Hi, this is my first post. I'm a self-experienced using Android. For year I had no problems with my devices. I had a Motorola G 1st generation who worked fine, but I waste it. Now, I bought ZTE Blade L3. Such as Moto G, Miracast feature is not enable (at least in my stock rom).
I want to know if this device is compatible with that technology (read that works in every phone since 4.2.x).
This phone has Android KK 4.4.4.
Tried to first connect trough WiFi Direct a Miracast Dongle (easycast), but the phone doesn't connect. Then, I tried whith screen cast option, and the same. Finally, I looked forums how to unlock modifying bootloader.ini, just as I had to do Moto G. I added the lines with BuildProp editor after rooting with Kingo Root:
persist.sys.wfd.virtual=0
persis.debug.wfd.enable=1
AAAAAND nothing happens
I need some help, first to know compatibility (wifi drect certification page is down, unfortunately), if there is a ROM that solve this problem (CM maybe?) and if there are other lines that I must add to buildprop.
Thank you very much for your asnwers, and sorry for the bad english (I'm from Chile).
If you need any further information, please ask!!! :laugh:
UPDATE: use #MirrorEnabeler and the message is "Your Rom is lacking the audio_submix file. You must contact your device mantainer and ask them NICELY no imlement it. Please refer to the red part of the original post on XDA-Developers" This going to take long time, so decided to install stock ROM from other country using SP Flash tool, to see if it has the same problem.
UPDATE 2: Stock ROM from other country, same problem. Rooted the phone to make changes using KingRoot. Followed instructions from this thread http://forum.xda-developers.com/har...experimental-enable-mirroring-device-t2812193 The thread was closed, and will create another thread for dongles (no chromecast)
It says, or those STILL having issues,
Check /system/lib/hw directory for the file "audio.r_submix.default.so".
If it doesn't exist, ask your device maintainer to add audio.r_submix.default to
the product_packages in the device.mk file. (You may not know what it means, but they will.)
So, Asked my mobile company to do the changes, they said "the manufacter must". Contacted ZTE to do what is being said, and ther is still no answer.
Will ask in thread posted after, to see if they can help me. Please let me know if somebody can run Miracasr in his Blade (also did't found another ROM that's not a Stock one)
created another thread in hacking software http://forum.xda-developers.com/har...e/help-to-enable-miracast-feature-to-t3209364
Hola, también soy de Chile y tengo un ZTE blade A460.
Compré un Miracast Dongle y no puedo hacerlo funcionar con mi celular.
Encontraste alguna solución? mi android es 5.1.1. y el dongle OKCast.
Puedes ayudarme??? tengo que rootear el celular?
Related
Another ROM you say? I've tried all the Acer-based 3.1 custom ROMs and none of them seem to suit my needs. They seem to add lots more bloatware and tweaks that made my tablet quite unstable.
So I went ahead and built my own ROM which essentially is a pruned-stock standard Acer 3.1 with only the barest minimal features to maintain speed and stability of the system. I've also gone ahead and deodexed most all of the frameworks and apps so feel free to mod this rom to add custom skins and animations if you so please. I'm sharing my work in the hope that you will find it useful.
The ROM can be downloaded here - http://www.multiupload.com/9H43RO49H0
Please leave questions, comments and queries below.
*Patch update* - I made a slight error in the update script and didn't set the right permissions for Superuser access. Apply this patch to fix it if your ROM doesn't have a working Superuser.apk - http://www.multiupload.com/RUO6SVRXEV
Stable ROMs are always welcomed. Never too many of those!
I like them too, i will give it a shot!
Anyone tried it yet? Thoughts? I have it ready to go, but would like to hear what others think before jumping in.
Updated the ROM to fix the root access.
Muy buenas ,
Yo llevo esta ROM ahora mismo ya que a mi no me gustan las ROMS con programas de inicio me gusta poder instalar yo lo que quiera y de momento va perfecta muy buen rendimiento , buen consumo de la bateria , ningun reinicio ni cogelacion del iconia expontaneo ...
Saludos !
Thanks for this ROM. I had been deleting apps I did not want but could not get past the Vendor subdirectory. This is now my daily ROM.
Does this still have the annoying, battery wasting "screen on in standby" problem?
Just installed it and work well for me. Thanks!
I'm going to try this now, I'm unimpressed with the acer 3.1 update, lots of FC, dhcp issue on wifi, overloaded ram (seems to have worse mm than 3.0.1).
argh!
looking forward to yours!
Thanks for the rom .slight problem can t seem to gain root acsess i installed the su patxch even though i have a working superuser .apk/ using v1.2 gingerbreak can t root help!!!
Try this root method, it is especially for 3.1
http://forum.xda-developers.com/showthread.php?t=1138228
plemme61 said:
Thanks for the rom .slight problem can t seem to gain root acsess i installed the su patxch even though i have a working superuser .apk/ using v1.2 gingerbreak can t root help!!!
Click to expand...
Click to collapse
Sorry if Superuser isn't working for you. I didn't test the update script for the patch so that might be why. I have however updated the main ROM image in Post 1 to have support for SU.
You can download it here - http://www.multiupload.com/9H43RO49H0
Is there anyway to pre-build root access and USB 3G support in your ROM?
root access is already there
nowforever said:
Is there anyway to pre-build root access and USB 3G support in your ROM?
Click to expand...
Click to collapse
Yes, I can make a patch that you can apply to your stock ROM to get USB 3G support.
ETA ~ 4-5 hours.
tried this morning..migrate from honeyvillian....honestly I'm very happy with rom..fast and stable...didn't encounter any problem...yet....will stay for a while...thanks chef
Anyone got the cifs.ko working? with this rom? i used the same cifs.ko i used with the leaked kernel so it should be ok
Hello folks. I am new owner of the Acer A500 and naturally, a total noob in these matters, but could the OP please post installation instructions and perhaps even a list of what has been taken out from the stock Acer firmware??
Hope I am not asking for too much here.
This is weird, I was using p2-2 rom and had it oc'ed at 1540. I have been switching back and fourth between roms to see which is more smooth and stable, Mininmalist 3.1 was the last I tried that I am on now, And this rom is running fast and very stable, I think I'll stay with minimalist.
Sent from my A500 using Tapatalk
Just got my LG G2 D806 from Personal Argentina, since this carrier loads their roms full of cr*p that i don't want, i would like to flash a new rom, so first i need to know:
1) Which recovery (preferably TWRPM) should i use
2) Which comunity ROM keeps most of the "useful" features the phone ships with (IR Remove / Knock to Wake etc etc )
Thanks!
To reply my own question, at least par of it, i was able to succesfully flash TWRP on the D806 by using the files for the D802, i used this tutorial:
http://theunlockr.com/2013/11/03/flash-custom-recovery-lg-g2-versions-video/
TWRP for this device can be downloaded from:
http://techerrata.com/browse/twrp2/g2d802.
Now i need some suggestions on what ROM to try.
elfarto said:
To reply my own question, at least par of it, i was able to succesfully flash TWRP on the D806 by using the files for the D802, i used this tutorial:
http://theunlockr.com/2013/11/03/flash-custom-recovery-lg-g2-versions-video/
TWRP for this device can be downloaded from:
http://techerrata.com/browse/twrp2/g2d802.
Now i need some suggestions on what ROM to try.
Click to expand...
Click to collapse
gracias, ya lo habia rroteado por las mias , pero no encontraba como meterle el recovery,rooteado y con recovery, hay que investigar un poco el te ma de los kernel y roms, mañana pruebo flashearle una rom aprovechando los 10 dias de garantia del local de personal.
Expect this to be closed shortly. ROM comparison threads don't last too long on here.
Regarding your question, I prefer TWRP, but both recoveries are useful and effective. For ROMs, best to browse the developer subforum for your particular variant and give a few a try. The answer to which ROM is best is highly subjective (and leads to flaming/trolling, hence the reason this'll be closed soon). What one finds to be the best could be different than your opinion. Try a bunch and see which one meets your needs/expectations.
Hey all! I'm new to XDA. I am looking at the Blu Studio X to use with Straight Talk. I am wanting to know if there is any way you can root the phone, one click (or tap), or if I have to go into my PC and do it. I had a Moto G through Boost Mobile a while back and I didn't know about Kingroot at the time, so I had to use my PC to unlock the bootloader, etc. so I know how to do that kinda stuff. But anyways, I just want to know if I can root my new phone permanently, and if there are any custom ROMs (Like CM12) OR any Custom Recoveries (TWRP or CWM) I would also like to know how to make my own builds. So if anyone is available to teach me how to make my own ROMs or builds for recoveries, message me please. All help is welcome. Feel free to post other questions to this thread also. Once I have the phone, I will try my hardest to help other people with their issues/concerns about the phone. Thanks!:good:
I don't know if you care anymore, from what I've heard, there is no custom ROM for the Studio X, but someone has made a port of TWRP on the Google + community for BLU Development. The only bad thing is that it doesn't have touch when you boot into TWRP, so I don't know how to move around unless you use TWRP manager or something. You can root with Kingoroot, Kingroot (if you don't want a custom recovery), or Towelroot for some lucky devices. I wish someone made a community for this on XDA because it is such a great phone for the price and design! I'm getting one soon to replace my 1st generation Galaxy Note.
Good luck!
tdm
Has anyone seen or know about a recovery for BLU GRAND HD (not 5.5) its running 4.4.2 already rooted i rooted with kingroot then swithed to SuperSU . Can anyone give me an answer is their a sure way to install custom recovery
wslvjohnny said:
Has anyone seen or know about a recovery for BLU GRAND HD (not 5.5) its running 4.4.2 already rooted i rooted with kingroot then swithed to SuperSU . Can anyone give me an answer is their a sure way to install custom recovery
Click to expand...
Click to collapse
Hey! I'm xdacoldkade, how did you root your device without Bricking it ? I have one running 6.0
Polo
Como rootear un blu studio G3... Ya eh buscado tantas app y en programas y nada... (se que no tiene nada que ver con el tema)
This is my first ROM for a MTK device, so you will need to have some patience.
No files by now, because it's a pre-alpha. Once the rom is somewhat useable I will upload the needed files.
By now you can see:
http://imgur.com/tzUFoD0
Please, don't ask me for files. I will work on this image only in my sparse time, so the development could be slow.
WORKING:
Wifi
Bluetooth
Lights (screen brightness)
NOT WORKING:
Audio
Default android launcher (no watchface)
Sensors
No Gapps
NOT TESTED:
Modem
For my use
And this too
Cojo sitio!
Enviado desde mi MX4 mediante Tapatalk
Very nice
Amazing!
Nice! I think with us devs playing to our strengths we should be able to put some polish on the W812a. A working 5.1 base also opens up a few doors app wise.
corvus said:
This is my first ROM for a MTK device, so you will need to have some patience...... .....
Click to expand...
Click to collapse
Excellent idea, and thank you for this work. It is a pleasure to see these active community for this device.
Sorry for my translation by goolge
Very pleased to see this @corvus
Great effort mate - thanks very much !
This will open be a big step forward in the way of development.
Let us know if there's anything we can do.
I have a K8 Mini, a D5 and a K8 regular round - so does @Lokifish Marz and @cyrux75.
Cheers
There are some big problems with this rom. I try to port the launcher of the K8 mini but like Lokifish said in another thread there is not a unique apk and some resources are spread in several apks in the stock image. Audio is not working, and I do everything that I can to get it working, but by now no luck, and the bigger problem is sensors, they have some kernel modules (not a problem, because we use the same kernel) that are loaded with a bunch of binary files, and those binary files only run in KitKat, and don't work in Lollipop (and they will never work without recompile them to work in L), so no sensors in this image and seems that we will never get them until some chinese manufacturer release a L image in a device with this sensors.
I try to port the Omate Truesmart+ image that it's Lollipop and same mtk chipset, but without luck (and seems that they have another sensors, so I don't spend so much time on this).
So, if some one with more experience that me in mtk devices wants to take a look or ask something, I'm open to share my work with anyone.
What about a simple ROM with Nova Launcher and GAPPS?
Without audio or sensors? and with a draining battery... I'm not sure that this will be useful for anyone. I could share the zip, but I don't want users without the needed knowledge using it, breaking their devices and coming back to ask me why it's not working.
Anyway I continue searching for another rom from where make a porting with the same sensors.
-----
Vamos, que la rom es bastante inutil por ahora y no quiero romper nada a nadie. Pero sigo investigando...
corvus said:
Without audio or sensors? and with a draining battery... I'm not sure that this will be useful for anyone. I could share the zip, but I don't want users without the needed knowledge using it, breaking their devices and coming back to ask me why it's not working.
Anyway I continue searching for another rom from where make a porting with the same sensors.
-----
Vamos, que la rom es bastante inutil por ahora y no quiero romper nada a nadie. Pero sigo investigando...
Click to expand...
Click to collapse
what about using the android 5.0 that is on W3 smartwatch , i know that it is a BT watch but before the new update it had android 4.3 that means it is'nt Wear but lollipop, no?
check with
https://www.youtube.com/watch?v=k-O80LWcILQ
soniasophie9697 said:
what about using the android 5.0 that is on W3 smartwatch , i know that it is a BT watch but before the new update it had android 4.3 that means it is'nt Wear but lollipop, no?
check with
https://www.youtube.com/watch?v=k-O80LWcILQ
Click to expand...
Click to collapse
The W3 is completely different architecture. It uses an Ingenic M200 MIPS.
I stumbled across this one:
http://www.mtkroms.com/2016/02/bugless-resurrection-remix-for-mt6572.html
I'm actually not a developer, but maybe it is of some use for your work. At least it is our chipset and kernel.
Yes, one of this roms is what I use as base, but sensors are hardware dependant and watch has not the same hardware than a phone
Hello to all, was abandoned this project? We are not talking any more.
bettuccio said:
Hello to all, was abandoned this project? We are not talking any more.
Click to expand...
Click to collapse
Nothing to talk about. No drivers = no rom.
pablo11 said:
Nothing to talk about. No drivers = no rom.
Click to expand...
Click to collapse
I am sorry for this. Thanks for the reply Pablo.
Hi guys
Sorry if this is answered somewhere but I can't find a resolution.
I have G900FXXS1CPC8_G900FSLK1CPB2_SLK with Philz Touch and screen mirroring always fails. Is this a known problem? Tried the usual cache stuff, without success. Casting is fine but not screen mirroring.
Thanks
Sent from my SM-G900F using XDA-Developers mobile app
By the way, everything works great. Had some problems with TB. If you restore app and data backups I always got a FC. Otherwise it's smooth with good battery life
Sent from my SM-G900F using XDA-Developers mobile app
I meant to say everything works well apart from screen mirroring
Thanks
Sent from my SM-G900F using XDA-Developers mobile app
Remedy
Settings -- developer's option-- authorise wireless display devices.
Hi
I have the same problem.
On Lolipop screen mirroring was 100% Ok with my Samsung TV
On MM 6.0.1 (stock XEF + Root + TWRP) screen mirroring is no OK.
The Tv attempt to connect S5 (or S5 attempt to connect Tv), Tv look S5 but sceen mirroring not work and Tv is deconnected.
No change with : Settings -- developer's option-- authorise wireless display devices.
Have you 1 idea ?
Thanks
I too have this problem with screenbeam mini 2 and have tried the Settings -- developer's option-- authorize wireless display devices. with no luck. Has anyone come up with a solution????
Anyone else running into this???? I have gone through several sceneries with no success. Just to clarify this is for wireless mirroring only, mirroring via mlh adapter works fine. Another strange note is that screen mirroring on my secondary ROM works flawless. I am dual booted now in order to use my screen beam mini 2 with my car. This is the only resolution I have found. I am running Resurrection Remix nightly as my secondary ROM and cast works perfect
Seriously No One Else????
mapobean said:
Anyone else running into this???? I have gone through several sceneries with no success. Just to clarify this is for wireless mirroring only, mirroring via mlh adapter works fine. Another strange note is that screen mirroring on my secondary ROM works flawless. I am dual booted now in order to use my screen beam mini 2 with my car. This is the only resolution I have found. I am running Resurrection Remix nightly as my secondary ROM and cast works perfect
Click to expand...
Click to collapse
I have yet to resolve this issue and cannot believe that no one else has come across this. Someone please comment, i know there are some genius people on XDA.
mapobean said:
I have yet to resolve this issue and cannot believe that no one else has come across this. Someone please comment, i know there are some genius people on XDA.
Click to expand...
Click to collapse
Has anyone fixed this or is it just me????
Screen mirroring stopped working for me after upgrading my S5 to marshmallow.
I got it working again though using this fix from the xda S6 forum
http://forum.xda-developers.com/showpost.php?p=65793161&postcount=9
Using any root explorer go to system/build.prop
-add this line at last
wlan.wfd.hdcp = disable (remove any spaces after that)
- save and reboot.
Click to expand...
Click to collapse
mbdroidsony said:
Screen mirroring stopped working for me after upgrading my S5 to marshmallow.
I got it working again though using this fix from the xda S6 forum
http://forum.xda-developers.com/showpost.php?p=65793161&postcount=9
Click to expand...
Click to collapse
Thank you, this works for me ?
mbdroidsony said:
Screen mirroring stopped working for me after upgrading my S5 to marshmallow.
I got it working again though using this fix from the xda S6 forum
http://forum.xda-developers.com/showpost.php?p=65793161&postcount=9
Click to expand...
Click to collapse
This does not work either for me. I've tried every "FIX" on the web, still cannot mirror.
I have been having this same problem as everyone and I JUST GOT MINE TO WORK!!!!
I have been trying many things. Currently the screen mirror patch is UNINSTALLED and I did clear my cache. The following is what seemed to help...
I did the "developer option"-> "authorize wireless display devices" option
Next I tried to screen mirror with my Screenbeam mini2 and noticed some new options were available below the displayed name of my mini2.
I played around with the settings but with everything back to its default settings and "Operating channel" changed from "Auto" to 36, I made "Magic happen".
After that first connection the "Operating channel" returned to "Auto" and it will auto connect all day long.
It's a lousy fix and I blame Marshmallow for this.
Hope this helps.
habilitar screen mirroring para cualquier tv
a mi me funciono en un celular s5 con android 6.0.1
desconosco si funciona en otros celulares:
1. instalar root explorer
el cel debera estar rooteado,
el programa le pedira permiso root
2. ejecutar root explorer
- ir a system
- habilitar lectura/escritura
- abrir build.prop con editor de texto
- al final del texto agregar
wlan.wfd.hdcp=desactivar
guardar y salir
3. en el cel habilitar opciones de desarrollador
4. en el menu de desarrollador habilitar
pantallas inalambricas
5. reiniciar el cel
6. listo ahora puede concectar el espejo a
cualquier tv.