I use this USB host cable and it works great. Have tested it with my 750gb Oyen and 320gb WD Passport external HDD's, several usb flash drives (8-16gb), San disk USB memory card reader, and a USB keyboard.
For those having issues getting their Xoom to recognize USB storage devices here's what I've got and did to get it to work: I flashed my XOOM (3.1) to the 2.6.36.4 Tiamat_Xoom-v1.4.4-Full_Throttle Kernel and was unable to get the USBMount to recognize drives or storage at first. I installed USB Mass Storage Watcher from the market (it's free) and it works awesome! Can mount any storage I want (NTFS, FAT16/32, HFS, HFS+, EXT2, ETX3, EXT4) with any capacity. I think this app will work with any rooted Xoom (or other devices). Under my Kernel my USB host is located under/usbOTG.
Hope this helps.
Thanks for your post, im having trouble getting my Wifi Xoom usb host to work, i have tried making a cable from the tutorials around here and i have also bought an OTG cable but didn't get any luck having it working, im on HC 3.2 Tiamat 2.1.0 Tachi stock GPU , i tried installing busybox - OTG watcher - Drive Mount etc. and followed all kind of guides in the forum and on google with no luck, i tried usb mice , more than 6 flash drives, usb 3g dongles and other devices without any indication of any kind of connection or powering up, so most probably the problem would be from the cable...as i ordered xoom usb otg cables from ebay and until i receive them i was wondering if there might be anything i was missing?
hunix said:
Thanks for your post, im having trouble getting my Wifi Xoom usb host to work, i have tried making a cable from the tutorials around here and i have also bought an OTG cable but didn't get any luck having it working, im on HC 3.2 Tiamat 2.1.0 Tachi stock GPU , i tried installing busybox - OTG watcher - Drive Mount etc. and followed all kind of guides in the forum and on google with no luck, i tried usb mice , more than 6 flash drives, usb 3g dongles and other devices without any indication of any kind of connection or powering up, so most probably the problem would be from the cable...as i ordered xoom usb otg cables from ebay and until i receive them i was wondering if there might be anything i was missing?
Click to expand...
Click to collapse
Sounds like your cable is not OTG. A lot of them are not. Try it again with your Moto cable when it comes. Also, try rebooting with the cable and drive plugged in, with OTG Watcher running. That has worked for me in the past.
Xoom 3G, stock FW 3.2, non rooted and ot cable
So - just installed USB Mass Storage Watcher OTG - https://market.android.com/details?i...tcherotg&hl=pl
Pendrive is recognized by the program immediately and displays the mount point /dev/block/sda - but unfortunately the next value is 0MB. And this is like that on every pendrive. Do I need root to mount it, or do you have any other idea to mount my pendrive without root?
sdsi said:
Xoom 3G, stock FW 3.2, non rooted and ot cable
So - just installed USB Mass Storage Watcher OTG - https://market.android.com/details?i...tcherotg&hl=pl
Pendrive is recognized by the program immediately and displays the mount point /dev/block/sda - but unfortunately the next value is 0MB. And this is like that on every pendrive. Do I need root to mount it, or do you have any other idea to mount my pendrive without root?
Click to expand...
Click to collapse
You do need root to mount the drive-to use Xoom in USB Host Mode.
Only root? Is that all that needs to be done?
spinstartshere said:
Only root? Is that all that needs to be done?
Click to expand...
Click to collapse
You need a kernel or rom that supports OTG. Tiamat Odachi kernel, Moray rom, the 4G rom, and the Rogue Rana kernel should all support usb host mode. You will also need a real otg cable and probably an app that helps you mount the drive, such as USB Mount All or Drive Mount.
okantomi said:
You need a kernel or rom that supports OTG. Tiamat Odachi kernel, Moray rom, the 4G rom, and the Rogue Rana kernel should all support usb host mode. You will also need a real otg cable and probably an app that helps you mount the drive, such as USB Mount All or Drive Mount.
Click to expand...
Click to collapse
it works great on rooted stock kernel 3.2 with "Drive Mount" but from the market you can not install "Drive Mount" it says not supported.
If the program is free could someone post the apk?
Sent from my Xoom using xda premium
3devious said:
If the program is free could someone post the apk?
Sent from my Xoom using xda premium
Click to expand...
Click to collapse
busybox also needed
it is free and here is it
I have xoom wifi usa version with 4.0 version that is recently released.
my xoom is NOT ROOTED.
with new version of andriod os, am i able to read/write to USB drive Or still need rooted?
thanks in advance.
uhs74 said:
I have xoom wifi usa version with 4.0 version that is recently released.
my xoom is NOT ROOTED.
with new version of andriod os, am i able to read/write to USB drive Or still need rooted?
thanks in advance.
Click to expand...
Click to collapse
Just tried with a genuine motorola OTG cable, which works with the same stick because I used it for upgrading my UK one to US ICS 4.0.3, and it doesn't work without rooting. I still can't root mine yet because my micro SD card for backup hasn't come!
hello
i have wifi xoom android 4.0 rooted with timat kernal
the usb host mount fine but i coudln't found the files in the file explorer
when i mount hard drive fat 32
also when i mounted the ntfs hard drive it shows me 0mb in the usb mount app !
what is the problem
read usb drive from rooted xoom
i have rooted my xoom (wifi usa)based on http://forum.xda-developers.com/showthread.php?t=1446469
I installed stickmount app (https://market.android.com/details?id=eu.chainfire.stickmount&hl=en) from market.
i used Micro USB Male to USB A Female Adapter (http://www.amazon.com/Micro-USB-Mal...YMU6/ref=sr_1_2?ie=UTF8&qid=1329151612&sr=8-2)
once connected to xoom the usb drive ,StickMount app recognize and mount it on specific drive (folder) which display on screen for some duration.
then goto "ES file explorer" or "Astro file explorer" and select that folder and you can see the contents of usb drive.
usb drive should be in format Fat32 mode.I have not tried with NTFS or other format.
Hope this helps somebody.
uhs74 said:
i have rooted my xoom (wifi usa)based on http://forum.xda-developers.com/showthread.php?t=1446469
I installed stickmount app (https://market.android.com/details?id=eu.chainfire.stickmount&hl=en) from market.
i used Micro USB Male to USB A Female Adapter (http://www.amazon.com/Micro-USB-Mal...YMU6/ref=sr_1_2?ie=UTF8&qid=1329151612&sr=8-2)
once connected to xoom the usb drive ,StickMount app recognize and mount it on specific drive (folder) which display on screen for some duration.
then goto "ES file explorer" or "Astro file explorer" and select that folder and you can see the contents of usb drive.
usb drive should be in format Fat32 mode.I have not tried with NTFS or other format.
Hope this helps somebody.
Click to expand...
Click to collapse
You got it to work using that USB adapter? That's not a USB OTG adapter. It really shouldnt work using that one.
derek4484 said:
You got it to work using that USB adapter? That's not a USB OTG adapter. It really shouldnt work using that one.
Click to expand...
Click to collapse
Oh i got it wrong link but i used OTG adapter.
derek4484 said:
You got it to work using that USB adapter? That's not a USB OTG adapter. It really shouldnt work using that one.
Click to expand...
Click to collapse
How's that digger from a USB ORG adapter? Just curious.
Sent from my ADR6350 using Tapatalk
Everything works only if its Fat32. NTFS needs new kernal loaded. I am Rooted but Stock. 4.0.4.
Reboot loop after trying to get external USB to work
My Xoom WiFi running Team EOS build 102 would not see my USB drives. I installed 'USB Mass Storage Watcher' from the market. This app then prompted me to install the OTG version. I followed instruction and removed original version before install the OTG version. The OTG version also prompted me to down load another version of Busy Box, which I did.
I could then see one of my USB (see size and space used), but could not see files or folders in the mount location. I restarted my Xoom (I live in a windows world and reboot fixes a lot of issues LOL), Xoom got stuck in reboot loop. I went into recovery mode and clear my Dalvik, but this had no effect on reboot loop.
Luck for me I had a Nandroid backup from 2 days earlier (pheew). Restored this and back to normal.
Not sure if anyone has had this problem, but I strongly recommended making nandroid backup before doing any device driver updates.
No Prob...
im on the same software version as u, i connected usb drives, mouse and keyboard without any problems, just wanted to let u kno
Hi
I'm trying to enable USB Host on my Nexus 7 but I fail !
I have this cable : SANOXY USB 2.0 A Female To Micro B Male Adapter Cable (Micro USB Host Mode OTG Cable)
http://www.ipmart.com/usa/product/S...B,Host,Mode,OTG,Cable,,352598.php?prod=352598
I need to connect a flash drive formatted to FAT32
I have rooted it
I tried a lot of app from play store ..
Any suggestion ?
BLiTZTN said:
Hi
I'm trying to enable USB Host on my Nexus 7 but I fail !
I have this cable : SANOXY USB 2.0 A Female To Micro B Male Adapter Cable (Micro USB Host Mode OTG Cable)
http://www.ipmart.com/usa/product/S...B,Host,Mode,OTG,Cable,,352598.php?prod=352598
I need to connect a flash drive formatted to FAT32
I have rooted it
I tried a lot of app from play store ..
Any suggestion ?
Click to expand...
Click to collapse
It sounds like all you have left to do is download (root) StickMount from Play store. That's all I had to do. Hope this helps. Enjoy!
I think my cable do not have 4 and 5 pins connected
Try using one of these : http://forum.xda-developers.com/showthread.php?t=1812609&highlight=otg
Hello guys so here is the issue
None of the usb 3.0 device seems to work In otg mode(all usb 3.0 devices are reverse compatible to usb 2.0) i plugged my 500gb hdd with externa power then a 16 gb usb 3.0 pendrive with no success as soon as the device get recognised i see usb safe to remove notification and then no udisk in explorer.
I seriously need a solution as all my usb devices are usb 3.0
Also when the hardware is capablr of usb 3.0 why did gionee crippled it to usb2.0 only?
dhirajranger said:
Hello guys so here is the issue
None of the usb 3.0 device seems to work In otg mode(all usb 3.0 devices are reverse compatible to usb 2.0) i plugged my 500gb hdd with externa power then a 16 gb usb 3.0 pendrive with no success as soon as the device get recognised i see usb safe to remove notification and then no udisk in explorer.
I seriously need a solution as all my usb devices are usb 3.0
Also when the hardware is capablr of usb 3.0 why did gionee crippled it to usb2.0 only?
Click to expand...
Click to collapse
Usb 3.0 port differs from 2.0 see the usb port of note 3 so it might be a problem to include it....since some HDD consume more power they will not work..ive tried with OTG and a trancend usb 3.0 8gb pendrive and it worked flawlessly
GTARaja said:
Usb 3.0 port differs from 2.0 see the usb port of note 3 so it might be a problem to include it....since some HDD consume more power they will not work..ive tried with OTG and a trancend usb 3.0 8gb pendrive and it worked flawlessly
Click to expand...
Click to collapse
yeah i know the port differs but since the soc is same i think we can solder a usb 3.0 with some tweaking. anyways i provided hdd with esternal power with the help of a cable i modified. also did you tried any 16gb pendrive? i think size may have been a problem too?
also pls can you try an external hddso that i woud be certain that this is not a issue with my phone only. thanks in advance
anybody else getting same issue? (notification saying usb safe to remove..)
dhirajranger said:
yeah i know the port differs but since the soc is same i think we can solder a usb 3.0 with some tweaking. anyways i provided hdd with esternal power with the help of a cable i modified. also did you tried any 16gb pendrive? i think size may have been a problem too?
also pls can you try an external hddso that i woud be certain that this is not a issue with my phone only. thanks in advance
anybody else getting same issue? (notification saying usb safe to remove..)
Click to expand...
Click to collapse
All you have to do is install Paragon NTFS & HFS+ on your phone & grant it superuser permission. Now use ES File Explorer to go to the /mount directory & you will find your hard disk partition there.
Sometimes you may get an error while trying to access the files in the secondary partitions. For this issue you will have to manually unmount those partitions in Paragon app and mount them to a location of your choice.
Hope this helps.
Hubriss said:
All you have to do is install Paragon NTFS & HFS+ on your phone & grant it superuser permission. Now use ES File Explorer to go to the /mount directory & you will find your hard disk partition there.
Sometimes you may get an error while trying to access the files in the secondary partitions. For this issue you will have to manually unmount those partitions in Paragon app and mount them to a location of your choice.
Hope this helps.
Click to expand...
Click to collapse
thanks bro it worked like charm.
Hi
Somehow when i connect a 16GB USB stick to my note 3 via an OTG cable it shows
1. USB connector connected
2. USB mass storage connected
then immediately
3. USB mass storage removed safely
so i cannot see anything from my USB device connected via an OTG cable
for instance my 16GB sandisk USB stick is not mounted anymore
it used to work with 4.3.xxx but not with the latest update of 4.4.xxx
also Air Droid can't write anymore so it's useless
my USB stick is ntfs formatted, would that be an issue?
i have Paragon exFAT, NTFS & HFS+ installed but it says it has no root access, i have the stock rom and not rooted. it used to work with 4.3 but now with 4.4 it does not work any more
thank you
pixel mixer said:
Hi
Somehow when i connect a 16GB USB stick to my note 3 via an OTG cable it shows
1. USB connector connected
2. USB mass storage connected
then immediately
3. USB mass storage removed safely
so i cannot see anything from my USB device connected via an OTG cable
for instance my 16GB sandisk USB stick is not mounted anymore
it used to work with 4.3.xxx but not with the latest update of 4.4.xxx
also Air Droid can't write anymore so it's useless
my USB stick is ntfs formatted, would that be an issue?
i have Paragon exFAT, NTFS & HFS+ installed but it says it has no root access, i have the stock rom and not rooted. it used to work with 4.3 but now with 4.4 it does not work any more
thank you
Click to expand...
Click to collapse
NTFS will not work on android. Format your usb to exFat or fat32, or read this
http://blogs.bu.edu/mhirsch/2013/12...r-sharing-usb-flash-thumb-drives-and-usb-hdd/
actually i cannot format my flash, it's full and i don't want to loose the data
thanks anyway
Erhm copy files to PC,format stick and copy back The files?
Respect!
thanks, that would work if i'd had a computer with me. i'm away from home and was hoping i can mount my usb stick. is there a solution that does not require root access?
pixel mixer said:
thanks, that would work if i'd had a computer with me. i'm away from home and was hoping i can mount my usb stick. is there a solution that does not require root access?
Click to expand...
Click to collapse
Not that i know of.
You can try to install the USB Host Diagnostics and check what is happening, on this app the root is optional.
i have no doubt that the USB works but the ntfs file system cannot be mounted directly by the OS so it unmounts it immediately after connection.
so my question still remains, is there a way to mount an ntfs file system without having root access?
thanks
Before I updated to lollipop USB OTG cable was working fine. "USB Connector Connected" show up and then pen drive get mounted and file manager show up.
Now When connecting OTG cable with a usb pen drive, on statusbar "USB Connector Connected" show up. Then nothing comes up.
But when I connect a mouse or/& keyboard it works fine.
I tried the same cable & pen drives on other devices (galaxy S5, Note 2, note 10.1) and it works.
My Device: SM-N9005
Rom right now: audax BOA5
(I updated to leak lollipop first time using ALEXNDR description
With bootloader, modem & Persist partition update).
I have tried different roms, downgraded to kikat & stock roms.
I have tried:
Stock Kernel
Custom kernel
NTFS Mounter
USB OTG Helper
USB sticks of the following configuration
1GB Kingston in FAT32
4GB SanDisk in FAT32
And the problem still the same. No mount and nothing show up in stock file manager or es file explorer.
Any ideas or help are welcome thank you.