/220675995736
However, I found some differences that stopped me so I had to read and research in Google to make decisions and to continue with the process.
These are the steps that I follow:
1. Download all programs and files suggested in Vega_Kangmin´s tutorial.
2. I extracted the files from the original KDZ Lollipop (F460K20C_00.kdz) and put it in the folder that I call “ADB”. (My G3 had the Lam Hoang 1.6 Android 5.0.1 Rom and was rooted with debugging enabled).
3. With the Win32Disk Imager I make the first boot image to use in the phone with a microSD card, first I try with the debrick image called “debrick140.img” and the screen did nothing, unanswered. Then with the win32Disk Imager I created the image boot with 160MB and bingo!! It works!!, the screen showed the LG logo and immediately fell in Fastboot mode. Here I tell you my first warning: the only microSD card that I have was a 32GB Class 10, so I used it, then the win32Disk Imager program created in it a new partition table and reduced the 32Gb capacity only to 85MB, so after I had saved my phone, I have to save my microSD card, for that, I used Ubuntu, and one program called “Gparted” I uses it to redefine the partition table. So, beware!!!
4. I opened a CMD´s window in the folder "ADB" (shift + right click, click on "open a command window here"), plugged my phone in the PC (Windows installed the drivers of ADB interface and immediately it recognized) and I wrote my first command to verify that everything was in order:
fastboot devices
If all goes well it should show up this:
List of Devices attached
LGF460XXXXXXX device
Then I proceeded with the ADB commands, but in the tutorial I found some errors in the syntax of the commands and the order they should be done, the correct syntax is:
To remove files the syntax is ok, example: fastboot erase aboot
This is the syntax to flash new files is: fastboot flash aboot aboot.bin
(Don´t forget to change names of the extracted kdz files)
And the order for all the process in the ADB pront is this:
fastboot erase aboot
fastboot flash aboot aboot.bin
fastboot erase boot
fastboot flash boot boot.bin
fastboot erase laf
fastboot flash laf laf.bin
fastboot erase rpm
fastboot flash rpm rpm.bin
fastboot erase recovery
fastboot flash recovery recovery.bin
fastboot erase modem
fastboot flash modem modem.bin
fastboot erase SBL1
fastboot flash SBL1 sbl1.bin
fastboot erase tz
fastboot flash tz tz.bin
fastboot erase sbi
fastboot flash sbi sbi.bin
fastboot reboot
exit
Note: none of these files should be used BackupGPT.bin, PrimaryGPT.bin (if you use it the ADB will return an error saying that these tables do not exist, the file misc.bin neither will use because we do not have it and it isn´t important to revive the G3, this information I got it from here:
"YOU NEED TO EXTRACT 10 FILES FROM TOT (if you use a tot file) (aboot, boot, SBL1, dbi, laf, recovery, modem, misc, rpm, tz) and 9 FILES FROM KDZ (this is our case for the Lg G3) (misc file is not present in KDZ so dont worry it is not important) "
That out of here, please read it:
http://forum.xda-developers.com/android/general/unbrick-lg-model-download-recovery-t3060184 -----> Thanks to @hacklockx
5. After restarting the phone it show up the LG logo (this is a good news), so flash an official ROM with the LG Flash Tool as you already know and enjoy our super phone again.
By the way, in my case, after the process restart with the ADB commands, my phone start normally with all my stuff installed, I lost nothing, as if nothing had ever happened, however, I noticed slow and the camera didn´t work so I flash it with the official rom F460K20C_00.kdz and it was like new. Then I rooted it, installed the TPWR and flash again the Lam Hoang 1.6 ROM with Android 5.0.1, then installed the Xposed and that´s all!!
I hope you serve!!
Greetings from Venezuela :good::good::good:
Guys, I need help. My F460L is bootlooping but I can still access download mode. I tried flashing stock MM with LG Flash Tool but it is still bootlooping, what do I need to do?
Jinyung411 said:
Guys, I need help. My F460L is bootlooping but I can still access download mode. I tried flashing stock MM with LG Flash Tool but it is still bootlooping, what do I need to do?
Click to expand...
Click to collapse
Try these options:
1. Change your battery, try another one, in my case I have two battery, one cause endless bootloop on my G3.
2. Use the "LG Mobile Support Tool", install the program, open it, connect your G3 and see the magic happens :good:
Good luck bro
manowar24 said:
Try these options:
1. Change your battery, try another one, in my case I have two battery, one cause endless bootloop on my G3.
2. Use the "LG Mobile Support Tool", install the program, open it, connect your G3 and see the magic happens :good:
Good luck bro
Click to expand...
Click to collapse
I tried using LG Mobile Support Tool but it does not work either. I'll try the battery, thanks. Will report back.
Jinyung411 said:
I tried using LG Mobile Support Tool but it does not work either. I'll try the battery, thanks. Will report back.
Click to expand...
Click to collapse
check this link. downgrade to Lollipop. follow this link http://forum.xda-developers.com/lg-g3/general/update-downgrade-root-lg-g3-f460-s-k-l-t3353542
THANK ME IF I HELPED YOU. also MUST write feedback
Kathik said:
Dead, Unbrick, Debrick F460. Dead/boot security error/boot loop kitkat,lollipop version bootloaders, 9006, 9008 modes
FIRST install lg united mobile drivers, connect mobile with battery to pc, check in device manager com ports if 9006 or 9008 mode.
if you can go into custom recovery mode twrp/cwm, then it easy to fix... u need to flash zip.but your self have to make it right now of same version. here the link tutorial.. http://forum.xda-developers.com/showthread.php?t=2451696 OR try adb or terminal command or u need to make zip file. i lost that link. better try ubuntu method also.
CASE1:
if 9006 or 9008 mode, ROOTED,on lollipop/kitkat/marshmallow before phone dead but rooted, first try debrick sdcard which is simpler, then use ubuntu method. this works only if rooted before phone dead. only root access allows to rewrite files on partition here is the link http://forum.xda-developers.com/showthread.php?t=2582142
CASE2:
only 9008 mode, phone dead on lollipop/kitkat/marshmallow, not rooted, then try debrick image and Ubuntu methods. sucess rate is very low.
Guys!
the sdcard debrick may success. then these files can debrick it.
OUr devices can be fixed. After lot of research i found it. kindly go through the link given below for tutorial and do debrick. You need to try from 140 to 220. hope YOU THANK ME HERE is the Link http://m.blog.naver.com/kangmincraft/220675995736
http://m.blog.naver.com/kangmincraft/220626785379
debrick 140 https://drive.google.com/file/d/0BwKzoXanfz0jMFh1OXJ2QnROUWM/view
debrick 160 https://drive.google.com/file/d/0BwKzoXanfz0jemxYR0VNcnZULXc/view
debrick 180 https://drive.google.com/file/d/0BwKzoXanfz0jb2R4eGIzV1BHeGM/view
debrick 200 https://drive.google.com/file/d/0BwKzoXanfz0jUHBTelc4VzlQT2M/view
debrick 220 https://drive.google.com/file/d/0BwKzoXanfz0jZFBXaFRLMFJVWGc/view
try this, this is my own debrick lollipop: https://drive.google.com/file/d/0B09V79Pt4dCUSjF0ZUhNRWxiQ0k/view?usp=drive_web
Read this post who unbricked his dead mobile http://forum.xda-developers.com/showpost.php?p=66264994&postcount=14
just poweron the device after inserting the sdcard. check few times. try to go download mode.
use google translator if needed.
TIPS
sdcard miniumum 4GB, use old sdcards first. then latest memory cards, try sdcard memory higher than phone memory is advantage. try these 3 types.
debrick140 worked for most of them. try this first if you are on lollipop.
Lollipop bricked roms have higher luck.
after successful unbrick, use poweriso/ultraiso to format sdcard. i used poweriso>tools>cleanusb. then format in your pc.
ATTENTION MARSHMALLOW: IF YOU NO ROOT, NO CUSTOM TWRP, NO DOWNLOAD MODE. THEN THERE IS NO DEBRICK IMAGE YET. NOTHING WORKS. GIVE TO REPAIR RIFF,OCTOPUS BOX. THIS GUY SELLING SOUTION https: //www. facebook.com/ giaiphapandroid/. (remove spaces)IF BOUGHT, SHARE THE LINK HERE . i am not seller,i don't vouch anyone here. just helping so that you help others.
if you have friends in vietnam/korea ask them to search MM debrick and share here. if anyone have solution for MM. kindly share here.
SENIOR XDA: I REQUEST YOU TO CREATE DEBRICK FOR MARSHMALLOW.
THANK ME IF USEFUL....
Credits to Vega_Kangmin.
all copyrights to respective owners. i made simpler type. so if read all and google search, everything you can get in detail.
Click to expand...
Click to collapse
Hey, will this work on the D851?
If not, how do i create a debrick image for the D851?
Regards Mickey.
mickeyasamoah said:
Hey, will this work on the D851?
If not, how do i create a debrick image for the D851?
Regards Mickey.
Click to expand...
Click to collapse
only these can help you by software by money or assistance. just help. not vouch or i don;t get anything from this. your wish. remove spaces
androidbrick . com
https :// www. facebook .com/ giaiphapandroid
http :// www. vungoc -mobile. com/
if don;t wanna risk. better give to repair jtag/octoplus box which 100% fix this.
Hello everybody. Im asking for help and im pretty desperate for my issue.
I have LG G4 h815 20p which was rooted few years back. Then the phone died and got re-balled recently and it works now. But i can not access twrp by using Volume Down and Power buttons combination. I can go to Download mode where i can updated firmware using LG UP and it will be processed to the end and after the required reboot phone stays black and recognized only as qualcom device in device manager.
I can not use ADB as it will never show any devices under adb device neither fastboot devices. Drivers are installed. Tried bunch of different versions on both win10 and win7 but no luck. I also tried installing those on ubuntu, where the phone is seen as a device under lsusb but not under fastboot or adb.
I just want to get the phone up and running. NO matter if i unroot or keep it rooted. It wont be used as daily phone but im eager to fix it.
The phone lists bootloader unlocked on the top of the screen together with LG logo and then comes the android robot animation for 3-4 seconds then loops the same 2-3 times then goes black screen (shows as qualcom device in device manager).
Tried LG UP, LG flash tool neither helped. LG Flash tool wont even end as LG UP finishes but wont boot after the reboot when process is completed.
Any help please will be extremely highly appreciated. I am also willing to arrange team viewer if necessary for easiness.
sbelcovski said:
Hello everybody. Im asking for help and im pretty desperate for my issue.
I have LG G4 h815 20p which was rooted few years back. Then the phone died and got re-balled recently and it works now. But i can not access twrp by using Volume Down and Power buttons combination. I can go to Download mode where i can updated firmware using LG UP and it will be processed to the end and after the required reboot phone stays black and recognized only as qualcom device in device manager.
I can not use ADB as it will never show any devices under adb device neither fastboot devices. Drivers are installed. Tried bunch of different versions on both win10 and win7 but no luck. I also tried installing those on ubuntu, where the phone is seen as a device under lsusb but not under fastboot or adb.
I just want to get the phone up and running. NO matter if i unroot or keep it rooted. It wont be used as daily phone but im eager to fix it.
The phone lists bootloader unlocked on the top of the screen together with LG logo and then comes the android robot animation for 3-4 seconds then loops the same 2-3 times then goes black screen (shows as qualcom device in device manager).
Tried LG UP, LG flash tool neither helped. LG Flash tool wont even end as LG UP finishes but wont boot after the reboot when process is completed.
Any help please will be extremely highly appreciated. I am also willing to arrange team viewer if necessary for easiness.
Click to expand...
Click to collapse
Boot to fastboot and exec
fastboot format userdata
(will obviously erase the whole device including photos etc)
If that does not help you can use SALT to flash TWRP to the BOOT (!) partition. For that you must start SALT from the cli with --experimental argument. If you plan to use SALT I recommend using the latest mAid njghtly which has all already installed.
For flashing with SALT you also must do a custom backup of the sbl1 partition and place the twrp image in the same dir where the sbl1 backup is.
Sent from my OnePlus 7T Pro using XDA Labs
steadfasterX said:
Boot to fastboot and exec
fastboot format userdata
(will obviously erase the whole device including photos etc)
If that does not help you can use SALT to flash TWRP to the BOOT (!) partition. For that you must start SALT from the cli with --experimental argument. If you plan to use SALT I recommend using the latest mAid njghtly which has all already installed.
For flashing with SALT you also must do a custom backup of the sbl1 partition and place the twrp image in the same dir where the sbl1 backup is.
Sent from my OnePlus 7T Pro using XDA Labs
Click to expand...
Click to collapse
Hey, Thank you.
I found your stuff uploaded, but i really cant figure it out. Whenever i press Volume UP and Power button to keep them 6-7sec then plug usb cable, the phone misses the chance to go into download mode. So i have no opportunity to go into fastboot. But i can go in download mode but neither fastboot or salt finds the device.
Could you please provide some more info?
sbelcovski said:
Hey, Thank you.
I found your stuff uploaded, but i really cant figure it out. Whenever i press Volume UP and Power button to keep them 6-7sec then plug usb cable, the phone misses the chance to go into download mode. So i have no opportunity to go into fastboot. But i can go in download mode but neither fastboot or salt finds the device.
Could you please provide some more info?
Click to expand...
Click to collapse
fastboot and download mode are complete different things. you cannot use fastboot commands in download mode.
you have to provide more info:
how do you run mAid? VirtualBox or from an USB stick (recommended)
share the debug log of SALT when your device is in download mode (Advanced menu -> debug log -> upload button -> share just the link)
boot your device in download mode and THEN start mAid first could also help
.-
steadfasterX said:
fastboot and download mode are complete different things. you cannot use fastboot commands in download mode.
you have to provide more info:
how do you run mAid? VirtualBox or from an USB stick (recommended)
share the debug log of SALT when your device is in download mode (Advanced menu -> debug log -> upload button -> share just the link)
boot your device in download mode and THEN start mAid first could also help
.-
Click to expand...
Click to collapse
Hello again.
I figured mAid out. I run from live usb, and i can connect to phone and get the device information through Salt..
What i did:
- i use experimental flag with root privileges and device is read and comes info that my Laf fw does not support direct flashing. (i cant figure it out how this works),
- i made backup of sbl1 partition, downloaded twrp image twrp-3.3.1-PREVIEW-196_g4_MM.img, placed the twrp image in same folder where the backup of sbl1 is.
- Now i dont know how to flash the the twrp to the boot partition. I tried to find some guides but no luck. Yesterday for some reason i had Flash button in salt on the bottom, today it is not there. The way i start salt is by browsing inside /home/android/Desktop/LG directory and use sudo ./SALT.desktop --experimental command. I use the latest mAid from your file server 4.19.126-1-MANJARO - mAid_v2020-07-14_23-43_x86_64_forgetful.iso.
3 attachments are uploaded bellow. The debug log from salt was unable to upload and gave bunch of package errors, so it is attached bellow in a txt file as well.
The phone keeps stable connection in download mode.
Please advice. I am very grateful.
sbelcovski said:
Hello again.
I figured mAid out. I run from live usb, and i can connect to phone and get the device information through Salt..
What i did:
- i use experimental flag with root privileges and device is read and comes info that my Laf fw does not support direct flashing. (i cant figure it out how this works),
- i made backup of sbl1 partition, downloaded twrp image twrp-3.3.1-PREVIEW-196_g4_MM.img, placed the twrp image in same folder where the backup of sbl1 is.
- Now i dont know how to flash the the twrp to the boot partition. I tried to find some guides but no luck. Yesterday for some reason i had Flash button in salt on the bottom, today it is not there. The way i start salt is by browsing inside /home/android/Desktop/LG directory and use sudo ./SALT.desktop --experimental command. I use the latest mAid from your file server 4.19.126-1-MANJARO - mAid_v2020-07-14_23-43_x86_64_forgetful.iso.
3 attachments are uploaded bellow. The debug log from salt was unable to upload and gave bunch of package errors, so it is attached bellow in a txt file as well.
The phone keeps stable connection in download mode.
Please advice. I am very grateful.
Click to expand...
Click to collapse
you start SALT in experimental mode as this in a terminal:
Code:
~/programs/SALT/salt --experimental
anyways the problem is that your LAF version is 100004 so flashing will likely not be possible.. You can try it anyways by using the above cmd which will bring up the flash buttons.
before doing that rename the twrp image to recovery.img to ease up things.
then you select flash (folder) and ensure that anything else then the recovery image is selected (e.g. do not flash sbl1 etc).
also ensure that the target partition is named "recovery" then choose flash.
as said it will likely not work though as your download mode (LAF) is too new though. you could downgrade with LGup to Lollipop which will allow flashing with SALT for sure.
but back to the initial description, you mentioned that:
[...] after the required reboot phone stays black and recognized only as qualcom device in device manager.
[...]The phone lists bootloader unlocked on the top of the screen together with LG logo and then comes the android robot animation for 3-4 seconds then loops the same 2-3 times then goes black screen (shows as qualcom device in device manager).
These indicates very very likely the beginning of the ILAPO. you can check my signature for some workarounds though there is no proper way to fix it other then by replacing the mainboard.
.-