Galaxy S4 i9505- Not Rooting Through Any Apps - Galaxy S 4 Q&A, Help & Troubleshooting

S4 i9505 not rooting through any apps
Hi, I recently flashed cm12.1 on my S4 i9505 and its working fine.
I need a working GApps package, I tried flashing 2 PA GApps(mini and micro), updated version which is TK GApps(mini), and also cleared calvik cache before and after flashing them as some forums suggested, but none of them worked and all Google apps keep crashing as soon as I boot in CM even the keyboard.
The 2nd issue: My phone is not rooted anymore and I tried a couple of rooting android and windows apps but none seem to root my phone, fails everytime. The errors which I faced are below.
Framaroot: "Your device seems not vulnerable to exploit included in Framaroot"
iRoot (android): "GT- i9505 No Root Permission"
iRoot (windows): "Device is connecting
eRoot (windows): Stuff written in chinese and no root button available as mentioned in different forums"
KingoRoot: "Root Strategy unavailable, just try it"
TowelRoot: Stuck on make it ra1n and after a while "towelroot stopped responding"
Root Checker: "Root checker has stopped working"
3rd Issue: I tried installing playstore apk till I get my GApps working, but it crashes everytime I open it, any solutions?
Thanks

AAF1994 said:
Hi, I recently flashed cm12.1 on my S4 i9505 and its working fine.
I need a working GApps package, I tried flashing 2 PA GApps(mini and micro), updated version which is TK GApps(mini), and also cleared calvik cache before and after flashing them as some forums suggested, but none of them worked and all Google apps keep crashing as soon as I boot in CM even the keyboard.
The 2nd issue: My phone is not rooted anymore and I tried a couple of rooting android and windows apps but none seem to root my phone, fails everytime. The errors which I faced are below.
Framaroot: "Your device seems not vulnerable to exploit included in Framaroot"
iRoot (android): "GT- i9505 No Root Permission"
iRoot (windows): "Device is connecting
eRoot (windows): Stuff written in chinese and no root button available as mentioned in different forums"
KingoRoot: "Root Strategy unavailable, just try it"
TowelRoot: Stuck on make it ra1n and after a while "towelroot stopped responding"
Root Checker: "Root checker has stopped working"
3rd Issue: I tried installing playstore apk till I get my GApps working, but it crashes everytime I open it, any solutions?
Thanks
Click to expand...
Click to collapse
1. Gapps: http://opengapps.org/
2. You cannot loose root acces on CM. It's impossible. You just need to activate it in developer settings and after that flash Supersu (optional). All the apps etc you tried is completely obsolete.
3. See post number 1.

Lennyz1988 said:
1. Gapps: http://opengapps.org/
2. You cannot loose root acces on CM. It's impossible. You just need to activate it in developer settings and after that flash Supersu (optional). All the apps etc you tried is completely obsolete.
3. See post number 1.
Click to expand...
Click to collapse
I already have root access set to "apps and ADB" in developer options. is this what you're referring to?

AAF1994 said:
I already have root access set to "apps and ADB" in developer options. is this what you're referring to?
Click to expand...
Click to collapse
Yes.
I would suggest performing a full wipe then flash CM and then the Gapps.
or you can try to just flash Supersu and your root will probably be back.
http://forum.xda-developers.com/showthread.php?t=1538053

Lennyz1988 said:
Yes.
I would suggest performing a full wipe then flash CM and then the Gapps.
or you can try to just flash Supersu and your root will probably be back.
http://forum.xda-developers.com/showthread.php?t=1538053
Click to expand...
Click to collapse
I tried your suggestion, did a full wipe and flashed CM successfully through TWRP, the flashed GApps successfully, and SuperSU also, but just before rebbot, TWRP asked for "fix root" and when i swiped for yes, the reboot brought me back to Samsung logo and never rebooted CM... waited for about 15 mins before pulling the battery out...
I tried to flash CM and a stock firmware through odin then and now it says "Firmware upgrade failed, try KIES...... " odin fails to flash anything and gives error "No PIT Partition", even if I try to flash PIT files (tries 4 different files for i9505), all failed....
now I can only access download mode and lost TWRP too...
help please!

Install a stock ROM through Download Mode. This will get you back to a working state. From there get TWRP and then install CM12.1. And this time around, follow instructions! At no point were you EVER told you had to fix root, and as you found out, fixing root removes root access.

Honestly mate I was on CM for a while with my i9505 intl before deciding to try something else. I recommend this rom http://forum.xda-developers.com/showthread.php?t=2557353 . either the latest 5.1 or previous 5.0.1 release, they are both rock solid and there's great support for it too. They've even packaged cm addons as optional flash files.
Sent from my GT-I9505G using Tapatalk
---------- Post added at 04:15 AM ---------- Previous post was at 04:11 AM ----------
Sorry forgot to mention it's a Google play edition so rest assured your gapps come included.
Sent from my GT-I9505G using Tapatalk

Related

D802 CM13 SuperSU binary needs to be updated

Hello!
I have spent around 5-6 hours tonight fixing my phone. Before it had CM13 working just fine but my recovery didn't work (got an error when trying to enter recovery). I manged to solve that problem by doing lots of things I have already forgotten about now and to be honest I didn't really have any idea what I was doing as I am very new to this and have no knowledge about it.
Right now my CM13 works just fine. No problems booting. My recovery works just fine. I have CAF bootstack and the latest TWRP recovery that was mentioned in the guide. However, my SuperSU doesn't want to work properly. At first, I had to download the SuperSu app from Play Store. I don't know if that's how it is supposed to be. When I start the app it says "The SU binary needs to be updated. Continue?". I press Continue and it says "If you have a custom recovery like TWRP or CWM, that can be used to (try to) install the SU binary. This is recommended for HTC devices. How would you like to install the SU binary?". I have two options: "NORMAL" and "TWRP/CWM". If I press "NORMAL" it proceeds to installing and the circle is spinning and spinning... "Installing, please wait..." After about 30 seconds it says "Installation failed! Please reboot and try again". Rebooting and trying again doesn't help. If I try the TWRP/CWM option it reboots me into TWRP Recovery but nothing happens there. If I reboot system from recovery the problem remains. I googled a bit and found some thread where they said I needed to download some SuperSU zip-file and install it from recovery. I did that but that just broke it even more giving me some error saying SuperSu wasn't installed at all, or something like that. I ended up re-rooting the device and installing bootstack, CM, and GAPPS again.
I have enabled root access in the CM developer options menu, for both apps and ADB. I have downloaded Root Checker and it says i am rooted. In download mode it also says rooted.
Is there some step I have missed? Please help me. I just want CM13, Recovery, and SuperSU to all be working at the same time. Not just pick two, like I have done before.
I had the same problem on my d802. That thing you did in development settings worked for me. Is supersu so neccesary?

Rooting a Moto G4 Android 6.0.1

Hi,
I originally posted this over at android central where I was told it is not possible to root a Moto G4, so I am trying here hoping for a different answer = )
I am attempting to install Cyanogenmod on my handset using the below guide:
Install_CM_for_peregrine (looks like I can't post link but that is the name of the page on he Cyanogenmod site)
I have unlocked the handset, copied the Cyanogenmod zip file to my sdcard, booted in recovery mode and attempted to install the zip package. At this point I get an error "E:failed to verify whole-file signature". I have tried both the stable and nightly build with the same result. Also when I have attempted to install SuperSU using the same process have received the same error so I suspect it is not a corrupted file.
I believe this is being caused by the signature check and to get around this have been following the below guide to disable signature check:
tutorial-how-to-disable-signature-check.html (name of the tutorial as can't post links)
When it comes to the step "Then find a option Called "Patch To Android", I don't see this option, and from what I understand this may be due to not having my phone rooted.
I have installed Kingo ROOT to resolve this but it failed to root the handset (error 0x1C5C33 if that means anything to anybody), checking the list of phones which Kingo ROOT can root, Moto is not one of them. What are the other options?
Any advice greatly appreciated. Thanks in advance.
Get rid of kingo. Look up android doctor on YouTube for unlock, root, twrp instructions. CM has a lot of bugs and isn't ready for daily use on this device. Slim roms has released their rom, it's CM based. I've been using it for a few days, and it's running smooth. There's a thread about it with the link on here. The only problem I've had was a boot loop when I try and flash xposed and supersu. There's a built in super user access in the settings, so supersu isn't necessary.
hooks024 said:
Get rid of kingo. Look up android doctor on YouTube for unlock, root, twrp instructions. CM has a lot of bugs and isn't ready for daily use on this device. Slim roms has released their rom, it's CM based. I've been using it for a few days, and it's running smooth. There's a thread about it with the link on here. The only problem I've had was a boot loop when I try and flash xposed and supersu. There's a built in super user access in the settings, so supersu isn't necessary.
Click to expand...
Click to collapse
Phone rooted, thanks!
Now to install SlimRoms
Strange, after rooting gained the below options in Lucky Patcher:
Signature Verification Status always True
Disable .apk Signature Verification
Disable signature verification in the package manager
Patch applied for all three, but then when I restart in recovery mode and attempt to install the SlimRoms zip still getting error "E:failed to verify whole-file signature".
I didn't patch anything. Just root, installed twrp, and flashed slim rom and gapps
hooks024 said:
I didn't patch anything. Just root, installed twrp, and flashed slim rom and gapps
Click to expand...
Click to collapse
Ah I see, did not realise you install the rom via twrp. It's installed now, awesome, thanks.

[Q] Magisk Root

Has anyone been able to get magisk to work appropriately? I attempted and the magisk apk kept fc'ing. I read about LG devices needing a boot.img "bump". Is this true or has anyone got it working in their own way?
There Is no root method for variants that don't have a unlocked bootloader. You would know this if you read the forums before asking
Sent from my VS995 using Tapatalk
mrtruckincowboy said:
There Is no root method for variants that don't have a unlocked bootloader. You would know this if you read the forums before asking
Click to expand...
Click to collapse
So, quite frankly, if you read, another user has it working. Further more, with the TMO variant, I do have an unlocked bootloader. Root application works with magisk, however the APK itself fc's.
I thought cowboys were polite ; )
I misread your post thought you were the typical person asking for a update on root I apologize.
Sent from my VS995 using Tapatalk
Thats what you get for not reading posts Cowboy... Smh...
I have the H918/tmo and I was able to get magisk running with phh's superuser. I'm kinda iffy on magisk-hide, as i had issues with it initially ( random reboots with it enabled). I turned off magisk hide for about a week, then turned it back on last night with no reboots since.. but haven't tested it with apps.
After running the easy recowvery + root script, i got rid of SuperSU. I believe all i did was a Full Unroot in the options, with no changes to the recovery. (I also may have done a format /data when rebooting to recovery again, but i dont recall fully, so take that into consideration if it didnt work at first (followed by the no-verity-opt-encrypt zip).)
After getting rid of SuperSU/su binary, what i remember doing was:
1 ) Flash magisk v9.zip -> reboot to system to make sure it boots, then adb reboot recovery.
2 ) Flash phh's superuser r266-2.zip -> reboot to system
3 ) install magisk manager via apk, and phh's superuser via playstore.
4 ) test out root.
has anyone been able to get Phh's superuser to work on the Sprint v20 / LS997 ?? If so, how? Thanks in advance.
If you can't get this working there is an app called RootSwitch. It can successfully hide root on the V20 with a toggle.
HiddenKnight said:
Has anyone been able to get magisk to work appropriately? I attempted and the magisk apk kept fc'ing. I read about LG devices needing a boot.img "bump". Is this true or has anyone got it working in their own way?
Click to expand...
Click to collapse
ive got 1 working and 1 in testing that uses magisk and phh.
the phh superuser seems to be casusing the systemui to force close often when in hide mode and the random reboots and loss of service, otherwise it was working fine.
but yeah, just flash version 10.2 on your current rom and see what happens!
btw this was on DEC sec patch, on oct builds i never tried it, but this is latest DEC sofware, didnt even use rootswitch
slayerh4x said:
If you can't get this working there is an app called RootSwitch. It can successfully hide root on the V20 with a toggle.
Click to expand...
Click to collapse
Is this the App you used?
https://forum.xda-developers.com/android/apps-games/play-pokemon-root-switch-method-patched-t3483179
remix435 said:
Is this the App you used?
https://forum.xda-developers.com/android/apps-games/play-pokemon-root-switch-method-patched-t3483179
Click to expand...
Click to collapse
I am using the one from this rom thread;
https://forum.xda-developers.com/v20/development/h819-nrd90m-modded-stock-rom-t3503658
Just follow the directions in the OP and you'll be g2g.
slayerh4x said:
If you can't get this working there is an app called RootSwitch. It can successfully hide root on the V20 with a toggle.
Click to expand...
Click to collapse
Tried RootSwitch w/ SuperSU. Didn't pass SafetyNet if that's what you were referring to.
Tried it again last night. Had the 1st 3 options turned on. Soon as I opened Android Pay my phone hot booted and got stuck on the VZW splash screen. Had to pull the battery. Won't try that again with supersu.
I have a VS995 this is how I got my phone to finally take magisk and pass the safetynet check. I'm running software version VS99513A I performed dirty santa to get unlocked bootloader and root access. Now I tried to uninstall supersu threw the app and I got a failed message. I tried going into recovery and flashing the supersu unistaller and that would fail. I tried flash magisk v12.0 and keep getting error message. I got stock in twrp recovery several times and used LGUP and flash either VS99512A KDZ or the VS99513A KDZ. Am not a developer but it seemed as if the boot.img won't take by the magisk zip. Those where my failed attempts for about a week or two. Now on to the success story
Performed Dirty Santa on software version VS99513A. I decide to flash modstock kernaI update v1.1 because it seem to work well with a stock rooted VS995. I flashed busy box in recovery and downloaded the app and also downloaded quick reboot so I could reboot into recovery easier. After reading @poixninja thread on modstock kernal - stocked with goodies he mention flash a boot.img that was patched with magisk. So I but the phone into fastboot mode and flashed his boot.img onto the phone with cmd (command prompt). I think I might have tried to uninstall supersu threw the app and I think it didn't work after flash the boot.img. So I put the phone into recovery mode the to wipe and then to advance wipe and clear dalvik and cache. After that I went to install and flashed the supersu unistaller and it took. After flashing I wipe the cache that twrp ask after most flashes. I then rebooted into recovery to make sure my twrp was not affected because I had and issue with that in previous supersu unistaller attempts. Rebooted ito twrp recovery then rebooted into system. I think whenever I flashed the verzion logo stayed up longer than normal but the phone fully started up. I clicked on supersu and it said no root access. Turned of the phone and did the steps to get to recovery mode. Once in I first wiped dalvik and cache. Then I flashed magisk unistaller and it went threw with no issue. I wiped dalvik and cache then rebooted into recovery. After getting into recovery I rebooted to system.
Sidenote: I recommend after wiping supersu and flashing magisk unistaller. Once you boot up install magisk apk. I didn't install the apk until after I flashed the magisk v12.0 in recovery. I noticed when I reboot the magisk icon was on the phone but when I clicked it it said go to playstore to download. I had the magisk manager apk on my SD card so I just installed it. The install to longer than normal I think it was because I didn't install it prior to flash the zip in recovery. I didn't get a chance to verify it yet.
Once the phone boot and I installed the magisk app manager I open it up and got green checks for installed magisk v12 and properly rooted. I went to setting and turned on enable busy box, magisk hide, and systemless. But when I clicked safetynet I got cts mismatch. Did some research and read on other XDA magisk thread that it maybe because of custom roms, modified kernals and possible supersu somewhere on the system. The only root accessible apps I had installed during this process was busybox and quick reboot. I did notice the first time I ran quick reboot after getting magisk it did give it root access then it did after I opened it again.
I decide to uninstall quick reboot and busy box. I uninstalled both apps. I rebooted into recovery mode the manual way. First thing I did was wipe dalvik and cache. Then I flashed busy box uninstaller. When the flash was running I say in the command lines that it found supersu. Which I thought was odd so I also flashed supersu unistaller. I rebooted into recovery wipe dalvik and cache and flashed uninstall magisk. Then reboot into recovery. I ran busy box uninstaller one more time to see if it would pick up supersu again and the command lines did not mention it. I flashed back magisk v12.0 rebooted into recovery. Then rebooted into system
Opened magisk went to setting to turn on enable busy box, magisk hide and systemless. Check safetnet and failed I found a magisk XDA thread that talks about common issue. It said I had to check magisk core only mode. Once I did that he requested a reboot which I did. Once back up I first cleared in app manager under show system I cleared all data for google play store, google play service for instant app, google play services. I opened magisk clicked safetynet check and I passed it. I went to search for netflix in play store and it pop up I installed it and it working fine so far. I tried logging into snapchat and I got threw.
Hope this maybe help full to anyone having issues
https://forum.xda-developers.com/v20/development/kernel-modstock-kernel-stock-goodies-t3563887 (boot img and modstock v1.1)
https://forum.xda-developers.com/showpost.php?p=71154562&postcount=4 (Magisk common issues)
Easier than that...?
sentra10550 said:
I have a VS995 this is how I got my phone to finally take magisk and pass the safetynet check. I'm running software version VS99513A I performed dirty santa to get unlocked bootloader and root access...
...
...Hope this maybe help full to anyone having issues
Click to expand...
Click to collapse
If I may be so bold, I played around with the rooting process on mine (I have a VS995 on 13A, too), and found a much easier (and possibly cleaner?) way to do this. Of course, the way I'm about to suggest would require a full KDZ to stock and a factory reset...
Here's mine:
Follow this thread:
https://forum.xda-developers.com/v20/how-to/lgv20-vs995-verizon-aio-post-06-19-2017-t3624326
Note: For noobs: After step 13, it's a bit misleading, because it doesn't boot DIRECTLY into TWRP, but boots to the white-screen "stock" recovery. The trick is to tell it "Yes" to both reset prompts. (It doesn't actually reset your stuff.) After this, it will take you to the TWRP menu.
When you get to step 14E, DO NOT FLASH SuperSU!
Instead, flash the ReStock zip.
After flashing ReStock, follow step 14G, and then flash Magisk 13.3 (latest stable, haven't tested others) from here:
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
I tried this out of order a couple of other times and ended up either having Magisk not following through with install, or developing issues installing certain apps. (Either getting a -504 error from Play Store, or having valid APKs reply that they were "corrupt" when directly installing.)
Of course, all of the stereotypical disclaimers apply-- YMMV, and I'm not responsible if you brick your device, yadda yadda...
No offense, intended, sentra10550. While I'm glad you managed to get things working, the directions were a bit convoluted and I hope my humble findings might help yourself, in the future(?), and any others that may have a VS995.
Good luck, everybody!
)O( NeoHiPPy )O(
Think I'll wait until an easier method comes out for the VS995 to run Magisk lol..
I was UNABLE to do full unroot on my V20 from SuperSu settings menu. It would say "uninstallation failed"
I tried running UPDATE-unSU.zip from TWRP and it did not help. Magisk keeps on complaining about modified boot file.
I am unlocking boot loader, trying to flash Magisk in TWRP instead of SuperSu as per DirtyStanta root method instructions.
I will also flash restock 1.3 right after to stop static and vibration issue.
If it works, ill update my post.
---------- Post added 21st February 2018 at 12:28 AM ---------- Previous post was 20th February 2018 at 11:48 PM ----------
Ok i got it working. It was easier then i thought it would be.
These are the steps i did the very first time i got into TWRP after bootloaded unlock process as per DirtySanta rooting instructions.
Entered TWRP
DID NOT format data>yes
Installed Restock1.3 and Magisk.zip
Wipe cache and dalvik. Says Failed to wipe Dalvik (dont know why but what ever)
Reboot.
Result: Asking for unlock password 9 attempts left. So i have to Format Data>Yes
Re-entered TWRP
Format Data>yes
Reboot.
Root works. No SuperSu needed.
Conclusion:
You have to format DATA not for the root to work, but to be able to get into the phone. If there was a way to bypass that, there would be no need to factory reset to root. Root method would not require you to wipe the phone.
How ever, some apps that i use still do not support systemless root. They fail to do their work such as removing system apps. I cant remove any of my system apps for some reasons. I get "failed" messageevery time.
I was told i need modules for Magisk, but i have yet understood what that even means.
Other apps that use root, work fine. Such as AdAway.org

Help to root so far unsuccessful Telstra SM-G900I

G'day,
I have followed the instruction using the download on this page for SM-G900I without success. https://forum.xda-developers.com/showthread.php?t=2696537
I found another Telstra user who used the kltezt version, so I tried with the version from https://autoroot.chainfire.eu/ even though the build version is different. This time SuperSU asked to disable knox, I did so, verify with Root Checker, doesn't work. Reinstalled using Odin without auto reboot, SuperSU asked for New user or expert, I chose New User, nothing.
EDIT---
When using Root Checker it would ask for permission to verify, I would try and click button which would not work.
I have just uninstalled SuperSU and Root Checker worked. I have reinstalled SuperSU updated binary and restarted and now Root Checker fails.
Android: 6.0.1
AP: G900IDVU1CQD1
Any suggestions?
Samuel
G'day sir.
CF-Autoroot is the old method of rooting the S5 and it will fail in some cases because it is no longer updated. The current method of rooting the S5 is to use either the SuperSU zip from the SuperSU XDA thread or magisk from the Magisk thread. What's the difference? Magisk allows to hide root, superSU works better with some apps and with xposed.
Go to the TWRP website, locate the files for the G900F (klte) and download the latest version to your PC. Then flash the .tar file in ODIN under AP/PDA.
Immediately after flashing, you must reboot to recovery (hold power button, home button, volume up button) until you see "rebooting to recovery". Once in TWRP, flash the SuperSU or magisk zip then reboot.
All the best, Saber
Thanks for your reply. Though had to go do some hard Googling to fill in the gaps of the installation process, like adding the SuperSU zip to the memory card.
I was about to say it didn't work again, but then it clicked why I may not have been able to grant access in the past. I use the night overlay app "Twilight" and I know the system doesn't like it running when doing certain tasks and asks you to disable the overlay. I disabled Twilight and it worked. Double checked and it is definitely the problem. All that for probably nothing.
Now I can install apps to the external SD, well that's the plan anyway. I've had enough manually moving them over manually to make space.
Thanks once again for your assistance!
Samuel

Lost root access and can't get it back via Magisk. Help!

Galaxy S8 Exynos [SM-G950FD] Android Oreo 8.0.0
Hello. it's my first time posting here. So I've had a successful attempt at flashing TWRP and Magisk into my phone. Today I accidentally plugged in my charger while it was in the process of rebooting, so it entered my device into kind of a bootloop. I solved this by going into Download Mode and pressing 'Cancel', which prompted my device to successfully reboot and work again.
The problem is that I've somehow lost my root. None of my apps can get root access, CPU-Z says no root available, and Magisk Manager said "Magisk is not installed". Idk how I got to this because yesterday all was working, I assume it's because I got a bootloop or went into Download Mode.
I tried to install the official Magisk ZIP file from the Manager, go into recovery mode, and flash it via TWRP. Unfortunately this didn't work. This is the only solution I can come up with besides reflashing Stock and having to flash Magisk again and wipe all my current data. If anyone has any suggestions please comment down below as I'm kinda stuck rn. They would be greatly appreaciated!
bigbraintime said:
Galaxy S8 Exynos [SM-G950FD] Android Oreo 8.0.0
Hello. it's my first time posting here. So I've had a successful attempt at flashing TWRP and Magisk into my phone. Today I accidentally plugged in my charger while it was in the process of rebooting, so it entered my device into kind of a bootloop. I solved this by going into Download Mode and pressing 'Cancel', which prompted my device to successfully reboot and work again.
The problem is that I've somehow lost my root. None of my apps can get root access, CPU-Z says no root available, and Magisk Manager said "Magisk is not installed". Idk how I got to this because yesterday all was working, I assume it's because I got a bootloop or went into Download Mode.
I tried to install the official Magisk ZIP file from the Manager, go into recovery mode, and flash it via TWRP. Unfortunately this didn't work. This is the only solution I can come up with besides reflashing Stock and having to flash Magisk again and wipe all my current data. If anyone has any suggestions please comment down below as I'm kinda stuck rn. They would be greatly appreaciated!
Click to expand...
Click to collapse
Check out this guide. It may be of some use
https://www.didgeridoohan.com/magisk/HomePage
spawnlives said:
Check out this guide. It may be of some use]
Click to expand...
Click to collapse
Thanks. I tried the methods listed in the "Lost root randomly" section and unfortunately they didnt work. Do you have any other ideas? Maybe I could "Select and Patch a File" in Magisk's Install but afaik Magisk doesnt have its img./tar. file.
I should probably just flash a fresh stock and redo the root process, but then my data will be wiped and I dont really want that lol
bigbraintime said:
Thanks. I tried the methods listed in the "Lost root randomly" section and unfortunately they didnt work. Do you have any other ideas? Maybe I could "Select and Patch a File" in Magisk's Install but afaik Magisk doesnt have its img./tar. file.
I should probably just flash a fresh stock and redo the root process, but then my data will be wiped and I dont really want that lol
Click to expand...
Click to collapse
Have you tried the uninstaller through magisk or twrp then try again with magisk.
When trying to re-install magisk do you get any errors.
https://github.com/topjohnwu/Magisk/releases
Also if worried about losing apps/data do a backup before trying anything.
The easiest way is to flash firmware and start from scratch again but backup first.

Categories

Resources