Hay,
i tried to reset my X2 and ih stoped at half of the customizing proces. It stayed that way all nigt. Than I hard reseted it again. Now when I try to turn it on is stops at sony ericsson logo. I tried to pres volume down button together with power button and it worked! White screen with SE logo. Folowing instructions from SE PC Companion repair proces, I conected it with PC, and than regognition of new device started. Message apeared "USB composite device driver not found" and PC companion couldn't find/repair it because device was not installed properly. I tried it on 4 diferent PC's, with diferent windows, with latest software and drivers. Any idea what to do? And how can i find SEUS to instal it? I know that there is similar treads but not for this phone. Bad english, sorry.
solved
SEUS found, phone recognised. Yey!
unsuccesful
The Update was unsuccesful! F! What now?
idea? anyone?
hi everyone
I'm facing the same problem, my computer can't identify x2 when I connect it "windows 7 ultimate 32 bit"
it gave me unknown device when I opened the device manager and windows update can't find the device drivers.
what should I do to let it recognize my device in order to complete the update
by the way , my phone is not usable now , it is just hang on windows logo when I switch it on and removing the battery the only way to switch it off
I really need your help guys, I have been trying SEUS for more than week
I tried to downgrade from Kitkat to JB via flashtool this morning which I often successfully flashed with the same method. But while the flashing is going on and almost finish the flashing (system.img, userdata.img, etc. are already flashed), there seems to be some problem and popped out that the flashing is fail. And then the device does not boot up. While I tried to reconnect the device to PC, the PC cannot recognize the device as shown in the picture. Unable to process any further method. Does anyone in this forum knows how to recover the bricked device like this?
The phone starts? In a black screen?
If the PC detects it like that the phone has some energy and connection...
Does anything apears on the screen? Can you go to the Recovery Mod?
Have you tried to force the driver installation on that USB item that appears on device manager?
Do you have access via ADB or fastboot?
Did you nottest in what partition did the error message appeared?
Please provide some answers to these questions so i can try to help you...
RSGI_PT said:
The phone starts? In a black screen?
If the PC detects it like that the phone has some energy and connection...
9Does anything apears on the screen? Can you go to the Recovery Mod?
Have you tried to force the driver installation on that USB item that appears on device manager?
Do you have access via ADB or fastboot?
Did you nottest in what partition did the error message appeared?
Please provide some answers to these questions so i can try to help you...
Click to expand...
Click to collapse
Nothing on the screen. Not able to boot into recovery or adb is not working. The phone is just death. But, when I insert the usb cable, the pc can detect it. I even approach the Customer Care here in Aizawl, but they cannot fixed. Even when I followed the instruction as per one xda member posted here, The qualcom hs - 9006/8 is displayed on the device manager and when I tried to flashed it with emergency mode, the result always the same. FAILS
hruaiapunte said:
Nothing on the screen. Not able to boot into recovery or adb is not working. The phone is just death. But, when I insert the usb cable, the pc can detect it. I even approach the Customer Care here in Aizawl, but they cannot fixed. Even when I followed the instruction as per one xda member posted here, The qualcom hs - 9006/8 is displayed on the device manager and when I tried to flashed it with emergency mode, the result always the same. FAILS
Click to expand...
Click to collapse
Try this:
- Start GNQC with the phone disconnected
- Connect the Phone and see GNQC recognizes the QLoader
- If so, press power button until the phone vibrates
- Wait for the GNQC recognizes again the QLoader and press Download on Emergency Mode
Use this KIKAT ROM: https://docs.google.com/uc?id=0B8H5JoBDpTnJMGE2QTJPR0FWX0E
This worked for me, i had the phone completly died, not even recognized by the PC, waited a day and tried again.
Once the QLoader is recognized your good to go!!
I'm having another problem after that, now theres no GSM/3G signals....
I need a EFS backup with the TWRP recovery.... No one seems to have
RSGI_PT said:
Try this:
- Start GNQC with the phone disconnected
- Connect the Phone and see GNQC recognizes the QLoader
- If so, press power button until the phone vibrates
- Wait for the GNQC recognizes again the QLoader and press Download on Emergency Mode
Use this KIKAT ROM: https://docs.google.com/uc?id=0B8H5JoBDpTnJMGE2QTJPR0FWX0E
This worked for me, i had the phone completly died, not even recognized by the PC, waited a day and tried again.
Once the QLoader is recognized your good to go!!
I'm having another problem after that, now theres no GSM/3G signals....
I need a EFS backup with the TWRP recovery.... No one seems to have
Click to expand...
Click to collapse
my e7 died. you are stuck using flash tools. is not even recognized by most PCs. maybe it drain? I can do? help me
I have the same problem, screen is completely black after trying to instal newer official rom. When I connect it to PC, it detects "hid device". I tried power + volume buttons combinations, but nothing changes. Sometimes notification led turn red for a few seconds but nothing else. And once win xp randomly detected phone as that "q..." thing, but it doesn't anymore. What else can I do?
Can anyone help me? I tried everything and my phone is still hardbricked.
Hello guys
Today i received my E7 and i tried to update via the tool unfortunately something went wrong and now i cant open it nor fastboot or recovery. Some hours ago i tried to connect via usb and appeared on the GNQC but later it showed as unknow device. It was my first day with the phone. Right when i connect /disconnect the usb i can hear the sound but i cant do anything. Is it dead or i can revive it somehow?
It was the first day:crying::crying:
Reinstall the drivesbob the PC, press 30 secs on the power button than connect the phone to the PC. If appears a QLoader port use emergency download on gnqc 1.6.9.0
RSGI said:
Reinstall the drivesbob the PC, press 30 secs on the power button than connect the phone to the PC. If appears a QLoader port use emergency download on gnqc 1.6.9.0
Click to expand...
Click to collapse
PLZ HELP i try to update using this http://www.needrom.com/download/gionee-elife-e7-32g/comment-page-2/#comment-165291 but now my phone doest enen boot or fast boot or anything.. in the proces it said "firehose ping phone fail" and stopped updating since then my phone isnt booting or anything and my pc dont recognize it any more.. plz help
---------- Post added at 15:32 ---------- Previous post was at 15:29 ----------
RSGI_PT said:
The phone starts? In a black screen?
If the PC detects it like that the phone has some energy and connection...
Does anything apears on the screen? Can you go to the Recovery Mod?
Have you tried to force the driver installation on that USB item that appears on device manager?
Do you have access via ADB or fastboot?
Did you nottest in what partition did the error message appeared?
Please provide some answers to these questions so i can try to help you...
Click to expand...
Click to collapse
plz help...
PLZ HELP i try to update using this http://www.needrom.com/download/gion...comment-165291 but now my phone doest enen boot or fast boot or anything.. in the proces it said "firehose ping phone fail" and stopped updating since then my phone isnt booting or anything and my pc dont recognize it any more.. plz help
thianpa he thil hi i solve thei toh m
I have a Lumia 520 (RM-915 version) 520 with windows 8.1 Developer Preview. Cyan Lumia wanted to install update so I used the software recovery tool for downloading Nokia firmware version 3058.50000.1425.0001. Installation began and showed an error of 1%. An option to recover appeared and tried but could not. Now the phone is bricked and when connected to the PC, shown as QHSUSB_DLOAD device. In Nokia Care Suite PST shown as USB: The product in flash mode selection data packets failed and reading product codes no error. When I select Open Product, select the device and select the data packet, which tells me hold Down + Power button until it vibrates and then retry. When I try no vibration could only see that the USB is disconnected and reconnected. Is there no way to recover it at home using my pc and usb cable?
use the following programs: nokia care suite, nokia software recovery tools, lumia software recovery tools, windows phone recovery tools
I leave you with this hope your help as possible to please
regards!!!!! :crying::crying::crying::crying:
Crispyn said:
I have a Lumia 520 (RM-915 version) 520 with windows 8.1 Developer Preview. Cyan Lumia wanted to install update so I used the software recovery tool for downloading Nokia firmware version 3058.50000.1425.0001. Installation began and showed an error of 1%. An option to recover appeared and tried but could not. Now the phone is bricked and when connected to the PC, shown as QHSUSB_DLOAD device. In Nokia Care Suite PST shown as USB: The product in flash mode selection data packets failed and reading product codes no error. When I select Open Product, select the device and select the data packet, which tells me hold Down + Power button until it vibrates and then retry. When I try no vibration could only see that the USB is disconnected and reconnected. Is there no way to recover it at home using my pc and usb cable?
use the following programs: nokia care suite, nokia software recovery tools, lumia software recovery tools, windows phone recovery tools
I leave you with this hope your help as possible to please
regards!!!!! :crying::crying::crying::crying:
Click to expand...
Click to collapse
using USB Cable no , maybe if anyone find or crack Best Box infinity last version you can unbrick by usb
else , you have to use a box like riff or JTAG
I used wpinternals to flash a firmware to my phone. It was during the flashing that I got to know that the firmware I was flashing is not the one for my phone(my phone is a Nokia lumi 520 RM-914, and I was flashing the firmware for RM-915) after the whole flashing process, my phone won't come on, and it won't boot into recovery or any sort. If I plug the phone through a USB to a computer, the computer makes a sound that it detected the phone, but nothing happens. I have tried windows software recovery tool, but it says emergency package failed to install... Please what do I do. (P.s after the flashing when wpinternals was rebooting the phone to normal mode a driver was installed on my system: emergency care suite)
Hi,
I have one idea. After Windows Device Recovery Tool detects the phone, you may have the phone on some mode. From there WPinternals might be able to detect the phone. Try to flash the phone with WPinternals.
Hey there guys!!!
Can you please help me with this?
Yesterday i tried to install a new ROM on my LG Android phone (My LG phone is not working properly, it has a reboot loop). I tried to do a factory reset without success -> the dead Android logo appeared :/
I put my phone in Download Mode and connected to the pc but Windows does not recognize my phone.. it says: "USB device not recognized.. the last USB device you connected to this computer malfunctioned and Windows does not recognize it"
I do not know what to do now.. when i try to flash a ROM with the LG Flash Tool it fails because LG program does not recognize my device..
PS: LG Support Tool recognizes my phone (it shows the model) but i cannot flash a ROM
Thanks!!:fingers-crossed: