Hi, I was wondering if there is a way to turn off the two sided pull down menu. Right now if I pull it down from the right side it goes straight to the wifi/bluetooth/airplane etc options. I know on my OPO i could turn it off but I can't seem to find that setting on my OPT.
It's not available in the current version of Oxygen OS. You can either install a ROM or wait for an update hoping this option is built in.
Annoys me too
Its not the end of the world but I'm just not used to it an keep opening the wrong part.
Even installing Xposed and gravitybox dosent help, although gravity box has a turn off setting for quick pull down, it still dosent work.
Related
I installed Extended controls and im sure it was around this sort of time it happened, but i looked up and see that the G symbol ive had for the passes 3-4 days had disappeared, i thought this wasa good thing and result of a button to switch data off, but can only find GPS button and switching that doesnt effect anything on the screen
obviously without this i cant get online on my phone so any quick help would be appreciated!
Extended controls does have an option to make a switch for that, try making a switch widget for data connection and then flip it?
dakine said:
Extended controls does have an option to make a switch for that, try making a switch widget for data connection and then flip it?
Click to expand...
Click to collapse
data connection, ok thanks. i restarted phone and got it enabled back. Where in the standard options and settings for android is this located then? pretty good feature to save power when i dont want my phone checking or updating itself?
EDIT:
this button on extended controls doesnt work for me, and enabling it loses my internet connectivity and i cant get it back on, fail.
After restart this time my G symbol came back, and then disappeared ?
I just noticed that my GPS icon is visible at the top of my notification bar. I haven't installed any new programs since flashing the firmware, so I am not sure what is making the GPS turn on right now. And I just rebooted my phone this morning. I haven't rebooted again to see if it comes back--I want to see how long it stays there. But it has been there for five minutes or so now. Is there a way to see what app has told the phone to make the GPS active?
By the way, does anyone else think the new firmware requires a longer, more deliberate swipe to wake up the phone after tapping the power button?
um... I have the new firmware, and the GPS icon is not persistent.
I run stock, and the GPS will kick in at times, no idea why. It's not persistent though.
floepie said:
I run stock, and the GPS will kick in at times, no idea why. It's not persistent though.
Click to expand...
Click to collapse
If you have adb enabled, and can run adb logcat when the GPS kicks in and see what running process that might be accessing this?
Even I have the same problem.
Is it the plus sign inside a rhombus with signal strength to the right side of it??
My fascinate got updated 2 days ago and ever since the sign appears on my status bar.
Also, after the update I am not able to connect my phone to my Mac. Its not able to mount the disk.
Please help !!!
Thanks,
DJ
I like ka5 too.. the heptic feedback is still notworking right but ill keep this firmware until the official one comes..
This was happening to me on JL5. Turns out it was ShopSavvy barcode scanner (Big In Japan). I promptly uninstalled. Just a thought...
How do I resolve this? Am I creating a problem or?
The other day I used the side https://www.windowsphone.com/en-US/find and tried to give functions Lost your phone? We can find it for you! Everything was ok! After two days I checked again, but now we give to the picture (windows.jpg). Can someone send me where to look for the programs of something or I 'm screwed
I never booked marked it, just signed into my live.com account clicked on "Devices" from the top left when you hover the mouse over "Windows Live" and it should show up there. But this is what the site shows up to me as now:
https://devices.live.com/
Is it possible that when I check how it works ( ring, lock, or erase your phone ) that I messed something and now you can not use that option.
in order for this picture when I go to Change Windows Phone 7 setting of switch me to that previous file
Oops...
Something went wrong and we can not show you this page right now.
Go to windowsphone.com
Is it possible that I am something in the phone or in checks or something messed up...
Oh, right. You do have to enable it on your phone first.
Settings > Find My Phone
You also have to have a live (ie hotmail or msn) account on the phone.
But you also might need to re-add it on the live.devices.com. I know after I flashed it, it didn't recognize my phone so I just hit "add a phone" on the devices page. It sends a text to the phone and then you should be good.
Hey, after I installed Rataplan v6.0 and tried to activate "Find my phone" in settings > find my phone, it says "Re're still setting up Find My Phone. This will take another moment or two to finish. Come back later to make sure it's been set up, then visit windowsphone.com to use it." It's been saying this since I installed the ROM. What should I do?
EDIT: Found the solution
"Long back story:
Here's what I was previously experiencing:
In Settings, it would list find my phone and have the subtitle "Setup Needed." When I tapped this, it would take me to the find my phone options and immediately display a modal dialog that said it would take a few more minutes to set everything up. When I hit OK, it would back me out of the find my phone settings. This left me completely stuck and no amount of rebooting or fiddling seemed to fix it.
Just now, while I was grabbing another phone to take a picture of the dialog to post here, my phone went to sleep. When I woke it up, the dialog was dismissed and I was in the find my phone options. I checked the first option, Connect to these features faster (may use more battery). I then hit back and the subtitle under find my phone reported connected. I logged into windowsphone.com and my phone is now listed. I simultaneously also received an email from windowsphone.com welcoming me to my new phone. There must be a bug that results in that dialog being dismissed when the phone goes to sleep, and that bug allowed me to toggle the first option, which re-attempted connecting my phone to windowsphone.com.
Anyway, long story short, if you are stuck in this boat, try these steps to work around them:
Set your lock screen timeout to the shortest available duration (1 min?)
Go to settings and tap find my phone.
When the dialog pops up telling you to hold on, set your phone down and leave it be until the screen turns off and the phone goes to sleep.
Turn your phone back on. You should be in the find my phone options now.
Check the first setting, Connect to these features faster (may use more battery).
Back out and verify it says connected and login to windowsphone.com and verify your phone is listed." - found this on windowsphone site, posted by someone. Not my solution.
Hi there,
I installed CM10 (thanks a lot for it by the way) this morning and it seems my display sometimes just activates without reason. At first I only noticed the device being extremely warm, so I check battery usage and 92% of it have been "display". The device went from 95% to about 50% in a matter of a two or three hours with me not using the tablet at all in that time. When I checked again a little later, the display was active, although I am sure I had sent the device to sleep mode.
Also, here are two features I would like to request:
1. Please add a way to rotate the lockscreen
2. Please add Mobile Data as a switch for the quick settings (the one you get to by "clicking" the clock). It is rather annoying to go through the menu to activate / deactivate it...
The.Vortex said:
1. Please add a way to rotate the lockscreen
Click to expand...
Click to collapse
OK, found the fix for that problem... the other one still stands
And I have got an additional issue now:
my Mobile Data Connection doesn't work. My carrier is o2 Germany and the stock ROM had some issues with that carrier as well a while back. Maybe it is the same problem?
For now I am switching back to stock, without mobile data, the tablet is only half as usefull, even with the otherwise better ROM
Add your APN Setting manually and it works nice. They are in the 3G Settings. I even had to just add a almost empty one to make things wake up again.
The.Vortex said:
Hi there,
I installed CM10 (thanks a lot for it by the way) this morning and it seems my display sometimes just activates without reason. At first I only noticed the device being extremely warm, so I check battery usage and 92% of it have been "display". The device went from 95% to about 50% in a matter of a two or three hours with me not using the tablet at all in that time. When I checked again a little later, the display was active, although I am sure I had sent the device to sleep mode.
Also, here are two features I would like to request:
1. Please add a way to rotate the lockscreen
2. Please add Mobile Data as a switch for the quick settings (the one you get to by "clicking" the clock). It is rather annoying to go through the menu to activate / deactivate it...
Click to expand...
Click to collapse
I have actually experienced the opposite--battery has been outstanding since flashing the ROM. I usually turn on Airplane mode when I am not using the phone, and am certain to turn off WiFi as well. Try that and see if it makes a difference. Also, be sure you are charging with an appropriate charger!
emuandco said:
Add your APN Setting manually and it works nice. They are in the 3G Settings. I even had to just add a almost empty one to make things wake up again.
Click to expand...
Click to collapse
Thanks, that solved the 3G issue and, as far as I can tell after one day, the issue with the screen activating, as well.
For the other point, being able to activate / deactivate the mobile data easily, I found Power Toggle (can't post link, just look for it in the play market or remove the blanks: ht tps://play.google. com/store/apps/details?id=com.painless.pc) which can add a widget to the notification area that works great
You can add more switches to the menu popping up when clicking on the clock. Thats what I did. Its in System -> Notification Bar (Or something like that, I use it in German ^^)
Hello all, new to this here.
I've had a Note 3 for quite some time and decided to finally give in to all of this rooting.
By popularity, Alliance ROM seems to be the one to go with.
I managed to get the ROM up and running and I must say this is much better than anticipated.
However, I believe I may have found a bug... if not, I must have done something wrong along the way.
In short, the quick toggles do not reflect any changes. If I turn wifi off, it stays bright green as if its on. Same for any toggle. The only one I see change is the NFC and thats when i switch the s beam on or off (even then it doesnt completely gray itself out, it just goes dim green as if it was changing from on to off, visa versa).
I have wiped and reinstalled the ROM twice with no results.
Is anyone else noticing this? Could it be a fluke?
You have to change the on/off colors manually. It's something that they'll address in the next build but it's a known problem. I forgot how right now but. I'll look for you once I get home.
Settings>custom settings>status bar and toggles> toggle options > toggle icon style
And change it to one that works. Toggles should change immediately and if I remember correctly only one set of toggles worked for me.
Now they all work for me.
Try that and report back.