Hi,
I've got firmware B132 (ALE-L21 V100R001C432B132). Today, in this thread I found version B133.
Afer upgrade this firmware is presented as ... BalongC50B311
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The question is - how can I downgrade to B132 safefy?
chato.pl said:
Hi,
I've got firmware B132 (ALE-L21 V100R001C432B132). Today, in this thread I found version B133.
Afer upgrade this firmware is presented as ... BalongC50B311
The question is - how can I downgrade to B132 safefy?
Click to expand...
Click to collapse
I have exact the same issue.......and I have one more........ it changed the Model number to hi6210sft (!!)
Please someone to help!!
I did it - back to B132
I unpacked (via Huawei Update Extractor) file UPDATE from firmware B052.
Then, I turn bootloader mode (Power+VolumeDown) and run:
Code:
fastboot flash system system.img
[ reset device ]
Code:
fastboot flash recovery recovery.img
[ reset device ]
Code:
fastboot flash boot boot.img
[ reset device ]
Code:
fastboot flash cust cust.img
After reset I had installed firmware B052 and B132 ready to upgrade.
chato.pl said:
I did it - back to B132
I unpacked (via Huawei Update Extractor) file UPDATE from firmware B052.
Then, I turn bootloader mode (Power+VolumeDown) and run:
Code:
fastboot flash system system.img
[ reset device ]
Code:
fastboot flash recovery recovery.img
[ reset device ]
Code:
fastboot flash boot boot.img
[ reset device ]
Code:
fastboot flash cust cust.img
After reset I had installed firmware B052 and B132 ready to upgrade.
Click to expand...
Click to collapse
Hi chato.pl
You did all that with bootloader unlocked I suppose......
Eventhough, because I'm new on this, I don't know how to use *.img files from Huawei updater extractor.
Can you help me on that?
Thank you
Dmt75GR said:
Hi chato.plYou did all that with bootloader unlocked I suppose......
Click to expand...
Click to collapse
Yes, of course
Dmt75GR said:
Eventhough, because I'm new on this, I don't know how to use *.img files from Huawei updater extractor.
Can you help me on that?
Click to expand...
Click to collapse
You must have installed on your computer (PC) Minimal ADB and Fastboot.
Then, copy these 4 *img files to directory "Minimal ADB..." and execute commands as I wrote.
I have the same problem with version and after sending email to huawei they answered: "Please apply the unlock code in our website huawei. com/en/plugin.php?id=hwdownload&mod=list ". I create an account using email and when i try to get unlocking code gave me an error "Sorry, you must use a phone account to submit this application." . How do you get unlocking code?
ratoiu2001 said:
I have the same problem with version and after sending email to huawei they answered: "Please apply the unlock code in our website huawei. com/en/plugin.php?id=hwdownload&mod=list ". I create an account using email and when i try to get unlocking code gave me an error "Sorry, you must use a phone account to submit this application." . How do you get unlocking code?
Click to expand...
Click to collapse
Find on YouTube movie named: "How to Unlock the bootloader on your Huawei Android device P8 Lite"
(I'm noobie here, I can't to paste link here yet)
ratoiu2001 said:
I have the same problem with version and after sending email to huawei they answered: "Please apply the unlock code in our website huawei. com/en/plugin.php?id=hwdownload&mod=list ". I create an account using email and when i try to get unlocking code gave me an error "Sorry, you must use a phone account to submit this application." . How do you get unlocking code?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=62638207
chato.pl said:
I did it - back to B132
I unpacked (via Huawei Update Extractor) file UPDATE from firmware B052.
Then, I turn bootloader mode (Power+VolumeDown) and run:
Code:
fastboot flash system system.img
[ reset device ]
Code:
fastboot flash recovery recovery.img
[ reset device ]
Code:
fastboot flash boot boot.img
[ reset device ]
Code:
fastboot flash cust cust.img
After reset I had installed firmware B052 and B132 ready to upgrade.
Click to expand...
Click to collapse
I click step by step and not working ;/ Soft after downgrade = BalongV100R001C50B311
If dial *#*#2846579#*#* Network Information Query -> Vendor Country Info -> Vendor: file not exist , Country: file not exist ;/ I have problem with Vendor, Country - file not exist - it's region problem on my phone? How to fix it? Please help ;/
PS: i find this russian forum & this topic h t t p ://4pda.ru/forum/index.php?showtopic=683902&st=140#entry41879742, but i don't understand this languange
Here, tutorial in Polish
http://forum.android.com.pl/topic/247651-p8-lite-ale-l21-powrót-do-softu-b052/
chato.pl said:
Here, tutorial in Polish
Click to expand...
Click to collapse
i know, but is not work on my device ;/ After this tutorial i have firmware BalongC50B311 and i lost Vendor/Country file in Network Information Query -> Vendor Country Info (maybe that is the problem)...
It work this solution: http://forum.xda-developers.com/showpost.php?p=62834747&postcount=39
chato.pl said:
I did it - back to B132
I unpacked (via Huawei Update Extractor) file UPDATE from firmware B052.
Then, I turn bootloader mode (Power+VolumeDown) and run:
Code:
fastboot flash system system.img
[ reset device ]
Code:
fastboot flash recovery recovery.img
[ reset device ]
Code:
fastboot flash boot boot.img
[ reset device ]
Code:
fastboot flash cust cust.img
After reset I had installed firmware B052 and B132 ready to upgrade.
Click to expand...
Click to collapse
Same procedure to come from another firmware ? (B136 dual SIM) for example?
Hello.
One simple question. When I was trying to downgrade my phone, while trying to flash the system.img, the minimal adb said that the file was too big.
How can I proceed?
You have to flash the boot, the cust, the recovery and the system in this orders.
How to downgrade or change B170 to B171? I had G Elite ALE-L23 (single sim), then update to ALE-L21 B170, but I want to update to to MM 6.0 single sim, any guide for this?
P8Lite ALE-L21 HUAWEI Firmware up and downgrades
Hello Developers!
Many many users wrote in the internet that they ran into trouble by upgrading or downgrading firmware on the p8lite device. Actually I want to update from B188 to B524 (Testing Android 6!) but after that I want to go back before my B188 cause I need functions which goes lost after updating to B188, like knockon Feature. The best for me would be a twrp image with the boxed firmware of my phone!
1. Where can I get the Information over which versions I have to go? Is there a version list for specific firmware types? For example - I want to have a list for dual sim European C432XXXimages so that I can see the first to actually launched firmware versions. I don't want to read hundreds of tutorials to find out the right ones.
2. What happens if I use a wrong version number and the phone strikes? Can I got it back to life then? Is twrp working in that case? Or can dload remove the recovery twrp as well?
3. What is with the unlocked boot-loader and root status? I read that users got error messages in the firmware update processes like "Your boot-loader is unlocked, installation aborted" or with other words saying the same. When I have to relock the boot-loader or unroot my handy before upgrading/downgrading firmware versions - or is it not nessessary?
Are there anywhere twrp image downloads for p8lite ALE-L21 which contains the originally boxed firmware?
4. Can I get the HUAWEI recovery back on my phone and remove the twrp?
Thanks for help!
Kind Regards,
Marcel
chato.pl said:
I did it - back to B132
I unpacked (via Huawei Update Extractor) file UPDATE from firmware B052.
Then, I turn bootloader mode (Power+VolumeDown) and run:
Code:
fastboot flash system system.img
[ reset device ]
Code:
fastboot flash recovery recovery.img
[ reset device ]
Code:
fastboot flash boot boot.img
[ reset device ]
Code:
fastboot flash cust cust.img
After reset I had installed firmware B052 and B132 ready to upgrade.
Click to expand...
Click to collapse
hope this works to downgrade to C432B560 since B575 did indeed break something that gamevil dislike, i got xign error code
hi !
can you help me ? i have a P8 lite single sim ale l21 on 6.0 and emui 4.03. Balong c52b311... I flashed system,boot,recovery and cust of ALE-L21C432B601 but i still on 6.0 and emui 4.03 ?
How i can flash new firmware ?
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This thread is a placeholder for all possible firmwares we can get from official HTC OTA's.
Your CID number must be exactly the same. If it's written "HTC__001" it means you can't flash it, if your CID is "02__001". The whole text must match!
How To: Find the proper firmware variant for the HTC device
How To: Flash firmware package on the HTC device
Please READ this small F.A.Q. before continuing!
What is firmware.zip?
Firmware.zip is a part of each OTA update from HTC. It contains important part of the firmware like radio, bootloader, recovery, kernel etc..
Why it's important to flash firmware.zip and when should I flash it?
It is recommended to have flashed latest firmware on your device for best modem performance and system stability. Sometimes it's necessary to have latest bootloader flashed because otherwise your device might not work well with new system update.
Does firmware.zip contains radio?
Yes, it does contain radio, and for S-ON devices the only method to update radio is to flash latest firmware.zip
Why it's important to flash it before flashing custom ROM?
Because firmware.zip contains boot.img (ramdisk and kernel) that will replace custom boot.img from any custom ROM you have. That's why you have to flash firmware.zip first, because otherwise boot.img will be overwritten with stock one.
If you already flashed firmware.zip after flashing custom ROM, just flash this particular custom ROM again.
Does firmware.zip contains recovery?
Yes, it does contain recovery image, that's why after flashing firmware.zip you will have to flash custom recovery again, to be able to flash custom ROM afterwards.
Can I flash this firmware.zip on any HTC One?
Not if your device is S-ON. To be able to flash it on S-ON device, your modelid (example: PN0710000) and cidnum (example: HTC__001) must match the firmware.zip version you are about to flash.
If my modelid or cidnum doesn't match, can I brick my device if I try to flash firmware.zip anyway?
As long as your device is S-ON flashing firmware.zip with non matching modelid or cidnum will result in error and nothing will be flashed, so there is no risk of brick.
Do I need to have locked, unlocked or relocked bootloader to be able to flash firmware.zip?
Your bootloader needs to be relocked.
If I can't flash newest firmware.zip because of wrong modeid (MID) or cidnum (CID) does it mean I can't use custom ROM based on the latest HTC update?
In most cases you should be able to run any custom ROM as long as hboot update is not mandatory.
What if there is no firmware.zip for my MID/CID?
Try to find latest OTA update for your original stock ROM and send it to me. I will post firmware.zip here.
How to flash?
(bootloader needs to be relocked)
If you are S-ON ---> Re-lock your bootloader (this will most probably wipe content of your device)
If you are S-OFF ---> no need to re-lock the bootloader.
Copy downloaded .zip to fastboot.exe location (e.g. c:/SDK/platform-tools/fastboot.exe)
Re-name .zip file to firmware.zip
Open command prompt
Boot your device in fastboot mode (vol down + power ===> fastboot)
Connect device to the PC
In command prompt cd to fastboot.exe location
Make sure you have correct modeid and cidnum (type: fastboot getvar all)
Type: fastboot oem lock (if your device is not relocked yet or in case it's S-ON)
Type: fastboot oem rebootRUU and wait for device to reboot
Type: fastboot flash zip firmware.zip and wait for process to complete
Sometimes flashing for the first time doesn't work, so flash firmware.zip again just to make sure.
Type: fastboot flash zip firmware.zip and wait for process to complete
Type: fastboot reboot
Unlock your bootloader and flash custom recovery if you are going to use custom ROM.
RUUs variants:
Click here
thxs mate.
Just got my M8 today, managed to grab the 1.54.401.5 OTA zip. Thought I'd post the firmware zip here
1.54.401.5 firmware
Code:
HBOOT 3.16.0.0000
RADIO 1.15.2133156.UA13G
OS 1.54.401.5
this wont require me to factory reset right? i can never remember this like an idiot :silly:
fisha21 said:
Just got my M8 today, managed to grab the 1.54.401.5 OTA zip. Thought I'd post the firmware zip here
1.54.401.5 firmware
Code:
HBOOT 3.16.0.0000
RADIO 1.15.2133156.UA13G
OS 1.54.401.5
Click to expand...
Click to collapse
Can you post the recovery as well?
SaHiLzZ said:
Can you post the recovery as well?
Click to expand...
Click to collapse
It's all in the first post...
nvm...i just did it and got my answer...
flaSHINg now but have :
remote 12 signature verify fail
hello... so I found my mode is 0P6B70000 and my cid is SPCS_001.. Will this work for my phone? if not what I really need is jus a way to flash back to stock since I screwed up my phone so bad that most of my stuff doesn't work.. I am rooted/unlocked/s-on.. thankx for any help in pointing me in the right direction
---------- Post added at 12:51 AM ---------- Previous post was at 12:46 AM ----------
l1ttl3z said:
hello... so I found my mode is 0P6B70000 and my cid is SPCS_001.. Will this work for my phone? if not what I really need is jus a way to flash back to stock since I screwed up my phone so bad that most of my stuff doesn't work.. I am rooted/unlocked/s-on.. thankx for any help in pointing me in the right direction
Click to expand...
Click to collapse
just read this again and I now know that this will not work for me.. I think I found a sys dump under sprint section.. Is that something that I can just flash with twrp and have my stock rom back?
jonata said:
flaSHINg now but have :
remote 12 signature verify fail
Click to expand...
Click to collapse
fastboot getvar all
Sent from my HTC One
l1ttl3z said:
hello... so I found my mode is 0P6B70000 and my cid is SPCS_001.. Will this work for my phone? if not what I really need is jus a way to flash back to stock since I screwed up my phone so bad that most of my stuff doesn't work.. I am rooted/unlocked/s-on.. thankx for any help in pointing me in the right direction
---------- Post added at 12:51 AM ---------- Previous post was at 12:46 AM ----------
just read this again and I now know that this will not work for me.. I think I found a sys dump under sprint section.. Is that something that I can just flash with twrp and have my stock rom back?
Click to expand...
Click to collapse
also: fastboot getvar all
Sent from my HTC One
@mike1986., will the Asian 2.5Ghz variant be compatible with all the roms and firmware of the 2.3Ghz US variant?
Can you add the cid O2___102?
ChronoWerX said:
Can you add the cid O2___102?
Click to expand...
Click to collapse
Did you get your phone from O2 Germany? As more as I read about CID and the other stuff, as more confused I am. Got my phone from O2 and have CID O2___001...have operators in one country also different CIDs? Which firmware you use?
Deleted. Wrong info
From what i have seen before you can have different cids but with the same main version number.
If i say this correctly the CID corresponds with regions, so basically you can have different cids yes.
Correct me if i am wrong please
shorty1483 said:
Did you get your phone from O2 Germany? As more as I read about CID and the other stuff, as more confused I am. Got my phone from O2 and have CID O2___001...have operators in one country also different CIDs? Which firmware you use?
Click to expand...
Click to collapse
O2___001 is for O2 UK
My is a O2 DE device
ChronoWerX said:
O2___001 is for O2 UK
My is a O2 DE device
Click to expand...
Click to collapse
But my device is also from O2 Germany...why they sell O2 UK devices?
In store stock problems maybe ?
Mr Hofs said:
In store stock problems maybe ?
Click to expand...
Click to collapse
Nevermind...also got O2___102...dunno whats wrong with me today.
What is the dev edition Cid?
Sent from my HTC6525LVW using Tapatalk
For those who are stuck at bootlogo, the problem is the same as the one when we tried before downgrading from 4.4.4 to 4.4.2 it is with the partition table, the version in the ota is older that the one we have on our devices, I dunno how the hell is that but it is what happened to most of us, though the easy fix, flash the attached gpt through fastboot command:
fastboot flash partition gpt.bin
Hope this fixed everything
Thanks very much for the information!
I recently tried flashing the 4.4.4 GPE firmware onto my XT1032 and I got an error when trying to flash the GPT.bin partition using mfastboot. It said "failed". I got nervous and went back to the retail US firmware just in case. We need more people to confirm that this fix will work.
OP do you know if it's safe to flash your GPT partition before installing the OTA update on the 4.4.4 GPE ROM?
It works!
I cant flash any rom to my phone and everything failed on half proces and with this file i rescued my phone i flashed 4.4.4 gpe and than 5.0.1 ota (by sideload) !
My Moto Gpe was brick!! And now it works again!!!! Thanks!!!!
Yes I can confirm, I faced this issue myself and used this fix for it )
Yeah!!! this work very well, you save my phone, thanks man
seriusly that was all? i had 2 moto g at home and when the first one got the ota it got hard bricked, but stupid me got back to 4.4.2 and at the 4.4.4 ota the phone hard bricked, i think that the bootloader is corrupted and now i have to wait for the full 5.0 rom to be aviabable. Thanks man i appreciate it (i had another moto g and just got the ota and booted because of this)
can't use that, i've got the 41.18 bootloader so i have to wait a 5.0 original firmware :/
or am i doing something wrong?
Bad news
ssalamon said:
can't use that, i've got the 41.18 bootloader so i have to wait a 5.0 original firmware :/
or am i doing something wrong?
Click to expand...
Click to collapse
We have the same problem fella. We must wait the firmware with the image of new bootloader...Maybe in one month we take a solution...
So, with new bootloader is not possible to apply OTA. I have received 5.0.1 OTA on my 4.4.4 GPE converted XT1032, but this failed to start after latest try to update
sebadomaitis said:
We have the same problem fella. We must wait the firmware with the image of new bootloader...Maybe in one month we take a solution...
Click to expand...
Click to collapse
The original GPE firmware has a bootloader version older than that of the 4.4.4 "again I don't know why" the only fix is by flashing the gpt file included, if you flashed the android lollipop and it didn't work, flash this and give it a shot .
"bear in mind also that this fix is for devices stuck at bootlogo not bootanimation, not a fix for bootloop"
ruphert said:
So, with new bootloader is not possible to apply OTA. I have received 5.0.1 OTA on my 4.4.4 GPE converted XT1032, but this failed to start after latest try to update
Click to expand...
Click to collapse
I faced exactly what you are facing now, flash this and everything will go smooth
Rostomania said:
I faced exactly what you are facing now, flash this and everything will go smooth
Click to expand...
Click to collapse
Thanks for you reply. After sideload 5.0.1 and stucking and google logo should I flash only your gptfix.zip and reboot?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Phone is stucking after reboot.
ruphert said:
Thanks for you reply. After sideload 5.0.1 and stucking and google logo should I flash only your gptfix.zip and reboot?
Phone is stucking after reboot.
Click to expand...
Click to collapse
No man, do the following:
1- Reboot Into bootloader and connect your device via usb.
2- In your adb folder paste the gpt file I included and press right click and shift in any white space in the folder and choose start command prompt.
3- type fastboot flash partition gpt.bin and your problem should be fixed.
Rostomania said:
No man, do the following:
1- Reboot Into bootloader and connect your device via usb.
2- In your adb folder paste the gpt file I included and press right click and shift in any white space in the folder and choose start command prompt.
3- type fastboot flash partition gpt.bin and your problem should be fixed.
Click to expand...
Click to collapse
Thanks a lot, you rocks!
Code:
sudo fastboot flash partition gpt.bin 12:02
target reported max download size of 536870912 bytes
sending 'partition' (32 KB)...
OKAY [ 0.036s]
writing 'partition'...
(bootloader) This may take a few seconds, if a
(bootloader) different partition table is being
(bootloader) flashed since we need to backup
(bootloader) and restore a few partitions
(bootloader) Flashing primary GPT image...
(bootloader) Flashing backup GPT image...
OKAY [ 0.320s]
finished. total time: 0.356s
sudo fastboot reboot
Phone is booting now
boot stuck
Hi, I've stucked on "android logo with unlocked lock icon".
Originally I had xt1033 asian, which was converted to 4.4 GPE one sim. Today I've tried to flash the 5.0.1 lollipop via adb, and as many of you guys, stucked on boot.
I've already tried your fix, and tried to downgrade following this thread http://forum.xda-developers.com/moto-g/general/guide-xt1033-downgrade-lollipop-5-0-to-t2969729
but still phone doesn't boot, just "Google" and lock icon...
can you help me, at least boot it, android version doesn't metter
** UPDATE **
So, I've managed to boot phone thatks to this thread http://forum.xda-developers.com/moto-g/general/guide-restore-softbricked-phone-t2965459
Gonna make a backup and try installing 5.0.1 again
sebadomaitis said:
We have the same problem fella. We must wait the firmware with the image of new bootloader...Maybe in one month we take a solution...
Click to expand...
Click to collapse
Not exactly, my XT1033 had 41.18 bootloader when i applied the 5.0.1 ota, it just worked with the following tutorial. I didn't even use the gpt file here.
http://forum.xda-developers.com/moto-g/general/guide-convert-brazilian-firmware-gpe-5-t2969472
awesome.. this works like wonder.. but now i am not getting the network .. any idea what to do?
ghost9685 said:
awesome.. this works like wonder.. but now i am not getting the network .. any idea what to do?
Click to expand...
Click to collapse
Look at this tread
http://forum.xda-developers.com/moto-g/general/gpe-ota-lrx21z-5-0-1-xt1033-xt1032-t2969847
1st post
Step 5
Maybe it could work
My Own devices is a XT1032, and this fix has nothing to do with the XT1033 converted to GPE .
I can also confirm that this works. But my phone was already converted to GPE and had 4.4.4 before I did the OTA update.
Giovani's guide works if you're stuck on the bootlogo after updating to 4.4.4 and then lollipop through OTA (on a gpe converted device of course). I used the second method in that thread.
Hello, i have a problem flashing custom recovery TWRP on ZUI.
below are the details of the problems:
ZUI Version: 1.2.040
Unlock Bootloader: YES (I feel a bit sketch on this part, because the process does not wipe any data)
Custom recovery to be installed: Un-Official 2.8.7.0 TWRP Recovery for ZUK Z1 by Breadcrust
1. when i try to flash the recovery on fastboot mode, it gives me this:
writing 'recovery'...
FAILED (remote : Invalid data)
finished. total time" 0.418s
2. when i try boot the recovery on fastboot mode, it also gives error:
downloading 'boot.img'...
OKAY [0.362s]
booting...
FAILED (remote: bootimage: incomplete or not signed)
finished. total time: 0.369s
* For the solution, i have tried kingroot to allow root access ---> NOT SUCCESFULL
** For 2nd solution, i have tried downgrading the ZUI version ----> NOT SUCCESFULL (cannot get into qdloader mode long enough).
*** I also have tried re-downloading the recovery image without using download accelarator (IDM) ---> NOT SUCCESFULL
edit: please... if somebody know the problem, please teach me how to overcome the problem. thank you (* sorry bad english)
Unlock your bootloader and retry.
Already retried to unlock the bootloader.. But no luck.. Thanks for the tips btw
I have found the solution.. I will post it in the weekend
luqmanhans said:
I have found the solution.. I will post it in the weekend
Click to expand...
Click to collapse
when u post please tell my in the praivte
[email protected]
Kingroot worked for me bit only after the second try
Tengo10 said:
Kingroot worked for me bit only after the second try
Click to expand...
Click to collapse
can u explain me please how u do it with king root??
eyalyagel said:
can u explain me please how u do it with king root??
Click to expand...
Click to collapse
I coud've offered more direct support if you messaged me or replied to my thread.
Have you found any solution?
Breadcrust said:
I coud've offered more direct support if you messaged me or replied to my thread.
Click to expand...
Click to collapse
can u give me please the link or explain may the way????
thank u very much
eyalyagel said:
can u give me please the link or explain may the way????
thank u very much
Click to expand...
Click to collapse
Did you do fastboot -i ox2b4c oem unlock?
Breadcrust said:
Did you do fastboot -i ox2b4c oem unlock?
Click to expand...
Click to collapse
yes,
FAILED (remote: Oem unlock is not support)
finished. total time: 0.008s
and i allow the oem in the developer option....
also i have the same phone in my home but the difrrent bitween them:
1. have only home press in the bottom
the ather phone have home, back,manu, bottom this phone can be unlocked and i sucsses to instal twrp
I have the same problem like it desribed by the OP.
I have the chinese version of the ZUK.
The Bootloader seems to be unlocked. When i check it, it says Unlocked: true.
When i did the Unlock, it didnt wipe something. When I do the unlock, it says ok, but there is no reboot.
But somehow, i cant boot or flash a recovery. Every time I have the error, Invalid data or not signed.
Root does also not work.
I have the latest version of ZUI installed. Is this the problem?
I read the problem several times, but nobody posted a solution for this.
xnoobx said:
I have the same problem like it desribed by the OP.
I have the chinese version of the ZUK.
The Bootloader seems to be unlocked. When i check it, it says Unlocked: true.
When i did the Unlock, it didnt wipe something. When I do the unlock, it says ok, but there is no reboot.
But somehow, i cant boot or flash a recovery. Every time I have the error, Invalid data or not signed.
Root does also not work.
I have the latest version of ZUI installed. Is this the problem?
I read the problem several times, but nobody posted a solution for this.
Click to expand...
Click to collapse
I'm also facing the same problem with my ZUK Z1
ZUI 1.2 locked the bootloader.If the TWRP recovery image file is twrp.img,You can try to do these:
Code:
fastboot -i 0x2b4c boot twrp.img
then you will boot into a temporary TWRP recovery.Now you can do everything here utill it reboots or shutdown.
if you want to flash a permanent recovery, I suggest to you to convert your ZUI to COS.
hfutxqd said:
ZUI 1.2 locked the bootloader.If the TWRP recovery image file is twrp.img,You can try to do these:
Code:
fastboot -i 0x2b4c boot twrp.img
then you will boot into a temporary TWRP recovery.Now you can do everything here utill it reboots or shutdown.
if you want to flash a permanent recovery, I suggest to you to convert your ZUI to COS.
Click to expand...
Click to collapse
Dear
I was using CM12 new version till last week and i have lots of problems, specially with mobile signal during the calls voice is dropping signal is too week as well. So i have decided to move to ZUI version and it's perfect so far i'm not facing any problem. Only the vulnerable is there some kind of malware and GPS having some bugs i have checked with bbs.zuk forms and they are suppose to fix it with next update. so i was trying to install the stagefright fix via recovery.remaining everything is smooth and faster than CM12.
hfutxqd said:
ZUI 1.2 locked the bootloader.If the TWRP recovery image file is twrp.img,You can try to do these:
Code:
fastboot -i 0x2b4c boot twrp.img
then you will boot into a temporary TWRP recovery.Now you can do everything here utill it reboots or shutdown.
if you want to flash a permanent recovery, I suggest to you to convert your ZUI to COS.
Click to expand...
Click to collapse
I also tried to boot. But it also denies this action :/.
So with the latest version my boot loader is locked. Sounds wonderful.
luqmanhans said:
Hello, i have a problem flashing custom recovery TWRP on ZUI.
below are the details of the problems:
ZUI Version: 1.2.040
Unlock Bootloader: YES (I feel a bit sketch on this part, because the process does not wipe any data)
Custom recovery to be installed: Un-Official 2.8.7.0 TWRP Recovery for ZUK Z1 by Breadcrust
1. when i try to flash the recovery on fastboot mode, it gives me this:
writing 'recovery'...
FAILED (remote : Invalid data)
finished. total time" 0.418s
2. when i try boot the recovery on fastboot mode, it also gives error:
downloading 'boot.img'...
OKAY [0.362s]
booting...
FAILED (remote: bootimage: incomplete or not signed)
finished. total time: 0.369s
* For the solution, i have tried kingroot to allow root access ---> NOT SUCCESFULL
** For 2nd solution, i have tried downgrading the ZUI version ----> NOT SUCCESFULL (cannot get into qdloader mode long enough).
*** I also have tried re-downloading the recovery image without using download accelarator (IDM) ---> NOT SUCCESFULL
edit: please... if somebody know the problem, please teach me how to overcome the problem. thank you (* sorry bad english)
Click to expand...
Click to collapse
In this case, you need flash fw Z1_CN_OPEN_USER_Q4275715.1_L_ZUI_1.0.050_ST_150910 via sd card ( root internal memory/creat sdfuse folder), after turn off fone and boot phone via factory mode recovery ( voulme down + power ). If phone flash ok, version is 1.0.050. So, phone can flash twrp recovery and rom CyanogenMod 12.1 .
Goodluck
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
luqmanhans said:
I have found the solution.. I will post it in the weekend
Click to expand...
Click to collapse
It is weekend now.
Can you please tell us the solution? I have the same problem & I have tried a lot of things with no luck!!! :crying:
hristos13gr said:
It is weekend now.
Can you please tell us the solution? I have the same problem & I have tried a lot of things with no luck!!! :crying:
Click to expand...
Click to collapse
First you must downgrade the ZUI from 1.2.040, just search this topic in this forum: how-to-flash-zuk-z1-zui-version-t3265741
After that you can boot with TWRP recovery. But if you failed to flash Cyanogen, use Modaco steps: 375804-convert-z1-from-zukui-to-cyanogen-os/
When your ZUK Z1 already use Cyanogen, you can flash to other recovery or ROMs easier .
Hello folks,
as for me such guides were really helpful in the past, and there are alway poeple who are new to a device and modding it, I decided to do one on my own, to show you how to perform a reset of your HTC U11 to Full Stock ROM/Firmware.
In many points I tried carrying together all that has been written down prior to this guide in many others, by many others. Thus I - in some kind - just consolidate the fact, using my own words and a little bit different structure than others. Anyway I'll show you my steps again in this tutorial as I think it is of importance to many that they can read the hole to do in one thread. But I advise everyone.
Please note that I will not accept any responsibility for possible occurring bricks. I can only confirm that this tutorial has been used by me, for my specific unit and all went successful.
Look here for [Collection] HTCU U11 – RUU/Firmware/Recovery/OTA/Backups
Regards
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Restore using a Nandroid Backup
Restore using a RUU
Knowledge of adb/fastboot
htc_fastboot and adb installed
HTC U11
07 RU_CID_FAIL: CID in android-info.txt does not match your phone’s CID
10 RU_MODELID_FAIL: MID in android-info.txt does not match your phone’s MID
12 SIGNATURE FAIL: phone expects an HTC signature and can't find one; or found a wrong one
22 RU_HEADER_ERROR: something wrong with your zip; check md5 of download
23 PARSING IMAGE FAIL: something wrong with the image within the zip
24 ANDROID-INFO FAIL: something wrong with android-info.txt within the zip
32 HEADER ERROR: the zip couldn't be read and unzipped properly; seems same as 22.
33 NOT KNOWN YET: might indicate hardware failure.
35 FAILED (remote: 35 RU_PARTITION_NOT_SUPPORT <PartitionName>): means you can’t flash an image in download mode, as it has to be done in bootloader mode.
41 WRONG MODEL ID: means the RUU is menat for a different device
42 WRONG CUSTOMER ID: means you got to swap CID first
90 PRE-UPDATE FAIL: means it only flashed aboot and you have to run the process again immediately to flash all other partitions. The htc_fastboot.exe now auto-reboots on Error 90!
99 UNKNOWN: usually indicates you are S-ON, but sometimes also recognizes other Security related issues.
130 WRONG MODEL ID: see 41
155 INDICATES DIFFERENT THINGS:
the need to relock bootloader; if S-ON
the RUU cannot be executed, because the software versions of ROM, Firmware and RUU aren't matching
170 CHECK USB: RUU won’t run because ADB isn't working properly
171 USB ERROR: happens all the time when the RUU reboots the phone to download mode. For some reason the device is losing its connection and making a RUU flash virtually impossible . There is an incompatibility between USB 3/3.1 and Fastboot/ADB, as well as an issue with Windows Device Detection on the newer Windows 10 builds.
171 USB ERROR FIX by @Sneakyghost:
How to fix RUU error 171 on Windows 10x64 easily
System: Win 10 Redstone (1607) x64 with Intel based USB3.0 and USB2.0 ports:
Sync Manager from HTC Website
Imported Reg-File from Post #1
Reboot
Click to expand...
Click to collapse
Restore using a Nandroid
flash TWRP custom recovery
download custom recovery at https://twrp.me
reboot to download mode
Code:
adb reboot download
flash recovery image
Code:
htc_fastboot flash recovery nameoftwrp.zip
Restore your Nandroid. If you got none yourself, it might be possible that you’ll find one here.
unzip the according Nandroid
copy Nandroid to TWRP/Backup/SerialNo/Nameofbackup on your extSD
restore Nandroid by using TWRP > RESTORE and choosing above copied Nandroid
Flash incremental OTA firmware
reboot to download mode
perform
Code:
htc_fastboot getvar all
and note down your original software version
download all incremental OTA firmwares to your PC, starting with the one above your current firmware version, up to the software version number of your above choosen Nandroid Backup (ATTENTION: If you are S-OFF it will suffice to download the latest Incremental OTA as well as the latest Combined Full Wipe firmware according to the above choosen Nandroid Backup)
flash all incremental OTA firmwares – one after another – following the below named steps (ATTENTION: If you are S-OFF you start with the Combined FullWipe, and proceed with the Incremental OTA one, to ensure that you’ll be able to receive upcoming OTA updates)
Code:
htc_fastboot flash zip nameoffirmeware.zip
(ATTENTION: this has to be done twice to comlete, and it will flash full firmware, thus TWRP will be replaced by stock recovery)
As soon as you restored the Nandroid and flashed all incremental firmware file up to the current build number of your Nandroid, that's it. Your are now Full Stock again!
Restore using a RUU
reboot to download mode
perform
Code:
htc_fastboot getvar all
and note down your original software version
download the latest Stock RUU for your device over here.
flash your RUU to revert to stock
rename RUU to 2PZCIMG.zip
copy 2PZCIMG.zip to root directory of SD card
reboot to download mode
press Volume Up button to confirm flash of RUU
As soon as your RUU has been flashed sucessfully, that's it. Your are now Full Stock again!
Reserved just in case
Thanks you for this Always needed thread
Is it possible to install a non-branded RUU on a branded device, but otherwise keep things completely stock?
Zico 10 said:
Is it possible to install a non-branded RUU on a branded device, but otherwise keep things completely stock?
Click to expand...
Click to collapse
Not possible for as long as S-OFF isn't available. Will do a de-branding thread as soon as it becomes available.
Sent from my htc_ocnuhl using XDA Labs
deleted
Will this wipe my data?
5m4r7ph0n36uru said:
Not possible for as long as S-OFF isn't available. Will do a de-branding thread as soon as it becomes available.
Click to expand...
Click to collapse
Dying to unbranded my HTC U11 as well...
Will the bootloader say "Relocked" or "Locked" if i use this method and restore it to stock?
Sorry for the basic question.. Its been a long time used a HTC phone.
rkrishnamurthy said:
Will the bootloader say "Relocked" or "Locked" if i use this method and restore it to stock?
Sorry for the basic question.. Its been a long time used a HTC phone.
Click to expand...
Click to collapse
It will say relocked. A real locked state might be possible if S-OFF hits, but no way to do it until then.
Sent from my htc_pmeuhl using XDA Labs
Nice info when in the future want to go back to stock.
Sent from my HTC U11 using XDA Developers 2016 Premium
Hi,
I'm new to android. I was advised to root my HTC U 11 but after doing so and exploring options I decided I'd rather just remove root and return to stock. However, I'm a noob and didn't do a backup before flashing the recovery and rooting. I found this thread and it seems to have what I need but I'm hesitant to take the next step as I don't want to brick my new phone. Can someone explain what I need to do to return to stock in as simple/dumbed down way as possible?
It's a single sim variant, carrier is Optus (Australia) and the original software version was 1.03.710.7
There's only this step by step guide. Couldn't be more precise at what to do. If you don't understand such a detailed guide I'm a little bit irritated at why you rooted in the first part, if you don't know what happens by doing so and how to revert back properly
Sent from my htc_pmeuhl using XDA Labs
5m4r7ph0n36uru said:
There's only this step by step guide. Couldn't be more precise at what to do. If you don't understand such a detailed guide I'm a little bit irritated at why you rooted in the first part, if you don't know what happens by doing so and how to revert back properly
Sent from my htc_pmeuhl using XDA Labs
Click to expand...
Click to collapse
i've did all the steps and still my bootloader will not relock with the RUU method.
Stock RUU flash not working, her is fail message. Any ideas?
Error code 19 RU_MAIN_VER_FAIL os-version in android-info missing or i
mr573162 said:
i've did all the steps and still my bootloader will not relock with the RUU method.
Click to expand...
Click to collapse
RUU any method does not relock bootloader, you have to manually do it in fastboot. Download mode, CMD type fastboot oem lock
---------- Post added at 08:31 AM ---------- Previous post was at 08:27 AM ----------
andybg40 said:
Stock RUU flash not working, her is fail message. Any ideas?
Error code 19 RU_MAIN_VER_FAIL os-version in android-info missing or i
Click to expand...
Click to collapse
Are you flashing the correct RUU?
schmeggy929 said:
RUU any method does not relock bootloader, you have to manually do it in fastboot. Download mode, CMD type fastboot oem lock
---------- Post added at 08:31 AM ---------- Previous post was at 08:27 AM ----------
Are you flashing the correct RUU?
Click to expand...
Click to collapse
Yes I have tried the command of fastboot oem lock and it tells me failed unknown command.
C:\adb>fastboot oem lock
...
FAILED (remote: unknown command)
finished. total time: 0.004s
mr573162 said:
Yes I have tried the command of fastboot oem lock and it tells me failed unknown command.
C:\adb>fastboot oem lock
...
FAILED (remote: unknown command)
finished. total time: 0.004s
Click to expand...
Click to collapse
You really doing it in download mode, or are you in bootloader?!
Sent from my htc_pmeuhl using XDA Labs
Hi i want change cust40 to c432,
data:
Smartphone: huawei p10 lite
build: was-lx1ac40b132(updated today) single sim
cust: c40(movistar)
images: i need help for which download and flash via 3btns method
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here is how I did it with my was-lx1ac02.
I'm not responsable if you lose all of your data or you brick your phone.
Here is the list off all the thing you need:
- the unlock code for your bootloader
- TWRP recovery, mine is Greatslon version 3.1.1.2
- OEMinfo C432 that you can download from the oeminfo collection on this forum
- the serviceROM C432B182 for dual sim, C432B183 for monosim (OEMinfo and serviceROM have to match)
- MicroSd
(HuaweiUpdate extractor 0.9.9.5)
Let's start.
First off all do a backup because you will encounter many Factory reset.
Then unlock the bootloader and install TWRP, better in recovery2.
Boot in TWRP and you did a backup of your OEMINFO on the microSd, than you change the file of your backup, that you will find under the TWRP directory on the microSd, with the OEMinfo files that you have previously downloaded that use the restore function to install the new OEMinfo.
Reboot the phone and unlock again the bootloader.
Extract the dload directory of the ServiceROM on the MicroSd.
If the TWRP was installed on recovery2 then boot the telephone and dial *#*#2846579#*#* ->ProjectMenu->Software Upgrade->SDCard Upgrade->OK，otherwise you have to reinstall an original Stock recovery that you can extract from the serviceROM with HuaweiUPdate extractor and then dial the service code.
The telephone will install the ROM and reboot.
After that check the serial number of the phone under the Info, if it end with the corresponding code of the service rom it's finished otherwise you have to do another factory reset and change the update.app in the dload directory on the microSd with the corresponding custom from the subdirectory, for example L21A for dual-sim LX1A and Update again the telephone through the service menu.
Now the Serial number should be right. If you still have some issue (Keyboard, NFC), you have to do again a factory reset and Flash again the main ServiceROM (biggest update.app again in dload Directory and again call the update througe the Projectmenu). At this Point the telephone should work perfectly.
I hope it works for you too. Mine is now dualSIM too.
Harlock1978 said:
Here is how I did it with my was-lx1ac02.
I'm not responsable if you lose all of your data or you brick your phone.
Here is the list off all the thing you need:
- the unlock code for your bootloader
- TWRP recovery, mine is Greatslon version 3.1.1.2
- OEMinfo C432 that you can download from the oeminfo collection on this forum
- the serviceROM C432B182 for dual sim, C432B183 for monosim (OEMinfo and serviceROM have to match)
- MicroSd
(HuaweiUpdate extractor 0.9.9.5)
Let's start.
First off all do a backup because you will encounter many Factory reset.
Then unlock the bootloader and install TWRP, better in recovery2.
Boot in TWRP and you did a backup of your OEMINFO on the microSd, than you change the file of your backup, that you will find under the TWRP directory on the microSd, with the OEMinfo files that you have previously downloaded that use the restore function to install the new OEMinfo.
Reboot the phone and unlock again the bootloader.
Extract the dload directory of the ServiceROM on the MicroSd.
If the TWRP was installed on recovery2 then boot the telephone and dial *#*#2846579#*#* ->ProjectMenu->Software Upgrade->SDCard Upgrade->OK，otherwise you have to reinstall an original Stock recovery that you can extract from the serviceROM with HuaweiUPdate extractor and then dial the service code.
After that check the serial number of the phone under the Info, if it end with the corresponding code of the service rom it's finished otherwise you have to do another factory reset and change the update.app in the dload directory on the microSd with the corresponding custom from the subdirectory and Update again the telephone through the service menu.
I hope it works for you too. Mine is now dualSIM too.
Click to expand...
Click to collapse
Please check these links(i dont need the fullota from firmware finder)?:
https://imgur.com/wykECFq
https://imgur.com/T6xrvEM
thanks for your help with servicerom do you mean this:
https://forum.xda-developers.com/p10-lite/help/original-service-rom-huawei-p10-lite-t3688097
By the way my model is was-lx1ac, which firmware i need, i cant see it ?
for flash in recovery2 twrp, is: fastboot flash recovery2 twrp.img
To Flash in recovery2 you need first to unlock the bootloader and that will do the first factory reset.
foliaje said:
fastboot flash recovery2 twrp.img
Click to expand...
Click to collapse
Right
The Servicerom is that on your link.
foliaje said:
https://forum.xda-developers.com/p10-lite/help/original-service-rom-huawei-p10-lite-t3688097
Click to expand...
Click to collapse
I read many thread about using the 3 files to debrand, but then most of the People have issue with NFC and Keyboard, etc.
The problem is that userdata is encrypted so on other forum suggested to use a kernel without encryption activated, that's why I think that the ServiceRom is better. At the end your telephone is like new. The bootloader is locked again. The only difference is that you have only one IMEI.
I've never tried to debrand with the three files, so I don't know if it works or not.
The TWRP versione that I used is this: http://4pda.ru/forum/dl/post/10843379/TWRP_by_GreatSlon.img
Bye
Harlock1978 said:
To Flash in recovery2 you need first to unlock the bootloader and that will do the first factory reset.
Right
The Servicerom is that on your link.
I read many thread about using the 3 files to debrand, but then most of the People have issue with NFC and Keyboard, etc.
The problem is that userdata is encrypted so on other forum suggested to use a kernel without encryption activated, that's why I think that the ServiceRom is better. At the end your telephone is like new. The bootloader is locked again. The only difference is that you have only one IMEI.Q
I've never tried to debrand with the three files, so I don't know if it works or not.
Bye
Click to expand...
Click to collapse
One question:
Awhen you say change original oeminfo by the downloaded, you mean flash(install) or restoring(sorry about this, i dont understand very well).
With respect to the servicebmy model is was-lx1ac, the servicebmy b182 or b183 model was-lx1 is the same or diferent to mine but compatible, i forgot i have emui 5.1 an Android 7.0 your example is with 6 or 7?, paste some images please
Harlock1978 said:
Here is how I did it with my was-lx1ac02.
I'm not responsable if you lose all of your data or you brick your phone.
Here is the list off all the thing you need:
- the unlock code for your bootloader
- TWRP recovery, mine is Greatslon version 3.1.1.2
- OEMinfo C432 that you can download from the oeminfo collection on this forum
- the serviceROM C432B182 for dual sim, C432B183 for monosim (OEMinfo and serviceROM have to match)
- MicroSd
(HuaweiUpdate extractor 0.9.9.5)
Let's start.
First off all do a backup because you will encounter many Factory reset.
Then unlock the bootloader and install TWRP, better in recovery2.
Boot in TWRP and you did a backup of your OEMINFO on the microSd, than you change the file of your backup, that you will find under the TWRP directory on the microSd, with the OEMinfo files that you have previously downloaded that use the restore function to install the new OEMinfo.
Reboot the phone and unlock again the bootloader.
Extract the dload directory of the ServiceROM on the MicroSd.
If the TWRP was installed on recovery2 then boot the telephone and dial *#*#2846579#*#* ->ProjectMenu->Software Upgrade->SDCard Upgrade->OK，otherwise you have to reinstall an original Stock recovery that you can extract from the serviceROM with HuaweiUPdate extractor and then dial the service code.
The telephone will install the ROM and reboot.
After that check the serial number of the phone under the Info, if it end with the corresponding code of the service rom it's finished otherwise you have to do another factory reset and change the update.app in the dload directory on the microSd with the corresponding custom from the subdirectory, for example L21A for dual-sim LX1A and Update again the telephone through the service menu.
Now the Serial number should be right. If you still have some issue (Keyboard, NFC), you have to do again a factory reset and Flash again the main ServiceROM (biggest update.app again in dload Directory and again call the update througe the Projectmenu). At this Point the telephone should work perfectly.
I hope it works for you too. Mine is now dualSIM too.
Click to expand...
Click to collapse
Thanks a lot! Its a interesting way to debrand. But my opinion is that when you flashed oeminfo, no need to boot and unlock booloader again with serice codes etc.....Just turn off phone and dload method with three buttons will do the rest of repairing of device. When you press three buttons with dload and upadate.app on SD card stock recovery is the first thing what is installed. After that recovery does the rest of things. I speak with experience with P9 lite. No need flashing stock recovery before dload method with three buttons.
Alexxxx1 said:
Thanks a lot! Its a interesting way to debrand. But my opinion is that when you flashed oeminfo, no need to boot and unlock booloader again with serice codes etc.....Just turn off phone and dload method with three buttons will do the rest of repairing of device. When you press three buttons with dload and upadate.app on SD card stock recovery is the first thing what is installed. After that recovery does the rest of things. I speak with experience with P9 lite. No need flashing stock recovery before dload method with three buttons.
Click to expand...
Click to collapse
You are right. but in my case TWRP was installed instead of stock recovery so I had to unlock bootloader and install original recovery again.
This is how I did it, probably there are better and easy way
Harlock1978 said:
You are right. but in my case TWRP was installed instead of stock recovery so I had to unlock bootloader and install original recovery again.
This is how I did it, probably there are better and easy way
Click to expand...
Click to collapse
Dload method with three buttons install stock recovery automatically. No need additional step and manual flashing stock recovery. Update.app from larger file include and recovery partition too. When you extract it with Huawei extractor it is visible.
Sent from my WAS-LX1 using Tapatalk
Alexxxx1 said:
Dload method with three buttons install stock recovery automatically. No need additional step and manual flashing stock recovery. Update.app from larger file include and recovery partition too. When you extract it with Huawei extractor it is visible.
Click to expand...
Click to collapse
So i need:
- unlock bootloader
- flash twrp and backup
- flash oeminfo( ¿i need change the oeminfo.bak, by the one?
Then with update.app, "flash" with serviceromb182 in my case.
foliaje said:
So i need:
- unlock bootloader
- flash twrp and backup
- flash oeminfo( ¿i need change the oeminfo.bak, by the one?
Then with update.app, "flash" with serviceromb182 in my case.
Click to expand...
Click to collapse
Yes, it's correct.
Just follow instructions on link bellow.
http://ministryofsolutions.com/2017/10/huawei-p10-lite-rebrand-convert-dual-sim-free-method.html
Sent from my WAS-LX1 using Tapatalk
Alexxxx1 said:
Yes, it's correct.
Just follow instructions on link bellow.
http://ministryofsolutions.com/2017/10/huawei-p10-lite-rebrand-convert-dual-sim-free-method.html
Click to expand...
Click to collapse
Oh thanks, one question my model is was-lx1ac single sim, is compatible with wasL21 or was-lx1 on link above(servceRom)?
foliaje said:
Oh thanks, one question my model is was-lx1ac, It is compatible with wasL21 or was-lx1 on link above(servceRom)?
Click to expand...
Click to collapse
On mentioned link you will find files for both models was-lx1 3gb model and was-lx1a 4gb model. Don't mix those two different models. Just use provided files for your model It means oeminfo for was-lx1a and servise rom for same model.
Sent from my WAS-LX1 using Tapatalk
Alexxxx1 said:
On mentioned link you will find files for both models was-lx1 3gb model and was-lx1a 4gb model. Don't mix those two different models. Just use provided files for your model It means oeminfo for was-lx1a and servise rom for same model.
Click to expand...
Click to collapse
Looking serviceRom there was-lx1 no lx1a, is It compatible both models and checking your link they put for was-l21
foliaje said:
Looking serviceRom there was-lx1 no lx1a, is It compatible both models and checking your link they put for was-l21
Click to expand...
Click to collapse
Just read carefully and also you can find service rom and offcial instruction for dload here https://forum.xda-developers.com/p10-lite/help/original-service-rom-huawei-p10-lite-t3688097
Sent from my WAS-LX1 using Tapatalk
Alexxxx1 said:
Just read carefully and also you can find service rom and offcial instruction for dload here https://forum.xda-developers.com/p10-lite/help/original-service-rom-huawei-p10-lite-t3688097
Sent from my WAS-LX1 using Tapatalk
Click to expand...
Click to collapse
sorry bro but i insist, icant see my model(was-lx1a) below
Service repair firmware [Unbrick full] [ Download ]
Model: WAS-LX1, WAS-L01, WAS-L01A, WAS-L21, WAS-L21A, Warsaw-L21, Warsaw-L01
Build number: C432B182
Vendor: [ hw/eu ]
Country: [ Estonia Austria Poland Bosnia and Herzegovina Denmark Czech Republic Croatia Latvia Lithuania Romania Moldova Norway Sweden Serbia Cyprus Slovakia Slovenia Greece Finland Bulgaria ]
Detailed instructions: HUAWEI WAS-LX1C432B182 Software Upgrade Guideline.docx
These firmware to use to restore the phone or upgrade using the three buttons.
Service repair firmware [Unbrick full] [ Download ]
Model: WAS-LX1, WAS-L01, WAS-L01A, WAS-L21, WAS-L21A, Warsaw-L01, Warsaw-L21
Build number: C432B183
Vendor: [ hw/eu ]
Country: [ Austria Poland Croatia Romania Macedonia (the Republic of) Serbia Slovakia Greece Bulgaria ]
Detailed instructions: HUAWEI WAS-LX1C432B183 Software Upgrade Guideline.docx
These firmware to use to restore the phone or upgrade using the three buttons.
Service repair firmware [Unbrick full] [ Download ]
Model: WAS-LX1, WAS-L21, Warsaw-L21
Build number: C10B170
Vendor: [ hw/ru ]
Country: [ Russian Federation Belarus Kyrgyzstan Mongolia Armenia Uzbekistan ]
Detailed instructions: HUAWEI WAS-LX1C10B170 Software Upgrade Guideline.docx
These firmware to use to restore the phone or upgrade using the three buttons.
Service repair firmware [Unbrick full] [ Download ]
Model: WAS-TL10, WAS-AL00, Warsaw-AL00, Warsaw-TL10
Build number: C00B211.
Vendor: [ all/cn, demo/cn, cmcc/cn ]
Country: [ China ]
Detailed instructions: HUAWEI Warsaw-AL00C00B211.docx
These firmware to use to restore the phone or upgrade using the three buttons.
LX1A
X means some number such as 0 or 2.
L21 dual SIM.
L01 single SIM
A is mark for 4gb model.
So for lx1a is suitable l21a, If you flash dual SIM oeminfo before, of course.
Regards
Sent from my WAS-LX1 using Tapatalk
Alexxxx1 said:
LX1A
X means some number such as 0 or 2.
L21 dual SIM.
L01 single SIM
A is mark for 4gb model.
So for lx1a is suitable l21a, If you flash dual SIM oeminfo before, of course.
Regards
Sent from my WAS-LX1 using Tapatalk
Click to expand...
Click to collapse
Thanks
Enviado desde mi WAS-LX1A mediante Tapatalk
foliaje said:
Thanks
Enviado desde mi WAS-LX1A mediante Tapatalk
Click to expand...
Click to collapse
Bro b182 or b183 for single sim
Enviado desde mi WAS-LX1A mediante Tapatalk
foliaje said:
Bro b182 or b183 for single sim
Enviado desde mi WAS-LX1A mediante Tapatalk
Click to expand...
Click to collapse
B182 DS
B183 SS
I don't know what u want to do.....after all mentioned steps you asked this? Strange [emoji848]
Sent from my WAS-LX1 using Tapatalk
Alexxxx1 said:
B182 DS
B183 SS
I don't know what u want to do.....after all mentioned steps you asked this? Strange [emoji848]
Sent from my WAS-LX1 using Tapatalk
Click to expand...
Click to collapse
change cust
Sorry, but i was confused with which download, better ask many times before do something wrong, you don't think So?
Enviado desde mi WAS-LX1A mediante Tapatalk