Database Users

[Q] HTC Tattoo not booting after creating a custom kernel and boot.img

Hello, I've tried to build a custom kernel base on the guide from: http://forum.xda-developers.com/showthread.php?t=622916
I'm running Ubuntu 10.04 and the rest is as in the guide. I've setup the environment, everything work, including the kernel build and boot.img.
Like I said, I've got no errors, but the newly created boot.img it's not booting my HTC Tatttoo, the phone starts and those do anything besides displaying the Tatttoo logo.
The build kernel is based on the kernel found at: http://dl4.htc.com/RomCode/Source_and_Binaries/click-656120.tar.gz and was build without any modification to the kernel config. I mean, I've got the config from my HTC, /proc/config.gz.
When into the kernel source zcat config.gz > .config
then make oldconfig and make.
Also wlan.ko was build without any problems too.
Does anyone know how to see whats going on, why its not booting? Or is there a way to disable all the "logos" so I can see the output of the kernel booting, just like on a normal PC?

[EXPERIMENTAL/TOOLS/GUIDE/ADV.] Toolchain gcc 4.6.3 Cygwin/Linux/OSX; kernel builds

The following contains binaries, and instructions for use of an experimental newer toolchain than those included in the android pre-built package.
This is provided to allow existing linux kernel developers experiment with the updated version of GCC (besides the complicated building instructions the code just has a small patch for a known issue with android and 4.6.* otherwise is directly from GNU (see build information below)
The packages I'm also providing to help developers current on windows (With cygwin but no other virtual environment) to start exploring android Linux kernel development for their devices. (In addition to a OSX toolchain for more advanced mac users)
due to the slight differences between kernels on different devices this How To is intended to be used for advanced users who can adjust for the differences required for the devices specific kernel.
I may add additional guides to this thread if I find a need for them.
[size=+1]Binary Toolchains[/size]
I have two versions of a GCC-4.6.3 toolchain
1) For x86 linux: toolchain-4.6.3.tar.bz2 (Sha1: c8c57aba6ad92e9acddf29ba8620ba880be09a81)
2) For Cygwin (windows): toolchain-4.6.3.cygwin.tar.bz2 (Sha1: 6947e1c1ba95195019f542eb8ba0708667b63eca)
3) For OSX (mac/darwin): toolchain-4.6.3.darwin.tar.bz2 (Sha1: 9a977f0672863fdd9501383a6ad1e30723281f68)
[size=-1]> The linux version was built via this script: http://pastebin.com/b2dZ8YtG (or in the included toolchain_notes.txt)
> The cygwin/darwin version uses the same source however has a slightly modified script (see the included toolchain_notes.txt for the updated script)[/size]
[size=+1]System Requirements[/size]
Note I have a 64bit debian linux box, and a 64bit version of WIndows7 Pro running cygwin, while I believe these binaries ought to be compatible with all x86 linux and cygwin installs these have not been tested by a wide number of people yet.
> Linux users: If you have a working android build environment likely no additional requirements are needed. In addition you must build any kernel/android utilities from a case sensitive filesystem or disk image.
> OSx users: the cygwin packages will give you an idea of what is required, please also see the README in the tar.bz2 about manually installing elf.h
> Cygwin users: as its unlikely you have compiled a kernel with cygwin up to this point you may wish to ensure the following packages are installed (as well as any cygwin recommends to be used with them):
vim
vim-common
make
cmake
lzop
gcc
gcc-core
gcc-g++
wget
git
git-compleation
libncurses-devel
python​
Cygwin users must also set their NTFS file partition to allow case sensitive files:
To do this open regedit and change:
HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\kernel\obcaseinsensitive
to 0
after this reboot and the NTFS kernel will allow cygwin to use case sensitive files (ie 'AbC' and 'aBc' as two different files)​
[size=+1]Advanced Kernel Building Guide[/size]
Since may devices are slightly different this can only be a high level kernel building guide
Please ask for any specific directions from the current kernel maintainer.
To most people who have built kernels before this will look familiar, the most important part is preparing your local environment to use the new toolchain,
1) If you have not already download the tar.bz2 above, (pick the one for the computer you are preparing to build kernels on)
2) extract the file (for the sake of this guide I will assume it is extracted into a ~/android directory)
ie on cygwin you might:
mkdir -p ~/android
cd ~/android
tar -xjvf toolchain-4.6.3.cygwin.tar.bz2
Note: steps one and two are just properly installing the toolchain, you will not need
to repeat them to build a different kernel.
2.b) OSX Only: check elf.h
open ~/android/toolchain-4.6.3/README in a text editor and check if elf.h is installed, otherwise manually install it as per the readme
3) fetch your kernel source into the ~/android directory and change into the
source codes root directory
(this can be via a git repo or tarball)
example if you wanted my ACER a100/a500 source you might run:
git clone git://github.com/ezterry/AcerTabKernel.git
cd AcerTabKernel
change this to match the source you are fetching
4) In the root directory of the kernel source (~/android/AcerTabKernel in the about a100/a500 example) update the environment for the cross compiler
add the toolchain to your path:
export PATH=$HOME/android/toolchain-4.6.3/bin:$PATH​
set the cross compile:
export ARCH=arm
export CROSS_COMPILE=arm-linux-androideabi-
export KERNEL_DIR=`pwd`​
(this will need to be done once for each terminal you use to run any of the following make commands)
5) Grab your configuration
From the device:
adb pull /proc/config.gz
gzip -dc config.gz > .config
or from a prepared configuration if it's included in your code base by running
make _defconfig
example for the a100/a500 code base is 'make vangogh_defconfig' for the a100 and 'make picasso_defconfig' for the a500
6) Customize configuration
just run menuconfig and use the UI to update settings
make menuconfig​
7) building the kernel (zImage)
This is normal at this point with 'make -j'
so for a quad core CPU you can run
make -j5​
(note: the wrong number in the -j argument will not harm the build but may slow down the building process by either using too few threads or needing to keep track of too many)
8) If it worked you will now have the kernel in arch/arm/boot/zImage
this can be injected into the boot.img (as the kernel, using an existing ramdisk) as is
If it failed for your kernel your kernel source may need one of the common patches
9) Building modules
the following will prepare the modules in subdirectory mod:
make modules
rm -rf mod
mkdir mod
cp `find ./ | grep .ko$` modules.order mod/​
After these commands [if no errors] you can simply copy the contents of mod/ to /system/lib/modules on your device, note it is recommended usually to remove the existing contents of /system/lib/modules unless there is a closed source module required from the previous build despite the new kernel.
[size=+1]Common Patches Required[/size]
If your kernel has not been built for the new toolchain or on cygwin before you may require some of these common patchs: (I've thus far only tested this on my Acer A100/A500 source)
wireless/bcm4329 for GCC-4.6.3:
https://github.com/ezterry/AcerTabKernel/commit/123f32e27e2c74f1c1789ae5d6d5a1c04e1e264c
linux kernel module patch for cygwin (broken elf.h):
https://github.com/ezterry/AcerTabKernel/commit/220db49593cf6b9f3b556e2f4b75b2f6d3ff556c
Error compiling security/smc/bridge_pub2sec.S (I required the cygwin elf patch and this patch to build the Franco galaxy nexus kernel)
0001-Fix-build-error-with-4.6.3-toolchain-smc-0.patch
(use 'git am 0001-Fix-build-error-with-4.6.3-toolchain-smc-0.patch' to apply)
OSX stat patches (fixes errors between GNU and BSD stat):
https://github.com/ezterry/AcerTabKernel/commit/0c49df3cc1a05a0ccd98201511cdc0534aaeb35a
Errors loading newly built modules (modules appear to build cleanly but wont install):
simply add -fno-pic to CFLAGS_MODULE
https://github.com/ezterry/AcerTabKernel/commit/c5ed0fcb014d36936a86ad253f15af43de2f644a
(I can add others here if highlighted to me, and as I find them)
[size=+1]Other Toolchain uses[/size]
The linux toolchain can be used to build android components, however this requires various manipulation to the android /build git repository as currently various other toolchains have hard coded paths into the prebuilt repo. If you intend to incorporate this into your build it may be best to inject the toolchain into your prebuilt repo rather than expect your users to download the links above, ensure to keep the compile notes as it explains how to get the source code to the toolchains)
On cygwin/osx it may also be possible to build android applications however I've not yet tested this as the scripts to make a proper build are complex when attempted outside the android build tree.

Excellent!!! thanks Man!!! Has been looking for one of these

Added in the OSX version of the toolchain (and some related patches)
Also if you are having problems with your modules built with this toolchain a CFLAG fixes it. (see note in common patches)

FINALLY!!! Great Instructions followed them to the T and BAM got my kernel compiled!!!

wow your toolchain is so small, many thanks, just compiled a kernel for my LG P500 gonna test it, thanks again

Bookmarked for testing when I wake up...
I can almost put: "Building under Windows is not currently supported." (quote from google), unofficially at least, out of my mind...
I have been spoiled by Windows for far too long I fear, my attempt for this last week at getting Linux setup and building CM9 has been nothing but a complete FAILURE, too many single line entrys for different distributions/package combo's, commands I dont know and cant find because of wildcard portions of them and lack of understanding, and not enough scripts like the wonderful Compile CM9 script someone put up (cant run it because all the pre-req's arent setup).
Good god Ill be jumping for joy if this works tomorrow on WinBlows!

EDIT: never mind, problem solved, what I need to know now won't be solved here

I wish i knew how to go about doing this..

Thanks
Thanks For ........... i Really need It .........

Hammerfest said:
Bookmarked for testing when I wake up...
I can almost put: "Building under Windows is not currently supported." (quote from google), unofficially at least, out of my mind...
I have been spoiled by Windows for far too long I fear, my attempt for this last week at getting Linux setup and building CM9 has been nothing but a complete FAILURE, too many single line entrys for different distributions/package combo's, commands I dont know and cant find because of wildcard portions of them and lack of understanding, and not enough scripts like the wonderful Compile CM9 script someone put up (cant run it because all the pre-req's arent setup).
Good god Ill be jumping for joy if this works tomorrow on WinBlows!
Click to expand...
Click to collapse
If you succeed tell me how to do it in a more familiar way

I get errors regading the processor not being supported?

brfield said:
I get errors regading the processor not being supported?
Click to expand...
Click to collapse
Sorry I can't support devs that have not learned cut copy and paste.
You probably forgot to export some of the environment variables or are just trying to run a arm binary on your PC and or a x86 binary on your arm device.
But why am I guessing? Why don't we know what you tried to run and what the actual text of the error was.. what type of kernel you tried to build, what you are running?
These packages are for developers if you feel like using them its time to learn to how to trouble shoot a problem and write a ticket to explain said problem clearly to others with at least some information to give us a chance to understand.
Sent from my Galaxy Nexus using Tapatalk 2

Great guide. Have the bcm4329 wireless module, so followed the tips and everything compiled and works!
Thanks!

one question,how to compiled android kernel with -O3 optimization?

jxxhwy said:
one question,how to compiled android kernel with -O3 optimization?
Click to expand...
Click to collapse
Um, in general its recommended you don't:
-O3 is not recommended for the kernel as many low level parts require the assembly code generated to remain as is and not be optimized as will be by some of the options -O3 enables thus likely reducing the stability of your kernel.
---
That said the menuconfig has an option to optimize for size (-Os) if enabled else -O2
For other optimization (including tuning for your cpu) you can add them to the CFLAGS_KERNEL/CFLAGS_MODULE in the make file.)
For -O3 like functionality you could add the increment to the line:
-finline-functions, -funswitch-loops, -fpredictive-commoning, -fgcse-after-reload, -ftreel-vectorize, -ftree-partial-pre and -fipa-cp-clone
-Ofast is -O3 with -ffast-math as well
If you do build with all the -O3 or-Ofast options ensure you test the kernel for stability and run some benchmarks. (as it may not actually be faster depending on the cache misses)
The first option I'd start pruning was the one mentioned in my reference below -fgcse-after-reload.
If you really insist on -O3 rather than just adding the optimization you want that are not in O2,it can be added also in the Makefile where the configure flag is checked and its added to KBUILD_CFLAGS
Obviously all and any of this is at your own risk, anything that breaks you have to find a way to fix it.
Reference:
Gcc optimize options:
http://gcc.gnu.org/onlinedocs/gcc/Optimize-Options.html
Talk of O3 and the kernel (not android specific)
http://unix.stackexchange.com/questions/1597/compiling-gnu-linux-with-o3-optimization

ezterry,thank you very much!
I want to build cm9 kernel using toolchain 4.6.3.
How to replace the default GCC 4.4.3 to 4.6.3 version?
BTW,I use the way -- make bootimage

jxxhwy said:
ezterry,thank you very much!
I want to build cm9 kernel using toolchain 4.6.3.
How to replace the default GCC 4.4.3 to 4.6.3 version?
BTW,I use the way -- make bootimage
Click to expand...
Click to collapse
If you are asking in a cm9 build tree.. its a pain, best is to update the cm kernel makefile to point the build chain temporarily.
If you mean just to compile by hand as described in the op
Once the kernel is compiled find an anykernel update.zip or manually use mkbootimg or fastboot to merge it with the ram disk. Cm9 targets mkbootimg and unpackbootimg (if I'm not mistaken) will build the applications to unpack your current (or the default cm9) boot image and re-create them with your custom kernel built from hand.

Now,I runing script file:
#Let's make sure the environment is clean and ready to compile the kernel
echo "Cleaning house!!"
make mrproper
echo "House cleaned, lets build a kernel!!!"
#
# Lets set the kernel defconfig
echo "defconfig = cyanogenmod_iprj_defconfig"
make ARCH=arm cyanogenmod_iprj_defconfig
#
# Let's build a kernel
echo "Now compiling kernel, go get a soda! "
ARCH=arm CROSS_COMPILE=~/Android/sourcecm9/cm9/toolchain-4.6.3/bin/arm-linux-androideabi- make zImage -j4
#
if [ -f arch/arm/boot/zImage ]; then
echo "Plague has been compiled!!! You can find it in arch/arm/boot/zImage"
else
echo "Kernel did not compile, please check for errors!!"
fi
but,I got some error output:
/home/xxx/cm9/toolchain-4.6.3/bin/arm-linux-androideabi-ld: cannot find usr/initramfs_data.o: No such file or directory
thanks again!!!

I think that means there is an issue with your config..
Most android kernels require initramfs, but don't specify a file, as its provided by the bootloader.. However in your case it is trying to embed it into the kernel.
Sent from my A500 using Tapatalk 2

ezterry said:
I think that means there is an issue with your config..
Most android kernels require initramfs, but don't specify a file, as its provided by the bootloader.. However in your case it is trying to embed it into the kernel.
Sent from my A500 using Tapatalk 2
Click to expand...
Click to collapse
issue has been resolved by myslef.Thanks for your time.

[Q] Nook color kernel building

Hi guys,
Can we use the android NDK tool from this link here to compile an overclocking kernel on Cyanogenmod 10.2.2 for the nook color? Or do we need to modify the existing overclocking kernel at this source here? It looks like android NDK comes with the toolchains needed for compiling a kernel on the nook color? Or do the makefiles need to be changed from the earlier <dalingrin> kernel to work properly on this device? https://github.com/meteorrock/android_kernel_bn_encore
I am on a x64 linux machine and have all of the dependences met to try to compile a kernel for us. I am using this link here for the dependencies.http://ohheyitslou.blogspot.com/2011/09/ohheyitslou-custom-android-kernel-guide.html
Code:
sudo apt-get install -y build-essential kernel-package libncurses5-dev bzip2
I am aware of the Android SDK package with its pre-installed toolchains but the nook color is a stubborn tablet device. Most kernel building guides online are for smartphones.
Any help in this area or input would be appreciated. I have noted this question was asked before in 2011, and went unanswered on this issue as noted above asking this question with the options of XDA 2013 beta.
Thanks.

meteorrock:
Good luck on kernel development. I just set up an android build environment which includes kernel building. If you want a smaller system look at this thread. While the information is specific to the touchpad, almost everything applies to any device, including the NC.
http://rootzwiki.com/topic/21362-guide-build-cm9-kernel-wo-building-rom/
Everything is the same up to the uImage stuff. The touchpad needs a ramdisk combined with the kernel image. It's actually simpler for the NC. All you have to do is adb push the uImage you build to /uImage . Reboot and hope it boots.

An even better guide, in my opinion, is this old one from fattire. It is specifically for the Nook, and will teach you to build Cyanoboot as well. If you are building the 3.0+ kernel, you don't use the omap_evta conifg, anymore, use the encore config in arch/arm/config
There is a separate config for CM-10.1...better to use that if building the component for that rom.
All that is needed is to swap the config in the example for the one you use, and makes sure that the command is pointing to your exact ndk. The example is from NDK 5b, which is way way old by now. There is some talk about Code Aurora tools chains, but you do not need them, it compiles with the NDK just fine.

Building arm64 kernel for Galaxy S7 Edge (SM-G935F) question.

Hello,
First of all, im new to android modding and linux. I tried to build a kernel from stock G935FXXU1BPH6 source based on their readme file. My problem is, I don't have a zImage file after build that I could put into a flashable zip. I only have Image and Image.gz (I guess thats normal for arm64 kernels?) and I don't know how to make them flashable. I found a youtube video where the dude placed the Image file in a directory called "tools" in his flashable zip, I tried it and TWRP said I installed it successfully but when I start up my phone and check kernel version its still the previous one not mine.
Used this toolchain: aarch64-linux-android-4.9/bin/aarch64-linux-android-
I've set up CROSS_COMPILE path, then I set up configuration:
make ARCH=arm64 exynos8890-hero2lte_defconfig
make menuconfig (to tweak it a little bit more, like custom kernel version string so I can see if it worked)
Then I started build:
make ARCH=arm64
Output when build finished:
>>>>> Time used for generated all hashes is 6 sec
OBJCOPY arch/arm64/boot/Image
GZIP arch/arm64/boot/Image.gz
DTC arch/arm64/boot/dts/exynos8890-smdk8890.dtb
DTC arch/arm64/boot/dts/exynos8890-universal8890.dtb
Anyone knows how could I make it flashable? Thanks.

keezay said:
Hello,
First of all, im new to android modding and linux. I tried to build a kernel from stock G935FXXU1BPH6 source based on their readme file. My problem is, I don't have a zImage file after build that I could put into a flashable zip. I only have Image and Image.gz (I guess thats normal for arm64 kernels?) and I don't know how to make them flashable. I found a youtube video where the dude placed the Image file in a directory called "tools" in his flashable zip, I tried it and TWRP said I installed it successfully but when I start up my phone and check kernel version its still the previous one not mine.
Used this toolchain: aarch64-linux-android-4.9/bin/aarch64-linux-android-
I've set up CROSS_COMPILE path, then I set up configuration:
make ARCH=arm64 exynos8890-hero2lte_defconfig
make menuconfig (to tweak it a little bit more, like custom kernel version string so I can see if it worked)
Then I started build:
make ARCH=arm64
Output when build finished:
>>>>> Time used for generated all hashes is 6 sec
OBJCOPY arch/arm64/boot/Image
GZIP arch/arm64/boot/Image.gz
DTC arch/arm64/boot/dts/exynos8890-smdk8890.dtb
DTC arch/arm64/boot/dts/exynos8890-universal8890.dtb
Anyone knows how could I make it flashable? Thanks.
Click to expand...
Click to collapse
This particular chipset (64-bit Exynos) uses the uncompressed Image and a separate dtb.img file made from combining all the dtb revisions of your device codename and region into a DTBH format.
You can flash them using my LazyFlasher project.
See: https://github.com/jcadduono/lazyflasher
You will want to use the kernel-flasher branch. The kernel-flasher-samsung branch isn't fully ready and adds additional patch files to remove TIMA/Knox. I've yet to find out everything that needs to be changed from stock state to allow a bootable custom kernel without disabling encryption, unfortunately.
You can simply git clone it, then place your Image and optionally dtb.img in the root folder of the repository, then type "make" to build a TWRP flashable zip. They will be dynamically replaced in the current boot image on the device when the zip is flashed. You can check out the README.md for more info.
If you want to generate your own dtb.img to include in the installer, you can use a script I made from my universal8890 kernel sources on GitHub:
https://github.com/jcadduono/android_kernel_samsung_universal8890/blob/stock-6.0/dtbgen.sh
(correct the toolchain location for your build in the script)
It also requires the scripts/dtbTool folder (from the same git linked above) to be present in your repository. It's not the same as the Qualcomm dtbTool, and the sources are included (and fairly clean!) if you're interested in learning the Exynos dtb.img (DTBH) format.
./dtbgen.sh hero2lte xx
Now, there's still quite a bit that needs to be done to make the device actually boot successfully and be stable with a custom kernel. While the kernel is perfectly stable, the Samsung customized Android OS will absolutely freak out. That's a bit beyond me, and the reason I haven't really worked on any custom kernels for it myself.
Have fun!

jcadduono said:
This particular chipset (64-bit Exynos) uses the uncompressed Image and a separate dtb.img file made from combining all the dtb revisions of your device codename and region into a DTBH format.
You can flash them using my LazyFlasher project.
See: https://github.com/jcadduono/lazyflasher
You will want to use the kernel-flasher branch. The kernel-flasher-samsung branch isn't fully ready and adds additional patch files to remove TIMA/Knox. I've yet to find out everything that needs to be changed from stock state to allow a bootable custom kernel without disabling encryption, unfortunately.
You can simply git clone it, then place your Image and optionally dtb.img in the root folder of the repository, then type "make" to build a TWRP flashable zip. They will be dynamically replaced in the current boot image on the device when the zip is flashed. You can check out the README.md for more info.
If you want to generate your own dtb.img to include in the installer, you can use a script I made from my universal8890 kernel sources on GitHub:
https://github.com/jcadduono/android_kernel_samsung_universal8890/blob/stock-6.0/dtbgen.sh
(correct the toolchain location for your build in the script)
It also requires the scripts/dtbTool folder (from the same git linked above) to be present in your repository. It's not the same as the Qualcomm dtbTool, and the sources are included (and fairly clean!) if you're interested in learning the Exynos dtb.img (DTBH) format.
./dtbgen.sh hero2lte xx
Now, there's still quite a bit that needs to be done to make the device actually boot successfully and be stable with a custom kernel. While the kernel is perfectly stable, the Samsung customized Android OS will absolutely freak out. That's a bit beyond me, and the reason I haven't really worked on any custom kernels for it myself.
Have fun!
Click to expand...
Click to collapse
Thank you very much!

@jcadduono couldn't make the kernel boot after packing it with lazyflasher. I built a completely stock kernel from the mentioned source, pasted the "Image" (not the Image.gz) file in lazyflasher root and then used make command. Tried including "exynos8890-smdk8890.dtb" file as well. Same story. Not sure if I need anything else in the package or I made user mistake. Do you have any ideas how could I debug what makes it stuck on that screen?
Thanks!
EDIT: Solved Problem.

keezay said:
@jcadduono couldn't make the kernel boot after packing it with lazyflasher. I built a completely stock kernel from the mentioned source, pasted the "Image" (not the Image.gz) file in lazyflasher root and then used make command. Tried including "exynos8890-smdk8890.dtb" file as well. Same story. Not sure if I need anything else in the package or I made user mistake. Do you have any ideas how could I debug what makes it stuck on that screen?
Thanks!
EDIT: Solved Problem.
Click to expand...
Click to collapse
Can you help me set up an environment to build a kernel, arm64, for s7? I'm on Ubuntu having a heel of a time..

Galaxy S7 Edge Kernel Flashing Issues
I am currently trying to flash a different kernel into a galaxy s7 edge (SM-G935S).
I have gone as far as building a kernel and extracting a Image file from it, but every time I try flashing a boot.img with a replaced kernel image file, it seems to never work.
A mkbootimg tool that I am currently using requires a dtb file, but I cannot find where to get it from.
I have tried using @jcadduono's git code, but the dtb file created from it doesn't seem to work as well.
Can anyone tell me what I should do to flash a kernel successfully?

kernel panic after flashing
Hi @ll,
with this guide I was able to compile my own kernel and also flashing it to my phone. Unfortunatelly I'm getting kernel panic after rebooting the phone. is there any possibility to get the reason for this? Or do you have any hint, what I may have done wrong?
Thanks for your help.
Kind regards
v0ti

A complex situation related to proximity sensor issue running ANDROID 8 builds.

Recently Xposed modules were released for Android7 that gave me a relief for the proximity sensor problem in my device. Before that I used a recompiled dialer.apk from @digital0 (https://forum.xda-developers.com/showpost.php?p=69507586&postcount=253).
As the new Android builds for my device has released LINEAGEOS15, AIM ROM, AEX ROM. I was curious to use them all, the ROM's are working fine but the problem of proximity sensor for dialer came back. As there is no xposed module for Android 8 I had the only option to use the recompiled dialer.apk that I have mentioned above.
The problem starts here I cannot push the dialer.apk to my device using adb/fastboot tools it gives me the error that "adbd cannot run as root in production builds" (https://forum.xda-developers.com/showthread.php?t=833756) again I used this thread to do exactly what it said but It was a fail and In the Fastboot mode I get bootloader unlock:false but I'm running a custom ROM and custom RECOVERY that would not be possible with a locked bootloader.
So i decided to to insert the recompiled dialer.apk to priv-app in system folder of my ROM using Ubuntu(system.new.dat>system.img>system folder). I succeeded to keep the recompiled dialer.apk in the priv-app folder I repacked the folder to system.img>system.new.dat. Compressed all the files to .zip and flashed the ROM, booted the device and as soon as I open the dialer.apk it pops a message saying "Unfortunately app has stopped working".
and for the information I modified AIM ROM which had a dialer.apk(v.10) and mine was dialer.apk(v.3).
Any help will be appreciated. It is a long topic please don't stress out. I know should have changed my display but I'm curious to know why this is happening.
if anyone knows how to recompile a apk please help me.

You have to recompile the app for your version of Android.

How to recompile - get the sources for your Android (LineageOS I assume) version, patch the source (for cm14 it was packages/apps/Dialer/InCallUI/src/com/android/incallui/ProximitySensor.java file), then compile dialer - I used command "make Dialer DISABLE_DEXPREOPT=true WITH_DEXPREOPT=false".
Then the compiled apk was here - out/target/product/generic/system/priv-app/Dialer/Dialer.apk.

digital0 said:
How to recompile - get the sources for your Android (LineageOS I assume) version, patch the source (for cm14 it was packages/apps/Dialer/InCallUI/src/com/android/incallui/ProximitySensor.java file), then compile dialer - I used command "make Dialer DISABLE_DEXPREOPT=true WITH_DEXPREOPT=false".
Then the compiled apk was here - out/target/product/generic/system/priv-app/Dialer/Dialer.apk.
Click to expand...
Click to collapse
Any tutorial that can explain this process step by step.

There are tutorials how to compile LineageOS, you can use any, not specifically for your device, because you need to compile Dialer.apk only.

So can you elaborate it please. More specific how how to do it step by step @digital0

No, I am not writing tutorial how to compile LineageOS step by step, sorry. I can show commands which I used to compile (probably), but you have to adjust them to the new Android version:
repo init -u https://github.com/LineageOS/android.git -b cm-14.1
repo sync
patch
make Dialer DISABLE_DEXPREOPT=true WITH_DEXPREOPT=false
Edit: instead of cm-14.1 you will probably need to use lineage-15.0
See https://github.com/LineageOS/android/tree/lineage-15.0 for more information.

Thanks for the info I will start working on it and let you know when it is finished