Related
hello all.
im using a G2 D800 AT&T, and since i have a tethering problem which i was assured would be fixed if i installed a new ROM.
so i went ahead with a guide for cloudyg3 rom, rooted using towelroot and verified with root checker, all is well.
installed TWRP with freegee- the TWRP version was 2.6.3.3 and i was told i needed to upgrade it to at least 2.7.1.. thats where problems started.
i couldnt for the life of me upgrade it to any version, 2.7.1 or higher, and TWRP showed a loki.sh problem. thought maybe unrooting and starting the process all over would fix it so i deleted all my apps, then unrooted with supersu.
tried to root with towelroot and no go. immediately after trying to root, root chekcer gave me a "device is not rooted" answer (before there was no problem), and the device reboots just after im trying to remove towelroot from the task manager (center button).
did i mess up my phone so it cant root? is there a way to check that\ other root methods?
please help
Try other methods like ioroot and if still not working flash a new kdz via download mode and reroot with some method. And btw you can easily update twrp by flashing just a zip but don't forget to restart the recovery after flashing and restore defaults under setting. And next time try autorec
Sent from my GT-N8010 using XDA Free mobile app
Use autorec
_____________________________________Read more write less and be smart
Krenol said:
Try other methods like ioroot and if still not working flash a new kdz via download mode and reroot with some method. And btw you can easily update twrp by flashing just a zip but don't forget to restart the recovery after flashing and restore defaults under setting. And next time try autorec
Sent from my GT-N8010 using XDA Free mobile app
Click to expand...
Click to collapse
How Do i go about installing ioroot? Didnt see a apk file or nothing
Ioroot works via computer
Sent from my GT-N8010 using XDA Free mobile app
first, thanks for your help.
second, i got the device rooted and all, installed TWRP through freegee and downloaded newer version (2.7.1),
and when i booted the device into TWRP mode and tried updating to 2.7.1. , THE SAME THING HAPPEND AS BEFORE-
i just cant update the twrp to more than 2.6.3.3., no matter what version i try (2.7.1 or higher).
getting error message of: assert failed: run_program (temp\loki.sh)
error executing updater binary in zip \sdcard
error flasing zip \sdcard\download\...
updating partition details.
and getting two options: wipe chache\ dalvik, and reboot system.
this happend to me with EVERY TWRP UPDATE I TRY...
and from my understanding i must update twrp to more than 2.6.3.3 before trying to flash new roms.
thats the problem i had before as well, device simply wouldnt update to more than 2.6.3.3
thanks...
I rooted with towelroot then used AutoRec (link) to install TWRP on mine then updated to 2.8.3.1 from blastagator (link) via the older TWRP I installed.
WTF...PROBLEM
i installed autorec, clicked okay and got into the twrp boot recovery mode again, and tried to instal new version with same failed result (pictures added).
but then, i clicked on reboot, device rebooted, BUT DIDNT BOOT BACK TO NORMAL SCREEN.
now the screen is black with a green\blue led that keeps flashing and wont stop.
computer recognizes the device when connected with a USB.
WTF?
shaul123 said:
WTF...PROBLEM
i installed autorec, clicked okay and got into the twrp boot recovery mode again, and tried to instal new version with same failed result (pictures added).
but then, i clicked on reboot, device rebooted, BUT DIDNT BOOT BACK TO NORMAL SCREEN.
now the screen is black with a green\blue led that keeps flashing and wont stop.
computer recognizes the device when connected with a USB.
WTF?
Click to expand...
Click to collapse
Try push a recovery img via adb
Krenol said:
Try push a recovery img via adb
Click to expand...
Click to collapse
can you try to expand a little bit? im new at this
okay so it doesnt even recognize the phone as MTP....
what happend?
the led doesnt stop flashing green tho
shaul123 said:
can you try to expand a little bit? im new at this
okay so it doesnt even recognize the phone as MTP....
what happend?
the led doesnt stop flashing green tho
Click to expand...
Click to collapse
can you enter download mode?
Krenol said:
can you enter download mode?
Click to expand...
Click to collapse
cant do ANYTHING.
screen is black and the led is flashing green and blue nonstop.
tried turning it on or pressing the volume down+power button but nothing (i added a picture). computer wont recognize the phone either.
when i try to call the phone is off
please help
the phone seemed to be in twrp 2.7.0 although it showed me a failed result
I'm not very sure but maybe its was something from the freegee app... you should't have any loki error
So your screen its COMPLETELY black?.. even you hold the power button or something it didnt show anything on screen?...at least if you hold the power button the led stops to flash?
UPDATE
so after i did hard factory reset i am in boot recovery mode, with a twrp version of 2.7.0.0
still cant get past the LG logo (LED keeps flashing) but at least i can be in recovery mode.
computer recognizes that the phone is connected with USB but cant get it to appear as MTP
thanks
i read up and i THINK im in a boot loop.
maybe i was really stupid- are you suppose to use autorec only on kitkat devices and nothing else? my device is 4.2.2.
Yea, I'm on the same boat. I was on 10b (4.2.2) tried using freegee. Freegee said it didn't support my device went to auto rec. Auto rec managed to flash trwp made the backup then was told to reboot the phone. Then I got the same black screen with the blue green led. I plugged in he phone to the computer and pressed volume up and the power button and I got the hard reset option. I confirmed the hard and now I have rebooted into twrp.
Word of the wise: once in trwp don't restore your backup. It doesn't work. See other thread on this.
Sent from my VS980 4G using Tapatalk
Hello,
I have the T-Mobile variant of the S5 and I am trying to install a custom recovery and it doesn't send it over to my phone. I tried to push over both TWRP and Philz Touch and Odin3 said they both succeed in installing. However, when I go into recovery, it shows the stock recovery still. At the top it says "Android system recovery <3e> LRX1T.G900TUVU1DOB1". I have been looking it up for a while now and I can't seem to figure it out. I do have Android version 5.0 stocked and not rooted on my phone.
How I tried to do it in Odin:
I made sure that only Auto Reboot and F. Reset Time were selected.
Then I checked off PDA and navigated to both the philz_touch_6.57.8-klte.tar.md5 and flashed it. After I rebooted my phone I went to check the recovery and it was still stock. It was the same exact way with the openrecovery-twrp-2.8.5.0-gt-klte.tar file I flashed.
Any help would be appreciated.
Thank you,
Brandon
I have same problem on dual sim variant.
Sent from my SM-G900FD using XDA Free mobile app
Hmmmmmm, well good to know it isn't just my phone. I also forgot to mention I am running Windows 7 Ultimate 64Bit edition with the latest Samsung drivers.
Happened here too, ended up having to root with "CF Auto Root", then install TWRP recovery with "TWRP Manager" from Google Play (Free)
It's because of the auto reboot. That needs to be unchecked, after the flash is done, pull the battery and reboot into recovery using the buttons.
metalfan78 said:
It's because of the auto reboot. That needs to be unchecked, after the flash is done, pull the battery and reboot into recovery using the buttons.
Click to expand...
Click to collapse
This worked perfectly. Thank you!
Edit: Right afterwards when I tried to go back into it, the recovery was back to stock.
That's strange, it should have stayed custom
metalfan78 said:
That's strange, it should have stayed custom
Click to expand...
Click to collapse
I had to do your steps about 3 more times until it actually stuck. Now I have a custom recovery installed. Thank you again!
Glad it worked!
Hi all,
I just finished testing the new method of rooting using new SuperSU system-less and it's working well on my P600. I don't have other device to test it on, but if you guys could test it out on your device and report back, that would be nice.
Here how to root using new SuperSU system-less app:
Prep:
1) Download Odin 3.09 http://odindownload.com/Samsung-Odin/#.Vm3AglE1I-Q
2) Download SuperSu version 2.6.2 to your SDcard here http://forum.xda-developers.com/showpost.php?p=64161125&postcount=3
3) Download TWRP 2.8.7.0 tar file to your PC here https://dl.twrp.me/lt03wifiue/ (you must use Spen to navigate, touch won't work)
For P605 - Please use twrp-2.8.7.0-lt03ltexx-4.4.img.tar version here https://dl.twrp.me/lt03ltexx/
4) Download the full stock 5.1.1 firmware by download this tool to your PC from here http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
Then use the tool to download 5.1.1 rom (very fast download). set model=sm-p600, region=XAR, put a check in "Auto" and "Decrypte automatically"
Execcution:
1) Use Odin to flash full factory rom 5.1.1 to your device with "Auto Reboot" checked. If you already using 5.1.1 with root, you can just flash over your current one. Your data will be preserved. It's not nessessary to flash the full firmware but it's easier and less confuse. Once completed your device will reboot. Now boot back to download mode.
2) Use Odin to flash TWRP 2.8.7.0 with "Auto Reboot" UNchecked. Once completed. Hold Vol up+Home+power buttons to boot to TWRP recovery(do not let your device boot up). It will take a while so just wait. You also will see a red message warning about SEdroid security..blah blah...just ignore it. If you want TWRP touch, you can flash this version zip (can't flash through ODIN) before proceed. https://s.basketbuild.com/devs/Joshndroid/TWRP/lt03wifi
3) Once in TWRP, flash the SuperSU 2.6.1 system-less. Becareful here, after hit REBOOT, If TWRP offered to root, DO NOT DO IT (You will bootloop if you miss this step). Hit on "do not install". Your device will reboot. Done!! This SuperSU will patch your kernel and install root. Once completed boot up and enjoy. Your system is now rooted with TWRP installed. Pretty nice!!
EDIT: You also need to disable "Security change" pop up by remove or use Titanium to disable "Security policy updates" and "SecurityLogAgent". I heard report that if you don't your device may bootloop later on.
@joshndroid made his own version of twrp 2.8.7 which has full touch support/recognition (not just the s-pen). Here is the link:
https://s.basketbuild.com/devs/Joshndroid/TWRP/lt03wifi Maybe could you put this version in the OP as another option instead of the official twrp?
Guys, a question. Can i use the exynos version of TWRP, ie- lt03wifiue, on my SM-P601, which is also the exynos one, but with 3G support.?
Thanks.
mosimchah said:
@joshndroid made his own version of twrp 2.8.7 which has full touch support/recognition (not just the s-pen). Here is the link:
https://s.basketbuild.com/devs/Joshndroid/TWRP/lt03wifi Maybe could you put this version in the OP as another option instead of the official twrp?
Click to expand...
Click to collapse
I don't think he made one for Odin.
Sent from my SM-P600 using Tapatalk
amey2606 said:
Guys, a question. Can i use the exynos version of TWRP, ie- lt03wifiue, on my SM-P601, which is also the exynos one, but with 3G support.?
Thanks.
Click to expand...
Click to collapse
Yes
Sent from my SM-P600 using Tapatalk
buhohitr said:
I don't think he made one for Odin.
Sent from my SM-P600 using Tapatalk
Click to expand...
Click to collapse
Good point, I didn't notice that, however we could flash the official twrp with odin, and then we could flash joshndroid's twrp from the official twrp. So could you add that to the op?
mosimchah said:
Good point, I didn't notice that, however we could flash the official twrp with odin, and then we could flash joshndroid's twrp from the official twrp. So could you add that to the op?
Click to expand...
Click to collapse
Added to OP. Thanks
Ok
Root is present (supersu) seem to work but, don't work with some apps
murigny64 said:
Ok
Root is present (supersu) seem to work but, don't work with some apps
Click to expand...
Click to collapse
Give me a few so I can test them out
murigny64 said:
Ok
Root is present (supersu) seem to work but, don't work with some apps
Click to expand...
Click to collapse
Did you install supersu from the playstore and did it ask to update binaries? I can't remember when I did mine if it asked or not. I don't have any su issues with mine.
Flash firm doj3 with odin
Reboot in bootloader
Flash twrp with odin
Reboot in twrp
Flash supersu 2.61
Reboot.
Kernel seem to be patched (red warning message), Supersu app is present with no binarie update needed.
Reboot in twrp and Flash xposed wanam mod
Result:
Titanium Backup: ok
Rebooter app: nok
Freeze after 2 mins: have to hard reboot, again and again.
So, I flash again with odin and use the old method (boot patched)
how do i uninstall twrp?
tahrang said:
how do i uninstall twrp?
Click to expand...
Click to collapse
Flash a different recovery, either with twrp or odin. Why do you want to remove twrp?
Done and completed
twrp not working correctly, it did previously, but after the update, it doesn't.
---------- Post added at 09:40 PM ---------- Previous post was at 09:15 PM ----------
buhohitr said:
Hi all,
I just finished testing the new method of rooting using new SuperSU system-less and it's working well on my P600. I don't have other device to test it on, but if you guys could test it out on your device and report back, that would be nice.
Here how to root using new SuperSU system-less app:
Prep:
1) Download SuperSu version 2.6.1 to your SDcard here http://forum.xda-developers.com/showpost.php?p=64161125&postcount=3
2) Download TWRP 2.8.7.0 tar file to your PC here https://dl.twrp.me/lt03wifiue/ (you must use Spen to navigate, touch won't work)
3) Download the full stock 5.1.1 firmware by download this tool to your PC from here http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
Then use the tool to download 5.1.1 rom (very fast download). set model=sm-p600, region=XAR, put a check in "Auto" and "Decrypte automatically"
Execcution:
1) Use Odin to flash full factory rom 5.1.1 to your device with "Auto Reboot" checked. If you already using 5.1.1 with root, you can just flash over your current one. Your data will be preserved. It's not nessessary to flash the full firmware but it's easier and less confuse. Once completed your device will reboot. Now boot back to download mode.
2) Use Odin to flash TWRP 2.8.7.0. Once completed. Hold Vol up+Home+power buttons to boot to TWRP recovery(do not let your device boot up). It will take a while so just wait. You also will see a red message warning about SEdroid security..blah blah...just ignore it. If you want TWRP touch, you can flash this version zip (can't flash through ODIN) before proceed. https://s.basketbuild.com/devs/Joshndroid/TWRP/lt03wifi
3) Once in TWRP, flash the SuperSU 2.6.1 system-less. Becareful here, If TWRP offered to root, DO NOT DO IT. This SuperSU will patch your kernel and install root. Once completed boot up and enjoy. Your system is now rooted with TWRP installed. Pretty nice!!
Click to expand...
Click to collapse
HELP!
yes I'm screaming, sorry.
I followed these instructions, and now my note is stuck in loop - starts with samsung galaxy note 10.1 2014 logo, goes to samsung logo and restarts.
Please, please help
thanks
Now it is stuck on samsung logo, and doesnot go any further.
Ok, now I'm starting the whole thing again. hopefully, this will go better
third time is the charm! succeeded.
What do i do when i already have the spanish firmware? Do i need to flash it again with the 5.1.1 code XAR? Or can i flash TWRP with Odin now.?
vuurvlinder said:
What do i do when i already have the spanish firmware? Do i need to flash it again with the 5.1.1 code XAR? Or can i flash TWRP with Odin now.?
Click to expand...
Click to collapse
I flashed the xar update, even though i already had the spanish one, plus i was rooted. then i flashed twrp and supersu like in the post above.
thanks
---------- Post added at 05:42 PM ---------- Previous post was at 05:40 PM ----------
murigny64 said:
Flash firm doj3 with odin
Reboot in bootloader
Flash twrp with odin
Reboot in twrp
Flash supersu 2.61
Reboot.
Kernel seem to be patched (red warning message), Supersu app is present with no binarie update needed.
Reboot in twrp and Flash xposed wanam mod
Result:
Titanium Backup: ok
Rebooter app: nok
Freeze after 2 mins: have to hard reboot, again and again.
So, I flash again with odin and use the old method (boot patched)
Click to expand...
Click to collapse
did you get the wanam again after the old method? if so, please tell me how.
thanks
Hmm - I've Odin'd the new XAR v.5.1.1 just fine, but when I try to Odin TWRP 2.8.7/6/3, they all fail in Odin 3.09. I've tried multiple times with same result. Any suggestions?
Michael in ATL said:
Hmm - I've Odin'd the new XAR v.5.1.1 just fine, but when I try to Odin TWRP 2.8.7/6/3, they all fail in Odin 3.09. I've tried multiple times with same result. Any suggestions?
Click to expand...
Click to collapse
Did you boot up after Odin XAR 5.1.1? boot up then boot down to Odin download mode and try again.
Not able to Odin TWRP
buhohitr said:
Did you boot up after Odin XAR 5.1.1? boot up then boot down to Odin download mode and try again.
Click to expand...
Click to collapse
I sure did, and should've been clearer. I'm running 5.1.1 XAR that I Odin'd yesterday. USB debugging is enabled, and Odin tries/fails when trying to load up to 4 versions of TWRP that I've tried. Further, I get corrupted firmware after it tries, and have to reinstall v5.1.1 (if that tells those much smarter than I anything)
Michael in ATL said:
I sure did, and should've been clearer. I'm running 5.1.1 XAR that I Odin'd yesterday. USB debugging is enabled, and Odin tries/fails when trying to load up to 4 versions of TWRP that I've tried. Further, I get corrupted firmware after it tries, and have to reinstall v5.1.1 (if that tells those much smarter than I anything)
Click to expand...
Click to collapse
Can you try to boot int recovery to see if you can access stock recovery? Possible you need to do format storage?
[RECOVERY][ROOT] N910T/T3 6.0.1 PE3 - How to Root (Systemless & System Mode) / TWRP
This is really simple but I'm guessing people are still wondering.
Download TWRP
Download SuperSU 2.76 Systemless (for Stock Kernels) or Download SuperSU 2.76 SystemMode (Permissive Kernel Required)
*Optional* Download a Permissive Kernel like BeastMode (only needed for System Mode SuperSu)
Download Odin
Put the SuperSU on your SD Card / Internal Storage
*Optional* Put Custom Kernel on SD Card (Optional, Only required if using SuperSu SystemMode)
Reboot into Download Mode
Flash TWRP in Odin
Boot into TWRP
Flash SuperSU
Enjoy!
For details on how to flash with Odin, flash with TWRP please see other threads or use Google.
Additional Downloads:
-N910T PE3 Stock Recovery
Additional Info:
NetFlix:
Some users have reported that NetFlix would not connect after rooting. There is no need to do this if you do not have any problems with NetFlix.
-Delete /system/vendor/lib/liboemcrypto.so and reboot.
------------------------------------------------------
Thanks of course to Chainfire & Teamwin
Also Thanks to freeza.
Cool. Thanks. it's same for all other mm roms too.
Is this Systemless root?
So if we already have a rooted device with TWRP installed, and assuming we already were able to flash 6.0.1 to the device, then the only step required is:
Download SuperSU
Flash SuperSU via TWRP
Is that right?
Sent from my SM-N910T3 using XDA-Developers mobile app
f4phantomii said:
So if we already have a rooted device with TWRP installed, and assuming we already were able to flash 6.0.1 to the device, then the only step required is:
Download SuperSU
Flash SuperSU via TWRP
Is that right?
Sent from my SM-N910T3 using XDA-Developers mobile app
Click to expand...
Click to collapse
Your prior rooted device needs to be rerooted. Download SuperSu to phone. Download TWRP to computer. Odin TWRP. Once TWRP is flashed, boot to TWRP and install Supersu [at least that's what I did.]
But since I already have TWRP installed as recovery, do I need to re-install it via Odin?
Unless flashing 6.0.1 overwrites the recovery?
Otherwise just flashing SuperSU should re-root.
Sent from my SM-N910T3 using XDA-Developers mobile app
f4phantomii said:
But since I already have TWRP installed as recovery, do I need to re-install it via Odin?
Unless flashing 6.0.1 overwrites the recovery?
Otherwise just flashing SuperSU should re-root.
Click to expand...
Click to collapse
Odin flashing MM will overwrite your recovery.
Got it. Thanks fo clarifying that.
Sent from my SM-N910T3 using XDA-Developers mobile app
Question, have rooted and jail broke many but not this 910T yet. I am on non-root 5.1.1, should I take the OTA 6.0.1 and then follow the above instructions or download 6.0.1 from samsung and install via Odin and then start following these instructions? Would perfer to take over the air so I dont have to reset up everything.
Thanks in advance and I cant fn wait to start using Adfree again!
I downloaded via Kies. Didn't have to setup a thing after.
Sent from my SM-N910T using XDA-Developers mobile app
I'm impressed we got this being 1.90 generations old. I usually feel forgotten and abandoned by now. Thanks T-Mo. Now please don't F us on the Note 6/7 bootloader!
Bubba Fett said:
I'm impressed we got this being 1.90 generations old. I usually feel forgotten and abandoned by now. Thanks T-Mo. Now please don't F us on the Note 6/7 bootloader!
Click to expand...
Click to collapse
Agreed.
Anybody know if editing the platform.xml still works for SD card writing? And with the update I am getting the stupid -504 error in google play store trying to install Titanium backup......I might have to reflash ugh.
Edit*****
I fixed my issue
Bubba Fett said:
I'm impressed we got this being 1.90 generations old. I usually feel forgotten and abandoned by now. Thanks T-Mo. Now please don't F us on the Note 6/7 bootloader!
Click to expand...
Click to collapse
They will.
Man I hope not. We did a lot of *****in! Looks like HTC is gonna do the next nexus and should be on par with the N7 but I really don't want to do that. There is no way any phone can compare with the same phone rooted and custom. We will see.
Any ideas, stock non rooted 5.1 updated via OTA to 6.0.1, flashed latest TWRP 3.2.0 successfully (USB Deb enabled, R/L disabled) and still boots into stock recovery? What am I doing wrong?
SM-N910T
---------- Post added at 02:39 AM ---------- Previous post was at 01:41 AM ----------
Found a work around from another post:
'm trying to install TWRP, but it keeps getting overwritten. After installing, I can initially boot into TWRP, but after doing a system reboot, it goes back to stock recovery. What am I doing wrong?
Here's the steps I take:
Open Odin, check AP and load twrp image (3.0.0)
Connect phone and wait for Added!
Uncheck Auto Reboot
Click Start and wait to finish.
I then have to take out the battery to turn the phone off (I had to do it this way because leaving Auto Reboot checked would cause the same issue as below). I then boot directly into recovery and TWRP loads as expected. Everything looks fine, and I can do a recovery reboot back to TWRP. However, if I do a system reboot and let Android load, then shutdown and boot into recovery again, I'm back to stock.
Sprint SM-N910P
Android 5.1.1
http://androidforums.com/threads/twrp-keeps-getting-overwritten.1003988/
richard75013 said:
Any ideas, stock non rooted 5.1 updated via OTA to 6.0.1, flashed latest TWRP 3.2.0 successfully (USB Deb enabled, R/L disabled) and still boots into stock recovery? What am I doing wrong?
SM-N910T
---------- Post added at 02:39 AM ---------- Previous post was at 01:41 AM ----------
Found a work around from another post:
'm trying to install TWRP, but it keeps getting overwritten. After installing, I can initially boot into TWRP, but after doing a system reboot, it goes back to stock recovery. What am I doing wrong?
Here's the steps I take:
Open Odin, check AP and load twrp image (3.0.0)
Connect phone and wait for Added!
Uncheck Auto Reboot
Click Start and wait to finish.
I then have to take out the battery to turn the phone off (I had to do it this way because leaving Auto Reboot checked would cause the same issue as below). I then boot directly into recovery and TWRP loads as expected. Everything looks fine, and I can do a recovery reboot back to TWRP. However, if I do a system reboot and let Android load, then shutdown and boot into recovery again, I'm back to stock.
Sprint SM-N910P
Android 5.1.1
http://androidforums.com/threads/twrp-keeps-getting-overwritten.1003988/
Click to expand...
Click to collapse
I'm having the same issue however I can't get into TWRP period... I pushed MM and TWRP 3.0.2 from ODIN 3.07. During reboot it rw's the MM recovery
Has anyone flashed the new 6.0 MM BL and CP vs Flashfire?
The G.O.A.T. said:
I'm having the same issue however I can't get into TWRP period... I pushed MM and TWRP 3.0.2 from ODIN 3.07. During reboot it rw's the MM recovery
Click to expand...
Click to collapse
richard75013 said:
Any ideas, stock non rooted 5.1 updated via OTA to 6.0.1, flashed latest TWRP 3.2.0 successfully (USB Deb enabled, R/L disabled) and still boots into stock recovery? What am I doing wrong?
SM-N910T
---------- Post added at 02:39 AM ---------- Previous post was at 01:41 AM ----------
Found a work around from another post:
'm trying to install TWRP, but it keeps getting overwritten. After installing, I can initially boot into TWRP, but after doing a system reboot, it goes back to stock recovery. What am I doing wrong?
Here's the steps I take:
Open Odin, check AP and load twrp image (3.0.0)
Connect phone and wait for Added!
Uncheck Auto Reboot
Click Start and wait to finish.
I then have to take out the battery to turn the phone off (I had to do it this way because leaving Auto Reboot checked would cause the same issue as below). I then boot directly into recovery and TWRP loads as expected. Everything looks fine, and I can do a recovery reboot back to TWRP. However, if I do a system reboot and let Android load, then shutdown and boot into recovery again, I'm back to stock.
Sprint SM-N910P
Android 5.1.1
http://androidforums.com/threads/twrp-keeps-getting-overwritten.1003988/
Click to expand...
Click to collapse
Perhaps try wiping everything...
System, Data, Internal Storage.
Then flash the Odin MM tar.
Then start the process in the thread.
I personally did the process after a SmartSwitch update and it worked from just doing what I listed in the OP.
DeeXii said:
Perhaps try wiping everything...
System, Data, Internal Storage.
Then flash the Odin MM tar.
Then start the process in the thread.
I personally did the process after a SmartSwitch update and it worked from just doing what I listed in the OP.
Click to expand...
Click to collapse
Yeah idk... It just worked this time. IF I was to say what I did different I booted into recovery first it started with applying update or something then crashed because no update was there, then showed stock MM recovery I then. Shutdown and went into download mode and did the OP.
It work!!!
Doing a new backup now
Hello everyone
I have twrp installed on my phone with custom rom, the device is working fine (i can access OS) but i wanted to change my rom so i go to fastboot and tried to boot to recovery but when i press the power button instead of twrp showing up, Google logo shows up and get stuck on it
What i have tried: i gave it around 10 minutes, didn't work
I tried flashing it again (same twrp version)
Tried flashing using twrp app
I tried flashing an older version
Excuse my English and any help well be appreciated
Sent from my Nexus 6P using Tapatalk
Up
Sent from my Nexus 6P using Tapatalk
After flashing TWRP you must flash magisk or TWRP wont stick..so flash TWRP via fastboot, dont reboot, go to recovery and flash magisk..it should be fine
ahmed_k1996 said:
Up
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Double check make sure your on the latest TWRP. After flashing I use the volume keys in bootloader mode to switch to recovery. Then power button to confirm the action . Like mentioned above flash magisk 16 to make recovery stick.
scrin378 said:
After flashing TWRP you must flash magisk or TWRP wont stick..so flash TWRP via fastboot, dont reboot, go to recovery and flash magisk..it should be fine
Click to expand...
Click to collapse
Exodusche said:
Double check make sure your on the latest TWRP. After flashing I use the volume keys in bootloader mode to switch to recovery. Then power button to confirm the action . Like mentioned above flash magisk 16 to make recovery stick.
Click to expand...
Click to collapse
Thanks guys, it worked
Sent from my Nexus 6P using Tapatalk