Moto G XT1032 - Official Motorola Rom - OTA Brazil - Android 5.1.1 (Untouched)
File name: Blur_Version.220.21.28.falcon_umts.Brasil.en.BR.zip
[ download here - mega.nz ]
I hope this helps.
This is surely 5.1 instead of 5.1.1...
Could someone please describe how to install this, and what firmware is required to be installed on?
Can confirm, it works.
220.21.28.falcon_umts is 5.0.2
fonz93 said:
220.21.28.falcon_umts is 5.0.2
Click to expand...
Click to collapse
the way Motorola updates work is that update files are named after the version they are updating from
but this update is indeed 5.1
here is the info from the update script
motorola/falcon_retbr/falcon_umts:5.1/LPB23.13-56/57:user/release-keys
and during the update, it will check if your phone is running the following firmware
motorola/falcon_retbr/falcon_umts:5.0.2/LXB22.46-28/28:user/release-keys
Asia retail - brazil retail difference ?
220.27.1 to 5.1?
Does anyone have the german retail zip to update from 220.27.1.falcon_umts.Retail.en.DE to 5.1?
I don't have the update yet and my system-ui is glitched.
Dnlz said:
Does anyone have the german retail zip to update from 220.27.1.falcon_umts.Retail.en.DE to 5.1?
I don't have the update yet and my system-ui is glitched.
Click to expand...
Click to collapse
Try a factory reset from the stock recovery, or flash 5.0.2 again.
Factory reset
moralesnery said:
Try a factory reset from the stock recovery, or flash 5.0.2 again.
Click to expand...
Click to collapse
Sadly I already performed a factory reset, no luck. Is it possible to flash 5.0.2 with a locked bootloader?
Dnlz said:
Sadly I already performed a factory reset, no luck. Is it possible to flash 5.0.2 with a locked bootloader?
Click to expand...
Click to collapse
Yes, if you have the ROM file you can flash it using mfastboot via fastboot mode, even with a locked bootloader. After flashing you will get an OTA update to 5.1.
Flashing
moralesnery said:
Yes, if you have the ROM file you can flash it using mfastboot via fastboot mode, even with a locked bootloader. After flashing you will get an OTA update to 5.1.
Click to expand...
Click to collapse
Will my data be lost when I re-flash 5.0.2?
Dnlz said:
Will my data be lost when I re-flash 5.0.2?
Click to expand...
Click to collapse
If you use the comand "mfastboot erase userdata" all your files will be deleted. Just dont use that command, save your files on the first boot and then make a factory reset. Doing this will prevent problems with files from the old installation.
Guide
moralesnery said:
If you use the comand "mfastboot erase userdata" all your files will be deleted. Just dont use that command, save your files on the first boot and then make a factory reset. Doing this will prevent problems with files from the old installation.
Click to expand...
Click to collapse
Could you send me a step by step guide on how to do this? So I can do this in a bit.
Ow , Very good :good:
Once you have the 5.0.2 version, move the 5.1 version to the root, then go into the recovery and search it and install it. Good LUCK
Installing
jmfn_007 said:
Once you have the 5.0.2 version, move the 5.1 version to the root, then go into the recovery and search it and install it. Good LUCK
Click to expand...
Click to collapse
When I tried to clean install this over the 5.1 GPE rom, it successfully flashed but I got stuck in bootloop.
What could be the issue? Not that it matters much since I flashed CM instead.
Related
If you Softbricked your phone and are stucked at the Google Unlocked Logo you're right here... the major point of this is to unbrick the phone and not to set it in derivation condition and btw.... unbrick flashing etc at your own risk
Download:
https://drive.google.com/file/d/0B6IdzeLKSZoGX1NzZTlmNVdKeWM/edit?usp=sharing
THIS IS THE GERMAN STOCK ROM MOTOROLA XT1032! IT'S REPORTED THAT THERE COULD BE NO GSM SIGNAL & WIFI!!!!
Hey Guys,
i dont know if this is posted somehere here at the MotoG XDA section....
I tried the MotoG GPe Rom and received an OTA Update to Android 4.4.4 and installed it. After reverting to Motorola stock rom or GPe 4.4.2 the phone stucks in the boot logo and won't boot up anymore.
So here's is MY fix for the problem and i hope i can help some... it's a temporal fix right now to unbrick the half-bricked MotoG for further development
1. Restart Phone in Bootloader
Power + Volume down to enter the bootloader mode and flash the GPe Recovery as *.img file from Philz with fastboot command
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
2. Enter the Recovery Mode
Enter the recovery mode with selecting "Recovery" and hit the volume up to enter it.
In recovery mode you will get some error messages like in the attached phote below. To fix these messages:
Mounts and Storage --> hit "format /cache" and "format /data and /data/media (/sdcard)"
Click to expand...
Click to collapse
3. Push CWM Backup to /sdcard
You have to push a cwm Backup to the /sdcard to restore it later
Download my package with adb and cwm backup and unzip it wherever you want after the extraction and double click at "111 push cwm files to sdcard.bat" to push all need files to tranfer them to the sdcard
adb push boot.img /sdcard/clockworkmod/backup/2014/boot.img
adb push cache.context /sdcard/clockworkmod/backup/2014/cache.context
adb push cache.ext4.tar /sdcard/clockworkmod/backup/2014/cache.ext4.tar
adb push cache.ext4.tar.a /sdcard/clockworkmod/backup/2014/cache.ext4.tar.a
adb push data.context /sdcard/clockworkmod/backup/2014/data.context
adb push data.f2fs.tar /sdcard/clockworkmod/backup/2014/data.f2fs.tar
adb push data.f2fs.tar.a /sdcard/clockworkmod/backup/2014/data.f2fs.tar.a
adb push nandroid.md5 /sdcard/clockworkmod/backup/2014/nandroid.md5
adb push recovery.img /sdcard/clockworkmod/backup/2014/recovery.img
adb push recovery.log /sdcard/clockworkmod/backup/2014/recovery.log
adb push system.context /sdcard/clockworkmod/backup/2014/system.context
adb push system.ext4.tar /sdcard/clockworkmod/backup/2014/system.ext4.tar
adb push system.ext4.tar.a /sdcard/clockworkmod/backup/2014/system.ext4.tar.a
Click to expand...
Click to collapse
4. Restore CWM Backup
Restore the CWM backup from "Restore from /sdcard" select the 2014 folder and confirm... after sucessful restoring you are able to boot up your MotoG
I hope this worked as a temporal fix Feedback or critics are welcome!!!!
fl4m3y said:
Download link will follow in 1 or 2 hours... it's still uploading to my gdrive
Hey Guys,
i dont know if this is posted somehere here at the MotoG XDA section....
I tried the MotoG GPe Rom and received an OTA Update to Android 4.4.4 and installed it. After reverting to Motorola stock rom or GPe 4.4.2 the phone stucks in the boot logo and won't boot up anymore.
So here's is MY fix for the problem and i hope i can help some... it's a temporal fix right now to unbrick the half-bricked MotoG for further development
1. Restart Phone in Bootloader
Power + Volume down to enter the bootloader mode and flash the GPe Recovery as *.img file from Philz with fastboot command
2. Enter the Recovery Mode
Enter the recovery mode with selecting "Recovery" and hit the volume up to enter it.
In recovery mode you will get some error messages like in the attached phote below. To fix these messages:
3. Push CWM Backup to /sdcard
You have to push a cwm Backup to the /sdcard to restore it later
Download my package with adb and cwm backup and unzip it wherever you want after the extraction and double click at "111 push cwm files to sdcard.bat" to push all need files to tranfer them to the sdcard
4. Restore CWM Backup
Restore the CWM backup from "Restore from /sdcard" select the 2014 folder and confirm... after sucessful restoring you are able to boot up your MotoG
I hope this worked as a temporal fix Feedback or critics are welcome!!!!
Click to expand...
Click to collapse
I haven't had the need to try this but I think its good I'm going to stick with CWM for a while until the update for non GPE devices is out or android L..
Sent from my Moto G using XDA Free mobile app
will have a link
Waiting the downlod link :good:
cecoicov said:
will have a link
Click to expand...
Click to collapse
borimol said:
Waiting the downlod link :good:
Click to expand...
Click to collapse
Download Link is online...
Phone works, but does not recognize the SIM card and no WIFI
cecoicov said:
Phone works, but does not recognize the SIM card and no WIFI
Click to expand...
Click to collapse
Can you now flash official 4.4.2 stock (non GPE)?
cecoicov said:
Phone works, but does not recognize the SIM card and no WIFI
Click to expand...
Click to collapse
works fine for me
borimol said:
Can you now flash official 4.4.2 stock (non GPE)?
Click to expand...
Click to collapse
no... flashing with fastboot wont work until we get the GPe Factory Image (I hope) or another fix... this is a "work around" but the problem isn't fixed
after flash with official stock 4.4.2 (non GPE) does phone not start again
cecoicov said:
after flash with official stock 4.4.2 (non GPE) does phone not start again
Click to expand...
Click to collapse
Fastboot flashes doesn't work until there is a real fix... if the stuck on boot logo persist just follw my tutorial to unbrick the phone
Ок, thanks for the help but I guess I will seek another solution
cecoicov said:
Phone works, but does not recognize the SIM card and no WIFI
Click to expand...
Click to collapse
Same issue occurred to me, the IMEI paste seems to be gone rendering the phone useless for (data) network usage. There's no way to restore the IMEI at the moment.
ok this worked for me
started cyanogenmod????????
i could not test wifi or network
but off course i am dumb, and had to try to restore a nandroid backup of gep 4.4.4, i did and phone ask for password (because of encryption of file system), then i tried again to recover using this method and did not worked, used adb gpe 4.4.2, then again this method and nothing
what the hell
firts time could recover, now it wont recover anymore, stays on google logo lol
--------------
some time latter i managed to boot it again
it started stock android in german?'
i believe there is no signal
maurocds said:
some time latter i managed to boot it again
it started stock android in german?'
i believe there is no signal
Click to expand...
Click to collapse
It's the open german version without any provider stuff... i cant upload th english version because i cant flash via fastboot. the only possibility is to install an english custom rom via cwm. therfore you need to replace the GPe CWM recovery to normal philz recovery because of the filesystem
fl4m3y said:
It's the open german version without any provider stuff... i cant upload th english version because i cant flash via fastboot. the only possibility is to install an english custom rom via cwm. therfore you need to replace the GPe CWM recovery to normal philz recovery because of the filesystem
Click to expand...
Click to collapse
hey man, i sent you a PM, read it fast
-----------
ok i booted my phone again after flashing this, then flashing gpe, then this again lol
you have to be patient while pushing the data, it takes a lot, then after that, you must disable md5 on recovery or else it will fail, then you can restore cwm fine and boot
firmware is stock 442 german, but you can change into english
thanks, no matter what i tried i never could boot
at least the phone work,
have to test more about signal stuff
Due to some personal information (google account) i was forced to deactivate the public access to the file.... password changed of my account and now it should be fine
so download is activated again
Hey,
I´ve been using GPE 4.4.4 recently too and I wanted to go back to German retail 4.4.2. in order to try to catch an OTA. It´s quite easy to do, just beware of one thing. You have to RETAIN the partition table (gpt.bin) from GPE. Do not flash gpt.bin from the target firmware - 4.4.2 in this case, just avoid the step "fastboot flash partition gpt.bin". If you did it already, you can try following: extract gpt.bin from GPE 4.4.4 OTA zip and copy it and replace gpt.bin in your 4.4.2 firmware folder and then flash it using standard procedure.
Also maybe the same thing applies to logo.bin, but of this one I´m not sure. I avoided to flash it too just in case. Now I´m on fully working German retail 4.4.2. No OTA yet, though, but that´s another story.
anyone has the gpt.bin from the GPe 4.4.4????
I want to flash via fastboot the GPe 4.4.2 Version and after the OTA Update to 4.4.4
and btw... thank you for the hint!!!!
View attachment gpt.7z
fl4m3y said:
anyone has the gpt.bin from the gpe 4.4.4????
I want to flash via fastboot the gpe 4.4.2 version and after the ota update to 4.4.4
and btw... Thank you for the hint!!!!
Click to expand...
Click to collapse
from ota gpe 444
drfr said:
Hey,
I´ve been using GPE 4.4.4 recently too and I wanted to go back to German retail 4.4.2. in order to try to catch an OTA. It´s quite easy to do, just beware of one thing. You have to RETAIN the partition table (gpt.bin) from GPE. Do not flash gpt.bin from the target firmware - 4.4.2 in this case, just avoid the step "fastboot flash partition gpt.bin". If you did it already, you can try following: extract gpt.bin from GPE 4.4.4 OTA zip and copy it and replace gpt.bin in your 4.4.2 firmware folder and then flash it using standard procedure.
Also maybe the same thing applies to logo.bin, but of this one I´m not sure. I avoided to flash it too just in case. Now I´m on fully working German retail 4.4.2. No OTA yet, though, but that´s another story.
Click to expand...
Click to collapse
THIS DID NOT WORK FOR ME
I AM ON 4.4.4 gpe
AND JUST WANTED TO TEST
so i put the 4.4.4 ota gpt.bin in the stock 4.4.2 image , and the stock gpe 4.4.2, and both flashes were stuck on logo, did not booted,
Hi all,
Just got the notification to update my french Moto X (2014) XT1092.
Here is the link
LINK
Just flash it via stock recovery.
WARNING : The update will only succeed if you have a RETEUALL or RETIN XT1092 (it won't work for RETGB and RETDE) AND an untouched sytem (no root, xposed, or removed system apps...)
If you have a RETGB or RETDE, no worries you'll just need to convert your phone into a RETEUALL.
Here is how to do this :
1) You'll need an unlocked bootloader, as well as fastboot and adb drivers installed on your computer.
2) First you'll need to download the RETEUALL factory image : here and extract it.
3) Then you'll need to execute each command in a terminal window
Code:
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
4) After that you'll be able to take the OTA
benfiller said:
Hi all,
Just got the notification to update my french Moto X (2014) XT1092.
Here is the link
LINK
Will post screenshots as soon as the OTA finishes
Edit : OTA finished
Click to expand...
Click to collapse
I am getting below mentioned error
<Error>
<Code>ExpiredToken</Code>
<Message>The provided token has expired.</Message>
<Details>Request has expired: 1418383039</Details>
</Error>
Is it the same as the UK version?
Mine says retgb instead of reteu.
Sent from my XT1092 using Tapatalk
Cheers for this, but it looks like the link is down?
I got the file,
but once I try to sideload, it complaints that the fingerprint is not the same.
Yeah, the link is expired. I will mirror it as soon as I can !
You must have a completely untouched (no root, no xposed, no removed system apps etc...) system to pass the OTA.
mcnovy said:
I got the file,
but once I try to sideload, it complaints that the fingerprint is not the same.
Click to expand...
Click to collapse
what's your version retin reteu ????
nandroidz said:
what's your version retin reteu ????
Click to expand...
Click to collapse
21.21.45.victara_retde.retdeall.en.DE.retde
bought in Germany
i think its bcos urs is retde.retdeall
benfiller said:
Yeah, the link is expired. I will mirror it as soon as I can !
You must have a completely untouched (no root, no xposed, no removed system apps etc...) system to pass the OTA.
Click to expand...
Click to collapse
Are these steps the enough to revert the change or do I have to factory reset (I am asking because as far as I know Motorola haven't released factory images for variants other than XT1095)?
1) uninstall xposed through the app then remove the app itself with other modules.
2) completely remove root through SuperSu (Full unroot option).
3) restore stock recovery (link please if possible?)
4) I didn't add or remove system apps other than SuperSu
Thanks,
hasm_747 said:
Are these steps the enough to revert the change or do I have to factory reset (I am asking because as far as I know Motorola haven't released factory images for variants other than XT1095)?
1) uninstall xposed through the app then remove the app itself with other modules.
2) completely remove root through SuperSu (Full unroot option).
3) restore stock recovery (link please if possible?)
4) I didn't add or remove system apps other than SuperSu
Thanks,
Click to expand...
Click to collapse
I'll upload a twrp backup of my stock untouched 4.4.4 system+boot
hey thanks a lot for the link. Its working on my Moto X XT1092 indian version.
benfiller said:
I'll upload a twrp backup of my stock untouched 4.4.4 system+boot
Click to expand...
Click to collapse
Thanks mate,
So after flashing this backup. Do I have to restore the stock recovery or is that not required for the update?
hasm_747 said:
Thanks mate,
So after flashing this backup. Do I have to restore the stock recovery or is that not required for the update?
Click to expand...
Click to collapse
Yes, you'll need stock recovery to do the update.
I'll post it to with the twrp backup
New link is up, check the OP
benfiller said:
New link is up, check the OP
Click to expand...
Click to collapse
Doesn't work for me
Sent from my XT1092 using XDA Free mobile app
undeadadd said:
Doesn't work for me
Sent from my XT1092 using XDA Free mobile app
Click to expand...
Click to collapse
OTA or link ? The link works fine for me, either on phone or computer
benfiller said:
OTA or link ? The link works fine for me, either on phone or computer
Click to expand...
Click to collapse
The links not working on my phone lol
Sent from my XT1092 using XDA Free mobile app
undeadadd said:
The links not working on my phone lol
Sent from my XT1092 using XDA Free mobile app
Click to expand...
Click to collapse
Weird, what does it say ?
benfiller said:
Weird, what does it say ?
Click to expand...
Click to collapse
<Error>
<Code>ExpiredToken</Code>
<Message>The provided token has expired.</Message>
<Details>Request has expired: 1418383039</Details>
</Error>
Sent from my XT1092 using XDA Free mobile app
DO NOT RESTORE BACK TO 4.4. THIS WILL BRICK YOUR PHONE.
--UPDATE--
JUST FLASH THIS! (In stock recovery) https://drive.google.com/file/d/0B1xF6uYPZz7AMW1DUTU1X1poV2s/view
--
(if the above doesn't work, or if you are not on totally stock, use the following method)
Here is how to upgrade from 23.11.14 to 23.16.3
What you need: https://yadi.sk/d/cBaKACE7hQH9Y (upgrade from stock 5.0 to 23.16.3)
http://www.graffixnyc.com/motox.php (stock 5.0 image. You need to use this one. The one found in Motorola's site WILL NOT WORK WITH THIS METHOD)
Unzip the stock 5.0 image
Boot into fastboot
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
Boot into recovery
adb sideload Blur_Version.22.21.11.victara_tmo.tmo.en.US.zip
reboot!
can i only update via adb sideload ? from 23.11.14 to 23.16.3 ?? without back to stock 5.0 ?
Grzesiek1010 said:
can i only update via adb sideload ? from 23.11.14 to 23.16.3 ?? without back to stock 5.0 ?
Click to expand...
Click to collapse
if you're on 23.11.14 you have to go back to 5.0 in order to update to the newest 5.1 (23.16.3).
You can also copy the zip over and flash within recovery, if you prefer. I always think sideload is easier (though actually, now that I think about it, I copied it over and flashed from within recovery myself...)
bongostl said:
if you're on 23.11.14 you have to go back to 5.0 in order to update to the newest 5.1 (23.16.3).
You can also copy the zip over and flash within recovery, if you prefer. I always think sideload is easier (though actually, now that I think about it, I copied it over and flashed from within recovery myself...)
Click to expand...
Click to collapse
ok but what with all apps data setting ?
Grzesiek1010 said:
ok but what with all apps data setting ?
Click to expand...
Click to collapse
you have to do a full wipe.
if you're rooted, you could do a titanium backup, etc...
bongostl said:
you have to do a full wipe.
if you're rooted, you could do a titanium backup, etc...
Click to expand...
Click to collapse
better wait for official update too much risk lost data ...
I successfully downgraded to 5.0, and I've attempted the sideload method twice and failed. Each time it says there is an error in the package, status 7. I get the same result when I apply update from sd card. Any ideas?
---------- Post added at 12:25 PM ---------- Previous post was at 11:43 AM ----------
Be advised: some of us are discovering you can't do the OTA to 23.16.3 if you are on 5.0 46_11.11. Apparently you need to be on 5.0 46_11.10.
Use the files I posted.... That's what I used
It's necessary to downgrade to 5.0, even if I'm getting an OTA system update popup from 23.11.14?
leffer said:
It's necessary to downgrade to 5.0, even if I'm getting an OTA system update popup from 23.11.14?
Click to expand...
Click to collapse
If you're on 23.11.14 and you're getting the OTA alert for 23.16.3, then no you don't have to downgrade. Just take the OTA. You should try to capture the OTA if you're rooted
sivarticus85 said:
If you're on 23.11.14 and you're getting the OTA alert for 23.16.3, then no you don't have to downgrade. Just take the OTA. You should try to capture the OTA if you're rooted
Click to expand...
Click to collapse
I am rooted... How do I capture the OTA?
Sent from my XT1095 using XDA Forums
leffer said:
I am rooted... How do I capture the OTA?
Sent from my XT1095 using XDA Forums
Click to expand...
Click to collapse
The OTA is downloaded to the /cache folder. Copy it from your phone to a computer. Can you take a screenshot of the OTA alert?
Success!
Stanleywinthrop said:
Be advised: some of us are discovering you can't do the OTA to 23.16.3 if you are on 5.0 46_11.11. Apparently you need to be on 5.0 46_11.10.
Click to expand...
Click to collapse
I had this problem initially as well because I downgraded to 5.0 using the official Motorola 5.0 firmware downloaded from the Motorola website, which is apparently 46-11.11.
I had to use this one-day-older version instead, which is apparently 46-11.10: TMO_XT1095_5.0_LXE22.46-11_cid9_CFC.xml.zip. I found it and downloaded it from here: http://motofirmware.center/files/file/76-tmo_xt1095_50_lxe2246-11_cid9_cfcxmlzip/
So... I downloaded the firmware from that link, followed the OP instructions almost exactly*, and I was able to upgrade from 23.11.14 to 23.16.3 successfully.
* One change I had to make from OP instructions: The pieces of system image had an extra period before the piece number, so I needed to retype those commands like this: fastboot flash system system.img_sparsechunk.0 ...etc.
thenestor said:
I had this problem initially as well because I downgraded to 5.0 using the official Motorola 5.0 firmware downloaded from the Motorola website, which is apparently 46-11.11.
I had to use this one-day-older version instead, which is apparently 46-11.10: TMO_XT1095_5.0_LXE22.46-11_cid9_CFC.xml.zip. I found it and downloaded it from here: http://motofirmware.center/files/file/76-tmo_xt1095_50_lxe2246-11_cid9_cfcxmlzip/
So... I downloaded the firmware from that link, followed the OP instructions almost exactly*, and I was able to upgrade from 23.11.14 to 23.16.3 successfully.
* One change I had to make from OP instructions: The pieces of system image had an extra period before the piece number, so I needed to retype those commands like this: fastboot flash system system.img_sparsechunk.0 ...etc.
Click to expand...
Click to collapse
thanks for your help. I tried to download from your link and for some reason the file will not extract. However, I noticed that your image file is named exactly as the image file linked in the OP to this thread. Are they one in the same?
sivarticus85 said:
The OTA is downloaded to the /cache folder. Copy it from your phone to a computer. Can you take a screenshot of the OTA alert?
Click to expand...
Click to collapse
Here is my current version... http://imgur.com/ae2O6PW
Here is my OTA notification... http://imgur.com/hZZB0DZ
The file name is Blur_Version.23.11.14.victara_tmo.tmo.en.US.zip - is that weird?
Here is a link to the file: https://drive.google.com/file/d/0B1xF6uYPZz7AMW1DUTU1X1poV2s/view?usp=sharing
File Size: 163.7MB
MD5: d8c44d25d0479ef40ad5f092ff7ffd39
I'm sure this upload is gonna get flagged in no time on Google Drive... So somebody else should upload it if possible.
And...success finally. FYI you cannot use the method found in the OP to update the stock 5.0 image from motorola's website. You MUST use the stock image found in the OP.
thenestor said:
* One change I had to make from OP instructions: The pieces of system image had an extra period before the piece number, so I needed to retype those commands like this: fastboot flash system system.img_sparsechunk.0 ...etc.
Click to expand...
Click to collapse
Good catch! I have fixed the original post
Stanleywinthrop said:
And...success finally. FYI you cannot use the method found in the OP to update the stock 5.0 image from motorola's website. You MUST use the stock image found in the OP.
Click to expand...
Click to collapse
I've updated the original post to make this clearer.
anyone able to root this new OTA?
CF auto root was working on every previous OTA from 4.4 to 5.0 and 5.1 but now causes boot loops. I am able to TWRP back to the unrooted build to get me out of the bootloops.
leffer said:
Here is my current version... http://imgur.com/ae2O6PW
Here is my OTA notification... http://imgur.com/hZZB0DZ
The file name is Blur_Version.23.11.14.victara_tmo.tmo.en.US.zip - is that weird?
Here is a link to the file: https://drive.google.com/file/d/0B1xF6uYPZz7AMW1DUTU1X1poV2s/view?usp=sharing
File Size: 163.7MB
MD5: d8c44d25d0479ef40ad5f092ff7ffd39
I'm sure this upload is gonna get flagged in no time on Google Drive... So somebody else should upload it if possible.
Click to expand...
Click to collapse
Thanks! And no, the name is normal. The OTA filename always states the version you need to be on to install it, not the version that it contains.
It's out. Download factory images on the official site. Yay!
Link : https://developers.google.com/android/ota#top_of_page
changelog? does it fix the battery loss over night?
i have a question.
i'm on N5D91L with twrp installed. do i have to flash NRD91P and then NMF26F or can i skip the NRD91P?
thanks for the help!
Turtl3z said:
i have a question.
i'm on N5D91L with twrp installed. do i have to flash NRD91P and then NMF26F or can i skip the NRD91P?
thanks for the help!
Click to expand...
Click to collapse
You don't have to flash NRD91P. Android updates are always cumulative; you never have to flash versions other than the latest.
I am on official 7.0 right now. Is it possible to go the easy route and just flash Cache, System and Vendor img? Don't wanna reflash TWRP/root.
chinesecooler said:
I am on official 7.0 right now. Is it possible to go the easy route and just flash Cache, System and Vendor img? Don't wanna reflash TWRP/root.
Click to expand...
Click to collapse
don't need to flash cache. just flash boot, system and vendor and you should be good to go.
metpage said:
don't need to flash cache. just flash boot, system and vendor and you should be good to go.
Click to expand...
Click to collapse
Thanks but I am trying to avoid flashing boot.img as it means I will have to flash recovery and root again.
chinesecooler said:
Thanks but I am trying to avoid flashing boot.img as it means I will have to flash recovery and root again.
Click to expand...
Click to collapse
You can use flashfire to save root
sideloading now
EDIT: done and running.
chinesecooler said:
Thanks but I am trying to avoid flashing boot.img as it means I will have to flash recovery and root again.
Click to expand...
Click to collapse
You wouldn't have a working camera if you skip out on flashing the 7.1.1 boot.img.
Sent from my Nexus 5X using Tapatalk
Same radio same bootloader as previous versions or need to upgrade ?
Thanks all. I was stuck at the boot animation after only doing Cache, System & Vendor.
Had to reflash the whole set (except userdata), TWRP and SU.
For anyone worried about re-rooting and all... Download the Full Firmware package and flash it with FlashFire, just did it and it works perfectly, if you have any mods like the google assistant or "surround sound" mod, you will need to re-flash them but thats all.... easy as pie....
EDIT.... You will also need to re-do your build.prop edits if you did any....
I actually cant upgrade to nougat it always shows error 7 so i have read somewhere that doing modification in software status (had flashed xelemental kernel) doesn't allows u to flash from recovery so I need a stock kernel for my moto g4 plus xt 1643 can someone provide a link to download it and tell me how to flash it and i wanna make my software status official
There are clearly-labeled threads that describe how to return to stock. Please look for them.
Sent from my Moto G4 Plus using Tapatalk
bmeek said:
There are clearly-labeled threads that describe how to return to stock. Please look for them.
Click to expand...
Click to collapse
I flashed a new firmware but the status modified thing isn't going i however wanna make it official
Nik11_98 said:
I flashed a new firmware but the status modified thing isn't going i however wanna make it official
Click to expand...
Click to collapse
To make it Official:
If you're rooted, first of all undo any system changes you made and unroot.
Then restore the boot partition backup of Stock Nougat 7.0 build NPJ25.93-14 via twrp. See it here:
https://forum.xda-developers.com/moto-g4-plus/how-to/n7-0-twrp-backup-stock-boot-partition-t3550001
Flash Stock Recovery via fastboot:
https://drive.google.com/open?id=0B25DpDahxm52b0VKWGFKSXM1LUk
Do a factory reset after you've done this and check the status on the bootloader.
Else flash Stock ROM Nougat 7.0 NPJ25.93-14 via fastboot:
https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-xt1640-43-athene-npj25-93-t3549369
Or if you're reluctant in flashing the above via fastboot, you can restore entire stock ROM backup via twrp..followed by flashing stock recovery and a reset. :
https://forum.xda-developers.com/moto-g4-plus/how-to/android-7-0-moto-g4-plus-npj25-93-14-t3544601
tywinlannister said:
To make it Official:
If you're rooted, first of all undo any system changes you made and unroot.
Then restore the boot partition backup of Stock Nougat 7.0 build NPJ25.93-14 via twrp. See it here:
https://forum.xda-developers.com/moto-g4-plus/how-to/n7-0-twrp-backup-stock-boot-partition-t3550001
Flash Stock Recovery via fastboot:
https://drive.google.com/open?id=0B25DpDahxm52b0VKWGFKSXM1LUk
Do a factory reset after you've done this and check the status on the bootloader.
Else flash Stock ROM Nougat 7.0 NPJ25.93-14 via fastboot:
https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-xt1640-43-athene-npj25-93-t3549369
Or if you're reluctant in flashing the above via fastboot, you can restore entire stock ROM backup via twrp..followed by flashing stock recovery and a reset. :
https://forum.xda-developers.com/moto-g4-plus/how-to/android-7-0-moto-g4-plus-npj25-93-14-t3544601
Click to expand...
Click to collapse
Hey thanks for ur help i flashed it , it said successfully flashed but i doesn't boots up in system and when i went to bootloader its the same stuff system status modified !!i tried to flash nougat zip but it showed me the same error
Check this ss
Nik11_98 said:
Hey thanks for ur help i flashed it , it said successfully flashed but i doesn't boots up in system and when i went to bootloader its the same stuff system status modified !!i tried to flash nougat zip but it showed me the same error
Click to expand...
Click to collapse
The stock ROM is to be flashed via fastboot and the Nougat update ota zip can be flashed by stock Recovery only.
tywinlannister said:
The stock ROM is to be flashed via fastboot and the Nougat update ota zip can be flashed by stock Recovery only.
Click to expand...
Click to collapse
But bro my system software isn't official !
Nik11_98 said:
But bro my system software isn't official !
Click to expand...
Click to collapse
Flash Stock Nougat 93-14 via fastboot, do a factory reset!!!
tywinlannister said:
Flash Stock Nougat 93-14 via fastboot, do a factory reset!!!
Click to expand...
Click to collapse
Okay will try and let u know
tywinlannister said:
Flash Stock Nougat 93-14 via fastboot, do a factory reset!!!
Click to expand...
Click to collapse
Can you please provide me a link for that stock nougat i couldn't find it
Nik11_98 said:
Can you please provide me a link for that stock nougat i couldn't find it
Click to expand...
Click to collapse
https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-xt1640-43-athene-npj25-93-t3549369
tywinlannister said:
https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-xt1640-43-athene-npj25-93-t3549369
Click to expand...
Click to collapse
Thanks alot bro I'm finally on nougat