Hi , I'm writing on behalf of a friend who doesn't speak English.
He came to me with his note 3 in this condition and no matter what we do it always get back at this screen.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What can I do to help him out?
As far as I know he rooted with kingroot and flashed with flashy-fi twrp then he rebooted and got this image.
Thank you for your help will be much appreciated.
PS. I'm not new to rooting ecc but I never had a Samsung device so please I need detailed help .
Inviato dal mio SHIELD Tablet utilizzando Tapatalk
I recommend re-flashing the entire stock samsung ROM with Odin 3.07. You can download the n9005 ROM from sammobile.com. Just make sure you re-flash the same or newer version that what was on the phone.
And make sure you flash the stock rom from same region the phone came from. Flashing from other regions can mess up EMEI and other stuff (so you get no phone signal).
PS
Be sure your pc has samsung usb drivers installed.
Since i'm New to samsung world i found odin 3.10 do you think is the same ? I thik it was imported from Poland since i'm in Italy is better to put the polish one?
The phone is not operator lock (since he was using it with a italian sim ) and regoularly bought.
We do not care about warranty cause it already expired last week
Thanks guys your help is really appreciated
No. It because he flash recovery when boot. And on samsung rom. U can just simply flash twrp or cwm from odin. Then it will work fine
I have a Note 3 sm-n900w8 from Rogers and I flash ROM from other Canadian carriers and it is fine because I match the last 4 characters of the ROM from sammobile to what I had on the phone.
You should be fine flashing a ROM that matches the last 4 characters of the ROM that was on the phone. If you don't know which ROM was on the phone, I would just flash the most recent release.
You can use Odin 3.10 but I prefer Odin 3.07 whenever I flash Samsung phones.
You need flash new rom with ODIN application to continue normal boot.
فرستاده شده از itell K3400ِ من با Tapatalk
فرستاده شده از SM-N9005ِ من با Tapatalk
Come what you asked and much more.
After the phone got back to work, I rooted it myself and loaded twrp recovery ... Now even if he ****s up I can save him with a custom is flash.
Thank you all.
Inviato dal mio SHIELD Tablet utilizzando Tapatalk
Related
Hello people. Need help :-(
I have a GT-P6800 Preproduction version. Downloaded odin 1.85 downloaded latest stock firmware for it and decided to flash it. (the firmware on preproduction was horrible unusable) So I installed latest kies, ended kies processes entered tab in download mode. windows installed drivers n.p. saw my tab no problem but didnt complete flash :-( See attached picture :-(
After that id displayed to connect to kies to recover after an unsuccessful flash. Kies didn't recognize it. Then I desperately tried to flash cwm and YES!! It flashed and old shi**y preproduction os booted np :-(
I then decided to flash again but again and again bricked tab and reflashed back CWM.
And then I decided to clean dalvik cache from CWM and reset etc. after that android asked me for a password?!?! But I didn't apply any password :-( Then tried again and again and ruined so that download mode and CWM are still available but tab doesn't boot and is stuck on displaying galaxy tab 7.7 black screen :-( Please help! :-(
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my GT-I9100 using Tapatalk
Whats preproduction version?
The version before actual production version
Sent from my GT-I9100 using Tapatalk
hello, I'm like you, I have a pre-production model and I flashed my tablet with the following firmware: p6800 ZSLA2 ... with Odin. ... It works perfectly .... I advise you to do after you reset your tablet. ...
a hong kong version? ok thanks I will try it. Will be cool if it work
you can find the firmware in the next post .....
forum.xda-developers.com/showthread.php?t=1469635
The same error second screenshot
sorry, I can t help more but I advice you read topics in this forum about people who brické their machines ... it can help..... You should know that every time you flash your machine ... the internal memory becomes heavier weight of firmware .... and as you have flashed your machine many times, it n 'there can be more memory spaces? this is hypothetical ...
HY people! And I need help.
My problem is same as post no 1., from maximusl
I have 6810 (WiFi only) softbrick
My unit...
Kernel v.
2.6.36-P6810XXKJ2-CL558808
[email protected] #3
Build no:
HTJ85B.XXKI6 P6810XXKI6
In odin i get FAIL!
That firmware i can flash this unit with IR port?
went to flash lollipop firmware ZSUGOC3on my note 3 N9005 using odin but towards the end of it got a fail on odin and on my phone........ invalid ext 4 image..... Now my phone hasnt turned off still or tried to reboot what should i do.... here are the pics of the phone and odin
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Shall i try and turn it off and see if it boots up or if it will go back into download mode and and reinstall the german kitkat firmware with the pit file, as i have read other people have had problems flashing lollipop ,,...what is the best way of going about this ? dont want to hard brick it
Thanks in advance
Sico69galaxy said:
went to flash lollipop firmware ZSUGOC3on my note 3 N9005 using odin but towards the end of it got a fail on odin and on my phone........ invalid ext 4 image..... Now my phone hasnt turned off still or tried to reboot what should i do.... here are the pics of the phone and odin
View attachment 3239941
View attachment 3239942
Shall i try and turn it off and see if it boots up or if it will go back into download mode and and reinstall the german kitkat firmware with the pit file, as i have read other people have had problems flashing lollipop ,,...what is the best way of going about this ? dont want to hard brick it
Thanks in advance
Click to expand...
Click to collapse
Try to boot it. If works, install this APP and add some screenshots pls.
Joku1981 said:
Try to boot it. If works, install this APP and add some screenshots pls.
Click to expand...
Click to collapse
My phone is N9005 32gb version and had optus firmware australia 4.4.2 on it ...tried to install lollipop firmware from taiwan
ok got my phone into download mode yeh ,now shall i flash a 4.4.2 dbt firmware with pit file to downgrade as the taiwan 5.0 lollipop firmware failed or should i flash a new lollipop 5.0 firmware from another region say poland?
NE body out there can help me please
I brought my Note3 N9005 from online so i don't know which country firmware is for mine.
im non-rooted user and my phone's android version is 4.4.2 kikat.
My AP: N9005DXUFNG2
CP: N9005DXUFNG1
CSC: N9005OLCFNG1
i have two question for know:
1. Which country Kitkat/lollipop firmware should i flash?
2.How can i understand that?
SM-N9005 all roms other than Hong Kong version.
flash anything that's for N9005
Look here: http://www.sammobile.com/firmwares/database/SM-N9005/
The ng1 part of the information says Australia.
1. Install this APP and look for CSC CODE tab.
2. Go HERE and look the CSC of your phone model.
3. Download and flash it via ODIN
* Your device looks like more of Singapore. But check it anyway how I told you before.
Thanks
after flash xposed.SDK21.zip file mobile is not gooing to boot again stuck at samsung logo only. kindly help me out
So u mean any country of stock rom i can flash??
u have do some work
but why?
thanks
may be not
why u flashed that zip?
anyway,
1st goto recovery mode then give ur wipe data/factory reset.
if it doesn't work then restore ur stock rom from backup if u have.
2nd flash stock rom by odin
http://forum.xda-developers.com/member.php?u=4673855Joku1981
i follow ur suggestion and i found my actual firmware which is actually i need.
Yes ur right.My phone's firmware is Singapore.I got those information through my phone.....Just now im confusion which country code firmware actually i have to flash??
MM1 or SIN or STH or XSP ?????
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
https://www.dropbox.com/s/qxvnxx7atvwh3v1/Screenshot_2015-09-22-16-53-56.png?dl=0
This photo
XSP coz it's your active CSC Code.
Thanks a lot bro
XSP
Finally i flash lollipop rom of N9005 successfully without any problem.
Thanks a lot.
Leaked Meizu MX6 ROM
coming with Helio X20 and MM
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
:angel:
Nah I've had enough of Meizu's arseholery. Unless it can be fully unlocked and gets enough custom dev support I ain't falling for their crap again. My PRO 5 could be such an amazing phone in the custom scene but we're only just now getting TWRP and there is still a long way to go.
The PRO 5 will be my 1st and probably last Meizu phone.
showofdeth said:
Nah I've had enough of Meizu's arseholery. Unless it can be fully unlocked and gets enough custom dev support I ain't falling for their crap again. My PRO 5 could be such an amazing phone in the custom scene but we're only just now getting TWRP and there is still a long way to go.
The PRO 5 will be my 1st and probably last Meizu phone.
Click to expand...
Click to collapse
Meizu need to chage the strategy
MX6 3D Press and NFC have it?
Sent from my Meizu MX5 using XDA Labs
Answer please, you have this firmware? And what tools to be used for you got it?
I interested in it because I'm tryed to find any way to change ID of device to global, but SP Flash Tool don't allow to flashing without .auth file.
Would you have it? Please, help.
crosstech said:
Answer please, you have this firmware? And what tools to be used for you got it?
I interested in it because I'm tryed to find any way to change ID of device to global, but SP Flash Tool don't allow to flashing without .auth file.
Would you have it? Please, help.
Click to expand...
Click to collapse
+1
Sorry but is useless, if you brick an Meizu device only customer service can reflash it and repair it.
Inviato dal mio Z2plus utilizzando Tapatalk
crosstech said:
Answer please, you have this firmware? And what tools to be used for you got it?
I interested in it because I'm tryed to find any way to change ID of device to global, but SP Flash Tool don't allow to flashing without .auth file.
Would you have it? Please, help.
Click to expand...
Click to collapse
you can flash with flash firen not matter it*s Chinese or global rom
Hi there,tried the search without sucess ,after flashed GoolgeWiz Rom i´m unable to revert to stock firmware with Odin, it conectcs but nothing happens after i load the binaries.No i´ve installed Light rom to enable the OEM unlock but it´s hidden in the system.
i´m still having this probelm ,any hints? using Odin 3,13 and G950FXXU3CRGH_G950FOXM3CRGH_TPH binaries for mu Exynos S8
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
pbls said:
i´m still having this probelm ,any hints? using Odin 3,13 and G950FXXU3CRGH_G950FOXM3CRGH_TPH binaries for mu Exynos S8
Click to expand...
Click to collapse
Odin failing at sboot.bin could mean you are flashing wrong firmware for your phone or your trying to flash older version firmware than what is on your phone(bootloader version). Have you tried latest firmware g950fxxu4cri5.
Yes,I think it's the last one for my phone,actually using RENOVATE_ICE_G95X-13.4,but now I see that it was locked to a Portuguese operator, MEO and I'm trying to flash the unlocked operator rom, could it be that?
pbls said:
Yes,I think it's the last one for my phone,actually using RENOVATE_ICE_G95X-13.4,but now I see that it was locked to a Portuguese operator, MEO and I'm trying to flash the unlocked operator rom, could it be that?
Click to expand...
Click to collapse
Could be. I don't use carrier branded firmware and if I can help it never will there's enough crap just with Google and Samsung. If it does fail with unbranded (carrier) firmware then flash the carrier version. Either way you will more than likely need the latest firmware version to return to stock rom.
spawnlives said:
Could be. I don't use carrier branded firmware and if I can help it never will there's enough crap just with Google and Samsung. If it does fail with unbranded (carrier) firmware then flash the carrier version. Either way you will more than likely need the latest firmware version to return to stock rom.
Click to expand...
Click to collapse
it doesn´t want to cooperate,already tested a Carrier rom and unbranded and the error it´s always the same,after loading the binaries on Odin and the COM port get´s blues it fails on the first step.
Finally made it,using this tool https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
Thanks spawnlives for your help.