hello, I come to you to present you a problem I encountered with my s7 edge .
Three times the brightness sensor stopped working . I also noticed that when I encounter this bug , the gyro sensors no longer work either and It's impossible to get the phone in landscape mode .
In the application cup- z no sensor is detected.
After the device restart everything is back in order.
Someone already encountered this problem ?
Grolow said:
In the application cup- z no sensor is detected.
Click to expand...
Click to collapse
Next time to test the sensors dial *#0*# in the stock dialer app.
Hey, thanks for the tip !
Any resolution? This started happening to me too, and nothing seems to fix it. I loaded the U rom, factory reset to the verizon rom and no dice. Samsung will replace my phone, but then I'm out a phone for 2 weeks and my screen protector.
I downloaded app to see why my gyro is weird and there i can se that gyro or orientation does not work and it did before joining beta.
Is this a known issue?
Can i solve it somehow?
I got ota yesterday so a pretty new build i guess
I am not rotted i havet it all original
I've had a similar if not the exact same issue as of obtaining this device. I enrolled in the beta around the third Dev preview (immediately after I purchased the phone, it's still fairly new as of writing this), at the end of the fourth preview I started having the same issue, gyroscope just spontaneously stopped working. At first I thought it was a hardware issue after doing some research (apparently some Nexus 6P users gyroscopes are just getting stuck or something along the lines of that?? And they'll report it working again after a few good smacks to the thigh.) I would have assumed this to be the issue but I found that rebooting the device actually fixed it temporarily, but after a few hours it stops working again. I'm now using the fifth and final dev preview and it's still an issue. The fact that rebooting fixes the issue (temporarily) and not smacking the phone around in my scenario leads me to believe this is a dev preview bug.
Yeah it looks like it. Never har trouble before but after updating ro beta it started.
Anyone know if this is a known bug?
its a known bug just restart your phone if gyro isnt working.
I don´t know if it´s a coincidence or not, but I a few days after the update to Oxigen OS 3.6.1 I noticed that the proximity sensor and light sensor of my ONEPLUS 2 stopped working.
I used AndroSenor and Sensor box from the PlayStore, and both os them say thar the proximity and light sensors are missing.
I had a remote session with a ONEPLUS L2 specialist and they wiped my phone and reflashed the latest ROM (ver. 3.6.1), but the problem wasn´t solved..
I guess that, if the sensors don´t appear in the apps I mentioned maybe it´a a hardware problem, but I would like to hear more opinions.
If anyone has any suggestion to try to solve this problem before sending it to repair (out of warranty)??
flash persist.img from fastboot
backup all your info
in some cases it will help
hi there!
I seem to be having quite a similar problem, though, my sensors work, but stop responding after an unspecified period of time (can be anywhere between minutes and hours).
I tried flashing several roms (oreo, nougat) and yesterday i flashed Oreo Pixel Experience (just pure ROM+OP5 camera, no root no custom kernel just to rule out a few things) but the issue remains. Important to mention, i always clean flash.
The best way to describe the issue is: "sometimes the proximity and light sensor just stop working and i dont really know why" which is obviously causing a whole bunch of issues with auto brightness, making calls, picking up when someone calls etc.
The thing is, everything works after a reboot...but only for some time...then the sensors go "offline".
sometimes they work for a couple of hours, even a day...sometimes they die after half an hour or something. I have a feeling that i see them die faster when i have my phone in the pocket and leave it idle for a while, and when i use my phone often and dont really give the phone time to rest they live longer. It almost feels as if the phone goes to some deep sleep when idle for some time, disconnects the sensors, but doesnt turn them on again when woken up.
tried flashing the persist.img as advised just above, but it doesnt seem to have an effect.
anyone has any good idea?
thanks!
allright, being desperate from not being able to use my phone in a normal way i flashed OOS 3.6.1 from official zip files that can be downloaded from oneplus.net support section, using OP recovery and surprise surprise - sensors are working flawlessly! so im ruling out the HW problem. I think im going to stick to OOS for a while to monitor the sensors and eventually im going to try flashing oreo again.
ok, last update from my side: after two days on OOS where everything worked fine i flashed Pixel Oreo build and sensors continue working just fine! so, whoever is experiencing strange behavior of his sensors, i recommend the same approach.
Jackill said:
ok, last update from my side: after two days on OOS where everything worked fine i flashed Pixel Oreo build and sensors continue working just fine! so, whoever is experiencing strange behavior of his sensors, i recommend the same approach.
Click to expand...
Click to collapse
You still have working sensors?
I have exactly the same behavior as you mentioned in your first post. FRUSTRATING!
I've tried flash lineageos 15.1 ROM, no luck. New persist.img from official fastboot oos ROM but no luck either.
flaektrem said:
You still have working sensors?
I have exactly the same behavior as you mentioned in your first post. FRUSTRATING!
I've tried flash lineageos 15.1 ROM, no luck. New persist.img from official fastboot oos ROM but no luck either.
Click to expand...
Click to collapse
Hi! Yes, my sensors are still working just nicely.
Jackill said:
Hi! Yes, my sensors are still working just nicely.
Click to expand...
Click to collapse
So good for you ?
Before when your sensors struggled, did they also disappear from any sensor test app. Or did they just not work?
My prox sensor did not disappear but just hangs at 0 or 5cm if I check the value in any sensor app. And light turns 0 Lux also.
I've similar problem. Went completely stock as suggested but the problem persisted.
flaektrem said:
So good for you
Before when your sensors struggled, did they also disappear from any sensor test app. Or did they just not work?
My prox sensor did not disappear but just hangs at 0 or 5cm if I check the value in any sensor app. And light turns 0 Lux also.
Click to expand...
Click to collapse
Well mine didnt really "dissappear" either. They "froze" too. Lux froze at whatever value it measured the last however i am almost certain it was never exactly 0. Prox behaved the same as you describe: 0 or 5.
lazyfarmer said:
I've similar problem. Went completely stock as suggested but the problem persisted.
Click to expand...
Click to collapse
Interesting. I'm going to flash OOS recovery and latest OOS ROM later today and give it a try.
Jackill said:
Well mine didnt really "dissappear" either. They "froze" too. Lux froze at whatever value it measured the last however i am almost certain it was never exactly 0. Prox behaved the same as you describe: 0 or 5.
Click to expand...
Click to collapse
My lightsensor always freezes at 0 Lux. And when the prox freeze at 0 its impossible to quit a call. So f*cking frustrating so I have to fix this problem ASAP
I have the same problem with my LUX device, sometimes the sensors work randomly. When I reboot my phone the sensors stop working. The screen does not rotate, the most interesting thing is that it did flash the Moto camera mod and the rotation works perfectly with the camera, with the stock camera there is no rotation.
UPDATE:
I scheduled a remote session with Oneplus L2 Team and they performed a full factory reset of all partitions. No luck, problems still persist.
It must be a hardware problem.
In my case I sent the smartphone to them and they said it was a problem with the motherboard.
hey guys i have the phone for almost a year now, without problems but suddenly the fingerprint sensor stopped working and the phone was lagging extremely hard, the sensor works partially but not with a recognizable pattern, sometimes it may work (if im lucky to enroll a FP)
ive tried everything, re-partitioned back to stock, flashed stock, changed kernels, flash non treble, every rom has the same problem
does anyone else faced any similar issues?
The WiFi Direct screen when I opened it seems to start flickering continuously. Is this issue something all users are facing or is my device faulty ? Also of anyone has faced similar issues earlier could they guide me in how to solve it. There were many wifi related issues when Oreo was first launched. My suspicion is that this was one that got away unnoticed