"please don't delete this thread
i really need help"
hi,
I flashed 5.1.1 stock rom on my SM-910H after rooting the phone with CF-Auto-Root-tre3g-tre3gxx-smn910h.zip - based on KTU84P.N910HXXU1ANJ4 4.4.4 this problem happened to my phone
"RECOVERY IS NOT SEANDROID ENFORCING" + endless loop
i went to recovery at the bottom of screen says : "dm-verity verification failed"
i fully wiped the phone through recovery and reboot but again it says "RECOVERY IS NOT SEANDROID ENFORCING" and goes to samsung logo then suddenly restart and repeats again and again
i'm using Odin3 v3.10.7
i tried to flash 5.1.1 N910HXXU1BOF1_N910HOLB1BOF1_N910HXXU1BOC5_HOME.tar official single rom file but in odin it says :
Code:
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin engine v(ID:3.1100)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i searched for a pit file and found this four files:
SM-N910H_pit_mannyvinny
TRE3G_EUR_OPEN_HIDDEN50M
TRE3G_EUR_OPEN_MEA
TRE3G_EUR_OPEN_MEA
when i flash SM-N910H_pit alone odin log says :
Code:
<ID:0/008> Odin engine v(ID:3.1100)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
when i flash TRE3G_EUR_OPEN_HIDDEN50M alone it says
Code:
<ID:0/008> Odin engine v(ID:3.1100)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Removed!!
<ID:0/008> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
but nothing changed.
i searched for 4file rom and downloaded the :
N910HXXU1ANIF_OXE1ANIF_Repair_Firmware :
AP_N910HXXU1ANIF_CL2815469_QB2396298_REV00_user_low_ship.tar
BL_N910HXXU1ANIF_CL2815469_QB2396298_REV00_user_low_ship.tar
CP_N910HXXU1ANIF_1727235.tar
CSC_OXE_N910HOXE1ANIF_CL2815469_QB2398142_REV00_user_low_ship.tar
TRE3G_EUR_OPEN_HIDDEN50M.pit
odin log for this rom :
Code:
<ID:0/008> Removed!!
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin engine v(ID:3.1100)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i rooted the phone with "twrp-2.8.7.0-tre3gxx.img" by odin and changed the file system of "system" and "data" and "cache" to ext2 then changed it back to ext4 then repair each one -one of my friend said it would help- but nothing changed...
at this point my phone stuck In Samsung Logo , and its not going to next booting logo of samsung like before... and boot-loop not happen like before just frozen at that black and white logo....
but "RECOVERY IS NOT SEANDROID ENFORCING" message appear every time i try to go to recovery
so when i ask about my problem on xda a user recommend me to flash a custom kernel
i found the Talexop Kernel
i installed talexop_Kernel_N910C_5.1.1_C0J5_v1.05_aggresive but this it says "Kernel is not SEAandroid Enforcing" and when i try to go to recovery like before it says "Recovery is not SEAandroid Enforcing" and recovery automaticly restart after a few second . i flashed twrp-2.8.7.0-tre3gxx.img with odin again hpe to fix the recovery but nothing changed still recovery reset after a few seconds.
please help me
is there any hope?
does my phone hard bricked?
if there is a solution please explain simply
please help
PersiAndroid said:
"please don't delete this thread
i really need help"
hi,
I flashed 5.1.1 stock rom on my SM-910H after rooting the phone with CF-Auto-Root-tre3g-tre3gxx-smn910h.zip - based on KTU84P.N910HXXU1ANJ4 4.4.4 this problem happened to my phone
"RECOVERY IS NOT SEANDROID ENFORCING" + endless loop
i went to recovery at the bottom of screen says : "dm-verity verification failed"
i fully wiped the phone through recovery and reboot but again it says "RECOVERY IS NOT SEANDROID ENFORCING" and goes to samsung logo then suddenly restart and repeats again and again
i'm using Odin3 v3.10.7
i tried to flash 5.1.1 N910HXXU1BOF1_N910HOLB1BOF1_N910HXXU1BOC5_HOME.tar official single rom file but in odin it says :
Code:
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin engine v(ID:3.1100)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i searched for a pit file and found this four files:
SM-N910H_pit_mannyvinny
TRE3G_EUR_OPEN_HIDDEN50M
TRE3G_EUR_OPEN_MEA
TRE3G_EUR_OPEN_MEA
when i flash SM-N910H_pit alone odin log says :
Code:
<ID:0/008> Odin engine v(ID:3.1100)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
when i flash TRE3G_EUR_OPEN_HIDDEN50M alone it says
Code:
<ID:0/008> Odin engine v(ID:3.1100)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Removed!!
<ID:0/008> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
but nothing changed.
i searched for 4file rom and downloaded the :
N910HXXU1ANIF_OXE1ANIF_Repair_Firmware :
AP_N910HXXU1ANIF_CL2815469_QB2396298_REV00_user_low_ship.tar
BL_N910HXXU1ANIF_CL2815469_QB2396298_REV00_user_low_ship.tar
CP_N910HXXU1ANIF_1727235.tar
CSC_OXE_N910HOXE1ANIF_CL2815469_QB2398142_REV00_user_low_ship.tar
TRE3G_EUR_OPEN_HIDDEN50M.pit
odin log for this rom :
Code:
<ID:0/008> Removed!!
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin engine v(ID:3.1100)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i rooted the phone with "twrp-2.8.7.0-tre3gxx.img" by odin and changed the file system of "system" and "data" and "cache" to ext2 then changed it back to ext4 then repair each one -one of my friend said it would help- but nothing changed...
at this point my phone stuck In Samsung Logo , and its not going to next booting logo of samsung like before... and boot-loop not happen like before just frozen at that black and white logo....
but "RECOVERY IS NOT SEANDROID ENFORCING" message appear every time i try to go to recovery
so when i ask about my problem on xda a user recommend me to flash a custom kernel
i found the Talexop Kernel
i installed talexop_Kernel_N910C_5.1.1_C0J5_v1.05_aggresive but this it says "Kernel is not SEAandroid Enforcing" and when i try to go to recovery like before it says "Recovery is not SEAandroid Enforcing" and recovery automaticly restart after a few second . i flashed twrp-2.8.7.0-tre3gxx.img with odin again hpe to fix the recovery but nothing changed still recovery reset after a few seconds.
please help me
is there any hope?
does my phone hard bricked?
if there is a solution please explain simply
Click to expand...
Click to collapse
Okay first of all calm down your phone is not bricked or anything. "Kernel is not SEAandroid Enforcing" OR "Recovery is not SEAandroid enforcing" are common errors which happen when you flash custom recovery or root the phone. if you go to sammobile and download latest 5.1.1 COJ5 build and flash it it may solve your problem but the problem with "COJ5" build is that its bootloader is locked Once you have updated to 5.1.1 COJ5 you can't downgrade to 5.0.2 OR kitkat and there is no root for it yet. But since you have already tried your luck with PIT files i'd suggest first you flash twrp then format your phone, then download stock ANJ4 KITKAT from sammobile and try to flash it in odin....see if it works...if works then all good and if it doesn't work then download and flash "5.1.1 COJ5" build from sammobile. It will lock your bootloader but it may help in getting your phone back online !!!!
*as i always say i am not responsible if you damage your phone this is just my opinion on what i would have done if i were you....you can try this or wait for more expert opinion"
dork997 said:
Okay first of all calm down your phone is not bricked or anything. "Kernel is not SEAandroid Enforcing" OR "Recovery is not SEAandroid enforcing" are common errors which happen when you flash custom recovery or root the phone. if you go to sammobile and download latest 5.1.1 COJ5 build and flash it it may solve your problem but the problem with "COJ5" build is that its bootloader is locked Once you have updated to 5.1.1 COJ5 you can't downgrade to 5.0.2 OR kitkat and there is no root for it yet. But since you have already tried your luck with PIT files i'd suggest first you flash twrp then format your phone, then download stock ANJ4 KITKAT from sammobile and try to flash it in odin....see if it works...if works then all good and if it doesn't work then download and flash "5.1.1 COJ5" build from sammobile. It will lock your bootloader but it may help in getting your phone back online !!!!
*as i always say i am not responsible if you damage your phone this is just my opinion on what i would have done if i were you....you can try this or wait for more expert opinion"
Click to expand...
Click to collapse
there is no 5.1.1 " COJ5 " Build for SM-N910H , but there is for SM-N910C , and no ANJ4 KITKAT for both
I searched for latest firmware for SM-N910H and its 5.1.1 "COK1" , DOES IT DO THE JOB? like i said i flashed "5.1.1 N910HXXU1BOF1_N910HOLB1BOF1_N910HXXU1BOC5" and "4.4 kitkat N910HXXU1ANIF" and odin failed...
i keep getting <ID:0/008> NAND Write Start!! <ID:0/008> FAIL! Errors how can i be sure i'm not facingerror whe i flash ANJ4 KITKAT or 5.1.1 "COK1"?
is installing custom roms based on 5.1.1 like RulingLite from recovery helps getting phone back alive?
PersiAndroid said:
there is no 5.1.1 " COJ5 " Build for SM-N910H , but there is for SM-N910C , and no ANJ4 KITKAT for both
I searched for latest firmware for SM-N910H and its 5.1.1 "COK1" , DOES IT DO THE JOB? like i said i flashed "5.1.1 N910HXXU1BOF1_N910HOLB1BOF1_N910HXXU1BOC5" and "4.4 kitkat N910HXXU1ANIF" and odin failed...
i keep getting <ID:0/008> NAND Write Start!! <ID:0/008> FAIL! Errors how can i be sure i'm not facingerror whe i flash ANJ4 KITKAT or 5.1.1 "COK1"?
is installing custom roms based on 5.1.1 like RulingLite from recovery helps getting phone back alive?
Click to expand...
Click to collapse
i don't know about custom roms.......But you can try with kitkat and COK1 stock firmwares.
good morning I have a problem when you want to return install the Android 5.1.1 rom N910CXXU2COJ5_N910CUUB2COJ2_N910CXXU1COJ5_HOME.tar and now I can not go back to 4.4.4 .
Odin says:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910CXXU1ANK5_N910CUUB1ANL1_N910CXXU1ANL4_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
and the cell appears a legend
SW REV. CHECK FAIL DEVICE:2, BINARY:1
I have the version COJ5
Thank you
After you install COJ5, you are stuck to it. There is no easy way to downgrade it as now.
Hi,
OK guys, I'm really stuck here so any help would be very much appreciated.
I have Galaxy S5 SM-G900F phone.
My current status is pretty much described in the title...
Trying to boot puts me in a boot loop with Warranty Bit: kernel or Warranty bit: recovery (depends if the last thing I flashed was root or recovery - both succeed with Odin)
Trying to enter recovery mode I get Warranty Bit: recovery.
When I try Odin to flash a stock ROM get this:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1BOI4_G900FOJK1BOI1_G900FXXU1BOI4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> aboot.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
At this stage I'm pretty desperate. I don't care which ROM or if I'm rooted or nor. Just need something working on my phone.
Help!!
Thanks.
basgruv said:
Hi,
OK guys, I'm really stuck here so any help would be very much appreciated.
I have Galaxy S5 SM-G900F phone.
My current status is pretty much described in the title...
Trying to boot puts me in a boot loop with Warranty Bit: kernel or Warranty bit: recovery (depends if the last thing I flashed was root or recovery - both succeed with Odin)
Trying to enter recovery mode I get Warranty Bit: recovery.
When I try Odin to flash a stock ROM get this:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1BOI4_G900FOJK1BOI1_G900FXXU1BOI4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> aboot.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
At this stage I'm pretty desperate. I don't care which ROM or if I'm rooted or nor. Just need something working on my phone.
Help!!
Thanks.
Click to expand...
Click to collapse
Thanks for using XDA Assist.Thread will be moved to Galaxy S 5 Q&A, Help & Troubleshooting.You'll get better support there
__
v7
XDA Assist
You can flash just the recovery using odin and see if it works out
basgruv said:
Hi,
OK guys, I'm really stuck here so any help would be very much appreciated.
I have Galaxy S5 SM-G900F phone.
My current status is pretty much described in the title...
Trying to boot puts me in a boot loop with Warranty Bit: kernel or Warranty bit: recovery (depends if the last thing I flashed was root or recovery - both succeed with Odin)
Trying to enter recovery mode I get Warranty Bit: recovery.
When I try Odin to flash a stock ROM get this:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1BOI4_G900FOJK1BOI1_G900FXXU1BOI4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> aboot.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
At this stage I'm pretty desperate. I don't care which ROM or if I'm rooted or nor. Just need something working on my phone.
Help!!
Thanks.
Click to expand...
Click to collapse
androidtweaker1 said:
You can flash just the recovery using odin and see if it works out
Click to expand...
Click to collapse
Tried it. didn't change a thing.
But it doesn't matter because i was wrong about the model (came in a 900F box but was actually a 9006V).
Once I tried flashing to correct ROM for my version everything was OK.
Thanks everyone...
Hey guys, I m trying to flash stock rom on my S3 Neo GT-I9301I but i dont work. here is odin code. i tried almost everything please help. it stucks always. even when i try to install a recovery it stucks at recovery.img. again here is the code
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G7102XXUBNG4_G7102ODDBNG4_G7102DDUBNF4_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)"
PLEASE HELP ME GUYS :crying::crying:
You have selected the wrong file, that is for another smartphone
Alessandro's said:
You have selected the wrong file, that is for another smartphone
Click to expand...
Click to collapse
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9301IXXUANL1_I9301IOXAUANL1_I9301IXXUANI2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
My device is normaly a GT-I9301I but i suddenly installed GT-I9300I. The only things i can do with phone right now is: entering recovery(twrp) and downlaod mod.
I want now the stock rom of GT-I9301I what can i do now?? :crying::crying:
Flash the right firmware for your phone.
Jhnsn said:
Flash the right firmware for your phone.
Click to expand...
Click to collapse
As you can see the odin code above it stucks at sbl1.mdn or am i doing something wrong?
I tried it with another Firmware
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9301IXXUAOJ1_I9301ITTRAOH2_I9301IXXUAOD2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
again Stuck
No mather what firmware i try to install everytime it stucks
HELP PLEASE
AnroidLover said:
Hey guys, I m trying to flash stock rom on my S3 Neo GT-I9301I but i dont work. here is odin code. i tried almost everything please help. it stucks always. even when i try to install a recovery it stucks at recovery.img. again here is the code
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G7102XXUBNG4_G7102ODDBNG4_G7102DDUBNF4_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)"
PLEASE HELP ME GUYS :crying::crying:
Click to expand...
Click to collapse
or try another version of odin
Alessandro's said:
or try another version of odin
Click to expand...
Click to collapse
already tried. but where should i put the firmware? PDA, CSC, PHONE, AP? i tried already AP and PDA and almost every version of odin
http://www.sammobile.com/firmwares/download/64471/I9301IXCUAOL3_I9301IITVAOL1_ITV/
this is one of the latest firmware avaiable on sammobile for gt-i9301i
http://forum.xda-developers.com/attachment.php?attachmentid=1140630
this is odin
Alessandro's said:
http://www.sammobile.com/firmwares/download/64471/I9301IXCUAOL3_I9301IITVAOL1_ITV/
this is one of the latest firmware avaiable on sammobile for gt-i9301i
http://forum.xda-developers.com/attachment.php?attachmentid=1140630
this is odin
Click to expand...
Click to collapse
Thank u A lot, i m gonna try it.
AnroidLover said:
already tried. but where should i put the firmware? PDA, CSC, PHONE, AP? i tried already AP and PDA and almost every version of odin
Click to expand...
Click to collapse
in the newer version of odin AP is the same of PDA
of the older version
Alessandro's said:
http://www.sammobile.com/firmwares/download/64471/I9301IXCUAOL3_I9301IITVAOL1_ITV/
this is one of the latest firmware avaiable on sammobile for gt-i9301i
http://forum.xda-developers.com/attachment.php?attachmentid=1140630
this is odin
Click to expand...
Click to collapse
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9301IXCUAOL3_I9301IITVAOL1_I9301IXXUAOL1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Failed :crying:
WAY 1 : ------- VERY DANGEROUS, NOT TESTED, I'M NOT REAPONSIBLE FOR ANY DAMAGE DONE TO YOUR DEVICE, I WARNED YOU.
You need to get TWRP recovery, then download the Utility from HERE and then mount everything, so that your computer can access your device and then put your Utility wherever you want. Then go to install and select the utility.zip and after the program opens then go to next > primary > wipe System and cache and data and dalvik cache... MAKE A BACKUP FIRST! and then go to ODIN mode and flash your OS...
WAY 2 ----- BETTER
Go to TWRP, wipe all data including system and go to ODIN mode and flash the OS, NOT TESTED ASWELL BUT TRY WITHOUT DELETING SYSTEM FIRST!!!
WAY 3 -------
Flash a custom ROM like CM... if you need help at it, ASK! I'll reply to you as soon as possible!
Good Luck!
FireGhost1337 said:
WAY 1 : ------- VERY DANGEROUS, NOT TESTED, I'M NOT REAPONSIBLE FOR ANY DAMAGE DONE TO YOUR DEVICE, I WARNED YOU.
You need to get TWRP recovery, then download the Utility from HERE and then mount everything, so that your computer can access your device and then put your Utility wherever you want. Then go to install and select the utility.zip and after the program opens then go to next > primary > wipe System and cache and data and dalvik cache... MAKE A BACKUP FIRST! and then go to ODIN mode and flash your OS...
WAY 2 ----- BETTER
Go to TWRP, wipe all data including system and go to ODIN mode and flash the OS, NOT TESTED ASWELL BUT TRY WITHOUT DELETING SYSTEM FIRST!!!
WAY 3 -------
Flash a custom ROM like CM... if you need help at it, ASK! I'll reply to you as soon as possible!
Good Luck!
Click to expand...
Click to collapse
WAY 1
---------
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9301IXCUAOL3_I9301IITVAOL1_I9301IXXUAOL1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
WAY 2
---------
Tried allready. Non worked for me. Like always Stuck.
WAY 3
---------
Tried. It bring me back to recovery when i m trying to boot it
AnroidLover said:
WAY 1
---------
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9301IXCUAOL3_I9301IITVAOL1_I9301IXXUAOL1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
WAY 2
---------
Tried allready. Non worked for me. Like always Stuck.
WAY 3
---------
Tried. It bring me back to recovery when i m trying to boot it
Click to expand...
Click to collapse
Hmm... seems to be a very advanced error but don't worry!
WAY 4 ---------- Safest
Install newest odin and don't check anything in ODIN's settings, the rom will do all that stuff
---------- Post added at 06:48 PM ---------- Previous post was at 06:45 PM ----------
AnroidLover said:
WAY 1
---------
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9301IXCUAOL3_I9301IITVAOL1_I9301IXXUAOL1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
WAY 2
---------
Tried allready. Non worked for me. Like always Stuck.
WAY 3
---------
Tried. It bring me back to recovery when i m trying to boot it
Click to expand...
Click to collapse
Oh by the way you made way 3? You installed the custom rom? As a zip file? Like Cyanogen? And it took you back to recovery? What recovery do you have? And did you UNCHECK the signature check? IT'S VERY IMPORTANT
FireGhost1337 said:
Hmm... seems to be a very advanced error but don't worry!
WAY 4 ---------- Safest
Install newest odin and don't check anything in ODIN's settings, the rom will do all that stuff
---------- Post added at 06:48 PM ---------- Previous post was at 06:45 PM ----------
Oh by the way you made way 3? You installed the custom rom? As a zip file? Like Cyanogen? And it took you back to recovery? What recovery do you have? And did you UNCHECK the signature check? IT'S VERY IMPORTANT
Click to expand...
Click to collapse
I installed Revolution HD as a zip file and i m using TWRP and yes it took me back. Zip file signature was and is unchecked. When i was installing the custom rom everything went fine with the installation of the custom rom.
And u mean with the settings F. Reset Time and other Stuff like that? And where should i put the stock rom? CSC or AP?
I tried with AP :
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> __XmitData_Write
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
By the way my downlaod settings are:
ODIN MODE
PRODUCT NAME: GT-I9300I (ist falsche rom. muss GT-I9301I)
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
QUALCOM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A1, P1
UDC START
AnroidLover said:
I installed Revolution HD as a zip file and i m using TWRP and yes it took me back. Zip file signature was and is unchecked. When i was installing the custom rom everything went fine with the installation of the custom rom.
And u mean with the settings F. Reset Time and other Stuff like that? And where should i put the stock rom? CSC or AP?
I tried with AP :
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> __XmitData_Write
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
By the way my downlaod settings are:
ODIN MODE
PRODUCT NAME: GT-I9300I (ist falsche rom. muss GT-I9301I)
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
QUALCOM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A1, P1
UDC START
Click to expand...
Click to collapse
Try to change cable usb
Alessandro's said:
Try to change cable usb
Click to expand...
Click to collapse
I tried. Failed again ! :crying::crying:
HELP ME PLEASE :crying::crying:
Alessandro's said:
Click to expand...
Click to collapse
That problem is omg. I dont know where the problem is :crying:
Alessandro's said:
Click to expand...
Click to collapse
Hey Jow, i got another usb cable. Now its says always Unknwon Device (also in Odin no added Message)
I'm currently having "Kernel is not Seandroid enforcing" error message.
First, I rooted my phone, then preparing into flashing a custom ROM and kernel.
I downloaded Extended battery (v 2.91.45) - N910C/H for Kernel and Nemesis for ROM.
Wipe cache and etc then flash the kernel via TWRP first while I was downloading the Custom ROM.
Rebooted after I flashed the Kernel (maybe I screwed up here because I don't have any ROM installed yet?)
Phone couldn't go anywhere past the boot screen which shown "Kernel is not Seandroid enforcing" error message.
After searching the internet, people suggested to flash the stock ROM via ODIN, but then I have these errors on Odin 3 v3.04
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910GDTU1COJ5_N910GOLB1COJ1_N910GDTU1COJ4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
And no response on Odin3 v3.12
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1205)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
I'm flashing with the latest stock ROM in my Country.
Tried different USB ports
Tried different USB cables.
Tried factory reset/ manual wipes
OS : 6.0.1
Model : SM-N910C - Samsung Note 4
What else can I do on my end before sending it to shops ?
Lozyness said:
I'm currently having "Kernel is not Seandroid enforcing" error message.
First, I rooted my phone, then preparing into flashing a custom ROM and kernel.
I downloaded Extended battery (v 2.91.45) - N910C/H for Kernel and Nemesis for ROM.
Wipe cache and etc then flash the kernel via TWRP first while I was downloading the Custom ROM.
Rebooted after I flashed the Kernel (maybe I screwed up here because I don't have any ROM installed yet?)
Phone couldn't go anywhere past the boot screen which shown "Kernel is not Seandroid enforcing" error message.
After searching the internet, people suggested to flash the stock ROM via ODIN, but then I have these errors on Odin 3 v3.04
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910GDTU1COJ5_N910GOLB1COJ1_N910GDTU1COJ4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Model : SM-N910C - Samsung Note 4
What else can I do on my end before sending it to shops ?
Click to expand...
Click to collapse
i think you have a problem on your firmware. As you can see, you have a N910C and you are using the firmware for N910G, it's totally different.
Find a latest firmware for N910C.
And it's normal to have "Kernel is not seandroid enforcing" if you have a custom kernel installed