Share you CPU voltage table ! - Xperia SP General

here is my voltage table(in attachments) and it is working with no problems at all
share yours !

Thanks ,i was looking for this (didn't have time to find out myself nor the nerves)
I'll ne testing them as soon as i have time
I think you should add a warning on your thread because not all cpus are pefectly equal and someone else's might crach at these values

taha199428 said:
Thanks ,i was looking for this (didn't have time to find out myself nor the nerves)
I'll ne testing them as soon as i have time
I think you should add a warning on your thread because not all cpus are pefectly equal and someone else's might crach at these values
Click to expand...
Click to collapse
I think the phone will just freeze and you will just have to turn it off using the small button , no damage will occur as I know .

suliman lbabidi said:
I think the phone will just freeze and you will just have to turn it off using the small button , no damage will occur as I know .
Click to expand...
Click to collapse
You can kill your device if you put wrong value

Related

Disabling the annoying green-phone-light

Hi there y'all,
my xda neo / Prophet is always blinking green while he has got an telephone-connection with my provider and i hate that blinkin light, especially in my bedroom.
Has anyone got an idea how to disable this? Is there any possibility via Registry?
Thanks for any help!
a piece of black tape perhaps?
Try
HKLM\Drivers\BuiltIn\AllLEDMgr\Index
change the value to 0
__________________
I used LED Toggle which I attached. It works fine.
You do have to watch out though: disconnect your phone from power or your computer before you activate it. Using it once stops the light and using it again turns it back on.
It looks like the effect is gone after a softreset.
And another thing: some hours after using it my phone didn't respond at all for a few minutes. The only solution was a soft reset. This has happened several times now and when I keep the light on it seems to be working normal again. I don't know if it's just my Prophet but if you encounter the same problem we know where it's coming from.
Jayxz said:
I don't know if it's just my Prophet but if you encounter the same problem we know where it's coming from.
Click to expand...
Click to collapse
Thanks Jay, your little program works perfect. I'll see if i'll get the same problem and report it here
niketkumar, thanks for your help. I first try Jays Software, if i get the same problems i'll use your registry hack.
Thanks to both of you from my girlfriend, too - cause now it's less greener in our bedroom
So? Any news?
I stopped using the software and my phone hasn't crashed once. How's yours behaving?
Had the exact same problem, when using LED Toggle my device occasionally hangs. Since I stopped using it everything works just fine..
Man, that just sucks. I was so happy to be rid of that stupid light.
Now about that registry hack. I can find everything up to "\builtin" but the rest (AllLEDMgr\Index) doesn't exist. Do I have to create a new folder with an index file which has the value set to 0 or what?
Don't remember if I've tried the registry hack mentioned above, but I followed the thread about this issue in Modaco and tried numerous registry hacks before ending up with the only solution (that I'm aware of) that currently seems to work.
Which, unfortunately is the LED Toggle attached above, which in hand makes your device quite unstable..
So, back to the drawing board guys - hope someone finds a solution!
Just checked the corresponding thread on Modaco (http://www.modaco.com/index.php?showtopic=243948&st=0) and indeed this solution is not working flawlessly on our beloved Prophets..
Why not just place it face down on your dresser at night?
this has to be one of the dumbest hack request on the site!!! do as blunt man said and put it face down if it's that annoying!
gibster said:
this has to be one of the dumbest hack request on the site!!!
Click to expand...
Click to collapse
maybe you just don't understand it
gibster said:
this has to be one of the dumbest hack request on the site!!!
Click to expand...
Click to collapse
this has to be one of the dumbest comments i ever got in an professionals-board.
Jayxz, any of the workarounds i found generated problems so i just painted the light black. Not really the best solution but it sucked so badly
I find the green light annoying too, but i'd still like to have the orange warning when i received a msg or missed a call....
I hope that somebody could find a working solution for this
You can try the attached File i found at the MoDaCo Forum.
It works on my Prophet but some Users told that it drains the Battery
cu seneca
seneca said:
You can try the attached File i found at the MoDaCo Forum.
It works on my Prophet but some Users told that it drains the Battery
cu seneca
Click to expand...
Click to collapse
i tried this one but a taskmanager shows that ~10% cpu-usage is caused by this tool
enabling led blinking
Hi to All,
my HTC TYTN II always blinking green while he has got on phone-connection with my provider, and i love that. But now i have xperia and...no blinking on phone connection. It is possible to made it blinking when phone connection with provider is on

Elf won't start

hi all,
I've a problem with my htc touch, it doesn't won't to start !
everytime i turn it on it turns off right before the HTC welcome screen comes !
any idea what is that ? or how can i flash another rom ?
*it's fully charged
*my rom is Touch_of HD lite 3.0
Thanks
Hi,
Did you flash a new rom or something recently? How old is your battery? If possible....try changing the battery and giving it another shot.
it's a new battery about 2 months or something
yes this is a new rom i flashed it yesterday !
Thanks for your quick response
[email protected] said:
it's a new battery about 2 months or something
yes this is a new rom i flashed it yesterday !
Thanks for your quick response
Click to expand...
Click to collapse
Hmmm...there you go. That seems to be the problem. Perhaps you'd want to go back to the thread from where you downloaded the rom and check to see if anyone else has had similar problems on their device. Or maybe try to get in touch with the person that cooked it. You can PM them or something. I'm sorry but beyond this....I cant tell you what to do....I've never flashed a rom on my device. Still learning Perhaps someone else on this forum can guide you.
Good Luck
Thank you but i don't think the rom is the problem,
I entered the boot loader and tried flashing 2 different roms and the same thing happens right before the HTC welcome screen "the animated picture where HTC logo appears" the device turns of !
so what is that !!!!
any help please
mine like the fridge!
For troubleshooting, try to cool it in the fridge for some minutes before you turn it on. If this helps, then I have no idea what causes the fault! But you are one step closer by knowing if its a hw or sw issue
If this helps, then I have no idea what causes the fault!
Click to expand...
Click to collapse
lool
I tried what you said but didn't work too !
I think it might be the RAM or something .. what do you think ?
could be
I've red somewhere that its a RISC controller in the Elf. If so; it contains a RAM itself. So even tough I'm not a specialist on this things I belive that it could be a internal fault in the RISC or the multiplexer to the external RAM or the RAM itself. These things are all a motherboard issue that needs a replacement - in other words a new phone!
If its a SW problem it should work fine with the orignial ROM. On this field I shall keep my mouth shutt 'cus I know nothing about phone/smartphones!! I do think you should make it to the bootleg whit any ROM.. I belive!
have you tried to hard reset
1) Simultaneous press and hold "Power" and "Camera" key.
2) Press "Reset" once with the stylus and then release all keys.
Yes I've tried hard reseting !
These things are all a motherboard issue that needs a replacement - in other words a new phone!
Click to expand...
Click to collapse
That's a relief
Have you tried flashing one of the original roms onto your device? If not....give that shot. You'll find a list of all original shipped roms on the wiki.
I'm not sure
If the mailfunction started after you ROM-flashing "upgrade", then its more likely that its the software. But I know nothing about software on this things or what the symptom may be if theres a missmatch on the phone configuration/model and ROM.
guys I've tried everything even original roms
I think i've to change the board !
Thank you all

[Help] HTC P3600 Trinity freezing software and tearing screen

Hi, this is my first post here I didn't have time (and will) to read the rules and everything, so I just hope that this is the right forum for this kind of request.
Since you guys have showed up to be people with nice expertises, I request your help to avoid going to any support center and spend money for something that by lucky means, may be fixed at home
The problem is that when doing some operations, the device freezes and no action can be done, whatever button I press or wherever I click with the stylo.
The only thing that can be done to restore for a while the correct functionality of the device is to remove and reinsert the battery.
I don't know exactly when this problem started to show up, because the device isn't mine, so I don't even know what can be the possible causes.
I have also to say that this problem occurred few times at the beginning, but now it happens more and more often making it impossible the use of the phone. Sometimes I even can't turn it on.
I've tried to substitute the battery, but with all of them, the problem remains.
After that I've tried the software reset, didn't solve anything.
The hardware reset didn't solve anything either.
I thought then that maybe the operating system was going nuts, so I tried to flash the device putting WM6.1 Stratos FE+ on it (of course, following the guide and without doing anything wrong), but nothing changed.
I don't know what else it could be, so before throwing this piece of garbage in the bin I ask here for the last sentence, if you can help me.
I have some pictures attached of the phone freezing and the screen tearing up (looks almost like The Matrix movie).
Thanks in advance.
Hello,
From my experience, i think your problem is due to CPU overheating.
There are similar threads on this forum, regarding your problem.
I advice you to check those threads.
have anyone fix that problem? i have the same problem, but 3months before i put a rubber between the cpu and the metal cover and it worked, but now again and the rubber dont help anymore
I didn't do anything still on my phone, I am waiting that somebody gives us an answer
The only thing I did was to reduce the backlight brightness, according to the problem this guy has on this other thread -> hxxp://forum.xda-developers.com/showthread.php?t=596927
But the only thing I've got after this is that the phone lasts a bit longer before crashing
trinity
also here.
somethimes I must leave it without battery an hour or so to power up again.
nothing help. reinstal everything twice. even in stand by it freeze...
it's a wtf problem .....
also I'm very curios for some remedy. I incline to believe it's a hardware problem .....
please if anyone know how to fix that problem then say it here please
I have same model and same problem, When i press and hold central navigation key and power key it power on,and it work,few minutes....
On Monday I will overheat cpu and you hear the results ... hopefully positive
yes, please let us know. And what you mean overheat the cpu? How?
I want to fix mine too...
Thanks !!
Dear friends, problem solved ... overheating of components on PCB...
for all the info: [email protected]
really? hey what did you do ? please tell us.....
THANK YOU!!!
I have exactly the same problem with my htc can any buddy help or any sujjestion in this regard.
I have the same problem however
First, I flash back to ship ROM WM5
Second, I try to increase CPU speed up to 420 Mhz by using Pocket Hack Master
http://www.wizcode.com/articles/comments/pocket-hack-master-speed-configuration-guide/
Everything is testing, if you have your experience pls share
File as attached:
1. Install *.CAB
2. Copy patch file into folder
I join with the same problem.
Nobody has an idea how to fix that error?
@ivanish: can u please share your solution!!
how u solved that freezing problem ? plz can u share ?
thinh30 its overheating problem of cpu as i experiance this freezing problem when media player is in use for long time or during usb connection with pc
i think cpu speed should be lowered to avoid overheating and not increased
it's not that , the screen connector is destroyed , i have the same problem , it's not CPU , use search , there were solved this problem few years ago

[Q] Dead HTC HD2 (Why? Don't know - explanation inside)

Hi
I was playing an android game, can't remember wich one, when suddenly my HTC HD2 turned unresponsive (bloqued), so I removed the battery and powered it on again. When I did this, the bootloader opened but it seemed bloqued too, no android message, no bootloader opening, anything... And once again, I turned it off and powered on but now without any response, completly dead (Only a small vibration, diferent to the one when it power on. [equal like the one previous to the boot one, I don't know how to explain])... No charge led, no bootloader, no tricolor, but without any flash or something similar (Like most posts I have read)
Anyone knows how to fix it?
My htc is a HTC HD7 T-Mobile with MAGLDR (last version) and android 4.0.4 completly working before this
Thank you!
You mean you have an HD2 with MAGLDR, WP on NAND and ICS on SD, right?
First thing to check is the battery pins, easily bent after a battery pull. Make sure they are straight and make contact with the battery. Second thing, are you sure the battery has enough juice? It could be just an unfortunately-timed run out of juice.
If above is all checked, was the phone running hot (like .. HOT) prior to the freezing?
Thanks
Marvlesz said:
You mean you have an HD2 with MAGLDR, WP on NAND and ICS on SD, right?
First thing to check is the battery pins, easily bent after a battery pull. Make sure they are straight and make contact with the battery. Second thing, are you sure the battery has enough juice? It could be just an unfortunately-timed run out of juice.
If above is all checked, was the phone running hot (like .. HOT) prior to the freezing?
Click to expand...
Click to collapse
Thanks for your answer!
Not sure of the battery juice, I will try to charge it with a broken USB, directly with the cable or with another battery.
Pins seems to be OK, but I don't know. When the phone turned off I was only playing a 2D game ,for no more than five minutes, so I don't belive that it might be hot.
Some unsuccessful attempts
Okey, i tried to charge the battery with the usb but it does not work, so I tried to boot the phone using directly a 3.5 batery (similar to the 3.7 Output of the battery) and it does not work too... The mobile is completly unresponsive, the same vibration in the begining but nothing later..
Thank you!
whylly said:
Okey, i tried to charge the battery with the usb but it does not work, so I tried to boot the phone using directly a 3.5 batery (similar to the 3.7 Output of the battery) and it does not work too... The mobile is completly unresponsive, the same vibration in the begining but nothing later..
Thank you!
Click to expand...
Click to collapse
Well, this is weird. ................. I recall seeing a similar problem somewhere around here, but I don't know if it was fixed or not. Even if it were, I don't know how we're supposed to look for it.
You can try some basic stuff like :
- Changing the battery *try to use an HD2 one*
- Try removing the battery, sim and sd card. Leave them out for a few units time and put in the battery back and try it again.
You can try your luck and search the hd2 (you can use the link in my sig) fora with potential keywords..
.. I can't think of anything else ... I'm sorry.
More of it sounds like BGA failure. Did your phone got hot while playing games?
Also what settings on CPU were set?(freq and voltage)
Marvlesz said:
Well, this is weird. ................. I recall seeing a similar problem somewhere around here, but I don't know if it was fixed or not. Even if it were, I don't know how we're supposed to look for it.
You can try some basic stuff like :
- Changing the battery *try to use an HD2 one*
- Try removing the battery, sim and sd card. Leave them out for a few units time and put in the battery back and try it again.
You can try your luck and search the hd2 (you can use the link in my sig) fora with potential keywords..
.. I can't think of anything else ... I'm sorry.
Click to expand...
Click to collapse
Do not apologize, thank you, but I've already proved it and nothing ( I will try change battery)
retsam88 said:
More of it sounds like BGA failure. Did your phone got hot while playing games?
Also what settings on CPU were set?(freq and voltage)
Click to expand...
Click to collapse
I thing 1GHZ maybe less but no more. And voltage the default one (I don't know which one)
Thank you!
retsam88 said:
More of it sounds like BGA failure. Did your phone got hot while playing games?
Also what settings on CPU were set?(freq and voltage)
Click to expand...
Click to collapse
I have already asked him about that and he said "When the phone turned off I was only playing a 2D game ,for no more than five minutes, so I don't belive that it might be hot."
One more thing you can try, put the device in a sealed bag and put it in the freezer for about ten minutes. Then try to boot it up into bootloader (boot up while holding volume down). If it boots, then it's 99% the infamous overheating issue.
Report back.
Marvlesz said:
I have already asked him about that and he said "When the phone turned off I was only playing a 2D game ,for no more than five minutes, so I don't belive that it might be hot."
One more thing you can try, put the device in a sealed bag and put it in the freezer for about ten minutes. Then try to boot it up into bootloader (boot up while holding volume down). If it boots, then it's 99% the infamous overheating issue.
Report back.
Click to expand...
Click to collapse
Okey I will try now and comment later! Thank you for your attention!
whylly said:
Okey I will try now and comment later! Thank you for your attention!
Click to expand...
Click to collapse
Unfortunatedly it does not work too... If anyone else have any solution I will send it to SAT (worried about the price, the HTC was only 1 month old)
Thank you!
Marvlesz said:
One more thing you can try, put the device in a sealed bag and put it in the freezer for about ten minutes. Then try to boot it up into bootloader (boot up while holding volume down). If it boots, then it's 99% the infamous overheating issue.
Report back.
Click to expand...
Click to collapse
Explain please, what's the purpose of putting your phone in the freezer.
retsam88 said:
Explain please, what's the purpose of putting your phone in the freezer.
Click to expand...
Click to collapse
It is widely known that putting an HD2 with a faulty mainboard in a freezer for a few minutes will make it more likely to boot up (before it freezes or restarts again).
I don't know *why* this happens, I just know that it does. If you are not convinced, please do your own research
I do know how does BGA fail, and putting your phone in freezer WON'T do any good. It can only worsen the fate of phone, further damaging board or battery.
With all respect, don't give advice if you don't know what are you doing.
Anyway.
If you got warranty - RMA
If not, get infrared soldering station or look for one. Resoldering BGA(ball grid array-micro soldering points) on motherboard could help - CPU BGA tend to get loose sometimes. It's just the way it was designed.
Otherwise, if failed, replace mainboard.
That's it.
retsam88 said:
I do know how does BGA fail, and putting your phone in freezer WON'T do any good. It can only worsen the fate of phone, further damaging board or battery.
With all respect, don't give advice if you don't know what are you doing.
Anyway.
If you got warranty - RMA
If not, get infrared soldering station or look for one. Resoldering BGA(ball grid array-micro soldering points) on motherboard could help - CPU BGA tend to get loose sometimes. It's just the way it was designed.
Otherwise, if failed, replace mainboard.
That's it.
Click to expand...
Click to collapse
How can you be so sure it is faulty BGA as to start saying use this and use that?
I did not say the freezer will fix the problem, I just said it will help us identify it!
And to reply to the "won't do any good", here are two examples OF MANY:
http://forum.xda-developers.com/showpost.php?p=35436222&postcount=3113
http://forum.xda-developers.com/showpost.php?p=35430928&postcount=3112
@op An advice: don't do any of the IR soldering mentioned above or even open the device until you are certain it's the mainboard.
Marvlesz said:
How can you be so sure it is faulty BGA as to start saying use this and use that?
I did not say the freezer will fix the problem, I just said it will help us identify it!
And to reply to the "won't do any good", here are two examples OF MANY:
http://forum.xda-developers.com/showpost.php?p=35436222&postcount=3113
http://forum.xda-developers.com/showpost.php?p=35430928&postcount=3112
@op An advice: don't do any of the IR soldering mentioned above or even open the device until you are certain it's the mainboard.
Click to expand...
Click to collapse
First time it does not work, but I want to try it again
Thank you!
Marvlesz said:
How can you be so sure it is faulty BGA as to start saying use this and use that?
Click to expand...
Click to collapse
Because that's the symptoms of faulty BGA. System stop. Different vibration pattern and bootloader lockout. If memory failed, it's on motherboard. If CPU failed it's also on motherboard.
Marvlesz said:
I did not say the freezer will fix the problem, I just said it will help us identify it!
Click to expand...
Click to collapse
How in the world does freezing help identify motherboard fault? It's just nonsense.
Freezer trick can help identify BGA contact issues as the cooler temp contracts the CPU & can temporary cause the the solder points of the ball grid to contact and also keeps it cooler for longer sometimes allowing for longer run time or boot progress.
You are not freezing the device to -20 just simply quickly getting the device cool.
Done it myself to more than one hd2 & is a useful diagnostic prior to buying & swapping a mainboard or getting a current one reworked.
Okey, I tried again and nothing happened. I will call to HTC tomorrow and ask for a diagnostic (And price of repair...). I will coment it here as soon as I'll know something. Thank all of you for the help
hd7 ??
i thinks you wrong box this is HD2 General

HELP!! Hard Bricked Galaxy Note 4 N910F (is there a unbrick image ?)

hey so I kept recieving mmc fail when in odin so I downloaded another file with pit and surprise surprise it hard bricked my phone not the fake and brick like 100% legit hard brick ... phone isn't recognised on pc no indication when plugged into charger no buttons and or screen response attal I have never used unbrick image before but I see people talking about them for the note 4 could someone please give me download links . preferably not mega due to download quota .
or any other solutions would be great !
also would a usb jig work ?
ahhhhhhhh!
Try putting the phone in deep freezer for atleast 5 minutes & then start pressing recovery buttons. If it didnt work try this https://forum.xda-developers.com/note-4/snapdragon-dev/note-4-debrick-img-t3488114 .
What ?
In what deep freezer ? . and I did refer to other post however its all mega links and iv used my quota today .. But yeah please explain deep freezer ?
kamalnath93 said:
Try putting the phone in deep freezer for atleast 5 minutes & then start pressing recovery buttons. If it didnt work try this https://forum.xda-developers.com/note-4/snapdragon-dev/note-4-debrick-img-t3488114 .
Click to expand...
Click to collapse
You my friend are an absolute legend !! freezer worked enough for me to put twrp on it .. then I installed a custom rom as still the same error as before with odin ... after custom rom flashed stock via odin and it worked and now its fine lol wtf ... although temp is very high on cpu sitting at 110 farnheight resting and over 180 just with browsing internet :/ any ideas ?
giveusgames said:
You my friend are an absolute legend !! freezer worked enough for me to put twrp on it .. then I installed a custom rom as still the same error as before with odin ... after custom rom flashed stock via odin and it worked and now its fine lol wtf ... although temp is very high on cpu sitting at 110 farnheight resting and over 180 just with browsing internet :/ any ideas ?
Click to expand...
Click to collapse
No no. Its completely normal for the phones these days. It may even go beyond that like 195 deg F & then starts the thermal throttle, which pushes the CPU back to Minimum to return to cooler temparatures & Dont forget to install an app called SOD Killer from playstore, Cuz it will help your phone not go back to sleep when you lock it. You can ask any doubts you like & I will be here to help you & dont forget for a fact that i recieved this phone only a week back from my brother in exchange for my Moto X Style, Cuz he had the same same issue as yours. Next time if your phone does not unlock dont use flash because it will do nothing, Only freezer tip & SOD killer or other wakelock app can save you. Glad it helped you, cheers
kamalnath93 said:
No no. Its completely normal for the phones these days. It may even go beyond that like 195 deg F & then starts the thermal throttle, which pushes the CPU back to Minimum to return to cooler temparatures & Dont forget to install an app called SOD Killer from playstore, Cuz it will help your phone not go back to sleep when you lock it. You can ask any doubts you like & I will be here to help you & dont forget for a fact that i recieved this phone only a week back from my brother in exchange for my Moto X Style, Cuz he had the same same issue as yours. Next time if your phone does not unlock dont use flash because it will do nothing, Only freezer tip & SOD killer or other wakelock app can save you. Glad it helped you, cheers
Click to expand...
Click to collapse
Yo, did you get this information from my post?
piluvr said:
Yo, did you get this information from my post?
Click to expand...
Click to collapse
Nope, i consolidated everything i have read in this forum for past 5 days.
Many thanks deep freezer made the job. Before that I was trying few diffrent roms, Odin versions, even computer and usb cable - only deep freezer helped
what is deep freezer exactly?
Elijah5133 said:
what is deep freezer exactly?
Click to expand...
Click to collapse
-12 Celsius that one I own.

Categories

Resources