Database Users

WiFi suddenly always searching, no ssids, nothing found

Hi,
I intensively searched for my problem, but found always other non-related stuff.
Recently (last 1, 2 days) my WiFi didn't connect to any APs any more. I was using CN nightlies and franco kernel, so today I did update CN without franco. Afterwards I downgraded CN and did a radio update and now I tried the stock 4.2.2 image with the flash-all script, which also seemed to reflash my radio.
The default wifi dialog always displayed the saved wifis only. And after installing stock, the initial wifi dialog displayed "searching" only for a very long time. Sometimes I see some networks and I even managed to connect to mine, but it dropped immediately.
I know, this is very undetailed, but do you have any recommendations / logs to look out / smth which could point me in the right direction? Or is my hardware just broken?
logcat outputs this when turning wi-fi on (on stock 4.2.2, unrooted):
D/WifiService( 499): setWifiEnabled: true pid=1942, uid=1000
D/BluetoothAdapter( 1942): 1110956336: getState() : mService = null. Returning STATE_OFF
W/Netd ( 156): No subsystem found in netlink event
D/NetlinkEvent( 156): Unexpected netlink message. type=0x11
W/Netd ( 156): No subsystem found in netlink event
D/NetlinkEvent( 156): Unexpected netlink message. type=0x11
D/Tethering( 499): sendTetherStateChangedBroadcast 1, 0, 0
D/Tethering( 499): InitialState.processMessage what=4
D/Tethering( 499): sendTetherStateChangedBroadcast 0, 0, 0
D/SoftapController( 156): Softap fwReload - Ok
D/CommandListener( 156): Setting iface cfg
D/CommandListener( 156): Trying to bring down wlan0
E/NetdConnector( 499): NDC Command {219 softap fwreload wlan0 STA} took too long (739ms)
I/wpa_supplicant( 9715): Successfully initialized wpa_supplicant
I/wpa_supplicant( 9715): rfkill: Cannot open RFKILL control device
I/wpa_supplicant( 9715): rfkill: Cannot open RFKILL control device
D/CommandListener( 156): Setting iface cfg
D/CommandListener( 156): Trying to bring up p2p0
D/BluetoothAdapter( 1942): 1110956336: getState() : mService = null. Returning STATE_OFF
Click to expand...
Click to collapse
when flashing stock (via the official google flash scripts), stock firmware files (qualcom, ..) are also flashed, right? or could I do something useful with the official google binaries?

Stupid post.... Ignore

Galaxy S4 Kernel - Sound Brick

Hello, sorry when i post a new Thread i think that many users have the same Problem but my english is not so good that i can find the right Thread ... I have Flash :
I9505_Omega_v2.0_GUEUBMG8_Android_4.3_md5_830353DC5EB14151A017C340C1285E51
Now i have flash a other Rom:
aokp_i9505_unofficial_2013-05-19
and that:
I9505XXUAMDM_I9505OXAAMDM_I9505XXUAMDM_HOME.tar
Now i dont have Sound anymore (micro and Sound are Dissable) Now i have read, that i have make a Bootloader Downgrade and have shoot i up my Bootloader with that :S
What can i doo that Sound works again !? Thanks for Help

wolfsstolz said:
Hello, sorry when i post a new Thread i think that many users have the same Problem but my english is not so good that i can find the right Thread ... I have Flash :
I9505_Omega_v2.0_GUEUBMG8_Android_4.3_md5_830353DC5EB14151A017C340C1285E51
Now i have flash a other Rom:
aokp_i9505_unofficial_2013-05-19
and that:
I9505XXUAMDM_I9505OXAAMDM_I9505XXUAMDM_HOME.tar
Now i dont have Sound anymore (micro and Sound are Dissable) Now i have read, that i have make a Bootloader Downgrade and have shoot i up my Bootloader with that :S
What can i doo that Sound works again !? Thanks for Help
Click to expand...
Click to collapse
wipe data and cache.
if not, reflash your stock firmware, wipe data and cache, reboot

no, that dosnt work, that is a buck in bootloader (4.3 downgrade) i have do flash all roms (wipe too) i have flash a pit rom too but this PRoblem with Bootloader brick is the same. I have Read that many German Users have the same Problem when they flash a higher rom and downgrade it then.I think i must wait for a Developer who have the same Problem :S
When another User Have the same Problem it Please write it here to see that is a big problem for other Users too
Sorry but with Apple i dont have this PRoblem maybe i go back XD

wolfsstolz said:
no, that dosnt work, that is a buck in bootloader (4.3 downgrade) i have do flash all roms (wipe too) i have flash a pit rom too but this PRoblem with Bootloader brick is the same. I have Read that many German Users have the same Problem when they flash a higher rom and downgrade it then.I think i must wait for a Developer who have the same Problem :S
Click to expand...
Click to collapse
why dont you flash MH8 or 5 firmware, it contains the newer bootloader
Edit: please take a look here http://forum.xda-developers.com/showthread.php?t=2436368

when i flash that Sound dont go anymore too. the Problem is a bug in botloader in the newer FW when i have read that correctly

Sorry, i have read that not right .....
Can you give me a link from Rom ?! I only found a rom
forum.xda-developers.com/showthread.php?t=2299087
but this is only without new Bootloader and i think i need that with bootloader or works that too !?
Thansk for Help

Push Thread Too ....
I have Problem with Sound(Downgrade to Stock Rom from Omega Rom)
Now i have Read that i must install fallow Roms:
Factory_Firmware_Full_Wipe_I9505XXUBMGA_I9505OXXBM G3_NEE
and that:
GT-I9505-Factory-Firmware-Full-Wipe-DBT
Basis I9505XXUBMF8_I9505OXABMF8_I9505XXUBMF8
This Roms are in Forum but Theme is Close and Files only on **** hoster (Hotfile)
Who can upload that to another hoster (Hotfile is very slow in Germany 30 kb and 1 gb download go of :S ) like upoaded.to or mega.co.nz ?!
Who can help me for Sound come back please help. I have do all what i have read in Forum but nothing works for me.
Thanks for Help.

No People have a Idea !????
I have make a Photo from logger, it was nice when a dev can look ...
Who can tell me from that Folder:
My Android Folder:
1. i have more "mnt" Folder (mnt + mnt_1)
2. On Storage Folder i can see: USBDriveA ,USBDriveB, USBDrive ..... looks folfer i can see: ExtSdCard - sdcard_3
3. I have a folder named: Firmware + Firmware-mdm
4. ALL Files in : sys/fs/selinux are empty, 0kb , Subfolder too
5. In mnt_1 sys/fs/ext4 Folder are too mutch Folders !? looks on mmcblk0p10 + 16+18+26+29 with same Files
and many more .... Please , who can look on his Machine to this Folders, is that the same !?
Here Are Photos from logger that my Sound dosnt work:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I cant believe that no People can help me to bring back my Sound ....
Here a logcat answer from Sound .....
D/ALSADevice(10225): No valid input device: 0
V/ALSADevice(10225): switchDevice,rxDev:Speaker, txDevnull), curRxDev:None, curTxDev:None
D/alsa_ucm(10225): snd_use_case_set(): uc_mgr 0x40f97fb0 identifier _enadev value Speaker
E/alsa_ucm(10225): Invalid current verb value: Inactive - -1
E/alsa_ucm(10225): No valid device Speaker found
D/ALSADevice(10225): switchDevice: mCurTxUCMDevivce None mCurRxDevDevice Speaker inCallDevSwitch = 0
V/ALSADevice(10225): switchDevice Done
D/alsa_ucm(10225): snd_use_case_set(): uc_mgr 0x40f97fb0 identifier _verb value HiFi
E/alsa_ucm(10225): Control device not initialized
E/alsa_ucm(10225): Control device not initialized
W/alsa_ucm(10225): error snd_use_case_apply_mixer_controls
D/ALSADevice(10225): close: handle 0x40026d40 h 0x0
D/ALSADevice(10225): open: handle 0x40026d40, format 0x2
V/ALSADevice(10225): Music case
D/ALSADevice(10225): Device value returned is hw:0,0
V/ALSADevice(10225): flags 0, devName hw:0,0
E/alsa_pcm(10225): cannot open device '/dev/snd/pcmC0D0p', errno 2
V/ALSADevice(10225): pcm_open returned fd -1
E/ALSADevice(10225): open: Failed to initialize ALSA device 'hw:0,0'
E/AudioHardwareALSA(10225): Device open failed
I/audio_a2dp_hw(10225): adev_open: adev_open in A2dp_hw module
I/AudioFlinger(10225): loadHwModule() Loaded a2dp audio interface from A2DP Audio HW HAL (audio) handle 3
I/AudioFlinger(10225): loadHwModule() Loaded usb audio interface from SEC USB audio HW HAL (audio) handle 4
D/tms_audio_hw/AudioTmsIpc(10225): adev_open : Enter
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsInitSilenceFrames : Enter
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsInitSilenceFrames : Exit
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsServerInit :Enter
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsServerInit: thread started with name =TerminalModeAudioServer and id = 1073900584
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsServerInit exit
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsClientSetup : Enter
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsServerListen :Enter
D/tms_audio_hw/AudioTmsIpc(10225): initMutex: AudioClientSocketMutex Mutex Created
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsClientSetup : Exit
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsClientInit :Enter
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsClientInit: thread started with name =TerminalModeAudioClient and id = 1073900664
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsClientInit exit
D/tms_audio_hw/AudioTmsIpc(10225): adev_open : Exit
D/tms_audio_hw/AudioTmsIpc(10225): adev_init_check : Enter
D/tms_audio_hw/AudioTmsIpc(10225): adev_set_master_volume : Enter 1.000000
I/AudioFlinger(10225): loadHwModule() Loaded tms audio interface from TMS Audio HW HAL (audio) handle 5
E/AudioPolicyManagerBase(10225): Not output found for attached devices 00000003
E/AudioPolicyManagerBase(10225): Failed to open primary output
E/AudioPolicyManagerBase(10225): getDeviceForStrategy() speaker device not found
E/AudioPolicyManagerBase(10225): getDeviceForStrategy() speaker device not found
E/AudioPolicyManagerBase(10225): getDeviceForStrategy() speaker device not found
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsServerListen Socket Success Name /data/TMAudioSocketServer
E/AudioPolicyService(10225): couldn't init_check the audio policy (No such device)
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsServerListen Bind Success gAudioServerLocalSockFd 20
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsServerListen Listen Done gAudioServerLocalSockFd 20 ret 0
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsServerListen PLATFORM_AUDIO_CMD SIZE 16
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsServerListen PLATFORM_AUDIO_DATA SIZE 24
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsServerListen PLATFORM_AUDIO_META_DATA SIZE 20
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsServerListen SizeInBytes 12288
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsServerListen : Givimg Permission 0777 mode , 0 ret
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsServerListen accept Start len 110 gAudioServerLocalSockFd 20
V/TranscoderService(10225): TranscoderService created
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsClientListen :Enter
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsClientListen Socket Success Name /data/TMAudioSocketClient
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsClientListen Bind Success gAudioClientLocalSockFd 23
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsClientListen Listen Done gAudioClientLocalSockFd 23 ret 0
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsClientListen PLATFORM_AUDIO_CMD SIZE 16
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsClientListen PLATFORM_AUDIO_DATA SIZE 24
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsClientListen PLATFORM_AUDIO_META_DATA SIZE 20
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsClientListen accept Start len 110 gAudioClientLocalSockFd 23
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsServerListen : Givimg Permission 0777 mode , 0 ret
I/power ( 5291): *** release_dvfs_lock : lockType : 1
D/CustomFrequencyManagerService( 5291): releaseDVFSLockLocked : Getting Lock type frm List : DVFS_MIN_LIMIT frequency : 1566000 uid : 10135 pid : 8603 tag : [email protected]

flash this firmware, wipe data and cache after, reboot http://www.hotfile.com/dl/243289856/5f90db9/I9505XXUDMH8_I9505OXXDMHA_BTU.zip.html

Flash stock kernel again and you would be good.
I had this issue too and found it hard way that it's custom kernel causing this issue.
You can also try this.
Switch off your phone (not restart) and wait for 15-20 secs. And turn it back on. Some users are saying, this will get back your sound.

I have flash that many Times but i will test that again .... Thanks for Help.
Is that the same Rom ? :
I9505XXUDMH8_I9505OXXDMHA_I9505XXUDMH8_HOME.tar.md5

ok, i have Flash now the Rom again, have 3 Times make a Factory Reset + Cache Wipe
Then i have Flash the Kernel only and power of for 20 Seconds my Galaxy then i have Reboot that but no Sound again
Then i have make a LogCat and the Same here: (No Speaker found)
D/ALSADevice( 6355): No valid input device: 0
V/ALSADevice( 6355): switchDevice,rxDev:Speaker, txDevnull), curRxDev:None, curTxDev:None
D/alsa_ucm( 6355): snd_use_case_set(): uc_mgr 0x407ba2f8 identifier _enadev value Speaker
E/alsa_ucm( 6355): Invalid current verb value: Inactive - -1
E/alsa_ucm( 6355): No valid device Speaker found
D/ALSADevice( 6355): switchDevice: mCurTxUCMDevivce None mCurRxDevDevice Speaker inCallDevSwitch = 0
V/ALSADevice( 6355): switchDevice Done
D/alsa_ucm( 6355): snd_use_case_set(): uc_mgr 0x407ba2f8 identifier _verb value HiFi
E/alsa_ucm( 6355): Control device not initialized
E/alsa_ucm( 6355): Control device not initialized
W/alsa_ucm( 6355): error snd_use_case_apply_mixer_controls
D/ALSADevice( 6355): close: handle 0x43d4ad40 h 0x0
D/ALSADevice( 6355): open: handle 0x43d4ad40, format 0x2
V/ALSADevice( 6355): Music case
D/ALSADevice( 6355): Device value returned is hw:0,0
V/ALSADevice( 6355): flags 0, devName hw:0,0
E/alsa_pcm( 6355): cannot open device '/dev/snd/pcmC0D0p', errno 2
V/ALSADevice( 6355): pcm_open returned fd -1
E/ALSADevice( 6355): open: Failed to initialize ALSA device 'hw:0,0'
E/AudioHardwareALSA( 6355): Device open failed
I/audio_a2dp_hw( 6355): adev_open: adev_open in A2dp_hw module
I/AudioFlinger( 6355): loadHwModule() Loaded a2dp audio interface from A2DP Audio HW HAL (audio) handle 3
I/AudioFlinger( 6355): loadHwModule() Loaded usb audio interface from SEC USB audio HW HAL (audio) handle 4
D/tms_audio_hw/AudioTmsIpc( 6355): adev_open : Enter
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsInitSilenceFrames : Enter
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsInitSilenceFrames : Exit
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsServerInit :Enter
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsServerInit: thread started with name =TerminalModeAudioServer and id = 1138011176
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsServerInit exit
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsServerListen :Enter
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsClientSetup : Enter
D/tms_audio_hw/AudioTmsIpc( 6355): initMutex: AudioClientSocketMutex Mutex Created
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsClientSetup : Exit
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsClientInit :Enter
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsClientInit: thread started with name =TerminalModeAudioClient and id = 1138011256
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsClientInit exit
D/tms_audio_hw/AudioTmsIpc( 6355): adev_open : Exit
D/tms_audio_hw/AudioTmsIpc( 6355): adev_init_check : Enter
D/tms_audio_hw/AudioTmsIpc( 6355): adev_set_master_volume : Enter 1.000000
I/AudioFlinger( 6355): loadHwModule() Loaded tms audio interface from TMS Audio HW HAL (audio) handle 5
E/AudioPolicyManagerBase( 6355): Not output found for attached devices 00000003
E/AudioPolicyManagerBase( 6355): Failed to open primary output
E/AudioPolicyManagerBase( 6355): getDeviceForStrategy() speaker device not found
E/AudioPolicyManagerBase( 6355): getDeviceForStrategy() speaker device not found
E/AudioPolicyManagerBase( 6355): getDeviceForStrategy() speaker device not found
E/AudioPolicyService( 6355): couldn't init_check the audio policy (No such device)
V/TranscoderService( 6355): TranscoderService created
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsClientListen :Enter
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsClientListen Socket Success Name /data/TMAudioSocketClient
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsClientListen Bind Success gAudioClientLocalSockFd 21
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsClientListen Listen Done gAudioClientLocalSockFd 21 ret 0
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsServerListen Socket Success Name /data/TMAudioSocketServer
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsServerListen Bind Success gAudioServerLocalSockFd 22
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsClientListen PLATFORM_AUDIO_CMD SIZE 16
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsServerListen Listen Done gAudioServerLocalSockFd 22 ret 0
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsServerListen PLATFORM_AUDIO_CMD SIZE 16
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsServerListen PLATFORM_AUDIO_DATA SIZE 24
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsServerListen PLATFORM_AUDIO_META_DATA SIZE 20
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsServerListen SizeInBytes 12288
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsServerListen : Givimg Permission 0777 mode , 0 ret
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsServerListen accept Start len 110 gAudioServerLocalSockFd 22
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsClientListen PLATFORM_AUDIO_DATA SIZE 24
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsClientListen PLATFORM_AUDIO_META_DATA SIZE 20
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsClientListen accept Start len 110 gAudioClientLocalSockFd 21
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsServerListen : Givimg Permission 0777 mode , 0 ret
W/ActivityManager( 764): Launch timeout has expired, giving up wake lock!

it maybe a hardware issue.
dial *#7353# and make test

I have a Pit Rom here
Factory_Firmware_Full_Wipe_I9505XXUBMGA_I9505OXXBMG3_NEE
and:
GT-I9505-Factory-Firmware-Full-Wipe-DBT I9505OXABMF8
But when i load that in Odin , i will become a error , invalid .....
Same is with that Rom (one File Rom)
I9505XXUBMEA_I9505OXABMEA_I9505XXUBMEA_HOME.tar.md5 is invalid
I can only flash 1 File Roms
<OSM> MD5 hash value is invalid
<OSM> PDA_I9505XXUBMF8_I9505OXABMF8_I9505XXUBMF8.tar.md5 is invalid.
<OSM> End...
no sound here too , here are log Files:
E/Encryption( 187): created DirEncryptionManager
D/Vold ( 187): Volume sdcard state changing -1 (Initializing) -> 0 (No-Media)
D/Encryption( 187): enable android secure container 'sdcard'
D/Vold ( 187): Volume sda state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 187): Volume sdb state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 187): Volume sdc state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 187): Volume sdd state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 187): Volume sde state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 187): Volume sdf state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 187): '/dev/block/mmcblk0' : disk_size (15758000128)
D/DirectVolume( 187): DirectVolume::readId -> path '/sys/devices/platform/msm_sdcc.2/mmc_host/mmc2/mmc2:e624/block/mmcblk1/device/cid'
D/DirectVolume( 187): DirectVolume::readId -> id '035344535530384780303189d800cab0'
D/DirectVolume( 187): DirectVolume::handleDiskAdded -> mDiskMajor 179, mDiskMinor 32, NPARTS:1
D/Vold ( 187): Volume sdcard state changing 0 (No-Media) -> 2 (Pending)
W/PackageManager( 766): Unknown permission com.sec.android.permission.VIDEOHUB in package com.sec.android.app.videoplayer
W/PackageManager( 766): Unknown permission android.permission.SYSTEM_ALERT in package com.sec.android.app.videoplayer
I have upload the LogFile, when you have time for that, you can look on that. Thanks
http://ul.to/k34sopfp

wolfsstolz said:
I have a Pit Rom here
Factory_Firmware_Full_Wipe_I9505XXUBMGA_I9505OXXBMG3_NEE
and:
GT-I9505-Factory-Firmware-Full-Wipe-DBT I9505OXABMF8
But when i load that in Odin , i will become a error , invalid .....
Same is with that Rom (one File Rom)
I9505XXUBMEA_I9505OXABMEA_I9505XXUBMEA_HOME.tar.md5 is invalid
I can only flash 1 File Roms
<OSM> MD5 hash value is invalid
<OSM> PDA_I9505XXUBMF8_I9505OXABMF8_I9505XXUBMF8.tar.md5 is invalid.
<OSM> End...
no sound here too , here are log Files:
E/Encryption( 187): created DirEncryptionManager
D/Vold ( 187): Volume sdcard state changing -1 (Initializing) -> 0 (No-Media)
D/Encryption( 187): enable android secure container 'sdcard'
D/Vold ( 187): Volume sda state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 187): Volume sdb state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 187): Volume sdc state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 187): Volume sdd state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 187): Volume sde state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 187): Volume sdf state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 187): '/dev/block/mmcblk0' : disk_size (15758000128)
D/DirectVolume( 187): DirectVolume::readId -> path '/sys/devices/platform/msm_sdcc.2/mmc_host/mmc2/mmc2:e624/block/mmcblk1/device/cid'
D/DirectVolume( 187): DirectVolume::readId -> id '035344535530384780303189d800cab0'
D/DirectVolume( 187): DirectVolume::handleDiskAdded -> mDiskMajor 179, mDiskMinor 32, NPARTS:1
D/Vold ( 187): Volume sdcard state changing 0 (No-Media) -> 2 (Pending)
W/PackageManager( 766): Unknown permission com.sec.android.permission.VIDEOHUB in package com.sec.android.app.videoplayer
W/PackageManager( 766): Unknown permission android.permission.SYSTEM_ALERT in package com.sec.android.app.videoplayer
I have upload the LogFile, when you have time for that, you can look on that. Thanks
http://ul.to/k34sopfp
Click to expand...
Click to collapse
sound wont work with older firmware even with the pit. you have to flash official updated firmware hard reset your device.also make sure its your phones official firmware.if that don't work try kies emergency firmware upgrade. hope this helps.

[Q] NFC problems in CM12-based mods with klte/g900f

Hi,
the mod threads for the various cm12 builds claim that NFC is working, and there are also several user replies with reports that it works fine. Yet it doesn't work correctly for me, and at least some others: The device reports that NFC is working, I can activate and deactivate it, but accessing cards only works partially or not at all. The funny thing is that after flashing cm12, restoring an old cm11 nandroid backup does not restore NFC functionality. It doesn't matter if I do a clean install/full wipe. With Lollipop TW roms (I've tried XtreStoLite), NFC works fine.
I'll try to keep this top post up to date. Last update: 2015/03/15
We've found the issue that caused the major part of the problems. A configuration file must be adapted to the latest firmware. (update.zip version) This fix has been accepted upstream and is included in nightlies starting from 20150316.
There are cards/tags that still don't work, but do with stock, though. I've tested:
German eID (works)
Mifare Ultralight (works)
Beam (works)
EMV (works)
Mifare Classic (e.g. German "Mensacard", membership card from gym / McFit, ..) does not work. See below for debug output of libncf-nci.

Hi there,
I have exactly the same problem. NFC doesn't work for me neither. My device is a G900F from Germany, bought via Amazon using Euphoria OS which is based on CM12.
Ah, and just to get that straight, european G900F is klte without any other letters, right?

This post is obsolete: The problem is very likely not kernel-driver related.
I investigated a bit if the Kernel could be the problem. For this, I took the amplitude_rw kernel (based on Samsung's, but available from github) and Ktoonsez's version of the CM12 kernel . Both use the same version of the pn547 driver. The nfc-nci driver differs, but it doesn't make any difference if I copy the files over from the Samsung-based version and recompile. (The driver is disabled in the CM kernel by default anyway, I tried to enable it, of course. If I additionaly copy the related .so files from the Samsung rom that doesn't change anything either.) Continuing to investigate the differences, I noticed that the other difference is that the CM kernel has a hack that prevents the bcm2079x from being loaded on non-900P/I variants. I removed that line and noticed that the probe function of the driver did not complain that the device was missing, though from the looks of the code it would if it wasn't there. With that in mind, I tried to copy the bcm2079x firmware, configuration and .so files from a CM12 sprint build, but that didn't resolve the problem either.
More info: I've also compiled Ktoonsez's kernel with NFC_DEBUG set, and enabled the dynamic debug output for the driver. Doesn't look helpful to me, but for the sake of completeness:
Code:
<7>[ 967.651230] pn547_dev_open : 10,60
<6>[ 967.662071] pn547_dev_ioctl power on, irq=1
<6>[ 967.762268] pn547_dev_ioctl power off, irq=0
<6>[ 967.884563] pn547_dev_ioctl power on, irq=1
<6>[ 967.887970] pn547 : + w
<7>[ 967.888021] pn547_dev_write : writing 4 bytes.
<6>[ 967.889048] pn547 : - w
<7>[ 967.889159] pn547_dev_read : reading 3 bytes. irq=0
<6>[ 967.889218] pn547 : + r
<6>[ 967.889264] pn547: wait_event_interruptible : in
<6>[ 967.918905] pn547 : call
<6>[ 967.919127] pn547 : h
<6>[ 967.919655] pn547: i2c_master_recv
<7>[ 967.919741] pn547_dev_read : reading 3 bytes. irq=1
<6>[ 967.919793] pn547 : + r
<6>[ 967.920168] pn547: i2c_master_recv
<6>[ 967.921893] pn547 : + w
<7>[ 967.921938] pn547_dev_write : writing 3 bytes.
<6>[ 967.922314] pn547 : - w
<6>[ 967.922474] pn547 : call
<7>[ 967.922664] pn547_dev_read : reading 3 bytes. irq=1
<6>[ 967.922709] pn547 : + r
<6>[ 967.923138] pn547: i2c_master_recv
.. etc ..
<6>[ 998.860380] pn547: i2c_master_recv
<6>[ 998.873274] pn547_dev_ioctl power off, irq=0
During the log, I've had an NFC test application open and an NFC tag close to the device.
Last, I tried to check what's the problem with copying Samsung's files. If I use their NfcNci.adb, logcat throws
Code:
E/AndroidRuntime( 2655): FATAL EXCEPTION: main
E/AndroidRuntime( 2655): Process: com.android.nfc, PID: 2655
E/AndroidRuntime( 2655): java.lang.NoSuchMethodError: No static method isProductShip()I in class Landroid/os/Debug; or its super classes (declaration of 'android.os.Debug' appears in /system/framework/framework.jar)
E/AndroidRuntime( 2655): at com.android.nfc.NfcService.<clinit>(NfcService.java:164)
E/AndroidRuntime( 2655): at com.android.nfc.NfcApplication.onCreate(NfcApplication.java:61)
E/AndroidRuntime( 2655): at android.app.Instrumentation.callApplicationOnCreate(Instrumentation.java:1011)
E/AndroidRuntime( 2655): at android.app.ActivityThread.handleBindApplication(ActivityThread.java:4553)
E/AndroidRuntime( 2655): at android.app.ActivityThread.access$1600(ActivityThread.java:147)
E/AndroidRuntime( 2655): at android.app.ActivityThread$H.handleMessage(ActivityThread.java:1357)
E/AndroidRuntime( 2655): at android.os.Handler.dispatchMessage(Handler.java:102)
E/AndroidRuntime( 2655): at android.os.Looper.loop(Looper.java:135)
E/AndroidRuntime( 2655): at android.app.ActivityThread.main(ActivityThread.java:5256)
E/AndroidRuntime( 2655): at java.lang.reflect.Method.invoke(Native Method)
E/AndroidRuntime( 2655): at java.lang.reflect.Method.invoke(Method.java:372)
E/AndroidRuntime( 2655): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:898)
E/AndroidRuntime( 2655): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:693)

After doing some more digging, I discovered that running
Code:
setprop nfc.nxp_log_level_global 3
as root enables tons of debug messages.
Maybe it's the firmware
Obsolete: This is unlikely. Its only Mifare cards that don't work, and the protocols are, as far as I can see, implemented in the userland library.
I noticed that after enabling NFC, one of the logcat outputs is
Code:
D/NxpHal ( 1081): FW version for FW file = 0x118
D/NxpHal ( 1081): FW version from device = 0x8011f
D/NxpHal ( 1081): FW image older than device's, skip update
Maybe this helps. (Could anyone with working NFC check which FW their device has? Should work the same way: Run setprop.. as root, enable NFC, search logcat output for the FW info, then reset the log level to 0.)
Mifare cards
I further noticed that holding a Mifare card near the antenna does trigger a reaction:
Code:
D/NxpTml ( 2317): PN547 - I2C Read successful.....
D/NxpNciR ( 2317): len = 23 > 61051401808000FF010904000454566739010800000000
D/NxpTml ( 2317): PN547 - Posting read message.....
D/NxpHal ( 2317): read successful status = 0x0
D/NxpHal ( 2317): NxpNci: RF Interface = MIFARE
D/NxpHal ( 2317): NxpNci: Protocol = MIFARE
D/NxpHal ( 2317): NxpNci: Mode = A Passive Poll
D/NxpExtns( 2317): const CNfcParam* CNfcConfig::find(const char*) const found MIFARE_READER_ENABLE=(0x1)
D/NxpTml ( 2317): PN547 - Write requested.....
D/NxpTml ( 2317): PN547 - Invoking I2C Write.....
D/NxpTml ( 2317): PN547 - Read requested.....
D/NxpTml ( 2317): PN547 - Invoking I2C Read.....
D/NxpNciX ( 2317): len = 7 > 20020401800100
D/NxpTml ( 2317): PN547 - I2C Write successful.....
D/NxpTml ( 2317): PN547 - Posting Fresh Write message.....
D/NxpTml ( 2317): PN547 - Tml Writer Thread Running................
D/NxpHal ( 2317): write successful status = 0x0
D/NxpTml ( 2317): PN547 - I2C Read successful.....
D/NxpNciR ( 2317): len = 4 > 40020106
D/NxpTml ( 2317): PN547 - Posting read message.....
D/NxpHal ( 2317): read successful status = 0x0
D/NxpHal ( 2317): > Deinit workaround for LLCP set_config 0x0 0x0 0xa
D/NxpHal ( 2317): phNxpNciHal_print_res_status: response status =STATUS_OK
D/NxpTml ( 2317): PN547 - Read requested.....
D/NxpTml ( 2317): PN547 - Invoking I2C Read.....
But nothing ever shows up in an NFC test app and I have to deactivate and reactivate NFC at this point to scan any of the working smartcards. So likely something in the mifare reader code does not work.

No NFC for me either

Running yesterday's nightly 20150310 on klte, no NFC either.

Any news? I have a SM-G900F and am unable to read NFC tags since updating to CM12 (now using 20150313).

My NFC was gone too after I updated to the latest nightly yesterday. It appears that copying the firmware file and configuration from XtreStoLite fixed that, and that I'm back to the situation I described in the top post again now. I'll attach both files (in one archive). They should be placed in the according directories in the /system partition, i.e.
etc/libnfc-nxp.conf -> /system/etc/libnfc-nxp.conf
system/vendor/firmware/libpn547_fw.so -> system/vendor/firmware/libpn547_fw.so
Could you test if copying them & rebooting (partially) restores NFC for you, too? (This should be possible with a file manager like X-Plore) If you don't want to use my archive, download XtreStoLite and extract the same files from their zip. Flashing CM should restore the original files in any case.

FirebirdDE said:
My NFC was gone too after I updated to the latest nightly yesterday. It appears that copying the firmware file and configuration from XtreStoLite fixed that, and that I'm back to the situation I described in the top post again now. I'll attach both files (in one archive). They should be placed in the according directories in the /system partition, i.e.
etc/libnfc-nxp.conf -> /system/etc/libnfc-nxp.conf
system/vendor/firmware/libpn547_fw.so -> system/vendor/firmware/libpn547_fw.so
Could you test if copying them & rebooting (partially) restores NFC for you, too? (This should be possible with a file manager like X-Plore) If you don't want to use my archive, download XtreStoLite and extract the same files from their zip. Flashing CM should restore the original files in any case.
Click to expand...
Click to collapse
Hey, that actually worked! I tried with an NFC reader app, and my nfc tag popped up right away.

So now we're missing only flashable zip
I will try this one and if it will work, I will try my scripting luck
And here it is, enjoy

I believe that it might suffice to update the configuration file. According to the logs, at least on my phone, the firmware file isn't used anyway.

FirebirdDE said:
My NFC was gone too after I updated to the latest nightly yesterday. It appears that copying the firmware file and configuration from XtreStoLite fixed that, and that I'm back to the situation I described in the top post again now. I'll attach both files (in one archive). They should be placed in the according directories in the /system partition, i.e.
etc/libnfc-nxp.conf -> /system/etc/libnfc-nxp.conf
system/vendor/firmware/libpn547_fw.so -> system/vendor/firmware/libpn547_fw.so
Could you test if copying them & rebooting (partially) restores NFC for you, too? (This should be possible with a file manager like X-Plore) If you don't want to use my archive, download XtreStoLite and extract the same files from their zip. Flashing CM should restore the original files in any case.
Click to expand...
Click to collapse
WOHOOOO! Thank you very much. My klte's NFC stopped working after flashing some alpha CM12. Some days ago I flashed cm-12-20150310-NIGHTLY-klte and the NFC problem remained. Now I replaced /etc/libnfc-nxp.conf with the config file you attached and NFC is working again.

Great! I've submitted this upstream, hopefully they'll accept this. It would be good to get feedback from someone who didn't experience any NFC issues in the first place, though, to make sure that this does not break NFC for anyone.

How awesome. NFC is really stable too and I think we have found the fix. I belive that many galaxy s5 CM12 users will be happy

Seems like the fix will be in the next nightly, too.

Still some Problems
Hello,
first at all thanks for your research!
I installed your fix for the NFC (tried both zip and "self" copy) but NFC is not working correct:
* sometimes when enable/disable NFC i get a sound (not allways)
* When i scan a tag (the first time after enabling nfc) i get a sound for scanning, but NFC TagInfo and Tagstand Writer did not recognize the tag.
* Sometimes NFC TagInfo by NXP is working but one one time... (hard to explain, often the scanning works when i open the settings?)
* The Scanning works only once till i deaktivate/active NFC
I used the the fix with cyanogenmod nightly 14-03-2015 and now with the Unofficial build [ROM] CyanogenMod 12.0 | Android 5.0 Lollipop | [03/13/2015]
Also installed the latest Xposed framwork and SELinux "Permissive" ...
Any ideas?
Thanks in advance

Which variant do you have? (I, and afaik all others that reported here, have a g900f)
What kind of NFC tag do you try to scan? (As I've already written in the top post, Mifare Classic does not work.)
The relevant logcat (see a few posts up, I've posted a setprop-command that enables debug output) would also be interesting.
Btw., the only sound I get is for the recognition of a NFC chip and its removal. Enabling/disabling makes no sound whatsoever.

FirebirdDE said:
Which variant do you have? (I, and afaik all others that reported here, have a g900f)
What kind of NFC tag do you try to scan? (As I've already written in the top post, Mifare Classic does not work.)
The relevant logcat (see a few posts up, I've posted a setprop-command that enables debug output) would also be interesting.
Btw., the only sound I get is for the recognition of a NFC chip and its removal. Enabling/disabling makes no sound whatsoever.
Click to expand...
Click to collapse
What i forgot i have G900F
Sometimes i really got sound for enable/disable!?!
Hard to tell you what type of NFC tag i use, bacuse i cannot read them at all.
I tried
* a writable tag from androidbands.com
* a company card
* a skiing card
I will try to logcat later this day....

FirebirdDE said:
Which variant do you have? (I, and afaik all others that reported here, have a g900f)
What kind of NFC tag do you try to scan? (As I've already written in the top post, Mifare Classic does not work.)
The relevant logcat (see a few posts up, I've posted a setprop-command that enables debug output) would also be interesting.
Btw., the only sound I get is for the recognition of a NFC chip and its removal. Enabling/disabling makes no sound whatsoever.
Click to expand...
Click to collapse
Here is a loccat (created with logcat extrem app - currently no adb available for me)
Actions:
Activate NFC // Scann androidbrands.com Tag // Deactivate NFC
Looks like problems with the "libpn547_fw":
Code:
Line 191: D/NxpFwDnld( 447): @@@/system/vendor/firmware/libpn547_fw.so
Line 193: E/NxpFwDnld( 447): NULL handler : unable to load the library file, specify correct path
Line 199: E/NxpFwDnld( 447): Image extraction Failed - invalid imginfo or imginfolen!!
Line 201: E/NxpFwDnld( 447): Error loading libpn547_fw !!
Line 209: E/NxpHal ( 447): Wrong FW Version >>> Firmware download not allowed
The file exists in "/system/vendor/firmware/libpn547_fw.so" with "rw-rw----"

ostauss said:
Here is a loccat (created with logcat extrem app - currently no adb available for me)
Actions:
Activate NFC // Scann androidbrands.com Tag // Deactivate NFC
Looks like problems with the "libpn547_fw":
Code:
Line 191: D/NxpFwDnld( 447): @@@/system/vendor/firmware/libpn547_fw.so
Line 193: E/NxpFwDnld( 447): NULL handler : unable to load the library file, specify correct path
Line 199: E/NxpFwDnld( 447): Image extraction Failed - invalid imginfo or imginfolen!!
Line 201: E/NxpFwDnld( 447): Error loading libpn547_fw !!
Line 209: E/NxpHal ( 447): Wrong FW Version >>> Firmware download not allowed
The file exists in "/system/vendor/firmware/libpn547_fw.so" with "rw-rw----"
Click to expand...
Click to collapse
changed permissions to "rw-rw-r--" looks like lib is correctly loaded, but scanned androidbands.com Tag still not recognized by TagInfo...

Phone app continuously crashing

First, some information about the device:
1. Samsung Galaxy S5 from TMobile
2. Has Lollipop installed (from OTA update)
3. Factory ROM, not rooted, bootloader still locked, no modifications whatsoever.
For some reason I am getting the "Unfortunately, Phone has stopped" popup continuously. This occurs from the moment I boot up (at lockscreen) and as soon as I press "OK", it comes up about 0.2 seconds later. Makes it very difficult to navigate the device menus.
I have looked at logcats and this exception is what occurs:
Code:
I/Telecom (10435): Call: CallerInfo received for ****: [email protected] { name null, phoneNumber non-null }
I/Telecom (10435): MissedCallNotifier: showMissedCallNotification
D/ScoverManager(10435): serviceVersion : 16908288
D/EcidContact(10435): ECID AOSP VERSION: 2.3.6
D/AndroidRuntime(10435): Shutting down VM
E/AndroidRuntime(10435): FATAL EXCEPTION: main
E/AndroidRuntime(10435): Process: com.android.server.telecom, PID: 10435
E/AndroidRuntime(10435): java.lang.NullPointerException: Attempt to invoke virtual method 'boolean java.lang.String.equals(java.lang.Object)' on a null object reference
E/AndroidRuntime(10435): at com.android.server.telecom.secutils.TelecomUtils.getPresentationString(TelecomUtils.java:2917)
E/AndroidRuntime(10435): at com.android.server.telecom.MissedCallNotifier.showMissedCallNotification(MissedCallNotifier.java:191)
E/AndroidRuntime(10435): at com.android.server.telecom.MissedCallNotifier$3$1.onCallerInfoChanged(MissedCallNotifier.java:617)
E/AndroidRuntime(10435): at com.android.server.telecom.Call.access$000(Call.java:74)
E/AndroidRuntime(10435): at com.android.server.telecom.Call$1.onQueryComplete(Call.java:165)
E/AndroidRuntime(10435): at com.android.internal.telephony.CallerInfoAsyncQuery$CallerInfoAsyncQueryHandler.onQueryComplete(CallerInfoAsyncQuery.java:343)
E/AndroidRuntime(10435): at android.content.AsyncQueryHandler.handleMessage(AsyncQueryHandler.java:344)
E/AndroidRuntime(10435): at android.os.Handler.dispatchMessage(Handler.java:102)
E/AndroidRuntime(10435): at android.os.Looper.loop(Looper.java:145)
E/AndroidRuntime(10435): at android.app.ActivityThread.main(ActivityThread.java:5837)
E/AndroidRuntime(10435): at java.lang.reflect.Method.invoke(Native Method)
E/AndroidRuntime(10435): at java.lang.reflect.Method.invoke(Method.java:372)
E/AndroidRuntime(10435): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:1388)
E/AndroidRuntime(10435): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:1183)
V/ApplicationPolicy( 783): isApplicationStateBlocked userId 0 pkgname com.android.server.telecom
W/ActivityManager( 783): Process com.android.server.telecom has crashed too many times: killing!
I/dumpstate(10454): begin
D/StatusBarManagerService( 783): manageDisableList userId=0 what=0x0 pkg=WindowManager.LayoutParams
D/CrashAnrDetector( 783): processName: com.android.server.telecom
D/CrashAnrDetector( 783): broadcastEvent : com.android.server.telecom system_app_crash
W/ContextImpl( 783): Calling a method in the system process without a qualified user: android.app.ContextImpl.sendBroadcast:1701 com.android.server.analytics.data.collection.application.CrashAnrDetector.broadcastEvent:296 com.android.server.analytics.data.collection.application.CrashAnrDetector.processDropBoxEntry:254 com.android.server.analytics.data.collection.application.CrashAnrDetector.access$100:60 com.android.server.analytics.data.collection.application.CrashAnrDetector$1.onReceive:102
I/SurfaceFlinger( 245): id=21 createSurf (49x49),1 flag=4, Application Error: com.android.server.telecom
I/OpenGLRenderer( 783): Initialized EGL, version 1.4
I/OpenGLRenderer( 783): HWUI protection enabled for context , &this =0x9de366f0 ,&mEglDisplay = 1 , &mEglConfig = 8
E/android.os.Debug( 783): [email protected] > sdumpstate -k -t -z -d -o /data/log/dumpstate_app_error
I/ServiceManager( 345): Waiting for service AtCmdFwd...
D/PowerManagerService( 783): [input device light] handleInputDeviceLightOff
It seems to have something to do with telecom. I have removed the SIM card, SD card, etc. No difference. I have tried clearing app data for contacts, contacts storage, phone app, even "com.android.server.telecom" from ADB SHELL PM CLEAR command, but no change.
Does anyone know what the issue could be? What can I try to do (besides factory reset of course) to fix the issue? Thanks in advance. I can post more logcats if needed.

There are numerous bugs with system apps crashing with lolipop on the S5. My contacts app is constantly crashing, vzw, OTA.

Ended up doing a factory reset, which fixed the issue

I really didn't want to factory reset ?

You need to factory reset after upgrading from KK to LP

That's more of a personal preference. I've seen tons of upgrades on this phone that went fine.

Android.Addiction said:
Ended up doing a factory reset, which fixed the issue
Click to expand...
Click to collapse
Android.Addiction said:
That's more of a personal preference. I've seen tons of upgrades on this phone that went fine.
Click to expand...
Click to collapse
___________________

Redmi 3s prime random restart

I am having issue of random restart of my redmi 3s prime.so far searched many blog it has been reported as a hardware fault & to solve is to replace main board. The restart is also random & i am not able to reproduce it at my own will however i have noticed few things
Phone doesn't restart while it is IDLE[/B]
Phone doesn't restart while it charging
so am thinking changing the battery might solve the issue as i have been using the phone since 3 years & phone was working fine in initial years. I am also attaching the full bug report. Kindly help
BUG REPORT
can't find the pid
Failed to find: /data/misc/anrd/
Skipping systrace because '/sys/kernel/debug/tracing/tracing_on' content is '0'
/data/misc/raft does not exist or is not a directory
Adding dir /cache/recovery (recursive: 1)
Duration of '/cache/recovery': 0.010s
Adding dir /data/misc/recovery (recursive: 1)
Duration of '/data/misc/recovery': 0.002s
Adding dir /data/misc/logd (recursive: 0)
Duration of '/data/misc/logd': 0.001s
Adding dir /data/misc/profiles/cur (recursive: 1)
Duration of '/data/misc/profiles/cur': 0.117s
Adding dir /data/misc/profiles/ref (recursive: 1)
Duration of '/data/misc/profiles/ref': 0.015s
MOUNT INFO: 50 entries added to zip file
Duration of 'MOUNT INFO': 0.098s
/sys/block/zram0: Permission denied
Skipping 'lsmod' because /proc/modules does not exist
Adding dir /data/misc/bluetooth/logs (recursive: 1)
Duration of '/data/misc/bluetooth/logs': 0.000s
taking late screenshot
drop_root_user(): already running as Shell
Screenshot saved on /data/user_de/0/com.android.shell/files/bugreports/bugreport-lineage_land-OPM7.181205.001-2019-03-23-14-43-03.png
logcat read failure
*** command 'logcat -L -b all -v threadtime -v printable -v uid -d *:v' failed: exit code 1
AddAnrTraceDir(): dump_traces_file=/data/anr/dumptrace_MF3dpz, anr_traces_dir=/data/anr
Dumping current ANR traces (/data/anr/dumptrace_MF3dpz) to the main bugreport entry
Error unlinking temporary trace path /data/anr/dumptrace_MF3dpz: Permission denied
execvp on command 'parse_radio_log /proc/last_radio_log' failed (error: Permission denied)
*** command 'parse_radio_log /proc/last_radio_log' failed: exit code 1
No IDumpstateDevice implementation
Error dumping service info: (Unknown error -2147483646) android.hardware.fingerprint.IFingerprintCustomDaemon
Can't find service: android.service.gatekeeper.IGateKeeperService
Error dumping service info: (Unknown error -2147483646) installd
Error dumping service info: (Unknown error -2147483646) storaged
Adding main entry (bugreport-lineage_land-OPM7.181205.001-2019-03-23-14-43-03.txt) from /data/user_de/0/com.android.shell/files/bugreports/bugreport-lineage_land-OPM7.181205.001-2019-03-23-14-43-03.tmp to .zip bugreport
dumpstate id 1 finished around 2019/03/23 14:44:48 (105 s)
Adding zip text entry main_entry.txt
dumpstate_log.txt entry on zip file logged up to here
Removing temporary file /data/user_de/0/com.android.shell/files/bugreports/bugreport-lineage_land-OPM7.181205.001-2019-03-23-14-43-03.tmp
Vibrate: 'cmd vibrator vibrate 75 dumpstate'
Vibrate: 'cmd vibrator vibrate 75 dumpstate'
Vibrate: 'cmd vibrator vibrate 75 dumpstate'
Final bugreport path: /data/user_de/0/com.android.shell/files/bugreports/bugreport-lineage_land-OPM7.181205.001-2019-03-23-14-43-03.zip
Sending broadcast: '/system/bin/cmd activity broadcast --user 0 --receiver-foreground --receiver-include-background -a com.android.internal.intent.action.BUGREPORT_FINISHED --receiver-permission android.permission.DUMP --ei android.intent.extra.ID 1 --ei android.intent.extra.PID 5632 --ei android.intent.extra.MAX 6135 --es android.intent.extra.BUGREPORT /data/user_de/0/com.android.shell/files/bugreports/bugreport-lineage_land-OPM7.181205.001-2019-03-23-14-43-03.zip --es android.intent.extra.DUMPSTATE_LOG /data/user_de/0/com.android.shell/files/bugreports/bugreport-lineage_land-OPM7.181205.001-2019-03-23-14-43-03-dumpstate_log-5632.txt --es android.intent.extra.SCREENSHOT /data/user_de/0/com.android.shell/files/bugreports/bugreport-lineage_land-OPM7.181205.001-2019-03-23-14-43-03.png'
drop_root_user(): already running as Shell
Broadcasting: Intent { act=com.android.internal.intent.action.BUGREPORT_FINISHED flg=0x11400000 (has extras) }
Broadcast completed: result=0
Final progress: 6115/6135 (estimated 6135)
Saving stats (total=12250, runs=2, average=6125) on /data/user_de/0/com.android.shell/files/bugreports/dumpstate-stats.txt
done (id 1)