BONSOIR . I HAVE A BIG PROBLEM WHEN I TRIED TO UPDATE MY NOTE 3 WITH UNITED ARAB EMIRATES 4.3 FIRWARE TO ANOTHER FIRWARE 5.0 KSA
PDA : N9005XXUGBOEA
CSC : N9005OJVGBOE4
WITH ODIN 3.9
IN BOOTLODER A ERROR MESSAGE Invalid ext4 Image
PLEASE HELP ME TO RE ACTIV MY DEVICE
Have you tried connecting the phone to Kies or Smartswitch and performing a recovery?
I am not sure what you were trying to do, but in Odin to flash a ROM you need to put the file under AP tab (which is formerly known as PDA for older versions of Odin) to flash the ROM successfully. Under Bootloader you should only select Bootloader file, if you have it separately, same goes for CSC and CP (CP is Modem by the way).
PIT file!!!
7oussa said:
BONSOIR . I HAVE A BIG PROBLEM WHEN I TRIED TO UPDATE MY NOTE 3 WITH UNITED ARAB EMIRATES 4.3 FIRWARE TO ANOTHER FIRWARE 5.0 KSA
PDA : N9005XXUGBOEA
CSC : N9005OJVGBOE4
WITH ODIN 3.9
IN BOOTLODER A ERROR MESSAGE Invalid ext4 Image
PLEASE HELP ME TO RE ACTIV MY DEVICE
Click to expand...
Click to collapse
this is what you need most probably!
http://forum.xda-developers.com/showpost.php?p=62833944&postcount=2
nijom said:
this is what you need most probably!
http://forum.xda-developers.com/showpost.php?p=62833944&postcount=2
Click to expand...
Click to collapse
I have a Note 3 Originally from KSA.
Some days before it's WiFi and Bluetooth didn't turning on. It stayed grey when trying to turning on.
I have Factory reset twice.
Then Flashed. UAE lollipop, Nordic Countries Lollipop. Egypt Lollipop.
But issue not solved.
Tried to Flash Hong Kong Nad Taiwan Lollipop. Both failed on EXT4 even Flashing with a pit file.
Any Idea.
Sent from My LG G Flex LG-F340K Stock KitKat V20D on LTE Network using XDA Free Mobile app
Related
Dear Friends,
I'm using N9005 on this N9005XXUBMJ1 firmware and trying to flash to the newer firmware from other region N9005ZHUDMJ8.
However, I've been getting an error "ext4 img" in ODIN and now my phone cannot boot and stuck on the download mode. So I decided to flash it back to its previous version N9005XXUBMJ1 but still not success and stuck on the same loop.
I have tried doing the emergency recovery from KIES, but having another error "[about] Fused 2 > Binary 1" (on the following screenshot)
Can anybody help me on this problem? I really like the phone and I really need it back.
Thank you
I just solved the problem by myself, it seems that there is a problem with the bootloader on the MJ8 version or something, so I use the MJ6 BTU firmware instead and it works. phewww
Having the same problem...which firmware is MJ6 BTU?
TIA
SoKoOLz said:
I just solved the problem by myself, it seems that there is a problem with the bootloader on the MJ8 version or something, so I use the MJ6 BTU firmware instead and it works. phewww
Click to expand...
Click to collapse
I think MJ8 is from Hongkong 16GB Model.
Either way the knox warranty void has been triggered. You also have the new bootloader meaning recovery through Kies won't work until your country gets the new bootloader stock.. You are essentially stuck using another countries rom now until your coutry/carrier upgrades their firmware with the new bootloader...
Forget Kies recovery working if things go wrong...
doclucas said:
Having the same problem...which firmware is MJ6 BTU?
TIA
Click to expand...
Click to collapse
To answer my own question, this is the BTU (United Kingdom) firmware file that saved my otherwise bricked phone which got the MJ8 HK bootloader:
N9005XXUDMJ6_N9005OXADMJ4_BTU.zip
http://www.hotfile.com/dl/252753467/b379b8f/N9005XXUDMJ6_N9005OXADMJ4_BTU.zip.html
doclucas said:
To answer my own question, this is the BTU (United Kingdom) firmware file that saved my otherwise bricked phone which got the MJ8 HK bootloader:
N9005XXUDMJ6_N9005OXADMJ4_BTU.zip
http://www.hotfile.com/dl/252753467/b379b8f/N9005XXUDMJ6_N9005OXADMJ4_BTU.zip.html
Click to expand...
Click to collapse
I currently have a hong kong model 16gb (MJ8) version.
is it possible to flash BTU onto this device?
jeezy85 said:
I currently have a hong kong model 16gb (MJ8) version.
is it possible to flash BTU onto this device?
Click to expand...
Click to collapse
It should be possible, but might fail, so in any case make sure you download both the latest Hong Kong firmware (MK1) and the MJ7 BTU firmware just in case it fails you can flash MK1 on top and your device supposed to work fine.
Hellow guys,
Please help me out i bought note 3 N9005 here in oman having uae firmware which had 4.3. Due to delay of firmware i flashed my phone using slovakia firmware 4.4.2 and right now am having issues with disconnection and slow internet. i tried to flash my modem using mj7 file of my previously firmware but odin cant flash it. i tried everything i untick odin not to reboot and i repeat the process over and over with no success.
Please help out
Michael
khalfansalmy said:
Hellow guys,
Please help me out i bought note 3 N9005 here in oman having uae firmware which had 4.3. Due to delay of firmware i flashed my phone using slovakia firmware 4.4.2 and right now am having issues with disconnection and slow internet. i tried to flash my modem using mj7 file of my previously firmware but odin cant flash it. i tried everything i untick odin not to reboot and i repeat the process over and over with no success.
Please help out
Michael
Click to expand...
Click to collapse
@khalfansalmy you are in the wrong forum this is the one you want http://forum.xda-developers.com/galaxy-note-3 i will contact a mod and have this moved
Hellow guys,
Please help me out i bought note 3 N9005 here in oman having uae firmware which had 4.3. Due to delay of firmware i flashed my phone using slovakia firmware 4.4.2 and right now am having issues with disconnection and slow internet. i tried to flash my modem using mj7 file of my previously firmware but odin cant flash it. i tried everything i untick odin not to reboot and i repeat the process over and over with no success.
Please help out
Michael
Hello there,
I have downloaded the official version of GT-i9500 Lollipop 5.0.1 ROM , Russia release , from Sammobile. Its a typical odin version single tar file. If I have install this on my Indian Galaxy S4 (GT-i9500) , by pointing the Odin (3.09) AP/PDA to the corresponding tar file alone , will it succeed ?
I have seen a couple of threads showing installation of russian version on other phones, but in that all, the zip file contains , 4 tar file for each section , pda, ser and so on. So I doubted if I proceed with only pointing the PDA and rest 3 section as blank on my Indian versino of S4, will there be any problem ? As I am using it as a daily driver, I dont want to experiment and see the result.
Please comment
Cheers,
KiK
KiranNokia said:
Hello there,
I have downloaded the official version of GT-i9500 Lollipop 5.0.1 ROM , Russia release , from Sammobile. Its a typical odin version single tar file. If I have install this on my Indian Galaxy S4 (GT-i9500) , by pointing the Odin (3.09) AP/PDA to the corresponding tar file alone , will it succeed ?
I have seen a couple of threads showing installation of russian version on other phones, but in that all, the zip file contains , 4 tar file for each section , pda, ser and so on. So I doubted if I proceed with only pointing the PDA and rest 3 section as blank on my Indian versino of S4, will there be any problem ? As I am using it as a daily driver, I dont want to experiment and see the result.
Please comment
Cheers,
KiK
Click to expand...
Click to collapse
Hi mate ,
i would follow instructions as they are given in the official release....
Model: GT-I9500
Model name: GALAXY S4
Country: Russia
Version: Android 5.0.1
Changelist: 3943544
Build date: Tue, 20 Jan 2015 12:49:42 +0000
Product Code: SER
PDA: I9500XXUHOA7
CSC: I9500SERHOA7
MODEM: I9500XXUHOA7
Instructions
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
BACKUP before you do anything , EFS included
Hey ya... Alright, so you mean to say not to bother about the other 3 columns only to fill with AP/PDA with the downloaded tar file, So have you tried this before ? I know it works for same country ROMs , but not sure about a different country, so wanted the confirmation. If someone tried and found it working then I will go for it.
Cheers,
KiK
Alright, Good to go with Lollipop Russia 5.0.1
Hey Folks, I tried myself upgrading my GS4 with the official lollipop 5.0.1 Russia release on my India Phone, and it works fine. Just need to download the tar file from sammobile and point that in AP/PDA section of Odin 3.09, and start it off, Done ! It feel refreshing the new look and performance after the upgrade
Cheers,
KiK
General
phone Galaxy note 3 SM-N9005 (on Australia net work)
Device: hlte-product name: hltexx made in Vietnam
knox warranty void
CSC code
original csc code: XSP
rest of the info blank
Firmware
bootloader version: N9005XXUGBOK4
PDA version: N9005XXUGBOK4
CSC version Blank( not Mentioned)
Baseband version blank
Latest firmware
N9005DXUGBOK3/N9005OLBGBOK3/N9005DXUGBOK3
Kernel version
3.4.0-4540543 [email protected]#1
32 bit
android 5.0
build number:LRX21V.N9005XXUGBOK4
flashed two diffrent custom roms and two stock successfully but baseband, csc and imei unknown
stock roms for Australia and hong kong failed
any Advice to recover baseband and imei will be highly appreciated
Did you try flashing the original ROM that came with the phone from sammobile.com?
Baseband flash via Odin from the modem thread.
No IMEI restore backed up EFS folder.
No backup see multiple identical threads modem,,EFS
Sent from my SM-N920C using XDA-Developers mobile app
audit13 said:
Did you try flashing the original ROM that came with the phone from sammobile.com?
Click to expand...
Click to collapse
Hi Audit 13
thanks for the advice
original rom failed to flash
regards
What error did you get? You tried different USB cables and USB ports to flash via Odin?
audit13 said:
What error did you get? You tried different USB cables and USB ports to flash via Odin?
Click to expand...
Click to collapse
yes i have tried different cables and ports failed 0success/ 1failed
these stock rom failed XSA N9005XXUGBOK4, OPSN9005XXUGBOK4 and a few others
these passed but did nit fix the problem CM13, SOKP L-5.1.1 and stock rom from egypt which is the smmalest stock rom N9005XXUGDL8-OJVGBOL1EGY
regards
Desi jatt
It requires the EFS folder to be restored at a service centre .