I'm having issue with my note 4 N910C ,I need to root my phone for root or flashing twrp recovery reactivation lock must be untick when I try to untick it doesn't get turn off I also flash the stock rom after flashing a rom, I can't turn off the reactivation lock of my phone. I uncheck it, but when I enter download or recovery mode, it is still turned on and this doesn't link to any samsung id account but show activation lock on in download mode even I flash stock rom and done hard format but still got this issue
help would be appreciated
Thanks an advance
youtube.com/watch?v=U23TdbqJehA
Related
Reactivation Lock-out Solution (Re:"Custom binary blocked by reactivation lock")
I turned on reactivation lock, not realizing the repercussions. Upon rebooting my phone the first time after turning it on, I got the message saying "Custom binary blocked by reactivation lock". And I could not get past that initial screen. You should still have access to Download mode, which I did (Vol down + Home + Power).
So using Odin (v3.09), I flashed the newest firmware for my carrier using "AP" to select the file, and default Odin settings. (Specifically the tar file in the main .zip file: N900W8VLUBMJ4_N900W8OYABMJ4_N900W8VLUBMJ4_HOME.tar.md5) Again, it might be carrier specific, so only try flashing the one specific to your phone.
Everything booted up fine for me. :victory:
I immediately went into Security settings and de-selected Reactivation Lock option.
I then used Odin to reflash TWRP recovery.
I've since went back to flashing custom ROMs, with no problems.
I hope this helps. :good:
Custom binary blocked by reactivation lock.
This is the message I am getting after installing if I go to the TRWP boot (volume up, home and on/off button).
The phone is working normally 900F with stock kernel, Cf root and TWRP recovery, I want to install some of the aroma package but I can't install right now.
Thanks and greetings,
Erik.
Go to settings - System - Security and unchecked he reactivation lock option.
Thanks for the answer,
I have seen that solution on this site before, but I don't have a setting that is called reactivation lock option
Thanks and greetings,
Erik.
Hai all! Thank you for reading!
God knows how many hours I'm loosing around this stupid problem: I've a G900F @ lollipop 5.0, I poot in download mode, connect ODIN, all is ok. It uploads and phone says SECURE CHECK FAIL: recovery.
Yes, yes, I've USB debug turned on, and as well the Samsung Reactivation Lock is unchecked! I also tried to check it (need to register to samsung) to then uncheck it.
Somewhere I read to "enable OEM unlock" in settings, but I can't find this setting anywhere!
I can't install ANYTHING under boot loader, everytime I've a fail.
CURRENT BINARY: Samsung official
SYSTEM STATUS: official
REACTIVATION LOCK (KK): OFF
SECURE DOWNLOAD: ENABLE
UDC START
SECURE CHECK FAIL: recovery
I tried flash CWM, TWRP, different options, the phone simply doesn't want to accept the recovery!
What can I do? I'm really pissed off, I also tried to install TWRP from phone by rooting it, may applications around and all of them failed!
Help please, help me!! Thank you
help please, I can't understand why the phone behaves in such way!
booting in samsung recovery I tried also to wipe cache and data, then after reconfiguration tried again to flash with odin, nothing
can the problem be connected to THE missing RSA pop up where it ask to always allow this computer? I can't see that popup! Damn I'm becoming mad.. why so complicated!
may chances are that the firmware 3.4.0 inside has been modified/uploaded to avoid any update?
Go to cwm recovery mount and stored format data/media sdcard NOT extsdcard and try flash again tq.
thanks for answer, already did, the phone booted up and asked all the silly questions after first boot. Tried again after but nothing changed. I'm stuck in a big small issue..
I had CWM installed on my S5 and i enabled reactivation lock after that i booted into recovery mode and boom i got stuck there it wont boot. It is giving me an error CUSTOM BINARY BLOCKED BY REACTIVATION LOCK.
Now i cant boot to my homescreen :/ + i dont remember my build version what i remember is that it had android 5.0 and in build number there was something G900P. So which firmware should i download now? (I AM NOOB PARDON MY ENGLISH). Also is there any fix for this error message? Without flashing the whole device? I tried going into download mode and selecting restart from there but it didnt work for me. Thanks in advance.
Hi there,
I have a Samsung Galaxy Tab A6 (SM-T285) which I bought today. I followed this tutorial to install twrp, ultimately to root the device:
I can't even post links so sad. But the link was of **********.
Everything worked fine and I was able to boot and reboot fine. Until I signed in with my Google Account. After trying to reboot, I get a black screen with the Samsung logo and a text in red saying: Custom binary blocked by FRP Lock. I went back to the store and they advised me to install Samsung Smart Switch to try and restore. In the Smart Switch program I get an error saying that the device is not supported by Smart Switch.
I can get into download mode, not into any other mode. I can't get into recovery mode. The tablet doesn't start up at all. On the download mode it also says FRP Lock ON.
When I go back into ODIN and retry to install the from above TWRP image, it says operation failed.
Can anybody please advice? I am at a complete loss. Am I supposed to flash the original boot file? Where can I find that for my device? Will my tablet accept that, since ODIN didn't even want to flash my current TWRP image a second time?
P.S. I only read later that you are supposed to change the OEM setting. I didn't. Is that the cause of this issue, and if so, can I do something about it?
Thanks
Pro_Gamer368 said:
Hi there,
I have a Samsung Galaxy Tab A6 (SM-T285) which I bought today. I followed this tutorial to install twrp, ultimately to root the device:
I can't even post links so sad. But the link was of **********.
Everything worked fine and I was able to boot and reboot fine. Until I signed in with my Google Account. After trying to reboot, I get a black screen with the Samsung logo and a text in red saying: Custom binary blocked by FRP Lock. I went back to the store and they advised me to install Samsung Smart Switch to try and restore. In the Smart Switch program I get an error saying that the device is not supported by Smart Switch.
I can get into download mode, not into any other mode. I can't get into recovery mode. The tablet doesn't start up at all. On the download mode it also says FRP Lock ON.
When I go back into ODIN and retry to install the from above TWRP image, it says operation failed.
Can anybody please advice? I am at a complete loss. Am I supposed to flash the original boot file? Where can I find that for my device? Will my tablet accept that, since ODIN didn't even want to flash my current TWRP image a second time?
P.S. I only read later that you are supposed to change the OEM setting. I didn't. Is that the cause of this issue, and if so, can I do something about it?
Thanks
Click to expand...
Click to collapse
Reinstall stock rom
Change OEM setting in Developer Options
Then you install TWRP - Turn off auto reboot in TWRP
After ODIN install, manually reboot to recovery.
gcrutchr said:
Reinstall stock rom
Change OEM setting in Developer Options
Then you install TWRP - Turn off auto reboot in TWRP
After ODIN install, manually reboot to recovery.
Click to expand...
Click to collapse
wait......... do i off oem unlock or on it
Pro_Gamer368 said:
wait......... do i off oem unlock or on it
Click to expand...
Click to collapse
slide the button to the right
gcrutchr said:
slide the button to the right
Click to expand...
Click to collapse
thanks, you're a legend :good::good::good: