Just tried to flash Xposed on here using the Samsung-based one from Arter. Now that phone doesn't allow me to boot past the flashing android logo. Should I flash the uninstaller via recovery ("update via SD card"), or completely wipe the ROM, go back to NCG(I think), and then reflash it? I'm kinda at a lost at home I should handle this. I've heard that I shouldn't flash anything via the stock recovery on FlashFire-based roms.
You can't flash anything via the stock recovery. I recommend using Safestrap--read about it.
To make sure everything works completely on any firmware, I recommend doing the following:
Flash this with odin, boot the phone and go through the setup wizard:
https://www.androidfilehost.com/?fid=24052804347794178
Then, reboot to download mode again and flash this:
https://www.androidfilehost.com/?fid=24052804347776876
After it boots, root it with towelroot, install busybox, then install safestrap. There are directions posted already for this.
Look for jrkruse's "rooting tools for sdcard" zip and install it after you reboot into safestrap. Then you can wipe and install your rom and the firmware and never have to use odin again. You reinstall that zip after installing the ROM to get the apps for using safestrap without odin, also.
Related
Hey Guys,
I just rooted my i9505 via CF-Auto-Root and it worked like a charm. The next thing I did was to flash Philz Recovery, at first it auto reboot and it never went into recovery, so I followed the steps to re-flash it without the auto reboot and force it into recover. It loaded into Philz Recovery perfectly fine, now when I reboot, it gave me the option to disable auto flash recovery, so I selected yes.
After that I was never able to get into Recovery Mode ever again. All it does is says Recovery Booting in the top left corner and then restarts and loads into the OS. I followed the steps again to re-flash Philz with auto reboot unchecked and it still failed to get into recover. I then tried CWM and TWRP (via Odin), but all of these gave me the same problem and failed to get into recover.
I then tried SGS4 Flasher but still the same question.
Anyone here who has this problem before and know the fix or is able to recommend another method?
Was able to fix it. Had to flash the original stock Recovery back on and then re-flash a custom recovery. Not sure what happen but was able to install TWRP on without an issue, maybe something in Philz Recovery that stuffed it up.
OK! Looks like it is not working correctly. For me to get access to a custom recovery, I have to flash the stock recovery via Odin and then flash a custom recovery to get it working EVERYTIME. It will boot into Philz, CWM and TWRP only once, then you need to flash stock recovery and do the process all over again.
So it looks like the recovery gets over written each time even if you select "yes - disable flash recovery" in Philz Recovery. Anyone know of another way to disable flash recovery?
Z-Blade said:
OK! Looks like it is not working correctly. For me to get access to a custom recovery, I have to flash the stock recovery via Odin and then flash a custom recovery to get it working EVERYTIME. It will boot into Philz, CWM and TWRP only once, then you need to flash stock recovery and do the process all over again.
So it looks like the recovery gets over written each time even if you select "yes - disable flash recovery" in Philz Recovery. Anyone know of another way to disable flash recovery?
Click to expand...
Click to collapse
with a root explorer, go to system/recovery-from-boot.p and rename it to recovery-from-boot.p.bak
samersh72 said:
with a root explorer, go to system/recovery-from-boot.p and rename it to recovery-from-boot.p.bak
Click to expand...
Click to collapse
Thanks for responding samersh. To lessen the pain of constantly flashing the recovery via Odin on my PC, I bought Mobile Odin Pro. However, it looks like when I flashed using Mobile Odin Pro, it fixed my issue.
I checked \System\ and there was no recovery-from-boot.p there. So it is confirmation that this has been fixed. Thanks again for responding.
Having some issues getting a recovery to be flashed on this new device, I am not use to a phone that when rooted doesn't have some stock recovery that actually works. And by that I mean, allows me to install zip from file. All I get is the option to reboot, flash from adb, install from external, wipe factory reset, wipe cache, and install from cache.
Sorry if this has been asked a few times before, but with my searching I didn't find any one answer that solved my problem. Tried flashing a recovery via odin but it said Auth fail for the recovery. Going to try a few other things and see what I can come up with.
Thanks in advanced!
What recovery are you trying to flash? I believe the closet thing we have to a custom recovery is safestrap. Is that what your trying to install?
Ysosrslawl said:
Having some issues getting a recovery to be flashed on this new device, I am not use to a phone that when rooted doesn't have some stock recovery that actually works. And by that I mean, allows me to install zip from file. All I get is the option to reboot, flash from adb, install from external, wipe factory reset, wipe cache, and install from cache.
Sorry if this has been asked a few times before, but with my searching I didn't find any one answer that solved my problem. Tried flashing a recovery via odin but it said Auth fail for the recovery. Going to try a few other things and see what I can come up with.
Thanks in advanced!
Click to expand...
Click to collapse
It sounds like you flashed philz touch recovery witch will not work with the VZW S5 you need to flash SafeStrap Recovery. You might need to Odin back to stock and re root your device to get it back to normal first.
chrisbass said:
What recovery are you trying to flash? I believe the closet thing we have to a custom recovery is safestrap. Is that what your trying to install?
Click to expand...
Click to collapse
I didn't flash anything when I first started rooting the phone I just used towelroot, then when the OTA messed it up I went and did the NCG to NE9 method using odin and towelroot. But every time I went into recovery, it has been the same. It wasn't until I used the toolkit from the forums that installed safestrap and busybox did I actually get a different recovery, but even if I reboot into recovery it still takes me to the stock one first and then on reboot i can access safestrap.
Yes, that's how safestrap works, through a process called "bootstrapping". It never replaces your stock recovery so when you boot into recovery it'll always be stock but upon boot you'll be presented with the safestrap option.....totally normal
On another note, my Supersu binaries wont update so I'm going back to stock anyway. I think I may leave it at stock for a while until I see some more ROMs come out.
Ysosrslawl said:
On another note, my Supersu binaries wont update so I'm going back to stock anyway. I think I may leave it at stock for a while until I see some more ROMs come out.
Click to expand...
Click to collapse
Your other option is what I have done. I first went the safestrap route but installed rom on rom slot before finding out about the bugz in safestrap. So I odined back to stock. Instead of installing something with bugz in it I rooted, installed supersu and Xposed framework with some modules. Wanam module gives you most of the customizations found in custom roms. Tons of other modules for pretty much anything you want to tweak. Works like a champ on stock system.
Hi,
i wanted stock android on my s4 and downloaded cm11 and installed using the easy installer thing. Cm11 was not as great as i thought and was looking at the GPE rom.
I have the zip file downloaded for the GPE , just wondering to complete
do i need odin and if so what v?
do i need root?
Do i need CWM?
Im new to downloading and installing roms but i am a quick learner
Thanks
Every time you want to flash a custom rom you will require root and a custom recover (Like CWM, TWRP or PhilZ).
There are a few cases where you need Odin to flash the rom. But for the GPE rom you will need just a custom recovery and root.
Considering you have already installed a custom rom (although with the cyanogenmod installer) you should be rooted and maybe have a custom recovery.
Here is a root guide just in case.
But if you have an app like SuperSU, then you're rooted.
Then you still need a recovery. I don't know if the CM installer flashes one.
I myself use TWRP recovery. Because CWM just didn't work.
Used Nandroid manager (from google play) to flash TWRP because everything else failed.
If you don't have a custom recovery, then you can flash TWRP. I haven't tested the other recoveries on this device.
Go here and download the latest .img file.
Then you will use Nandroid manager to flash that img file. Then select "reboot into recovery".
Now you should have TWRP flashed. In case Nandroid says that you need to download busybox from google play, do that and install it. But CM should have busybox installed already.
Now put the rom zip on the external or internal storage. Boot into recovery, go to the Wipe tab and do a factory reset.
Then go to Install and select the zips you want to flash. This is how you basically flash a rom.
Some roms may require you to do some other stuff. So make sure you check the rom flash instructions.
nandroid is saying ,the file .... can not be flashed by this app , i checked if i was rooted by downloading a root checker and it said yes... what am i doing wrong?
nevermind, i used CWM instead and worked perfectly, couldnt have done it without you!!! Thanks
CWM didn't work for me.
But if it works for you, I guess it's alright
I have searched and can not seem to find a solution
Here is where I am at:
Odin back to stock 4.4.2
Root with Towel Root
Install SuperSU, Update, and Disable KNOX
Install busy box
Install SafeStrap
Install Recovery
Boot into SafeStrap Recovery
Create Backup, Create a Partition and active Rom Slot 1
Wipe System, Cache, Data
Install Zip via External Card
Install goes perfect every time
Reboot
Phone gets stuck on the "Samsung Galaxy S5" screen
I can get into the stock recovery (not safestrap) and Download Mode
I then Odin back to stock and try again
I have tried 4 times and 4 different Roms. Has to be something I am missing
would using Flashfire possibly fix this?
EDIT:
Current set up
Android 4.4.2
Kernal 3.4.0
Build KOT49H.G900VRU1ANCG
update: Same problem with flashfire....
update 2: Could have been bad/wrong kernel. Going to odin to 5.0 and see what happens
67speeda said:
I have searched and can not seem to find a solution
Here is where I am at:
Odin back to stock 4.4.2
Root with Towel Root
Install SuperSU, Update, and Disable KNOX
Install busy box
Install SafeStrap
Install Recovery
Boot into SafeStrap Recovery
Create Backup, Create a Partition and active Rom Slot 1
Wipe System, Cache, Data
Install Zip via External Card
Install goes perfect every time
Reboot
Phone gets stuck on the "Samsung Galaxy S5" screen
I can get into the stock recovery (not safestrap) and Download Mode
I then Odin back to stock and try again
I have tried 4 times and 4 different Roms. Has to be something I am missing
would using Flashfire possibly fix this?
EDIT:
Current set up
Android 4.4.2
Kernal 3.4.0
Build KOT49H.G900VRU1ANCG
Click to expand...
Click to collapse
I think the problem may be you are trying to use the ROM slot. I thought I read that you are supposed to flash ROMs in the stock slot with safestrap.
Thank you for the help
I fixed it but not really sure how.
I THINK it was messed up because I had the wrong Kernel
Here is what I did:
Flashed latest Lollipop with Odin (on parrells on a Mac, worked really well)
Followed the KingRoot Guide to root phone
After a few attempts got root back
Installed the Rom suggested in the the Kingroot Thread
Found some script on XDA to debloat
I really wanted to try the toxic rom but going to play it safe for now...
ROM slot 1 is your problem, as it isn't supported on our devices.
Flash to stock slot only. Ignore the ROM slots.
If you did indeed have the wrong kernel flashed, you would never successfully boot.
Sometimes you also have to wipe cache and dalvik cache again after installing a ROM.
EDIT:
Please delete thread. There is an issue with my SD card resulting in files being corrupted. Massive losses. I was able to successfully install ROM by uploading files to Internal Storage
Hello,
I have been attempting to flash AryaMod : http://forum.xda-developers.com/galaxy-note-3/development/rom-aryamod-v1-3-tw-lollipop-5-1-1-t3326976/post67619860#post67619860
on my SM-N900W8. From the stock rom, I rooted it using CF-Auto-Root, then installed TWRP.
After downloading and putting all the necessary files on my SD Card, I attempted to install this but TWRP kept giving me file errors "Error: Secure Check Fail : aboot" when attempting to install anything, the kernel, the rom, the bootloader and modem, etc. Nothing was working.
I read that TWRP isn't very good with Aroma stuff and I should be using CWM, so I attempted to install that. Everytime I installed CWM, it would say it is going into recovery, then restart the phone, over and over..
Figured that I needed to just do a fresh install. I get a new Stock Lollipop 5.0 DOH1 from Kies, reroot with CF-Auto-Root, then install CWM from ROM Manager. Same thing, recovery bootloops.
Is there a way to fix either CWM or to get Aryamod to work with TWRP? Is the CF-Auto-Root breaking the recovery install since it installs through recovery as well?
At this point I've spent an entire day trying to get Aryamod with no luck. What the heck am I doing wrong?