Hi all,
This may be a dumb question but as a "newbe" to he HD can someone tell me the correct method and or directory structure required when copying music files to the storage card? I tried puting them in Music/"album name"/ but my HD did not find them. I followed the manual and used actisync and WM11 but it still did not work. Have done a hard reset as after trying these two methods the original two songs did not show either. Any help would be appreciated.
You need to add the Music Tracks to the Windows Media Library - once you've copied the files across onto the Memory Card (it really doesn't matter on the Directory Structure) go into Windows Media - it normally takes you straight to the Library - then from the Menu select "Update Library ..." and wait a while.
Many thanks
Hi Paul,
Thanks for the quick response, I new it had to be something simple.
Adding Music to TF3D music player.
Hi there,
I was struggeling with the same thing.
Remove; Application Data\HTC\HTC Album\AudioManager_Eng\'Audiomanager_Eng.vol' and softreset.
If you can't remove this file softreset first and try again.
After the file is removed and a softreset is done TF3D will add your music automatically to the library when you scroll to the today music player.
It is music/artist/album.
You might want to get a small piece of software on your PC to check the music ID tags. I had alot of problems to start with and found that deleting the album no and comments gave no problems.
You dont have to use active sync through WMP11. You can simply use the explore on active sync to find your music folder and then drag and drop.
To delete audiomanager.exe you will have to disable touchflo.
I'm having the same problem with the TouchFlow3D media player. However I don't seem to have the folder structure you mention. I have ...
"Application Data\HTC\HTC Album" but there's no "AudioManager_Eng" folder. My "AudioManager_Eng" folder is located at "Application Data\HTC\AudioManager_Eng" and in there I DO NOT have "Audiomanager_Eng.vol".
Any other suggestions?
Thank you,
Mike
1. if you add a lot of music files it will take a long time for your HD to find them. a very long time!
2. to test, start with 1 or 2 albums in mp3 format
3. take care that each of the mp3 files to have the same album name on the Id Tag
4. on your card you can have any structure. i use something similar to my PC: music/artist/album
5. you can add a picture (artwork) within the respective folder for each album and it will be displayed on the tf3d player (the name should be folder.jpg for each picture)
if you respect these steps for sure it will work. you can also use s2p and the albums pictures will look very cool when you wil slide them
good luck!
Any update on this? Mine doesn't work..
Help!
I don't know what's wrong with my HTC Diamond. I got the Sprint version. It was working fine until a few days ago. Everytime a play a song on the TF3D player, it plays the songs, but then it stops the songs halfway thru, and then it wont continue playing unless I restart the whole song. I tried doing the Hard reset, soft reset, follow the steps above and it still does the same thing. On the WM player, they work fine, but not on the TF3D player. Pls help
In my playlist only for some songs are album images. Is it possible to add images for mp3 songs in original built in htc touch hd music player? If yes pleas write replay. Thanks.
Really no info about this?
Solution
In my playlist only for some songs are album images. Is it possible to add images for mp3 songs in original built in htc touch hd music player? If yes pleas write replay. Thanks.
Click to expand...
Click to collapse
That's possible yes:
HTC FAQ Page
Simple answer: Add a image file (in JPeG) to the folder you store the album in and call the file folder.jpg (you may hide it if you want).
One thing: You need to re-add the files to the player, meaning all files you have in your current playlist (on the TF3D page) will not get updated untill you reselect them.
KilZone
KilZone said:
That's possible yes:
HTC FAQ Page
Simple answer: Add a image file (in JPeG) to the folder you store the album in and call the file folder.jpg (you may hide it if you want).
One thing: You need to re-add the files to the player, meaning all files you have in your current playlist (on the TF3D page) will not get updated untill you reselect them.
KilZone
Click to expand...
Click to collapse
Thank you very much.
http://forum.xda-developers.com/showthread.php?t=449824&highlight=display+Album+art
Media Monkey is really a great app!
KilZone said:
That's possible yes:
HTC FAQ Page
Simple answer: Add a image file (in JPeG) to the folder you store the album in and call the file folder.jpg (you may hide it if you want).
One thing: You need to re-add the files to the player, meaning all files you have in your current playlist (on the TF3D page) will not get updated untill you reselect them.
KilZone
Click to expand...
Click to collapse
no it doesn't work. at least for me.
look what i am doing:
1. i set my usb connection as disk drive
2. i load to my winamp the songs from album Crises - Mike Oldfield and with winamp i download the artwork from internet named "Mike Oldfield-Crises.jpg"
3. i connect my hd to my laptop and copy into folder Music from my sdcard the folder crises. inside this folder i have the album "Crises - Mike Oldfield" and the "Mike Oldfield-Crises.jpg"
4. on my sdcard i rename "Mike Oldfield-Crises.jpg" artwork as "crises.jpg"
5. set my usb connection asa activesync
6. start tf3d music player and wait until it finds the new album
7. after a while it finds it but the artwork is not displayed
please tell me what am i doing wrong!
thank you!
You have to name the artwork folder.jpg
Not the name of the folder, not the name of the artist. It actually has to be called:
folder.jpg
That's f-o-l-d-e-r-.jpg
Weird i know but it does work.
meanwhile i figured out myself.
but thank you anyway!
Keep in mind that TF3D player doesn't use the file folder.jpg to display the image. It uses a file named hTC_AM_AlbumArt.jpg. If it's not present but there is a file named folder.jpg, TF3D player will create a file hTC_AM_AlbumArt.jpg from it.
Therefore you can create your AlbumArt directly under the name hTC_AM_AlbumArt.jpg.
(however, WMP still uses folder.jpg, therefore I've kept both).
But why don't use mp3 artwork tag to display album artwork ?
Also eventhough you have hTC_AM_AlbumArt.jpg in that folder, TF3D music player sometime never display the albumart.
TF3D music player suck.
Still like itunes that create playlist easily by drag n drop.
Even I create the playlist manually, it sometime didn't work.
Hi,
how can i put my own image on the music album?
i don't want to use Gracenote.
Thanks
Idoz1977
i've had that problem with album arts.....after many programs used i'm now using a program called Mp3Tag Editor.......it's soooo great and you can add the album art of your choice with no complications....you can download it from its site [Sorry, as a new member i'm not allowed to post links to other sites] just search google for [ mp3tag editor ]....
you just need to modify a little bit in the settings......so here is what to do :
after completing installation open the prog --> click on the [Tools] tab and then choose [Options] then modify the [Mpeg] setting just like what you see in the attached image......
have fun adding your album arts to your favorite music...
i hope that will help you......
I use media monkey as it works very similar to itunes, which I'm used to. Can add any artwork to any music files, and you don't even have to resize the artwork first
There are several methods.
You can embed artwork in the music files themselves, using a pc application as described above (Media Monkey, Mp3Tag...).
Or you can simply copy your album cover image to the folder where the music files are and rename it to 'folder.jpg'. This can be done using the phone's own file explorer, so no need for a pc.
Thanks to everyone.
i did it.
Best regards,
idoz1977
Robrecht said:
There are several methods.
You can embed artwork in the music files themselves, using a pc application as described above (Media Monkey, Mp3Tag...).
Or you can simply copy your album cover image to the folder where the music files are and rename it to 'folder.jpg'. This can be done using the phone's own file explorer, so no need for a pc.
Click to expand...
Click to collapse
I tried the folder.jpg in the same folder as my music file but it didn't work?
I am using the same folder structure as the HTC pre supplied music files and I can view the jpg in the PDA editor
Any ideas? I prefer the simple (less software) approach rather than loading software like mp3tag and mediamonkey etc
I don't remember the folder structure of the pre-supplied music, but my music is arranged like this: "Storage Card\Music\[Artist]\[Album]\". In each folder, I have all the mp3's for that specific album, along with its own "folder.jpg". I assume it's the same in your case.
It could take a while before you actually see it. Try playing each of the album's tracks (just skipping through them should be enough), then load another album, then go back to the first. You should start seeing the folder image this way.
If that doesn't work, you could check the album folder to see if there's a file with a name that starts with "~hTC_". This is the Music Player's own cover image, made from whatever cover you supplied. If such a file already exists, you could try deleting it and then repeat the above steps to force the Player to recreate the cover image.
I think that a post like this must be done, because I can't find anything right, and i have read many other people questioning about :
my device HTC HD2 Leo must be the best mp3 player!
-2 days ago I was thinking: yeah this hd2 is a great device, but to complicate to do some things and ecc.. I'm not a programmer, i can't do by myself I alwas have to wait to find solutions and twaeks.. even music, i can’t import a simple playlist.. i don't know.. I never try an iphone. Probably is simpler, it's almost a legend, it's firstly an ipod… At least music will be perfect... i will think about..
-yesterday i tried an iphone: i wanted just to test the music software, but i immediatly realized: Wow is this an iphone?!?! it seems a toys!!! and the music soft it's even less powerfull and functional then i was thinking! Always too enphasys on this object! it just slide well!... and i can't do anything different here..bhaaa
No matches, come proudly back on my wm hd2... !! at the end it really eats all other devices,and i have to solve his problem!..
Spending again time in serching, finally i found a way to manage music pc-device for good. yeah!!!!!!!!!!!!! more complex than expected, but damn, it works. As usuall for McGuiver’s breed\wm users .
--------------------------------------------------------------------------
The first problem is the music software on pc, you can choose obviously what you want, tranfer just songs has no problem for all. The problem is playlists exporting in ALL cases. I want my (sorry it needs months) mood-auto-playlists, or 4-stars-upper or everithing else both on pc and device with the ability of playing them when i want..but…but…but.. nothing?!?!? Are you joking me?? it’s so strange I want it, without rebuilding all playlist on device?!? Not perfect sync pc-device and reverse device-pc..just my playlist on device when i sync..
unlucky, it ‘s so because of some issues in devices and pc software options ...
1: pc music software in my experience:
Windows media player 12: good default software but limited. Even if is the windows software, now it can't tag music, and syncing it's unable to export the playlist file on device, only songs. (i belive probably we will see a windows phone7 ad hoc software, there no answers to that strange support, probably they want to make wm7 more attractive..)
MediaMonkey: the best music managing player! and not only the best, if you really want to organize music in deep way, it's the ONLY allinone solution. but as for the hd2, you have to search and learn a lot on the net, I had many problems in first experience. In the end, it can do everything on devices and pc. There's just one problem, it exports well playlists(m3u) but on wm device with storage card they were ‘wrong’written. argh! (but now i can solve!)
Itunes: personally i don't like it, but it's a good manager. Nothing really better against the others, it’s just comfortable if you have an apple device. if you depend from it, you can find solutions like pocket tunes software, or else.. but why when i have MM, and many software music player device?
Winamp, foobar, vlc.. they where appreciated software too, but for me MM still does everything better..
2: I conclusively choose MM. But how export well playlists? The problem remain that when I export a playlist, MM can’t recognize the songs file path written in playlists. So you’ll have readable lists imported, without the right file association. If you look in playlists opening them with notepad, songs playlists path will be: music\artist\album\song ..instead of the right (for most device player) storage card\music\artist\album\ songs…
In these way the only device software able to read these ‘wrong’ playlists will be that great free software called S2p from A_C, that can be extended with S2U2too. It works well, and probably on any wm device, but in my opinion on my Hd2 I would like something even better if possible..
I took a look on other software, and even if they are not all free, they all have their + and -. Playlists are featured not so much and well too.. Between them I personally prefer these two:
Pocket Player: the best in general,scrolling ,playlist,nowplaying,ratings,albumart..
haven't tried with 10 gigs jet, but it’s really the most powerful, usable, music oriented one.. even if some things are still not perfect, I hope they will be fixed on 4.2 release. It reads M3U playlists and other.
Htc audio manager(manila/sense music tab): It’s the only one with that beautiful landscape mode. - : must be tweaked to scan the right folder on SD, navigation has not alphabet scroll, and at the end I think that PP works better, but it’s good and already installed. It reads just ASX playlists file.
--------------------------------------------------------------------------
Converting:
Everithing you choose, the important is to understand the right file format for playlists on your device player. HTC->asx, PP->m3u, others->…………. And converting will make you free
As said the only auto-exportable playlists files, seems to come only with MM, and being my player I’ll work with these. It ‘s stupidly complex, I have to admit, but … works! Hoping that someone in future could make it simpler (in MM or in wm devices, please!!):
After I sync device with MM importing mp3s and playlists files, written playlists’ songs path, as said, will be readable but wrong\incomplete for all player except s2p. And all the other players remain unusable in this way.
To solve, the only solution I found is to convert that file in working one, and you need two tools:
-m3uToAsxConverter (for pc) http://electron.mediamonkey.com/forum/viewtopic.php?f=2&t=29731
-and PlaylistManager (on device) i don’t remember link, sorry( Google it)
In this way, if you drag and drop the imported-device-not-working-m3uplaylist-file ( that has not ‘storage card’ write in paths) on m3uToAsxConverter.exe file. It will be converted automatically in an asx file (good for htc audio manager) with also the right path rewritten.
Now re-import manually the converted playlist on device, and open that with PlaylistManager.
If you want to insert it in HTC AM, go for file , save as HTCoption….
Or if you want it for others players, choose simply save as , for example in PP folder, and convert the asx file again in an m3u file.
Finally you’ll have all your playlists on device too, remembering ,thanks to McGuyver, to update them when something change on the pc library.
That’s so! Yhahuuuu
--------------------------------------------------------------------------
Hoping this could help others, I’m quite a newbie in Wm world, so I don’t know if all this is the best solution , but in all the time I spent searching about, this is the only working way..
Let me know if you discover\do something better please!
where we want to go without XDA !
a big kiss from italy
Thanks for taking the time to share. I just started looking for a solution to this today!
A simpler way?
TommyRose said:
I think that a post like this must be done, because I can't find anything right, and i have read many other people questioning about :
my device HTC HD2 Leo must be the best mp3 player!
Converting:
Everithing you choose, the important is to understand the right file format for playlists on your device player. HTC->asx, PP->m3u, others->…………. And converting will make you free
As said the only auto-exportable playlists files, seems to come only with MM, and being my player I’ll work with these. It ‘s stupidly complex, I have to admit, but … works! Hoping that someone in future could make it simpler (in MM or in wm devices, please!!):
After I sync device with MM importing mp3s and playlists files, written playlists’ songs path, as said, will be readable but wrong\incomplete for all player except s2p. And all the other players remain unusable in this way.
To solve, the only solution I found is to convert that file in working one, and you need two tools:
-m3uToAsxConverter (for pc) http://electron.mediamonkey.com/forum/viewtopic.php?f=2&t=29731
-and PlaylistManager (on device) i don’t remember link, sorry( Google it)
In this way, if you drag and drop the imported-device-not-working-m3uplaylist-file ( that has not ‘storage card’ write in paths) on m3uToAsxConverter.exe file. It will be converted automatically in an asx file (good for htc audio manager) with also the right path rewritten.
Now re-import manually the converted playlist on device, and open that with PlaylistManager.
If you want to insert it in HTC AM, go for file , save as HTCoption….
Or if you want it for others players, choose simply save as , for example in PP folder, and convert the asx file again in an m3u file.
Finally you’ll have all your playlists on device too, remembering ,thanks to McGuyver, to update them when something change on the pc library.
That’s so! Yhahuuuu
--------------------------------------------------------------------------
Hoping this could help others, I’m quite a newbie in Wm world, so I don’t know if all this is the best solution , but in all the time I spent searching about, this is the only working way..
Let me know if you discover\do something better please!
where we want to go without XDA !
a big kiss from italy
Click to expand...
Click to collapse
The path in the .m3u is dependent on where you tell MM to save it. So I moved all my files to a folder in this path on the pc: "c:\storage card\music\ . . ."
Then I saved the playlist to the "c:\" and the playlist now includes the "storage card" part of the path. You don't have to put in root at c:\. I can go anwhere, but you have to save the playlist in the level above "storage card"
When I moved it to the HD2, it did not work! I saved a new song on the hd2 to the same playlist, moved it back to the PC to see why it would play, and not the songs saved by MM. It turns out that MM saves the path as "storage card\music\ . . ." It does not put in the initial '\" in the path. It should be "\storage card\music\ . . ."
So, now after I save the play list with MM to c:\
1. Open playlist with notepad
2. type Ctrl+H (Replace)
3. type "storage" in 'Find What'
4. type "\storage" in 'Replace with'
5. select 'Replace all'
6. save the file
7. sync to hd2
That's it. The file is on correct format with the full path. The point is to have identical paths to the music on both the hd2 and PC.
Hope this helps . . .
Strange behavior...
Hi!
I read through your small guide and did not get any answer to my problem so here goes:
I had my songs in one folder on my SD card, i had made two playlists.
Then without removing thoose two playlists i moved my whole music folder into where it should be in My Documents/Min Musik <-- Swedish path!
Now to my problem, as you can see in the picture i have two playlists with a different icon (Blandat and Sade) on it, thoose to is not removeable
why and how can i remove them manualy? I have searched through my whole device without finding them.
Please can you help me...
INFO
I use Windows media player to hold my music and playlist on my PC, i then make an auto sync of my HD2 with wmp for all my playlists and they all work perfect in sense?
my music AND my playlists on my PC gets transferred and recognized perfectly?!?
EDIT: by the way, for tagging my mp3's with information AND build in image witch also gets shown everytime in sense, i use NCH stamp id3 tag editor.. works like a charm
low-dogg said:
I use Windows media player to hold my music and playlist on my PC, i then make an auto sync of my HD2 with wmp for all my playlists and they all work perfect in sense?
my music AND my playlists on my PC gets transferred and recognized perfectly?!?
EDIT: by the way, for tagging my mp3's with information AND build in image witch also gets shown everytime in sense, i use NCH stamp id3 tag editor.. works like a charm
Click to expand...
Click to collapse
dogg,
Thanks for sharing. Could you please share versions of wmp on pc? ALso, what type of playlist (.asx, .m3u, etc) is created on PC? does it sync as-is, or converted to another type on hd2? Also, what is the folder structure of your music (and playlists) on both PC and HD2?
Thanks . . .
This is my solution for those who use Itunes and especially those who prefer to use the simplicity of the unix platform within the mac.
The software for syncing my music is called double twist which runs both on Mac or PC, this great piece of software recognises the HD2 straight away and imports everything from your itune library which you just copy to your SD card. It even now support itune s the Android Market for those that may want to port Android to their HD2 in the future when it becomes available.
Once you have connected your beloved HD2 a sync music panel appears with 2 options, sync all music or selected playlists, I use this section for only syncing my podcasts because that is the only thing that changes each week, this is how I do it;
1. Create a playlist in itunes called podcast
2. start up DT and go to library > music> source >itunes and select the podcast playlist you created
3. Now go to the file menu > library > add to library
4. Now the playlist will appear every time you connect and you just need to refresh this playlist which can be doe automatically in the preferences.
Every week I start up itunes and wait for it to finish downloading my subscribed podcasts and then drag them into my podcast playlist, after deleting the previous weeks podcast. Now just start up DT with HD2 connected and press the sync button and my podcasts are now on my my HD2
This solution is excellent for those who realised that owning a MBP running virtual box with windows 7, best of both worlds. This set up allows you to take advantage of the apple MBP and still be able to flash ROM's from the one set up.
<p><em>hope</em> this helps</p>
regis.stration said:
dogg,
Thanks for sharing. Could you please share versions of wmp on pc? ALso, what type of playlist (.asx, .m3u, etc) is created on PC? does it sync as-is, or converted to another type on hd2? Also, what is the folder structure of your music (and playlists) on both PC and HD2?
Thanks . . .
Click to expand...
Click to collapse
This is probably WAY too late, but as I had to sync my first WMP playlist to my HD2 today and ran into the same issues as everyone else before finally working out the secret, I thought I'd update this thread. Best of all, you don't need to download or convert anything, syncing does work as it is supposed to.
- First of all Restart both your computer and HD2 (this is a precaution and can't hurt).
- After making your playlist in WMP attach your phone via USB as normal. IMPORTANT: when your connection options appear, make sure you select 'Active Sync' and NOT 'Disk Drive' (even though this would be a faster transfer the playlists won't come across this way). Press Sync on WMP.
- After Sync in WMP is complete, make sure you ALSO 'Sync All' in Active Sync. This might take a while and may even create an error at the end. Don't worry. If you don't do this, you may find that even though the Playlists appear on your HD2, none of the Music actually plays.
- Launch your HD2 Player and let the scanning complete, but don't play anything.
- Unplug and Restart your HD2.
- Now (hopefully) your playlists will appear AND play.
Ra-ey
Am I reading this thread correctly...
Does the HTC Sence player read .asx playlists only?
If so where does the playlist have to sit for the sense player to pick it up?
If I read this correctly should it go in the phone root?
If so I have a problem: I have placed one there and the sense player can't see it :-(
I am using MusicBee to create and export my playlists in.asx format. I can even get it to map the paths correctly from PC path to HD2 path so may have a simple working solution if I can just get sense to recognise the .asx file.
Any help on where I should locate the .asx file so that sense player will see it greatly appreciated.
I can't even find the ones that I have created manualy through the sense player itself!! WTF does sense do with them??
Regards
Clive
HTC HD2 playlist location and format
I have done some investigating. It appears that the audiomanager does NOT use ASX format playlists, but basically m3u style with just the path to each song, one song per line. The location of playlists is \Application Data\HTC\AudioManager_Eng\playlists
The tricky part seems to be that playlists are in a BINARY format. If you use Playlist Manager to convert a playlist for audiomanager, then copy that playlist from \Application Data\HTC\AudioManager_Eng\playlists you will be able to open it in Notepad and it appears to be an ordinary text file. In fact, you can add songs to it in notepad, save the file, copy it back to \Application Data\HTC\AudioManager_Eng\playlists and after a soft reset the playlist will have your new entries. However, if you were to copy and paste the text in that file to a new text file, copy that to the HD2 and soft reset the new playlist will appear empty.
Examining the files shows the playlists produced by Playlist manager are substantially bigger than an equivalent plain text file. A hexdump shows that each character is padded by a hex 00, and there is some extra stuff at the start.
In short, Playlist manager (http://mobisapienz.com/index.php?option=com_jdownloads&Itemid=82) is the way to go. Make plain m3u playlists (making sure the path is relative to your phone, not your pc, as described in other posts), open them in playlist manager and use it to export them to HTC audiomanager - then soft reboot.
BTW, playlists made this way can't be edited in the phone. Changes will be lost when you reset. Deleting them seems to be a bit tricky, too.
Edit: Playlists created on the phone are stored in a single binary file in \Application Data\HTC\AudioManager_Eng\AdioManager_Eng.vol