Since the upgrade from KitKat to lollipop I am experiencing The following Issues
When I had KitKat , maximum camera resolution available was 5 mp at the back and 2.4 at the front
After the update : 4.9 at the back,1.9 at the front
Video performance very bad
I tried factory reset and it didn't work
spice mi 498 dead after flash with sp flash tool
after dead
and failed to get pmt info
Does not accept update
please help
I want a full flash file Or system files
Or backup by flash_tool
External RAM:
Type = DRAM
Size = 0x40000000 (1024MB/8192Mb)
NAND Flash:
ERROR: NAND Flash was not detected!
EMMC:
EMMC_PART_BOOT1 Size = 0x0000000000400000(4MB)
EMMC_PART_BOOT2 Size = 0x0000000000400000(4MB)
EMMC_PART_RPMB Size = 0x0000000000400000(4MB)
Related
E: unable to mount system, cache, data; no os installed , no usb debugging enabled
do any one have a solution for this???
THIS HAPPENED 2 WEEKS AGO,
WHILE TRYING TO FLASH STOCK ROM
THAKS IN ADVANCE :laugh::laugh::laugh::laugh::good:
yhyyyyy
plz do any one have the solution????
External RAM:
Type = DRAM
Size = 0x40000000 (1024MB/8192Mb)
NAND Flash:
ERROR: NAND Flash was not detected!
EMMC:
EMMC_PART_BOOT1 Size = 0x0000000000400000(4MB)
EMMC_PART_BOOT2 Size = 0x0000000000400000(4MB)
EMMC_PART_RPMB Size = 0x0000000000400000(4MB)
I flashed two spice mi 498 handset with SP flashtool "Format all+download " option.
.
now both sets are dead . no blink no signal of charging.
.
.
I know best way to flash it by Firmware update. But what to do ! now Firmware update option gives me error ... "Failed to get PMT info"
. please help
I want a full flash file Or system files
Or backup by flash_tool
Friend / Sir plz help me...
try to flash with miracle box with the same flash and check to wipe all android
Sent from my SM-G920F using Tapatalk
External RAM:
Type = DRAM
Size = 0x40000000 (1024MB/8192Mb)
NAND Flash:
ERROR: NAND Flash was not detected!
EMMC:
EMMC_PART_BOOT1 Size = 0x0000000000400000(4MB)
EMMC_PART_BOOT2 Size = 0x0000000000400000(4MB)
EMMC_PART_RPMB Size = 0x0000000000400000(4MB)
Here's my system info:
Code:
[VERSION]
NX9_61D_240_V1_8_YJLDS1_32_T3_L3_C4_G4_D_IPS_160708
[BRANCH]
11CW1352MP
GPLUS61A_11C_NX9
BUILD: bUILD_NO
SERIAL#:
[BUILD TIME]
2016/07/08 13:52
[MRE VERSION]3100
HAL_VERNO:
and memory test info
Code:
=============== Memory Detection Report ===============
Internal RAM:
Size = 0x0000D000 (52KB)
External RAM:
Type = SRAM
Size = 0x00400000 (4MB/32Mb)
NOR Flash:
Device ID = "[Winbond] SF_W25Q32JV" (275)
Size = 0x00400000 (4MB/32Mb)
NAND Flash:
ERROR: NAND Flash was not detected!
I need theese firmwqre files because
1. For some reason, the watch resets (anything not on the SD card is wiped like contacts and other personalization) every time the watch is turned off
2. I can't install .vxp apps
3. The Game Center and Browser's fonts are corrupt.
You may find your firmware there : https://drive.google.com/drive/u/0/folders/0B_hRh3DjuBoeNl9tM3ZRc0pDeTQ
before flashing make sure you backup your current one.
i bought a GT08 (or a GT08s, i dont really know for sure) on aliexpress and the rom on it never worked well, the touch screen was terrible and i would have to turn the watch off and on again in order for it to work. so i saved a backup and started downloading some different roms, in some the touch screen would work but the colors would be all wrong and in some my screen woudnt even turn on... that happens to a lot of people but i was not able to get a single one to work. i tried almost every rom on needrom and on the google drive files.
here is the memory test
=============== Memory Detection Report ===============
Internal RAM:
Size = 0x0000D000 (52KB)
External RAM:
Type = SRAM
Size = 0x00400000 (4MB/32Mb)
NOR Flash:
Device ID = "[GigaDevice] GD25LQ32" (236)
Size = 0x00400000 (4MB/32Mb)
NAND Flash:
ERROR: NAND Flash was not detected!
sorry for my bad english and i appreciate any help!
Hello ,
at some point the radio was blocked with black screen, unable to reset in the hope of being able to revive it loaded an incompatible firmware and died.
I recently found a firmware for JCAC10003, which didn't work but I noticed that the amplifier heats up.
The radio is detected on the PC to upgrade via Smart Phone Flash Tool, if anyone can point me in the right direction I would appreciate
some info:
AC8227L
MT6625NL
MT6323LGA
FSEIAD9D-16G
PB036H07
JRC4558 S00S8
TM2313
screen
LXJB070WDM352-1815-4 2019-11-19
EMMC:
EMMC_PART_BOOT1 Size = 0x0000000000400000(4MB)
EMMC_PART_BOOT2 Size = 0x0000000000400000(4MB)
EMMC_PART_RPMB Size = 0x0000000000400000(4MB)
EMMC_PART_GP1 Size = 0x0000000000000000(0MB)
EMMC_PART_GP2 Size = 0x0000000000000000(0MB)
EMMC_PART_GP3 Size = 0x0000000000000000(0MB)
EMMC_PART_GP4 Size = 0x0000000000000000(0MB)
EMMC_PART_USER Size = 0x000000039d000000(14800MB)
In my searches I found a USB update "oneStepUpgrade.rar"for my Head-Unit.
When I open the update image I have the files that we normally have to use in the smart Phone Flash Tool, but the scatter file is different. Can anyone help me create a scatter file compatible with the tool, or explain how I can use this one?
Thanks in advance