I have unlocked the bootloader using fastboot command and have tried flashing CWM, TWRP, and Phillz to no use.
When trying to install the "snapshot" zip of 12.1 booting through the snapshot recovery image, it says can't install this package on top of incompatible data. Please try another package or factory reset.
What do I do?
My whole aim is to install the 12.1 "snapshot" release.
Related
im trying to flash TWRP over the official cwm that i have now because i want to flash the 4.4 paranoid rom BUT, it bootloops and requires TWRP. how can i flash twrp back on my G2? when i try to flash the TWRP zip in recovery it tells me failed and when i try flashify, it just keeps flashing but nothing happens.
Thank you
While starting to upgrade from CM10 to CM10.2/10.3 on MB526, I flashed TWRP zip file downloaded from Team-win website.
steps:
1) downloaded recovery and copied to SDcard.
2) reboot into custom recovery (CWM)
3) Flash zip of TWRP recovery
Since than, I am getting black screen after clicking on custom recovery from Bootmenu.
Device is working fine,
but with no custom recovery, my hands are tied...
can't restore backup, can't flash rom or do anything..
tried installing zip from stock recovery.. Installation aborted appears
Is there any solution to get recovery working without starting from scratch (flashing SPF and 2ndinit, and so on.... )
warewolf4586 said:
While starting to upgrade from CM10 to CM10.2/10.3 on MB526, I flashed TWRP zip file downloaded from Team-win website.
steps:
1) downloaded recovery and copied to SDcard.
2) reboot into custom recovery (CWM)
3) Flash zip of TWRP recovery
Since than, I am getting black screen after clicking on custom recovery from Bootmenu.
Device is working fine,
but with no custom recovery, my hands are tied...
can't restore backup, can't flash rom or do anything..
tried installing zip from stock recovery.. Installation aborted appears
Is there any solution to get recovery working without starting from scratch (flashing SPF and 2ndinit, and so on.... )
Click to expand...
Click to collapse
I think stock recovery can't help you now, you should start from scratch...
It isn't so hard, just takes time...
From CM10 to CM10.2, you don't need to change recovery, just install it. From CM10.2 to CM11 you should install update-recovery.zip, reboot, install CM11 + GApps.
Hope it helps... :highfive:
warewolf4586 said:
While starting to upgrade from CM10 to CM10.2/10.3 on MB526, I flashed TWRP zip file downloaded from Team-win website.
steps:
1) downloaded recovery and copied to SDcard.
2) reboot into custom recovery (CWM)
3) Flash zip of TWRP recovery
Since than, I am getting black screen after clicking on custom recovery from Bootmenu.
Device is working fine,
but with no custom recovery, my hands are tied...
can't restore backup, can't flash rom or do anything..
tried installing zip from stock recovery.. Installation aborted appears
Is there any solution to get recovery working without starting from scratch (flashing SPF and 2ndinit, and so on.... )
Click to expand...
Click to collapse
Start from scrach >.>
I installed the twrp 3.0.2.2 and after installed a kernel which made the phone stuck on zte logo.
I tried to flash to the stock files using this guide:
https://forum.xda-developers.com/axon-7/how-to/a2017g-nougat-b08-twrp-bootstack-t3696479v
but when i try to install the superSu the twrp stuck after extracing files, then the phone just shuts down.
what can I do?
Shakedbuk said:
I installed the twrp 3.0.2.2 and after installed a kernel which made the phone stuck on zte logo.
I tried to flash to the stock files using this guide:
https://forum.xda-developers.com/axon-7/how-to/a2017g-nougat-b08-twrp-bootstack-t3696479v
but when i try to install the superSu the twrp stuck after extracing files, then the phone just shuts down.
what can I do?
Click to expand...
Click to collapse
Update your twrp, there's no need to use that old version... my phone reboots when it wants when it has opd twrp versions
Download twrp 3.1.1-0
Put it on your phone, maybe via adb or through mtp if you have it
Go to Install -> hit the button on the right that says 'Install image'
Find the TWRP.img and install it, it will prompt you where to install it, put 'recovery'
Followed you instructions, but now i cant get into TWRP or the OS ):
Tried to flash it with axon7tool on pc, but got the same result, but when I tried to flash the 3.0.2. again, it worked.
Shakedbuk said:
Followed you instructions, but now i cant get into TWRP or the OS ):
Tried to flash it with axon7tool on pc, but got the same result, but when I tried to flash the 3.0.2. again, it worked.
Click to expand...
Click to collapse
Don't use axon7tool for this... you already have TWRP, the only thing you have to use axon7tool for is to install twrp when you have the stock recovery. after you have twrp on the phone just try not to use the PC except for maybe miflash
I tried both of this options.
Flashing new version of twrp through the old twrp resulted in black screen when i try to get to recovery.
So I flashed the old twrp from the pc, tried to flash the new one using the same method but it the same as i flashed it through the old twrp. (which mean that when i get to the recovery i get black screen)
ATM the situation is the same, system wont boot stuck on zte logo, twrp is 3.0.2.2 (there is another method to flash newer twrp?)
There is another option?
After wiping system in twrp i was able to install supersu, which means i completed this guide
https://forum.xda-developers.com/axon-7/how-to/a2017g-nougat-b08-twrp-bootstack-t3696479v
but still stuck on zte logo after i reboot , any help?
Shakedbuk said:
After wiping system in twrp i was able to install supersu, which means i completed this guide
https://forum.xda-developers.com/axon-7/how-to/a2017g-nougat-b08-twrp-bootstack-t3696479v
but still stuck on zte logo after i reboot , any help?
Click to expand...
Click to collapse
Wait, what did you do? Did you install everything again after wiping system?
Ya, afte i wiped the system it allowed me to install the supersu without interrupts, but it did not helped.
Anyway i manged to install purefusion os, system booted up, after that the new twrp updated successfully.
Shakedbuk said:
Ya, afte i wiped the system it allowed me to install the supersu without interrupts, but it did not helped.
Anyway i manged to install purefusion os, system booted up, after that the new twrp updated successfully.
Click to expand...
Click to collapse
You installed SuperSU without a system, and the phone did not boot up? Amirite?
what i did was wipe system dalvik cache, cache, after that install bootstack and the system files, and after that the supersu.
before i wiped the system, when i tried to install the supersu the twrp collapsed, after that it installed it but did not helped to make the system boot.
I formatted my Oneplus 6t and was able to install TWRP, but when I install the zip for LineageOS, instead of installing it as the OS, it just replaces the TWRP recovery with a Lineage one, and I am still unable to boot into system.
Yanagibashi said:
I formatted my Oneplus 6t and was able to install TWRP, but when I install the zip for LineageOS, instead of installing it as the OS, it just replaces the TWRP recovery with a Lineage one, and I am still unable to boot into system.
Click to expand...
Click to collapse
What version of twrp are you using? Did you use the twrp installer when installing twrp?
Yanagibashi said:
I formatted my Oneplus 6t and was able to install TWRP, but when I install the zip for LineageOS, instead of installing it as the OS, it just replaces the TWRP recovery with a Lineage one, and I am still unable to boot into system.
Click to expand...
Click to collapse
Solution is simple. After you flash ROM ZIP flash TWRP Installer ZIP again. Flashing ROM only Replaces TWRP with the Stock Recovery. As for why it didn't boot, there can be a number of reasons why. You'll have to explain some more so that we can help you
Lineage has it's own recovery included, that's normal. You need to reflash TWRP. Make sure you are using 3.3.1-6 or 3.3.1-7 (the latest versions) either will work.
TWRP Link in case you don't have it.
6T Lineage Install Instructions , I also have update instructions at the bottom, as the initial install is different. (It says to back everything up, as you will wipe everything, and lose all data)
I always flash the rom twice. Flash rom and TWRP, reboot recovery and flash rom and TWRP again. Reboot recovery, wipe(first option don't wipe data), flash magisk, gapps or anything else then reboot system.
I succesfully installed TWRP when phone had stock ROM.
I booted into it, and i flashed CM11
And after that, i couldn't go into TWRP anymore.
I tried flashing diffrent versions of TWRP, and even CWM but still it doesn't boot into recovery
I tried to reboot advanced options, to reboot into recovery from CM11, but still, it doesn't reboot into it, it just hangs at "rebooting to recovery"
I know key combinations, because i flashed CM11 via TWRP, but suddenly it dissapeared.
I don't want to reflash stock ROM, because of this, in fact, i just want to flash zip file, fde.ai , but recovery is not available, so i can't flash it.
I tried flashify, and rashr, they all don't do their job as adversited.
So my only fix is , to somehow bring back TWRP into which i can't boot