Database Users

[THOR] Successfully rolled back to 13.3.1.0 (Safestrap working)

Just let you guys know. I have Safestrap back to work
This is instructions to roll back to 13/14.3.1.0 from earlier version than 1x.3.2.5
Download below file and tool:
HDX ToolKit:
http://forum.xda-developers.com/showthread.php?t=2665683
Roms:
13.3.1.0 (Kindle HDX 7"): https://s3.amazonaws.com/kindle-fire-updates/update-kindle-13.3.1.0_user_310079820.bin
or
14.3.1.0 (Kindle HDX 8.9"): https://s3.amazonaws.com/kindle-fire-updates/update-kindle-14.3.1.0_user_310079820.bin
Build prop editor:
https://play.google.com/store/apps/details?id=com.jrummy.apps.build.prop.editor
PLEASE READ INSTRUCTION CAREFULLY
INSTRUCTION:
1. Root your Kindle by HDX ToolKit
Instruction at: http://forum.xda-developers.com/showthread.php?t=2665683
1.1 Do not turn off Auto Update, just turn off and forget wifi to prevent auto update
1.2 If you have safestrap installed, remove it.
2. Change Version and Build Number to lower values than 13/14.3.1.0 and 310079820
2.1 Use Build prop editor
2.2 Change those lines:
ro.build.version.incremental : "13.3.0.9_user_300079820"
ro.build.version.number : "300079820"
ro.build.description : "thor-user 4.2.2 JDQ39 13.3.0.9_user_300079820 release-keys"
ro.build.fingerprint : "Amazon/thor/thor:4.2.2/JDQ39/13.3.0.9_user_300079820:user/release-keys"
(same for apollo but use: 14.3.0.9 and keep apollo name in description and fingerprint - only change build number and version)
3. Reboot the Kindle and go to Device > System Updates to check if Version and Build Number changed
4. Do manually update to 13/14.3.1.0
- Connect Kindle to PC by usb cable
- Copy rom file (.bin) from PC into Internal storage
- Go to Device > System Updates and Press Update
5. Root and install Safestrap HDX ToolKit.
Instruction at: http://forum.xda-developers.com/showthread.php?t=2665683
6. Press Thanks
FOR 1x.3.2.5 and 1x.3.2.6
kaeru00 said:
USE IT AT YOUR OWN RESPONSIBILITY because rewrite recovery partition.
How to use it.
1. install Towelroot and Supersu using KFHDX Toolkit v 0.94
2. If Disable OTA update , Airplane mode ON and Enable OTA update
3. If Install SafeStrap, uninstall safestrap on App.
4. Put "update-kindle-1X.3.1.0_user_310079820.bin" in SAME folder,
5. execute install.bat
6. reboot
7. put update-kindle-1X.3.1.0_user_310079820.bin" in internal storage.
8. Downgrade, wait a minute on the update menu, because display update button to take time.
9. disable OTA update.
This batch file works "kindle fire hdx 7" ONLY
This is tested on version 13.3.2.5 and 13.3.2.6.
http://d-h.st/MAs
This batch file works "kindle fire hdx 8.9" ONLY
sorry I do not have kindle fire hdx 8.9. I cannot test.
10/3/14 update build.prop
http://d-h.st/Tz8
Thank @Poesini
Very good that the rollback of Apollo is working .
Click to expand...
Click to collapse

umm
058515471 said:
Just let you guys know. I have Safetrap back to work
Instructions:
1. use Vroot to root : http://forum.xda-developers.com/showthread.php?t=2781665
2. chage current version and build number in build.prop to lower values:
ex: i change to: 13.3.0.9_user_300079820 (replace all cases in your file)
3. restart the kindle and go to Device > System Updates to check if it changed.
4. Factory reset the kindle
5. Do manually update the 13.3.1.0
(https://s3.amazonaws.com/kindle-fire-updates/update-kindle-13.3.1.0_user_310079820.bin, copy to internal storage and go to System Updates > Update)
After updated, VROOT will gone, no more Chinese App worring.
6. Root and install Safetrap: http://forum.xda-developers.com/showthread.php?t=2665683
Click to expand...
Click to collapse
okay well I haven't seen any of the senior guys verify the root to be safe much less being able to roll back by simple mod. that has been attempted before. I am waiting for verification. I get the feeling somebody is going to be able to call the BS but hey 1 can always hope.
---------- Post added at 05:50 PM ---------- Previous post was at 05:40 PM ----------
jimyv said:
okay well I haven't seen any of the senior guys verify the root to be safe much less being able to roll back by simple mod. that has been attempted before. I am waiting for verification. I get the feeling somebody is going to be able to call the BS but hey 1 can always hope.
Click to expand...
Click to collapse
I have a blacklisted 13.3.2.2_user_322095220 im willing to test with but so far I havent even been able to find right tool with info provided iv tried a couple of apks and a couple run on pc all vroot...no luck here

I attempted this apparent root and did not get results. Figured it would not work since i have tried vroot in the past. Wait until there is more verification from other trusted members of the community.

+1
iMJets said:
I attempted this apparent root and did not get results. Figured it would not work since i have tried vroot in the past. Wait until there is more verification from other trusted members of the community.
Click to expand...
Click to collapse
FAIL FAIL FAIL FAIL and then FAIL
Omg! Confirmed ! Confirmed! Confirmed!
Was 13.3.2.2 now 13.3.1.0 rooted with safestrap!

i dont know if vroot will work in your devices or not, but it work for me.
However, Safetrap didnt work and I dont like Chinese apps, so i tried to roll back and got lucky (maybe) .
Now, SuperSU and Safetrap are working perfectly

hey! Thor may be rooted?? how? i try not

jimyv said:
FAIL FAIL FAIL FAIL and then FAIL
Omg! Confirmed ! Confirmed! Confirmed!
Was 13.3.2.2 now 13.3.1.0 rooted with safestrap!
Click to expand...
Click to collapse
IT WORKS!

jimyv said:
IT WORKS!
Click to expand...
Click to collapse
my firmware is 13.3.2.3.2 may be root????

try
Well try
Romaster_3.4.3.7593_Setup
at your own risk of course

jimyv said:
Well try
Romaster_3.4.3.7593_Setup
at your own risk of course
Click to expand...
Click to collapse
i have been root with this tool but i can't install safetrap in this firmware.

read op
saphi95 said:
i have been root with this tool but i can't install safetrap in this firmware.
Click to expand...
Click to collapse
now follow the op and roll back to the original rootable softwareand reroot with correct supersu then install SS

jimyv said:
now follow the op and roll back to the original rootable softwareand reroot with correct supersu then install SS
Click to expand...
Click to collapse
ok i will try it.

always
saphi95 said:
ok i will try it. but i 'm fear my devices was brick
Click to expand...
Click to collapse
do anything here at your own risk

saphi95 said:
ok i will try it. but i 'm fear my devices was brick
Click to expand...
Click to collapse
i werent :3

soft bricked. need 13.3.2.2 build prop
can someone please upload their 13.3.2.2 build.prop??
i guess in a moment of excitement, i've done a copy and paste of the build.prop from OP and over write it without backing up original build prop, after rooting with vroot now its soft bricked and wont turn on? im not even sure if i can recover it, i just need to reapply the build.prop

058515471 said:
i werent :3
Click to expand...
Click to collapse
oh. i replaced build.prop and my device was charging to update to 13.3.1.0 .. waiting.. thankyou
---------- Post added at 05:22 AM ---------- Previous post was at 05:16 AM ----------
jimyv said:
do anything here at your own risk
Click to expand...
Click to collapse
thank you. i'm waiting battery full to update

saphi95 said:
oh. i replaced build.prop and my device was charging to update to 13.3.1.0 .. waiting.. thankyou
---------- Post added at 05:22 AM ---------- Previous post was at 05:16 AM ----------
thank you. i'm waiting battery full to update
Click to expand...
Click to collapse
please dont reboot, you device may brick like i did

saphi95 said:
oh. i replaced build.prop and my device was charging to update to 13.3.1.0 .. waiting.. thankyou
---------- Post added at 05:22 AM ---------- Previous post was at 05:16 AM ----------
thank you. i'm waiting battery full to update
Click to expand...
Click to collapse
just need 30%

stapler85 said:
please dont reboot, you device may brick like i did
Click to expand...
Click to collapse
my device was rebooted normal and no problem.
---------- Post added at 05:35 AM ---------- Previous post was at 05:32 AM ----------
058515471 said:
just need 30%
Click to expand...
Click to collapse
yes. i have edited

stapler85 said:
can someone please upload their 13.3.2.2 build.prop??
i guess in a moment of excitement, i've done a copy and paste of the build.prop from OP and over write it without backing up original build prop, after rooting with vroot now its soft bricked and wont turn on? im not even sure if i can recover it, i just need to reapply the build.prop
Click to expand...
Click to collapse
here is build.prop from original 13.3.2.2 bin file.
p/s: did you root with vroot after edit the build.prop?

I got the kdz for lg g pad 7.0 v410

i have my ways lol this has been tested by me im not a professional or anything so im not gonna explain how to downgrade but all you need is
The Kdz of course : http://www.mediafire.com/download/2433xqabj1k8b8d/V41007h_0.kdz
And LG Flash Tool 2014
i strongly recommend that if you dont know what your doing then dont bother messing with this but also this is pretty easy and only took me about 15-20 minutes to do lol if you need any help pm me on here
And yes this is 4.4.2 i dowgraded from 5.0.2 to 4.4.2

looks like its working for me, in process of rooting now

dopekid313 said:
i have my ways lol this has been tested by me im not a professional or anything so im not gonna explain how to downgrade but all you need is
The Kdz of course : http://www.mediafire.com/download/2433xqabj1k8b8d/V41007h_0.kdz
And LG Flash Tool 2014
i strongly recommend that if you dont know what your doing then dont bother messing with this but also this is pretty easy and only took me about 15-20 minutes to do lol if you need any help pm me on here
And yes this is 4.4.2 i dowgraded from 5.0.2 to 4.4.2
Click to expand...
Click to collapse
Very nice sir! It's about time this leaked! I'd hit thanks more than once if it would let me.
I've never needed it, but always been just a little cautious with this little tablet due to not being able to do a full firmware restore myself.
You should be getting a flood of praise from all the folks who took the lollipop OTA and lost the ability to root and run bumped boot images. :good:

I recommend using timmytim v410 stock rom after downgrading with the kdz because the kdz is simply a test kdz lol so just Google : V410 Stock Rom

Password
Mine asked me for a pin or password to decrypt. What did I do wrong?

drumm3rb0y said:
Mine asked me for a pin or password to decrypt. What did I do wrong?
Click to expand...
Click to collapse
Is your tablet encrypted? You can check by going to settings then security and at the top it should say decrypt..(Or if it's not encrypted then it it will say encrypt) if it saids encrypt then i dont kno what else you can do maybe try reset your tablet or if it saids decrypt simply decrypt it and enter the pin if you forgot it you can probably try resetting your tablet i dont kno if that'll work or not but it should

dopekid313 said:
Is your tablet encrypted? You can check by going to settings then security and at the top it should say decrypt..(Or if it's not encrypted then it it will say encrypt) if it saids encrypt then i dont kno what else you can do maybe try reset your tablet or if it saids decrypt simply decrypt it and enter the pin if you forgot it you can probably try resetting your tablet i dont kno if that'll work or not but it should
Click to expand...
Click to collapse
I think I flashed with the wrong settings selected in the flash tool so I'm flashing again. If that doesn't work then I don't know. I'm coming from cyanogen back down
---------- Post added at 11:19 PM ---------- Previous post was at 11:07 PM ----------
So I don't know what's wrong. It loads and makes the AT&T sound and then next thing I get is a white screen asking me to enter a password or pin. I have never set a password or pin on here for my tablet so I don't know what's up

drumm3rb0y said:
I think I flashed with the wrong settings selected in the flash tool so I'm flashing again. If that doesn't work then I don't know. I'm coming from cyanogen back down
---------- Post added at 11:19 PM ---------- Previous post was at 11:07 PM ----------
So I don't know what's wrong. It loads and makes the AT&T sound and then next thing I get is a white screen asking me to enter a password or pin. I have never set a password or pin on here for my tablet so I don't know what's up
Click to expand...
Click to collapse
Did you use cse flash? With the lg flash tool?

I used normal flash. Should I have used cse? I've flashed before using the old lg flash tools for my phone with a tot file and dll. I tried looking it up and what I found was for the 400.

drumm3rb0y said:
I used normal flash. Should I have used cse? I've flashed before using the old lg flash tools for my phone with a tot file and dll. I tried looking it up and what I found was for the 400.
Click to expand...
Click to collapse
You must use cse bro

So for type cdma and phone mode emergency and after I selected the kdz the cse flash? Sorry for the dumb questions. Like I said I'm used to the older lg flash tools. Just very happy to have this file finally

drumm3rb0y said:
So for type cdma and phone mode emergency and after I selected the kdz the cse flash? Sorry for the dumb questions. Like I said I'm used to the older lg flash tools. Just very happy to have this file finally
Click to expand...
Click to collapse
Put it in download mode then plug it in then open the lg flash tool 2014 and leave everything as is then put the file in the directory then click cse flash then leave the language and stuff as is then just hit start and let everything do its thing sorry if I wasn't too specific but you should be able to figure out out with the details I gave you

Alright for it to load. Just have userdebug in red in the bottom right corner. Feel like I have still done something wrong

drumm3rb0y said:
Alright for it to load. Just have userdebug in red in the bottom right corner. Feel like I have still done something wrong
Click to expand...
Click to collapse
No you did it right its suppose to say that because it's a test kdz lol just root and flash timmytim stock rom

Last question. If I try the software update feature it should connect to the AT&T server and download them?

drumm3rb0y said:
Last question. If I try the software update feature it should connect to the AT&T server and download them?
Click to expand...
Click to collapse
Yeah of course

Got this error [emoji15]

Mervingio said:
Got this error [emoji15]
Click to expand...
Click to collapse
Did you put the phone in download mode before you started?

dopekid313 said:
Did you put the phone in download mode before you started?
Click to expand...
Click to collapse
Yes

Mervingio said:
Yes
Click to expand...
Click to collapse
And did cse flash?

//SM-J727P 2017\\ **Stock Odin J727PVPU1AQB9**

I couldn't find the correct thread to upload this, its a newer model of the J700P it could be from Sprint or Boostmobile either way here is the stock odin firmware i seen it in the Samsung kitchen so why not share it
This is Nougat firmware
AP_J727PVPU1AQB9_REPAIR_user_low_ship_MULTI_CERT_meta.tar.md5
BL_J727PVPU1AQB9_REPAIR_user_low_ship_MULTI_CERT.tar.md5
CP_J727PVPU1AQB9_REPAIR_user_low_ship_MULTI_CERT.tar.md5
CSC_SPT_J727PSPT1AQB9_REPAIR_user_low_ship_MULTI_CERT.tar.md5
https://www.androidfilehost.com/?fid=745425885120715469
Note:
This is either for Sprint or Boostmobile

Has anyone used this???
Sent from my SM-J727P using XDA-Developers Legacy app

JeepinxJosh said:
Has anyone used this???
Sent from my SM-J727P using XDA-Developers Legacy app
Click to expand...
Click to collapse
yes, quite afew times

will this work for Virgin mobile as well? I haven 't had a need yet...but knowing meeee...eventually.

Worked for my VM version of the phone. I think the phone sets itself from the network(Sprint, Boost, Virgin) when you activate it.

Very well ,Confirmed Works on boost mobile only method. helps me get off or bypass screen massage Blocked by FRP ,flashed with Odin thanks

Thank you very much! Also for the confirmation it works..... (i did hit the thanks button)
Downloading now,....... Just got this device due to a insurance claim so this is a completelt new phone to me and I really want to either start or add to one specific form till we get a complete spot on the fourms.... Any way my ideal or a good ideal for us is to add everthing that is confirmed working as on today and add it to one fourm and reserve like 10 entrys for specific problems and the solutions. Or just in a easy format so everything is not so confusing till we get our device a Fourm started instead of a thread thats confusing and hard to follow.... Anyone with me???? Its a new device and we need development so bad.. im stuck in a bootloop as of now and cant find the info to help me and its so aggervating.... someone will have to maintain it of course
---------- Post added at 09:01 PM ---------- Previous post was at 08:33 PM ----------
quick question...... downloaded the stock firmware but not sure about something....
do I add every file to odin or just the AP file??? or what? cause im use to just flashing in the AP spot in odin. Do I just load the AP REPAIR file i downloaded in the zip file? or do I add all files to odin??? Im alil confused.... PLEASE AND THANK YOU FOR THE HELP
just never really had to flash any other files but the AP slot....
Easy instruction would be very helpfull please
UPDATE UPDATE
I just went ahead and added all dled files in the folder to Odin and everythings good! Thanks again
FLASH ALL FILES

still getting error
XxTeXx07xX said:
Thank you very much! Also for the confirmation it works..... (i did hit the thanks button)
Downloading now,....... Just got this device due to a insurance claim so this is a completelt new phone to me and I really want to either start or add to one specific form till we get a complete spot on the fourms.... Any way my ideal or a good ideal for us is to add everthing that is confirmed working as on today and add it to one fourm and reserve like 10 entrys for specific problems and the solutions. Or just in a easy format so everything is not so confusing till we get our device a Fourm started instead of a thread thats confusing and hard to follow.... Anyone with me???? Its a new device and we need development so bad.. im stuck in a bootloop as of now and cant find the info to help me and its so aggervating.... someone will have to maintain it of course
---------- Post added at 09:01 PM ---------- Previous post was at 08:33 PM ----------
quick question...... downloaded the stock firmware but not sure about something....
do I add every file to odin or just the AP file??? or what? cause im use to just flashing in the AP spot in odin. Do I just load the AP REPAIR file i downloaded in the zip file? or do I add all files to odin??? Im alil confused.... PLEASE AND THANK YOU FOR THE HELP
just never really had to flash any other files but the AP slot....
Easy instruction would be very helpfull please
UPDATE UPDATE
I just went ahead and added all dled files in the folder to Odin and everythings good! Thanks again
FLASH ALL FILES
Click to expand...
Click to collapse
OK, so i flashed all 4 files in odin with my Boost mobile samsung galaxy SM-J727P and im still getting an error...im stuck in boot loop as well.someone please help. thanks

Does anyone knows if it's possible to unlock it with Z3X?

The extra csc file or the other so file named home-ap
AtlasTheGod said:
OK, so i flashed all 4 files in odin with my Boost mobile samsung galaxy SM-J727P and im still getting an error...im stuck in boot loop as well.someone please help. thanks
Click to expand...
Click to collapse
Flash the home ap file I believe instead....
You see the file?
UPDATE UPDATE
I just went ahead and added all dled files in the folder to Odin and everythings good! Thanks again
FLASH ALL FILES

I have followed all steps. I am using the J727p for boost. It turned on loaded up normally for me then when I restarted the phone it is now stuck in a boot load it gets to the Samsung screen then shuts off and repeats.

XxTeXx07xX said:
Flash the home ap file I believe instead....
You see the file?
UPDATE UPDATE
I just went ahead and added all dled files in the folder to Odin and everythings good! Thanks again
FLASH ALL FILES
Click to expand...
Click to collapse
What build were you on when flashed it ???
If you were on J727PVPU2AQI3 YOUR STUCK TILL YOU GET THE NEW FIRMWARE FILE !!

JUSMEJOSE said:
I couldn't find the correct thread to upload this, its a newer model of the J700P it could be from Sprint or Boostmobile either way here is the stock odin firmware i seen it in the Samsung kitchen so why not share it
This is Nougat firmware
AP_J727PVPU1AQB9_REPAIR_user_low_ship_MULTI_CERT_meta.tar.md5
BL_J727PVPU1AQB9_REPAIR_user_low_ship_MULTI_CERT.tar.md5
CP_J727PVPU1AQB9_REPAIR_user_low_ship_MULTI_CERT.tar.md5
CSC_SPT_J727PSPT1AQB9_REPAIR_user_low_ship_MULTI_CERT.tar.md5
https://www.androidfilehost.com/?fid=745425885120715469
Note:
This is either for Sprint or Boostmobile
Click to expand...
Click to collapse
this fixed my blinking:
rpmb provisioned ...pink
rpmb fuse: 1 ...yellow
recovery booting ...blue

This does not work. I've tried it multiple times on multiple versions of Odin. This will not work if you use Boost Mobile. It either fails, hangs at flashing boot.img, or hangs at SetupConnection.

Galaxy J727P
spc_hicks09 said:
This does not work. I've tried it multiple times on multiple versions of Odin. This will not work if you use Boost Mobile. It either fails, hangs at flashing boot.img, or hangs at SetupConnection.
Click to expand...
Click to collapse
Here try these four file ! Don't use the fifth file if your not on Sprint it not needed in most cases !
https://www.androidfilehost.com/?w=files&flid=244089

peter couniaz said:
Here try these four file ! Don't use the fifth file if your not on Sprint it not needed in most cases !
https://www.androidfilehost.com/?w=files&flid=244089
Click to expand...
Click to collapse
Thank you, I will try them now and see what happens.

XxTeXx07xX said:
Flash the home ap file I believe instead....
You see the file?
UPDATE UPDATE
I just went ahead and added all dled files in the folder to Odin and everythings good! Thanks again
FLASH ALL FILES
Click to expand...
Click to collapse
Anyone have any luck with these? I'd really like to bypass frp on this

spc_hicks09 said:
Thank you, I will try them now and see what happens.
Click to expand...
Click to collapse
So do you have any luck? trying to get stock firmware on my device to bypass FRP boot.img error

Almost bricked...and then this post saved my friggin day!
peter couniaz said:
Here try these four file ! Don't use the fifth file if your not on Sprint it not needed in most cases !
This works to get you back to stock from bootloop. I tried my hand at rooting this little SOB (TWRP,Magisk) and tripped the Knox counter bc I forgot to wipe it. Reboot came up with "Validation Failure" and I was stuck. I stumbled over this post and with nothing to lose other than $130.
First piece of advice...Use Odin 3.12.3 ONLY!! I tried the latest version and it didn't work. Download the files, place them in the appropriate boxes and flash. reboot into recovery, wipe the cache/data and you should be good. Mine took quite a while after hanging on the Boost mobile splash screen, but about 3 reboots later, it brought me to the configuration screen. It's up, running and I even got the OTA software update, but then again, it is stock.
Click to expand...
Click to collapse

J727P
ListlessSpectre said:
peter couniaz said:
Here try these four file ! Don't use the fifth file if your not on Sprint it not needed in most cases !
This works to get you back to stock from bootloop. I tried my hand at rooting this little SOB (TWRP,Magisk) and tripped the Knox counter bc I forgot to wipe it. Reboot came up with "Validation Failure" and I was stuck. I stumbled over this post and with nothing to lose other than $130.
First piece of advice...Use Odin 3.12.3 ONLY!! I tried the latest version and it didn't work. Download the files, place them in the appropriate boxes and flash. reboot into recovery, wipe the cache/data and you should be good. Mine took quite a while after hanging on the Boost mobile splash screen, but about 3 reboots later, it brought me to the configuration screen. It's up, running and I even got the OTA software update, but then again, it is stock.
Click to expand...
Click to collapse
You may want to look at this link if you haven't already the last Rom there is my daily drive but you should read threw it let me know if you need any help !
https://forum.xda-developers.com/galaxy-j7/development/updated-tweaked-deodexed-rom-galaxy-t3773219
Click to expand...
Click to collapse

t-mobile v20 h91810p twrp installation help!

I know I need to rollback my version to 10k, however I am stymied by antirollback problems using lgup! I could really use some assistance on getting this to rollback to 10k. I have been reading the forums for 2 days now, hundreds of posts, and nothing works. I cant use the dirty cow method of installing twrp as it was patched and my phone auto downloaded the stupid update... Any help would be much appreciated.
Thanks Zernon916

You can't. You're stuck on P. You said it yourself it is anti roll back.

Gytole said:
You can't. You're stuck on P. You said it yourself it is anti roll back.
Click to expand...
Click to collapse
So no one has rooted it yet?

No

Hopefully it comes soon.

I might have a solution. If you are willing to try.. Let me know.

Walter.White said:
I might have a solution. If you are willing to try.. Let me know.
Click to expand...
Click to collapse
Lets hear it ehhe

We chatted via hangout and his process went through easily . but when i flashed twrp through lg up . it just did a factory reset rather than booting to twrp

Walter.White said:
I might have a solution. If you are willing to try.. Let me know.
Click to expand...
Click to collapse
let me knoe I'm down to test it out for you
---------- Post added at 11:27 PM ---------- Previous post was at 11:26 PM ----------
popwar said:
We chatted via hangout and his process went through easily . but when i flashed twrp through lg up . it just did a factory reset rather than booting to twrp
Click to expand...
Click to collapse
let me know what you guys did as I could try looking into it

dudeawsome said:
let me knoe I'm down to test it out for you
---------- Post added at 11:27 PM ---------- Previous post was at 11:26 PM ----------
let me know what you guys did as I could try looking into it
Click to expand...
Click to collapse
Basically just verified my bootloader was unlocked. And used the patched LG UP to Partition flash twrp recovery . got the 2 screens selecting Yes on both as normal with twrp but it just rebooted to android with a fdr

popwar said:
Basically just verified my bootloader was unlocked. And used the patched LG UP to Partition flash twrp recovery . got the 2 screens selecting Yes on both as normal with twrp but it just rebooted to android with a fdr
Click to expand...
Click to collapse
so essentially it never actually flashed twrp

dudeawsome said:
so essentially it never actually flashed twrp
Click to expand...
Click to collapse
Right. Upon reboot after hitting start in LGUP, it went to the stock android firmware upgrade screen, said 100% and rebooted . Did a battery pull when the LG logo came up. Put it back in and used recovery button combo (Volume - and Power). Said yes 2 times and it booted to android instead of twrp.

popwar said:
Right. Upon reboot after hitting start in LGUP, it went to the stock android firmware upgrade screen, said 100% and rebooted . Did a battery pull when the LG logo came up. Put it back in and used recovery button combo (Volume - and Power). Said yes 2 times and it booted to android instead of twrp.
Click to expand...
Click to collapse
I tried this method out but when i press start the lgup just crashes

dudeawsome said:
I tried this method out but when i press start the lgup just crashes
Click to expand...
Click to collapse
Did you select the Partition DL option? Might need the common dll to be patched as well. I can send you the 2 files i replaced in the lgup directory

popwar said:
Did you select the Partition DL option? Might need the common dll to be patched as well. I can send you the 2 files i replaced in the lgup directory
Click to expand...
Click to collapse
yeah send it over

popwar said:
Did you select the Partition DL option? Might need the common dll to be patched as well. I can send you the 2 files i replaced in the lgup directory
Click to expand...
Click to collapse
Credit goes to Walter.White from this forum . I am just relaying the info that he provided me . here is the link to the files i used . ge.tt/3aI5xDm2 . just copy n paste in address bar . i renamed my original files .bak in case .

popwar said:
Credit goes to Walter.White from this forum . I am just relaying the info that he provided me . here is the link to the files i used . ge.tt/3aI5xDm2 . just copy n paste in address bar . i renamed my original files .bak in case .
Click to expand...
Click to collapse
didnt work sadly

dudeawsome said:
didnt work sadly
Click to expand...
Click to collapse
The link?

popwar said:
The link?
Click to expand...
Click to collapse
no link worked but it didnt flash

dudeawsome said:
no link worked but it didnt flash
Click to expand...
Click to collapse
What does it do/say

Successfull roll-back from oreo Beta back to Nouget

After using the manual Oreo update 2 weeks, Flashing several treble roms. Most with little to no trouble. I ended up with no more 4g or LTE signals on my L24 USA model Honor 7X.
So I took the plunge and tried to roll-back from beta oreo back to EMUI 5.
It worked. It took only few minutes to complete. I wrote down the steps, it was 22 steps.
If you do attempt this too, be advised I do not know what possible things could go wrong, and you do so at your own risk.
I will likely refine the document if after reading it many times I find it too confusing.
You will need backed up images of your original firmware. AND the original /data/hw_init folder
If / when huawei finally release a "full-ota" for your device/ region . this will not be needed, but until then here is a method to return.
Thanks are needed here:
pro-team-mt for firmware
@Askuccio_DROID no-check recovery
@Sudeep Duhoon twrp recovery , and backup instructions
*********************************************************************************************
*********************************************************************************************
*********************************************************************************************
*********************************************************************************************
*********************************************************************************************
*********************************************************************************************
Merged into twrp flash file in new thread.
https://forum.xda-developers.com/honor-7x/how-to/guide-honor-7x-flash-oreo-update-t3781649
*********************************************************************************************
*********************************************************************************************

Nice
I bet many users will follow this tutorial in the next days....
I was worried cause of the partition changes on Oreo that the downgrade would be very trick... But you got'it right
Still, wont work for me... (Stuck on FRP)
On About the Phone, is the model correct? Isn't it BND-AL10? (Since you used that model's image)
Great work.
Any tips for me:
- Boot phone
Using the SD card, is there any trick to prevent the phone to reboot? Any app? Any other trick?
- UPDATE.APP
All the files that i tried, NON make it passed the 5%...
This is the only way in that i have to the device...
-Relock Bootloader (?)
Just can't do it via Fastboot... Is there any other way?
Keep the good work

RSGI said:
Nice
I bet many users will follow this tutorial in the next days....
I was worried cause of the partition changes on Oreo that the downgrade would be very trick... But you got'it right
Still, wont work for me... (Stuck on FRP)
On About the Phone, is the model correct? Isn't it BND-AL10? (Since you used that model's image)
Click to expand...
Click to collapse
I have BND-L24.
I used AL-10 , basically at random. Firmware finder showed they had a roll-back fukk-ota.
My about phone screen shows correct . Even when I booted the China firmware.
Great work.
Any tips for me:
- Boot phone
Using the SD card, is there any trick to prevent the phone to reboot? Any app? Any other trick?
- UPDATE.APP
All the files that i tried, NON make it passed the 5%...
This is the only way in that i have to the device...
Click to expand...
Click to collapse
I'm pretty sure the reading till 5% screen it just the default screen while it is searching for the update file.
-Relock Bootloader (?)
Just can't do it via Fastboot... Is there any other way?
Keep the good work
Click to expand...
Click to collapse
Still do not of other method to release frp lock.

Pls give me link for BND-AL10 downgrade to nougat I tried fullota zip files , twrp stopped after no check recovery and throws error unable to find hw , but all files in the hwota8folder

ganeshram456 said:
Pls give me link for BND-AL10 downgrade to nougat I tried fullota zip files , twrp stopped after no check recovery and throws error unable to find hw , but all files in the hwota8folder
Click to expand...
Click to collapse
The file is already linked on the directions.
These directions do not tell you to use the hwota-auto-update.zip. if you are following those direction, kindly ask in that thread

Big thanks for the hint to use "adb reboot recovery" instead of TWRP's reboot button - I've been pondering for hours over what I've done wrong, and turns out this was it.

mrmazak said:
After using the manual Oreo update 2 weeks, Flashing several treble roms. Most with little to no trouble. I ended up with no more 4g or LTE signals on my L24 USA model Honor 7X.
So I took the plunge and tried to roll-back from beta oreo back to EMUI 5.
It worked. It took only few minutes to complete. I wrote down the steps, it was 22 steps.
If you do attempt this too, be advised I do not know what possible things could go wrong, and you do so at your own risk.
I will likely refine the document if after reading it many times I find it too confusing.
You will need backed up images of your original firmware. AND the original /data/hw_init folder
If / when huawei finally release a "full-ota" for your device/ region . this will not be needed, but until then here is a method to return.
Thanks are needed here:
pro-team-mt for firmware
@Askuccio_DROID no-check recovery
@Sudeep Duhoon twrp recovery , and backup instructions
*********************************************************************************************
*********************************************************************************************
*********************************************************************************************
*********************************************************************************************
*********************************************************************************************
*********************************************************************************************
Merged into twrp flash file in new thread.
https://forum.xda-developers.com/honor-7x/how-to/guide-honor-7x-flash-oreo-update-t3781649
*********************************************************************************************
*********************************************************************************************
Click to expand...
Click to collapse
Can I try this on locked bootloader... Oreo??

Heartstoler1991 said:
Can I try this on locked bootloader... Oreo??
Click to expand...
Click to collapse
No, it is based on using a modified stock-ish recovery, which needs unlocked bootloader to flash.
And besides, this was a hackish method to get me by before there was a full OTA file for roll back.
I think your best bet on locked bootloader will be the host file mod and python server method hackintosh has talked about. He calls it erecovery. And it is intended to be done with the stock erecovery.

mrmazak said:
No, it is based on using a modified stock-ish recovery, which needs unlocked bootloader to flash.
And besides, this was a hackish method to get me by before there was a full OTA file for roll back.
I think your best bet on locked bootloader will be the host file mod and python server method hackintosh has talked about. He calls it erecovery. And it is intended to be done with the stock erecovery.
Click to expand...
Click to collapse
Can u give me the link plz... Tnx in advance

Heartstoler1991 said:
Can u give me the link plz... Tnx in advance
Click to expand...
Click to collapse
Oh yeah. Here
https://github.com/penn5/erecoverer

mrmazak said:
Oh yeah. Here
https://github.com/penn5/erecoverer
Click to expand...
Click to collapse
Bro. I read that one.. It looks little beat critical ... And I don't have Internet connection on my pc...
Can u suggest me any other method to downgrade ..?? I tried Hisuite also.. But it won't work for me.. There is no option "switch to other version"
---------- Post added at 04:59 AM ---------- Previous post was at 04:57 AM ----------
mrmazak said:
Oh yeah. Here
https://github.com/penn5/erecoverer
Click to expand...
Click to collapse
Bro. I read that one.. It looks little beat critical ... And I don't have Internet connection on my pc...
Can u suggest me any other method to downgrade ..?? I tried Hisuite also.. But it won't work for me.. There is no option "switch to other version"

mrmazak said:
Oh yeah. Here
https://github.com/penn5/erecoverer
Click to expand...
Click to collapse
Bro. I read that one.. It looks little beat critical ... And I don't have Internet connection on my pc...
Can u suggest me any other method to downgrade ..?? I tried Hisuite also.. But it won't work for me.. There is no option "switch to other version"

Heartstoler1991 said:
Can u give me the link plz... Tnx in advance
Click to expand...
Click to collapse
Hey I've posted a few posts around on one of these I got the SE on the latest firmware. I'd there a way to downgrade to earlier Oreo or nougat service rom without bootloader unlock. I bought the credits then found I was to high of firm Ware. I can't find straight answers any where I've spent all day downloading, and trying to update, flash whatever I can all ending in error. All bnd l34 I've got 344 it's files which fail at 5% I've never used one of the fancy heuweis before. Used to lg and Samsung. I'm no noob on flashing . Hisuite does not show rollback options... Like I said just can't find any straight answers. I'm stuck with this one either way but root would be nice
---------- Post added at 09:36 PM ---------- Previous post was at 09:30 PM ----------
mrmazak said:
Oh yeah. Here
https://github.com/penn5/erecoverer
Click to expand...
Click to collapse
My post was actually meant for you sorry