Fingerprint scanner failed to load - Galaxy Note 4 Q&A, Help & Troubleshooting

I have installed custom rom on my Note 4 910C, but after that finger print scanner is not working, it says "Fingerprint scanner failed to load. Please reboot and try again”. can any body help me with this, as i have factory reset also. still not working :crying:
ROM: eRobot ROM for Note4 V.8.2 XXU1COH4 Android 5.1.1 MultiCSC Aroma {sep04}
http://forum.xda-developers.com/note-4/development/erobot-rom-note4-n910c-7-xxu1bog1-t3174248

Sharjeel97 said:
I have installed custom rom on my Note 4 910C, but after that finger print scanner is not working, it says "Fingerprint scanner failed to load. Please reboot and try again”. can any body help me with this, as i have factory reset also. still not working :crying:
ROM: eRobot ROM for Note4 V.8.2 XXU1COH4 Android 5.1.1 MultiCSC Aroma {sep04}
http://forum.xda-developers.com/note-4/development/erobot-rom-note4-n910c-7-xxu1bog1-t3174248
Click to expand...
Click to collapse
Dont worry it cuz ROM 5.1.1 need to fix that bug...Use 5.0.1 ROMs if u want fingerprnt

Fingerprint working perfectly on Wanam 5.1.1-ROM
sent from somewhere

Related

need fingerprint APK

just clean flashed xtrlite lollipop BNL7 BETA 2 super debloated. and it didnt seem to have a finger print apk. do you have it guys? thanks
Seems there is a problem with finger scanner in latest version. Check official thread for details.

Note 3 (N9005) auto rotation does not work for any CFW

Dear Community,
I hope that this is the right place to post and any of you can help me.
My (aktual) Hardware/Software bits:
Galaxy Note 3 (SM-N9005)
Android: 5.1.1
Baseband-Version: N9005XXUGBOD3
Kernel-Version 3.4.108-f2fs-temasek-cm12.1-hlte-v1.25+
temaseksnappy #1
Temasek unofficial version V16.4
Build: LMY48J test-keys
Recovery: twrp 2.8.7.0-hlte-4.4
My actual problem is the following: My Note 3 by default had a 4.4.2 OFW on it, which I early upgraded to Lolipop 5.0.1. Everything works for the OFW 4.4.2 and 5.0.1 fine. As soon as I try to flash it with a CFW like CM11, CM12, CM12.1, CM12.1 (temaseksnappy), Gummy 4.4.4 I am losing the feature of auto rotation.
Of cource I did a clean flash, wiping DALVIK/CACHE/DATA and system, double time even one befor the flash, one after.
I also tried to put the battery, sim and sd out for few min before rebooting, while autorotation is manualy turned off.
Even a MODEM I flushed to fix this issue, but without success. Nothing helps but going back to OFW.
My last try was downgrading to the original 4.4.2, including baseband trieing from there to go to any CFW (CM11) as well as from OFW 4.4.2 -> OFW 5.0.1 -> CFW 5.1.1 (http://forum.xda-developers.com/galaxy-note-3/development/hlte-spr-vzw-temaseks-unofficial-t2953375)
There was also a post about a possible missing or broken lib in /system/lib which I replaced
Nothing helps (libGNU... something). This helped me alreay once in OFW after kicking out all the junk apps, but this is a different storry and not related anyhow.
Is there anybody out there who has the same problem or even better knows a solution?
My shot would be that:
1) CM has a problem with my particular hard-/software (Kernel, Baseband, Recovery, whatever) as I just tied CM or at least CM based CFWs.
PLEASE HELP.
Thank you very much in advance.
After about almost a year I cam back, giving again a try to CM, However I still have the same issue. Finally Anybody please!
Do you have the same issue with touchwiz 5.1.1 and 6.0.1?. Not the cm/aosp roms which aren't samsung based.
Sent from my SM-N920C
Rosli59564 said:
Do you have the same issue with touchwiz 5.1.1 and 6.0.1?. Not the cm/aosp roms which aren't samsung based.
Sent from my SM-N920C
Click to expand...
Click to collapse
Hello,
Thx for your reply. Right now I am on CM13 (temasek hlte v9.6)
http://forum.xda-developers.com/galaxy-note-3/development/hlte-spr-vzw-temaseks-unofficial-t2953375
This might should be specially compiled for sm-n9005 like mine.
Everything expect rotation works fine. However The accelleration is also working fine as I tested with "sensor test". Even the integrated camera App is rotating, however the rest is not.
In addition I downloaded "adaptive rotationfree", If I set it "stock Auto" nothing happens, but if I set it to "force auto" the rotation will work exacly once and then stops undtil I force it to portrait again.
What do you mean exactly with "touchwiz"? Is this jus a different kernel or a whole CFW?
As I wrote in the frist post I tried already a lot of CFW and ALL had this issue, but the OFW ;(
What shell I flush to get this working, which is not OFW?
BIG THX for YOUR HELP
Touchwizz is the firmware that comes with the stock Samsung firmware .
Also in custom Samsung based roms .
Hello,
thx for the tip with TouchWiz vs aosp. At the moment I am running "DarkLord N5 Release Candidate 2.12" which can get find here: http://forum.xda-developers.com/galaxy-note-3/development/rom-darklord-s6-port-alpha-t3083087
This Rom is TouchWiz Based and guess what ....
Autorotation works.
However I do not understand what the problem realy is and would prefer to run cm13 insteat. I mean even samsung devices got a accellerator within which works also fine with AOSP software, showing numbers moving while turning the phone. In addition for example on the post http://forum.xda-developers.com/galaxy-note-3/development/hlte-spr-vzw-temaseks-unofficial-t2953375 it is said that this is explicite for note 3 including the model n9005. So ...
Can anybody point me to the problem or even better to the fix?
Is there any chance CM would fix this?
Regards

How to flash CM13 or AOSP with working GOODIX and all CAMERAS (Sanpdragon)

Hey i tryed long by my self with my new note3 pro
This is how i got all working for me
- unlock bootloader officially
- Flash official TWRP
- Wipe all
- Flash CM13 Firmware then reboot recovery!!! (The Strix)
- Flash CM13 or AOSP 6.0.1 Rom
- Flash latest open Gapps
- Flash Goodix_FP_8
- Flash AgNi Pure CM kernel or Radon 2.9
- Flash CM13Radio ------> important! or you stuck in a bootloop at some roms (The Strix)
Hope i helped some people with this :fingers-crossed:
There you go for fp8 https://yadi.sk/d/YX644C9UvjMNj
and here is Radio https://drive.google.com/file/d/0B2CgYqnPbCh_RnJDaHJtdEFYRGM/view
Remember this is not my work. I post this, to help all others who got stucked like me.
Just wanna save those guys some time!
Can you give download link.. For goodix fp8 and cm13radio, i only have cm 13 firmware. I will try in rombased cm13. Thanks before
illall said:
Can you give download link.. For goodix fp8 and cm13radio, i only have cm 13 firmware. I will try in rombased cm13. Thanks before
Click to expand...
Click to collapse
There you go for fp8 https://yadi.sk/d/YX644C9UvjMNj
and here is Radio https://drive.google.com/file/d/0B2CgYqnPbCh_RnJDaHJtdEFYRGM/view
Remember this is not my work. I post this, to help all others who got stucked like me.
Just wanna save those guys some time!
This doesn't work for me.
Hello,
I tried yours, only Radon 3.2 instead of 2.9. Camera works like a charm but not Goodix FP. What should I do?
thanks
worked perfect on my kenzoo with goodix fp

touch problem in some custom roms

hey guys.. i have touch problem.. i tried to flash two custom roms.. aryamod based 6.0.1 and aurora based on 6.0.1.. both of the roms have finger touch problem but s pen is working fine..
finger touch is fine in stock rom, phronesis absed 5.1.1 rom..
i tried the *#2663# code but the touch screen update failed..
can anybody plz reply me here ??????
If you have searched and asked your problem I rom threads then I suggest you wipe phone flash stock rom and test.
If ok then its you or your phone at fault not the roms.
Sent from my SM-N930F using XDA-Developers Legacy app
yes i flashed the stock rom its working fine..
it means digitizer is not damaged its fine too..
tried 3 custom roms but still same problem.. what can be the cause plz help me anybody ?
use roms where touch screen works is your answer.
guyz plz somebody help me.. i really wanna use 6.0.1 roms.. but the touch issue.. also tried miui.. same problem..
If you completely wipe your phone and it still doesn't work on custom ROMs, then there really isn't much help anyone can give you but try out a new phone.
Try to update every single thing. Download the latest firmware to update to the latest modem. Re-flash TWRP (2.8.7) using the newest method you can find. Root using the newest method as well and THEN give it another try.
That is the best recommendation any one can give at this point.
if you are talking about pen and finger air view, then on custom rom the latter isn't working.

Fingerprint suddenly disappeared

hello friends,
I am using custom rom in which my fingerprint working fine for some days but suddenly some day it disappeared .Unable to found fingerprint option anywhere in my zuk z1 device.I tried clearing credentials and unmarking android device manager etc and tried flashing with another customer roms still no solution at all. I am using lineage os 7.1.2 custom rom currently .if anyone have solution please help me in this.
thank you .
srk2521 said:
hello friends,
I am using custom rom in which my fingerprint working fine for some days but suddenly some day it disappeared .Unable to found fingerprint option anywhere in my zuk z1 device.I tried clearing credentials and unmarking android device manager etc and tried flashing with another customer roms still no solution at all. I am using lineage os 7.1.2 custom rom currently .if anyone have solution please help me in this.
thank you .
Click to expand...
Click to collapse
One possible solution is to flash zui 2.5. If that won't work a hardware fault can be the nearest problem as your problem is known and leads to that.
thanks strongst sir,I tried flashing zui and i am getting add fingerprint option but while doing fingerprint clicks for setting fingerprint lock my sensor not detecting my finger clicks.So i think it might be hardware problem .
srk2521 said:
thanks strongst sir,I tried flashing zui and i am getting add fingerprint option but while doing fingerprint clicks for setting fingerprint lock my sensor not detecting my finger clicks.So i think it might be hardware problem .
Click to expand...
Click to collapse
As I mentioned, the faulty fp hardware a widely known problem of the zuk z1

Categories

Resources