Cm12 install problem :/ [Resolved] - G2 Q&A, Help & Troubleshooting

Hi all world
I want Cm12 snapshot install but problem
My device twrp 2.8.6.1 its error
Sorry my english bad
I all friends respect and thanks..
e: Error executing updater binary in zip '/sd card/Cm12-20150625 snapshot d802 zip'
(Resolved)
My device lollipop but
I install google play store Kitkat with Autorec
My versions has changed old Twrp 2.7.0.0 and resolved all problems. Thanks friends...
The latest version is already problematic. 2.8.6.1

Some idea's:
- update twrp to latest (bumped)
- cm 12.1? (correct bootstack!)

try cm12.1 with bumped lp bootstak it will work
that problam from bootleader version u need kk bump bootleader

Updated script errors could be due to an outdated recovery as mentioned above or the rom is not compatible with the phone.

Rashed97 said that the caf rom will not work on jb bootleader even if u have latest twrp

Related

f300T - Cm10.2 Ok --> Update Cm11 Impossible

Hi all,
Before to explain my problem, I want to do my Apologies because I'm french and my English isn't Fluently ^^
So, I have a TF300T unlocked with TWRP. I setup the stable CM 10.2 for my tab and it was a success.
But when i want to update with the CM11 proposed in Settings of the Tab, i have this message in TWRP :
E : error executing updater in zip '/sdcard/cm-11.....
Error Flashing ZIP.
Failed in red
My intial config is JB Stock 4.2.1.
I tried to install a CM 11 directly with TWRP and didn't work ....
Can you Help ME please ?
I have to install CWM ? But wich version ?
Thanks for you help .
(Now i set up a official 4.2 from Asus (available on Asus Website) in waiting an issue)
With an OmniRom, I have the same problem ...
Sense
Sensenix said:
Hi all,
Before to explain my problem, I want to do my Apologies because I'm french and my English isn't Fluently ^^
So, I have a TF300T unlocked with TWRP. I setup the stable CM 10.2 for my tab and it was a success.
But when i want to update with the CM11 proposed in Settings of the Tab, i have this message in TWRP :
E : error executing updater in zip '/sdcard/cm-11.....
Error Flashing ZIP.
Failed in red
My intial config is JB Stock 4.2.1.
I tried to install a CM 11 directly with TWRP and didn't work ....
Can you Help ME please ?
I have to install CWM ? But wich version ?
Thanks for you help .
(Now i set up a official 4.2 from Asus (available on Asus Website) in waiting an issue)
With an OmniRom, I have the same problem ...
Sense
Click to expand...
Click to collapse
You need to use TWRP 2.6.3.2 to flash CM11 or OmniROM. Install it and then reboot back into CM10.2 and then install CM11.
Is there no recovery that will install both cm10 and cm11?
Sent from my TF300T using Tapatalk
kmoffat said:
Is there no recovery that will install both cm10 and cm11?
Sent from my TF300T using Tapatalk
Click to expand...
Click to collapse
It is not possible to flash both CM10 based ROMs and CM11 based ROM on the same TWRP without editing the ROM itself.
cmendonc2 said:
It is not possible to flash both CM10 based ROMs and CM11 based ROM on the same TWRP without editing the ROM itself.
Click to expand...
Click to collapse
Patches to make both work are under way. My MultiROM TWRP can do both without changes, but it is much harder to integrate into a normal ROM+recovery build. Those patches are still unstable.
Sent from my TF300T using Tapatalk
suggestions?
I currently am (happily) running cm10.2 with twrp v2.6.3.0, bootloader US_epad-10.6.1.27.5-20130902 but would like to try kitkat. Would multirom be an option? (I'm new to this, and have only tried CROMi-x and CM10.2) Or would a flash of an updated twrp and cm11 be a better choice for a newbie?
thanks!

Unable to flash any Room please help

Hello all i have LG LS980 sussesfully rooted and install latest TWRP i have sussesfully install Aroma installer rom but i am not able to flash other rooms i am trying to flash (
[ROM][3.2][5.1.1][All LG G2 Variants]BlissPop by Team Bliss)
but gating error
dev/block/platform/msm_sdcc.1/by-name/system
i tried different recoveries but same issue plz help me so i can flash other rooms
thanks
Which twrp version do you have and which zip of blisspop are you trying to install?
peachpuff said:
Which twrp version do you have and which zip of blisspop are you trying to install?
Click to expand...
Click to collapse
I am using twrp 2.8.6.1 i have tried different versions as well but same error also not only blisspop rom i have tried different roms as well like viper and Cyanogen but same issue kindly help me what should i do
Can someone help me please i am still waiting for a solution
no one is helping me ? please help guys and this problem is only with Lollipop roms i can stall KItkat without any issues

How do I go from Cloudy G2 2.2 to Bliss?

Hello. I want to try Bliss ROM, but I read that I need to get the latest bootstacks. No idea what that is. Found 30b and 30d versions. Also, I already have installed Dorimanx Kernel, which supports Kitkat only. Will that cause bootloops if I install Bliss (5.1.1), or does it automatically disappear when I wipe my device?
LG G2 d802,
Software version - Optimus G3 V1.4.1 + Dorimanx Kernel
Android Version 4.4.2
TWRP Version v2.7.0.0
Thanks in advance!
** Edit **
I thought people would respond quicker, and became impatient. So I decided to do it by myself.
Installed latest TWRP version, downloaded ROM + bootstack + Gapps, wiped everything, flashed the 3 zip files and it worked out.

F320L cm13 Recovery Problem

Hey i just installed perfect cyanogenmod 13 on my f320L (g2 korean ver) and i tried to flash cwm or twrp but after rebooting to recovery i gives me Secure Booting Error. Any solution? Maybe its kernel bug so do you know any custom kernel for Korean G2 with android 6.0? Thanks for any reply

(Solution) How to fix bootloop on You Yureka CM11 KitKat after installing TWRP.

I tried flashing TWRP 3.2.3.0 on my You Yureka which was running Stock cm11 KitKat. I searched a lot a after my phone got stuck in bootloop and apparently nobody knows the correct solution. So here is the correct solution.
Cm11 KitKat doesn't support the latest version of twrp. So you need to flash TWRP 2.8.6.0 (or any older version) on it using fast boot. Now TWRP should work. Now flash the Stock ROM using fastboot(I'm a new user so can't post link of it. Would be helpful if someone can.) Now, download the official cm12 update and UPGRADE from cm 11 to cm12 using this update from stock recovery. Now you can flash the latest version of TWRP and all custom ROM as other guides mention.

Categories

Resources