Database Users

[Q] compiling kernel. Please give me some help.

Hello. When i try compile my kernel i got some errors
I'm using theese commands:
Code:
make ARCH=arm iconiaa500_defconfig
with no problems it says 'configuration written to .config' then i cant find that file.
whet i try to compile it with this command
Code:
make ARCH=arm CROSS_COMPILE=/home/myhomedir./A500-kernel/toolchains/arm-2009q3/bin/arm-none-eabi- -j3
then at the end i get something like:
Code:
drivers/usb/host/ehci-hub.c:130: warning: 'ehci_adjust_port_wakeup_flags' defined but not used
drivers/usb/host/ehci-lpm.c:20: warning: 'ehci_lpm_set_da' defined but not used
drivers/usb/host/ehci-lpm.c:40: warning: 'ehci_lpm_check' defined but not used
net/mac80211/tx.c: In function 'ieee80211_subif_start_xmit':
net/mac80211/tx.c:1753: warning: unused variable 'mppath'
arch/arm/boot/compressed/piggy.lzo.S: Assembler messages:
arch/arm/boot/compressed/piggy.lzo.S:4: Error: file not found: arch/arm/boot/compressed/piggy.lzo
make[2]: *** [arch/arm/boot/compressed/piggy.lzo.o] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [arch/arm/boot/compressed/vmlinux] Error 2
make: *** [zImage] Error 2
make: *** Waiting for unfinished jobs....
anyone knows whats problem? thanks for spending some time. Sorry for bad english.
I was try many guides include nethams and sp3dev's
HTML:
http://forum.xda-developers.com/showthread.php?t=1158260&page=24
HTML:
http://forum.xda-developers.com/showthread.php?t=1158260&page=9
I'm using astarasikov-iconia-gnu-kernel source.
Sorry for bad English.

Tautvaldas said:
Hello. When i try compile my kernel i got some errors
Sorry for bad English.
Click to expand...
Click to collapse
You may want to post this in the main Android Dev thread.

where? Questions and Answers? maybe.

Never mind, thanks, no need it anymore, I've got it, fixed all problems and found solutions. thanks.

One more question. If i set initrd files location in kernel config, can i unpack initramfs.cpio from my compiled kernel zImage after compile it. I tryed unpack .config file from zImage, it works fine, but i want unpack initramfs if it possible?

[Q/A] Build Errors and such...

Ok guys lets all post our build errors here for a more organized help and support. And so that we can help each other out
Sent from my Gnome Shelled Mako

Good idea , hope someone will know this one.
Export includes file: hardware/libhardware_legacy/audio/Android.mk -- /home/elio/android/omni/out/target/product/mako/obj/SHARED_LIBRARIES/audio_policy.default_intermediates/export_includes
Export includes file: hardware/qcom/display/libgenlock/Android.mk -- /home/elio/android/omni/out/target/product/mako/obj/SHARED_LIBRARIES/libgenlock_intermediates/export_includes
Export includes file: device/lge/mako/camera/mm-camera-interface/Android.mk -- /home/elio/android/omni/out/target/product/mako/obj/SHARED_LIBRARIES/libmmcamera_interface2_intermediates/export_includes
make: *** No rule to make target `/home/elio/android/omni/out/target/product/mako/obj/KERNEL_OBJ/usr', needed by `/home/elio/android/omni/out/target/product/mako/obj/SHARED_LIBRARIES/libgenlock_intermediates/genlock.o'. Stop.
make: *** Waiting for unfinished jobs....
Import includes file: /home/elio/android/omni/out/target/product/mako/obj/SHARED_LIBRARIES/libmmcamera_interface2_intermediates/import_includes
Click to expand...
Click to collapse
i have been trying to build for mako and i get stuck at this error.
i'm ubuntu 12.04 64bit.

Looks like a kernel error.
Add this lines to your local_manifest
Code:
<project name="omnirom/android_device_lge_mako" path="device/lge/mako" remote="github" revision="android-4.3" />
<project name="omnirom/android_kernel_lge_mako" path="kernel/lge/mako" remote="github" revision="android-4.3" />
then
Code:
repo sync -j4 && make clean && . build/envsetup.sh && time brunch mako

fix for most errors
Gnome said:
Ok guys lets all post our build errors here for a more organized help and support. And so that we can help each other out
Sent from my Gnome Shelled Mako
Click to expand...
Click to collapse
I am just starting out on building Roms but for almost any error even if you can't fix it just delete your folder/directory with the source and reinitialize repo in a new directory
Sent from my lg optimus f6 which boot loader can't be unlocked I'm never getting a new lg phone

help
alright ive been trying to port kitkat to my f6 for a week or so and i just hit this error and yes i have included msmb_camera.h in my PATH and put it in a few dirs named media also in my usr/bin and /bin and /sbin can anyone find how to fix it here it is
Code:
make: *** [/home/ryan/android/system/out/target/product/f6mt/obj/SHARED_LIBRARIES/libOmxVenc_intermediates/venc/src/video_encoder_device.o] Error 1
make: *** Waiting for unfinished jobs....
In file included from hardware/qcom/camera/QCamera2/stack/mm-camera-interface/src/mm_camera_channel.c:40:0:
hardware/qcom/camera/QCamera2/stack/mm-camera-interface/../common/mm_camera_interface.h:34:31: fatal error: media/msmb_camera.h: No such file or directory
compilation terminated.
In file included from hardware/qcom/camera/QCamera2/stack/mm-camera-interface/src/mm_camera_stream.c:44:0:
hardware/qcom/camera/QCamera2/stack/mm-camera-interface/../common/mm_camera_interface.h:34:31: fatal error: media/msmb_camera.h: No such file or directory
compilation terminated.
In file included from hardware/qcom/camera/QCamera2/stack/mm-camera-interface/src/mm_camera.c:42:0:
hardware/qcom/camera/QCamera2/stack/mm-camera-interface/../common/mm_camera_interface.h:34:31: fatal error: media/msmb_camera.h: No such file or directory
compilation terminated.
In file included from hardware/qcom/camera/QCamera2/stack/mm-camera-interface/src/mm_camera_interface.c:40:0:
hardware/qcom/camera/QCamera2/stack/mm-camera-interface/../common/mm_camera_interface.h:34:31: fatal error: media/msmb_camera.h: No such file or directory
compilation terminated.
make: *** [/home/ryan/android/system/out/target/product/f6mt/obj/SHARED_LIBRARIES/libmmcamera_interface_intermediates/src/mm_camera_channel.o] Error 1
make: *** [/home/ryan/android/system/out/target/product/f6mt/obj/SHARED_LIBRARIES/libmmcamera_interface_intermediates/src/mm_camera_stream.o] Error 1
make: *** [/home/ryan/android/system/out/target/product/f6mt/obj/SHARED_LIBRARIES/libmmcamera_interface_intermediates/src/mm_camera.o] Error 1
make: *** [/home/ryan/android/system/out/target/product/f6mt/obj/SHARED_LIBRARIES/libmmcamera_interface_intermediates/src/mm_camera_interface.o] Error 1
UPADTE
alright i solved this by puting msmb_camera.h in hardware/qcom/msm8x74/kernel-headers/media
please hit that thanks button if i helped

codingninja62001 said:
alright ive been trying to port kitkat to my f6 for a week or so and i just hit this error and yes i have included msmb_camera.h in my PATH and put it in a few dirs named media also in my usr/bin and /bin and /sbin can anyone find how to fix it here it is
Code:
make: *** [/home/ryan/android/system/out/target/product/f6mt/obj/SHARED_LIBRARIES/libOmxVenc_intermediates/venc/src/video_encoder_device.o] Error 1
make: *** Waiting for unfinished jobs....
In file included from hardware/qcom/camera/QCamera2/stack/mm-camera-interface/src/mm_camera_channel.c:40:0:
hardware/qcom/camera/QCamera2/stack/mm-camera-interface/../common/mm_camera_interface.h:34:31: fatal error: media/msmb_camera.h: No such file or directory
compilation terminated.
In file included from hardware/qcom/camera/QCamera2/stack/mm-camera-interface/src/mm_camera_stream.c:44:0:
hardware/qcom/camera/QCamera2/stack/mm-camera-interface/../common/mm_camera_interface.h:34:31: fatal error: media/msmb_camera.h: No such file or directory
compilation terminated.
In file included from hardware/qcom/camera/QCamera2/stack/mm-camera-interface/src/mm_camera.c:42:0:
hardware/qcom/camera/QCamera2/stack/mm-camera-interface/../common/mm_camera_interface.h:34:31: fatal error: media/msmb_camera.h: No such file or directory
compilation terminated.
In file included from hardware/qcom/camera/QCamera2/stack/mm-camera-interface/src/mm_camera_interface.c:40:0:
hardware/qcom/camera/QCamera2/stack/mm-camera-interface/../common/mm_camera_interface.h:34:31: fatal error: media/msmb_camera.h: No such file or directory
compilation terminated.
make: *** [/home/ryan/android/system/out/target/product/f6mt/obj/SHARED_LIBRARIES/libmmcamera_interface_intermediates/src/mm_camera_channel.o] Error 1
make: *** [/home/ryan/android/system/out/target/product/f6mt/obj/SHARED_LIBRARIES/libmmcamera_interface_intermediates/src/mm_camera_stream.o] Error 1
make: *** [/home/ryan/android/system/out/target/product/f6mt/obj/SHARED_LIBRARIES/libmmcamera_interface_intermediates/src/mm_camera.o] Error 1
make: *** [/home/ryan/android/system/out/target/product/f6mt/obj/SHARED_LIBRARIES/libmmcamera_interface_intermediates/src/mm_camera_interface.o] Error 1
UPADTE
alright i solved this by puting msmb_camera.h in hardware/qcom/msm8x74/kernel-headers/media
please hit that thanks button if i helped
Click to expand...
Click to collapse
Most likely Omni does not have any non-Nexus devices that compile the camera HAL from source, and as a result does not yet pull in kernel headers for the camera HAL.
https://github.com/omnirom/android_...mmit/6736097aeaed860eefdf90ebbb145cc310b564b4 can give you a rough idea of how to convert something set to use prebuilt kernel headers to one that uses headers from the kernel being built.
What's an f6???

Entropy512 said:
Most likely Omni does not have any non-Nexus devices that compile the camera HAL from source, and as a result does not yet pull in kernel headers for the camera HAL.
https://github.com/omnirom/android_...mmit/6736097aeaed860eefdf90ebbb145cc310b564b4 can give you a rough idea of how to convert something set to use prebuilt kernel headers to one that uses headers from the kernel being built.
What's an f6???
Click to expand...
Click to collapse
okey it isn't omni its cyanogenmod and f6 as LG optimus f6 a budget phone that ive working on a port for and can you explain in a little more detail and my KERNEL_OBJ/usr is empty so no source there
---------- Post added at 05:13 PM ---------- Previous post was at 04:35 PM ----------
Entropy512 said:
Most likely Omni does not have any non-Nexus devices that compile the camera HAL from source, and as a result does not yet pull in kernel headers for the camera HAL.
https://github.com/omnirom/android_...mmit/6736097aeaed860eefdf90ebbb145cc310b564b4 can give you a rough idea of how to convert something set to use prebuilt kernel headers to one that uses headers from the kernel being built.
What's an f6???
Click to expand...
Click to collapse
Hey can you help me with this new error i had fixed that one yesterday not much detail it spits out do you know how to declare GRALLOC_USAGE_PRIVATE_INTERNAL_ONLY or fix this
Code:
frameworks/native/libs/gui/Surface.cpp: In member function 'virtual android::status_t android::Surface::lock(ANativeWindow_Buffer*, ARect*)':
frameworks/native/libs/gui/Surface.cpp:818:29: error: 'GRALLOC_USAGE_PRIVATE_INTERNAL_ONLY' was not declared in this scope
make: *** [/home/ryan/android/system/out/target/product/f6mt/obj/SHARED_LIBRARIES/libgui_intermediates/Surface.o] Error 1
make: *** Waiting for unfinished jobs....

Please help me
build/core/base_rules.mk:316: warning: overriding commands for target `/home/govind/n/out/target/product/Z00L/system/xbin/wget' ./external/busybox/Android.mk:171: warning: ignoring old commands for target `/home/govind/n/out/target/product/Z00L/system/xbin/wget' vendor/cm/build/tasks/kernel.mk:285: warning: overriding commands for target `/home/govind/n/out/target/product/Z00L/obj/KERNEL_OBJ/.config' build/core/tasks/kernel.mk:209: warning: ignoring old commands for target `/home/govind/n/out/target/product/Z00L/obj/KERNEL_OBJ/.config' vendor/cm/build/tasks/kernel.mk:299: warning: overriding commands for target `TARGET_KERNEL_BINARIES' build/core/tasks/kernel.mk:220: warning: ignoring old commands for target `TARGET_KERNEL_BINARIES' vendor/cm/build/tasks/kernel.mk:348: warning: overriding commands for target `kerneltags' build/core/tasks/kernel.mk:252: warning: ignoring old commands for target `kerneltags' vendor/cm/build/tasks/kernel.mk:353: warning: overriding commands for target `kernelconfig' build/core/tasks/kernel.mk:255: warning: ignoring old commands for target `kernelconfig' vendor/cm/build/tasks/kernel.mk:372: warning: overriding commands for target `/home/govind/n/out/target/product/Z00L/kernel' build/core/tasks/kernel.mk:269: warning: ignoring old commands for target `/home/govind/n/out/target/product/Z00L/kernel' Starting build with ninja ninja: Entering directory `.' ninja: error: '/home/govind/n/out/target/product/Z00L/obj/SHARED_LIBRARIES/libqmiservices_intermediates/export_includes', needed by '/home/govind/n/out/target/product/Z00L/obj/EXECUTABLES/wcnss_service_intermediates/import_includes', missing and no known rule to make it make: *** [ninja_wrapper] Error 1 #### make failed to build some targets (25 seconds) #### Build step 'Execute shell' marked build as failure FTP: Current build result is [FAILURE], not going to run. Finished: FAILURE

https://hastebin.com/qixotiyuqo.sql plz help me in sorting out this error

[ Guide ] [ Tutorial ] Compiling 64 bit Android Kernel [ Yureka ] [ NOOB Friendly ]

This is My first post on XDA
From the day I owned YUreka I always wished to compile my own kernel. I searched on the web for compiling 64bit android kernel but didn't get satisfying results. So I did some research and asked some android developers, I got help from some developers but some of the developer refused may be due to their attitude or may be they didn't want to share their ideas / knowledge. Anyways here's a guide for compiling 64 bit kernel. I have also made a video tutorial check that out [ status == uploaded ].
What will YU need :
1. Ubuntu 64 Bit OS
2. Good Internet Connection.
3. Usable Brain.
4. Basic Knowledge of Linux.
Lets Start
First we need to get some important stuff / tools / software .
1. Open Ubuntu Software center and install JDK 7 or JDK 8
2. Open terminal and run the following command
Code:
sudo apt-get install libncurses5-dev
Code:
sudo apt-get install git-core gnupg flex bison gperf build-essential zip curl libc6-dev libncurses5-dev:i386 x11proto-core-dev libx11-dev:i386 libreadline6-dev:i386 libgl1-mesa-glx:i386 libgl1-mesa-dev g++-multilib tofrodos python-markdown libxml2-utils xsltproc zlib1g-dev:i386
Code:
sudo ln -s /usr/lib/i386-linux-gnu/mesa/libGL.so.1 /usr/lib/i386-linux-gnu/libGL.so
Code:
sudo apt-get install -y ccache &&echo 'export PATH="/usr/lib/ccache:$PATH"' | tee -a ~/.bashrc &&source ~/.bashrc && echo $PATH
Code:
export USE_CCACHE=1
Code:
mkdir ~/bin
Code:
export PATH=~/bin:$PATH
Code:
curl https://dl-ssl.google.com/dl/googlesource/git-repo/repo > ~/bin/repo
Code:
chmod a+x ~/bin/repo
Now YU'r Linux machine is all set to compile kernel.
3. Now YU need to download a toolchain. I have uploaded the toolchain that i used for compiling the kernel. Click from here > h t t p s ://drive.google.com/open?id=0B9D4jOdpRzZHOURMTS1VaXplc0U
4. Time to download Kernel sources. For this tutorial I am using Varun Chitre's Thunderzap kernel. Here is the link for thunderzap's sources > h t t p s ://github.com/varunchitre15/thunderzap_tomato
.Select branch as cm 12.1 from left and press download on the right.
5. Make a directory "android-kernel" under "/Home" and place both the zips in "android-kernel" directory.
6. Extract both the zips. Now YU will have two folders one of toolchain and other of kernel source.
7. YU no more need the zip files just delete both the zips.
8. Open the kernel source folder and type the following code.
9. Run the following command to point the variable to toolchains path :
Code:
export CROSS_COMPILE=/home/r0h4n/android-kernel/aarch64-linux-android-4.9-uber-master/bin/aarch64-linux-android-
If YU followed along with me YU will just have to change the name of the user ( replace <r0h4n> with <YU'r username> )
10. Time to Compile your kernel :
Code:
export ARCH=arm64
Code:
export SUBARCH=arm64
Code:
export USE_CCACHE=1
Code:
make cyanogenmod_tomato-64_defconfig
The name of defconfig file may be different check it in "kernel_source/arch/arm64/defconfig/"
Code:
make menuconfig
Here YU can explore various options. I'll not explain everything in detail here.
Now the final command make. It takes a parameter -jn. Where ( n = # of threads per core + 1 )
I have a Dual core processor with 2 thread per processor so for me it is " make -j3 ".
Code:
make -j3
Now sit back and relax.......let the kernel compile
Got a compilation error ?
Post it here.
Now we need to create a flashable zip. Download this kernel flash zip from here > h t t p s : //drive.google.com/open?id=0B9D4jOdpRzZHdTJibndqQzhVdFk
1. Extract kernel.zip.
2. Navigate to tools in "/kernel".
3. Open "kernel_source/arch/arm64/boot/".
4. Copy "Image".
5. Replace it with the "Image" in "/kernel/tools/Image".
6. Copy "kernel_source/driver/stagging/prima/wlan.ko" and replace it with "kernel/system/lib/modules/wlan.ko".
7. Goto "/kernel" select all the three folders "META-INF", "system", "tools" and rezip it.
8. Flash the zip via recovery and now YU'r Phone rocks YU'r own compile kernel.

Rohan459 said:
This is My first post on XDA
Click to expand...
Click to collapse
Life saver for the 64bit part, thank you very much! :good::good::good:

some issues
Hello, i'm trying to compile this kernel (for xiaomi redmi note 3 "kenzo") https://github.com/cyanogenmod/android_kernel_xiaomi_msm8956/tree/stable/cm-13.0-ZNH5Y, and get the flashable zip.
I made a few tries and i can't do it, i going to tell you my problems and how i could fix some of them.
Error 1:
when i try to compile i get this error:
scripts/Makefile.build:455: recipe for target 'drivers/video/msm' failed
make[2]: *** [drivers/video/msm] Error 2
scripts/Makefile.build:455: recipe for target 'drivers/video' failed
make[1]: *** [drivers/video] Error 2
make[1]: *** Waiting for unfinished jobs....
I solved it changing a line in /home/user/Desktop/android_kernel_xiaomi_msm8956-stable-cm-13.0-ZNH5Y/drivers/video/msm/msm_dba/msm_dba.c
I changed #include <msm_dba_internal.h> for rhis #include "msm_dba_internal.h"
After that i get another error.
Error 2:
After solve Error 1, when i try to compile i get this error:
make[1]: *** No rule to make target 'arch/arm64/boot/dts/msm8956-mtp.dtb', needed by 'arch/arm64/boot/Image.gz-dtb'. Stop.
make[1]: *** Waiting for unfinished jobs....
OBJCOPY arch/arm64/boot/Image
/home/guille/Desktop/android_kernel_xiaomi_msm8956-stable-cm-13.0-ZNH5Y/arch/arm64/Makefile:84: recipe for target 'Image.gz-dtb' failed
make: *** [Image.gz-dtb] Error 2
make: *** Waiting for unfinished jobs....
This error i solved disabling this line #CONFIG_BUILD_ARM64_APPENDED_DTB_IMAGE=y in cyanogenmod_kenzo_defconfig, but i don't know if this is the correct way.
After that changes i get finally the image (used in the tutorial) and image.gz, then i proced to put the image and wlan.ko in in kernel.zip, but when i flash it the phone don't boot.
What can i do?
P.S.: Sorry my bad english.

Hello the friend really super guide and especially the only one or with whom I managed to compile my own kernel.
Is especially as said in the OP I contact a lot of kernel dev and nobody answered so I will have only one person to thank lol.

omega691 said:
Hello, i'm trying to compile this kernel (for xiaomi redmi note 3 "kenzo") https://github.com/cyanogenmod/android_kernel_xiaomi_msm8956/tree/stable/cm-13.0-ZNH5Y, and get the flashable zip.
I made a few tries and i can't do it, i going to tell you my problems and how i could fix some of them.
Error 1:
when i try to compile i get this error:
scripts/Makefile.build:455: recipe for target 'drivers/video/msm' failed
make[2]: *** [drivers/video/msm] Error 2
scripts/Makefile.build:455: recipe for target 'drivers/video' failed
make[1]: *** [drivers/video] Error 2
make[1]: *** Waiting for unfinished jobs....
I solved it changing a line in /home/user/Desktop/android_kernel_xiaomi_msm8956-stable-cm-13.0-ZNH5Y/drivers/video/msm/msm_dba/msm_dba.c
I changed #include <msm_dba_internal.h> for rhis #include "msm_dba_internal.h"
After that i get another error.
Error 2:
After solve Error 1, when i try to compile i get this error:
make[1]: *** No rule to make target 'arch/arm64/boot/dts/msm8956-mtp.dtb', needed by 'arch/arm64/boot/Image.gz-dtb'. Stop.
make[1]: *** Waiting for unfinished jobs....
OBJCOPY arch/arm64/boot/Image
/home/guille/Desktop/android_kernel_xiaomi_msm8956-stable-cm-13.0-ZNH5Y/arch/arm64/Makefile:84: recipe for target 'Image.gz-dtb' failed
make: *** [Image.gz-dtb] Error 2
make: *** Waiting for unfinished jobs....
This error i solved disabling this line #CONFIG_BUILD_ARM64_APPENDED_DTB_IMAGE=y in cyanogenmod_kenzo_defconfig, but i don't know if this is the correct way.
After that changes i get finally the image (used in the tutorial) and image.gz, then i proced to put the image and wlan.ko in in kernel.zip, but when i flash it the phone don't boot.
What can i do?
P.S.: Sorry my bad english.
Click to expand...
Click to collapse
Change directory and try again
Sent from my Redmi 3S using Tapatalk

i have this error:
sound/soc/msm/msm8996.c:34:26: fatal error: device_event.h: No such file or directory
#include <device_event.h>
^
compilation terminated.
i'm on ubuntu 16.04.02 x64
i think the problem is the library "libevent-dev" but i don't understand how to fix it because libevent-dev is installed

problem in yureka
i rooted my phone long back.. but i didnt used it...lots of problems in it it is in boot loop amd when ever it is luckily on wifi is not working ...it is not even displaying near by wifi and not even data connection ,i thought of new cm12 rom and flashed it stiill same issue. and more over after flashing stock cm12 and it is still in boot loop..please help

Hello there,
i am having this said problem when i follow your tutorial on how to build a 64bit kernel.
Code:
In file included from include/linux/compiler.h:54:0,
from include/uapi/linux/stddef.h:1,
from include/linux/stddef.h:4,
from /home/protox/android/berlin_kernel/include/uapi/linux/posix_types.h:4,
from include/uapi/linux/types.h:13,
from include/linux/types.h:5,
from include/linux/mod_devicetable.h:11,
from scripts/mod/devicetable-offsets.c:2:
include/linux/compiler-gcc.h:106:30: fatal error: linux/compiler-gcc7.h: No such file or directory
#include gcc_header(__GNUC__)
^
compilation terminated.
/home/protox/android/berlin_kernel/scripts/mod/Makefile:34: recipe for target 'scripts/mod/devicetable-offsets.s' failed
make[2]: *** [scripts/mod/devicetable-offsets.s] Error 1
scripts/Makefile.build:468: recipe for target 'scripts/mod' failed
make[1]: *** [scripts/mod] Error 2
make[1]: *** Waiting for unfinished jobs....
HOSTCC scripts/dtc/livetree.o
HOSTCC scripts/dtc/srcpos.o
HOSTCC scripts/dtc/treesource.o
HOSTCC scripts/dtc/util.o
HOSTCC scripts/dtc/dtc-lexer.lex.o
HOSTCC scripts/dtc/dtc-parser.tab.o
HOSTLD scripts/dtc/dtc
Makefile:559: recipe for target 'scripts' failed
make: *** [scripts] Error 2
make: *** Waiting for unfinished jobs....
Can you please help me out mate
Thanks

hello sir can you help me please??
my device is redmi note 4x ( mido ) snapdragon 625 64 bit i build kernel without error but when i want to flash it on my device
device not boot to system but to fastboot mod and need to flash other kernel to make it boot ?? any idea about that ?

Compiling kernrl
I need some help if any body is out there .after months of trying and trying i am finally able to compli my kernel .after is completes with no error i go to arch/arm64/boot and all i have is am image.gz and and image no ziamge or nothing ive goigle it but i cant figure out whats the next step

akino553 said:
hello sir can you help me please??
my device is redmi note 4x ( mido ) snapdragon 625 64 bit i build kernel without error but when i want to flash it on my device
device not boot to system but to fastboot mod and need to flash other kernel to make it boot ?? any idea about that ?
Click to expand...
Click to collapse
The kernel has not compiled properly...

fowler82 said:
I need some help if any body is out there .after months of trying and trying i am finally able to compli my kernel .after is completes with no error i go to arch/arm64/boot and all i have is am image.gz and and image no ziamge or nothing ive goigle it but i cant figure out whats the next step
Click to expand...
Click to collapse
Find a zip with the image.gz and image file and replace the files with ur compiled files.

Rohan459 said:
Find a zip with the image.gz and image file and replace the files with ur compiled files.
Click to expand...
Click to collapse
Once I build the kernel and I build the modules how do i find them to load them does anybody no

Toolchains

fowler82 said:
Once I build the kernel and I build the modules how do i find them to load them does anybody no
Click to expand...
Click to collapse
go in kernel root directory and within search box look for .ko files. It will give you a list of modules from where you can copy them and paste in your new ROM system/lib/modules directory.

can any device use the kernel.zip to flash the boot.img after replacing wlan.ko ?

Rohan459 said:
This is My first post on XDA
From the day I owned YUreka I always wished to compile my own kernel. I searched on the web for compiling 64bit android kernel but didn't get satisfying results. So I did some research and asked some android developers, I got help from some developers but some of the developer refused may be due to their attitude or may be they didn't want to share their ideas / knowledge. Anyways here's a guide for compiling 64 bit kernel. I have also made a video tutorial check that out [ status == uploaded ].
What will YU need :
1. Ubuntu 64 Bit OS
2. Good Internet Connection.
3. Usable Brain.
4. Basic Knowledge of Linux.
Lets Start
First we need to get some important stuff / tools / software .
1. Open Ubuntu Software center and install JDK 7 or JDK 8
2. Open terminal and run the following command
Code:
sudo apt-get install libncurses5-dev
Code:
sudo apt-get install git-core gnupg flex bison gperf build-essential zip curl libc6-dev libncurses5-dev:i386 x11proto-core-dev libx11-dev:i386 libreadline6-dev:i386 libgl1-mesa-glx:i386 libgl1-mesa-dev g++-multilib tofrodos python-markdown libxml2-utils xsltproc zlib1g-dev:i386
Code:
sudo ln -s /usr/lib/i386-linux-gnu/mesa/libGL.so.1 /usr/lib/i386-linux-gnu/libGL.so
Code:
sudo apt-get install -y ccache &&echo 'export PATH="/usr/lib/ccache:$PATH"' | tee -a ~/.bashrc &&source ~/.bashrc && echo $PATH
Code:
export USE_CCACHE=1
Code:
mkdir ~/bin
Code:
export PATH=~/bin:$PATH
Code:
curl https://dl-ssl.google.com/dl/googlesource/git-repo/repo > ~/bin/repo
Code:
chmod a+x ~/bin/repo
Now YU'r Linux machine is all set to compile kernel.
3. Now YU need to download a toolchain. I have uploaded the toolchain that i used for compiling the kernel. Click from here > h t t p s ://drive.google.com/open?id=0B9D4jOdpRzZHOURMTS1VaXplc0U
4. Time to download Kernel sources. For this tutorial I am using Varun Chitre's Thunderzap kernel. Here is the link for thunderzap's sources > h t t p s ://github.com/varunchitre15/thunderzap_tomato
.Select branch as cm 12.1 from left and press download on the right.
5. Make a directory "android-kernel" under "/Home" and place both the zips in "android-kernel" directory.
6. Extract both the zips. Now YU will have two folders one of toolchain and other of kernel source.
7. YU no more need the zip files just delete both the zips.
8. Open the kernel source folder and type the following code.
9. Run the following command to point the variable to toolchains path :
Code:
export CROSS_COMPILE=/home/r0h4n/android-kernel/aarch64-linux-android-4.9-uber-master/bin/aarch64-linux-android-
If YU followed along with me YU will just have to change the name of the user ( replace <r0h4n> with <YU'r username> )
10. Time to Compile your kernel :
Code:
export ARCH=arm64
Code:
export SUBARCH=arm64
Code:
export USE_CCACHE=1
Code:
make cyanogenmod_tomato-64_defconfig
The name of defconfig file may be different check it in "kernel_source/arch/arm64/defconfig/"
Code:
make menuconfig
Here YU can explore various options. I'll not explain everything in detail here.
Now the final command make. It takes a parameter -jn. Where ( n = # of threads per core + 1 )
I have a Dual core processor with 2 thread per processor so for me it is " make -j3 ".
Code:
make -j3
Now sit back and relax.......let the kernel compile
Got a compilation error ?
Post it here.
Now we need to create a flashable zip. Download this kernel flash zip from here > h t t p s : //drive.google.com/open?id=0B9D4jOdpRzZHdTJibndqQzhVdFk
1. Extract kernel.zip.
2. Navigate to tools in "/kernel".
3. Open "kernel_source/arch/arm64/boot/".
4. Copy "Image".
5. Replace it with the "Image" in "/kernel/tools/Image".
6. Copy "kernel_source/driver/stagging/prima/wlan.ko" and replace it with "kernel/system/lib/modules/wlan.ko".
7. Goto "/kernel" select all the three folders "META-INF", "system", "tools" and rezip it.
8. Flash the zip via recovery and now YU'r Phone rocks YU'r own compile kernel.
Click to expand...
Click to collapse
created kernel using tutorial,,,but this kernel boots in fastboot mode only..
dont know why..
device is lenovo k6 note(sd430 msm8937)
please help

i am facing this error and can not resolve the problem.
property '#gpio-cells' in node /soc/msm_cdc_pinctrl_us_euro_sw or bad phandle (referred from /soc/sound:qcom,cdc-us-eu-gpios[0])
arch/arm64/boot/dts/qcom/msm8953-pmi8937.dtb: Warning (gpios_property): Missing property '#gpio-cells' in node /soc/cdc_comp_pinctrl or bad phandle (referred from /soc/sound:qcom,cdc-comp-gpios[0])
arch/arm64/boot/dts/qcom/msm8953-pmi8937.dtb: Warning (gpios_property): Missing property '#gpio-cells' in node /soc/msm_cdc_pinctrl_pri or bad phandle (referred from /soc/sound:qcom,pri-mi2s-gpios[0])
arch/arm64/boot/dts/qcom/msm8953-pmi8937.dtb: Warning (gpios_property): Missing property '#gpio-cells' in node /soc/msm_cdc_pinctrl_quin or bad phandle (referred from /soc/sound:qcom,quin-mi2s-gpios[0])
arch/arm64/boot/dts/qcom/msm8953-pmi8937.dtb: Warning (gpios_property): Missing property '#gpio-cells' in node /soc/msm_cdc_pinctrl_us_euro_sw or bad phandle (referred from /soc/sound-9335:qcom,cdc-us-eu-gpios[0])
arch/arm64/boot/dts/qcom/msm8953-pmi8937.dtb: Warning (gpios_property): Missing property '#gpio-cells' in node /soc/msm_cdc_pinctrl_quin or bad phandle (referred from /soc/sound-9335:qcom,quin-mi2s-gpios[0])
arch/arm64/boot/dts/qcom/msm8953-pmi8937.dtb: Warning (interrupts_property): interrupts size is (12), expected multiple of 8 in /soc/[email protected]
CC lib/mpi/generic_mpih-lshift.o
DTC arch/arm64/boot/dts/qcom/msm8953-ext-codec-rcm-overlay.dtbo
Error: ../arch/arm64/boot/dts/qcom/msm8953-audio-cdp.dtsi:14.1-11 syntax error
FATAL ERROR: Unable to parse input tree
scripts/Makefile.dtbo:24: recipe for target 'arch/arm64/boot/dts/qcom/msm8953-ext-codec-rcm-overlay.dtbo' failed
make[3]: *** [arch/arm64/boot/dts/qcom/msm8953-ext-codec-rcm-overlay.dtbo] Error 1
../scripts/Makefile.build:653: recipe for target 'arch/arm64/boot/dts/qcom' failed
make[2]: *** [arch/arm64/boot/dts/qcom] Error 2
arch/arm64/Makefile:194: recipe for target 'dtbs' failed
make[1]: *** [dtbs] Error 2
make[1]: *** Waiting for unfinished jobs..

OmniROM 6.0 build error for Pixel C

General information:
1. I can't found the kernel source from android.com and android source repos.
2. I was setup build environment for OmniROM, and I was tested build manta with success.
3. I was config the device repo in .repo/local_manifests/default.xml with https://android.googlesource.com/device/google/dragon/ and https://android.googlesource.com/device/google/dragon-kernel/
4. Changed all aosp_dragon to omni_dragon, add TWRP config to BoardConfig.mk, add TARGET_PREBUILT_KERNEL := device/google/dragon-kernel/Image.fit to device.mk
5. Download and extract vendor file from https://developers.google.com/android/nexus/drivers#dragon using MXC14G version.
6. Modified tools/roomservice.py for disabled check dragon online.(Make it compile)
My build step:
cmd:
cd /media/dev/source/OmniROM/
brunch dragon
Wait for complete, it report error:
Code:
Export includes file: external/tinycompress/Android.mk -- /media/dev/source/OmniROM/out/target/product/dragon/obj_arm/SHARED_LIBRARIES/libtinycompress_intermediates/export_includes
make: *** No rule to make target '/media/dev/source/OmniROM/out/target/product/dragon/obj/KERNEL_OBJ/usr', needed by '/media/dev/source/OmniROM/out/target/product/dragon/obj_arm/SHARED_LIBRARIES/libtinycompress_intermediates/compress.o'
The full log in http://pastebin.com/drM6Fe2R
I tried build the external/tinycompress package only, it return error.
cmd:
mm external/tinycompress
Report error:
Code:
No private recovery resources for TARGET_DEVICE dragon
build/core/tasks/kernel.mk:104: ***************************************************************
build/core/tasks/kernel.mk:105: * Using prebuilt kernel binary instead of source *
build/core/tasks/kernel.mk:106: * THIS IS DEPRECATED, AND WILL BE DISCONTINUED *
build/core/tasks/kernel.mk:107: * Please configure your device to download the kernel *
build/core/tasks/kernel.mk:108: * source repository to kernel/google/dragon
build/core/tasks/kernel.mk:109: * See http://forum.xda-developers.com/wiki/ROM/Integrated_Kernel_Build
build/core/tasks/kernel.mk:110: * for more information *
build/core/tasks/kernel.mk:111: ***************************************************************
build/core/tasks/kernel.mk:271: warning: overriding recipe for target '/media/dev/source/OmniROM/out/target/product/dragon/kernel'
build/core/Makefile:72: warning: ignoring old recipe for target '/media/dev/source/OmniROM/out/target/product/dragon/kernel'
make: Nothing to be done for 'external/tinycompress'.
The full log in http://pastebin.com/DaHjPmHk
Can't you help me fix this build erro?

kendling said:
General information:
1. I can't found the kernel source from android.com and android source repos.
2. I was setup build environment for OmniROM, and I was tested build manta with success.
3. I was config the device repo in .repo/local_manifests/default.xml with https://android.googlesource.com/device/google/dragon/ and https://android.googlesource.com/device/google/dragon-kernel/
4. Changed all aosp_dragon to omni_dragon, add TWRP config to BoardConfig.mk, add TARGET_PREBUILT_KERNEL := device/google/dragon-kernel/Image.fit to device.mk
5. Download and extract vendor file from https://developers.google.com/android/nexus/drivers#dragon using MXC14G version.
6. Modified tools/roomservice.py for disabled check dragon online.(Make it compile)
My build step:
cmd:
cd /media/dev/source/OmniROM/
brunch dragon
Wait for complete, it report error:
Code:
Export includes file: external/tinycompress/Android.mk -- /media/dev/source/OmniROM/out/target/product/dragon/obj_arm/SHARED_LIBRARIES/libtinycompress_intermediates/export_includes
make: *** No rule to make target '/media/dev/source/OmniROM/out/target/product/dragon/obj/KERNEL_OBJ/usr', needed by '/media/dev/source/OmniROM/out/target/product/dragon/obj_arm/SHARED_LIBRARIES/libtinycompress_intermediates/compress.o'
The full log in http://pastebin.com/drM6Fe2R
I tried build the external/tinycompress package only, it return error.
cmd:
mm external/tinycompress
Report error:
Code:
No private recovery resources for TARGET_DEVICE dragon
build/core/tasks/kernel.mk:104: ***************************************************************
build/core/tasks/kernel.mk:105: * Using prebuilt kernel binary instead of source *
build/core/tasks/kernel.mk:106: * THIS IS DEPRECATED, AND WILL BE DISCONTINUED *
build/core/tasks/kernel.mk:107: * Please configure your device to download the kernel *
build/core/tasks/kernel.mk:108: * source repository to kernel/google/dragon
build/core/tasks/kernel.mk:109: * See http://forum.xda-developers.com/wiki/ROM/Integrated_Kernel_Build
build/core/tasks/kernel.mk:110: * for more information *
build/core/tasks/kernel.mk:111: ***************************************************************
build/core/tasks/kernel.mk:271: warning: overriding recipe for target '/media/dev/source/OmniROM/out/target/product/dragon/kernel'
build/core/Makefile:72: warning: ignoring old recipe for target '/media/dev/source/OmniROM/out/target/product/dragon/kernel'
make: Nothing to be done for 'external/tinycompress'.
The full log in http://pastebin.com/DaHjPmHk
Can't you help me fix this build erro?
Click to expand...
Click to collapse
I'd look at one of the other Nexus device trees to see how they set up inline kernel build and properly Omni-fied it. I haven't done it in such a long time I don't really remember the exact details.

anyone can help me ?
Code:
OBJCOPY arch/arm/boot/zImage
Kernel: arch/arm/boot/zImage is ready
make[1]: Leaving directory `/home/ibrahim/wave/kernel/samsung/aries'
make -C kernel/samsung/aries O=/home/ibrahim/wave/out/target/product/wave/obj/KERNEL_OBJ ARCH=arm CROSS_COMPILE=" "/home/ibrahim/wave/prebuilts/gcc/linux-x86/arm/arm-eabi-4.8/bin/"/arm-eabi-" dtbs
make[1]: Entering directory `/home/ibrahim/wave/kernel/samsung/aries'
make[2]: *** No rule to make target `dtbs'. Stop.
make[1]: *** [sub-make] Error 2
make[1]: Leaving directory `/home/ibrahim/wave/kernel/samsung/aries'
make: [TARGET_KERNEL_BINARIES] Error 2 (ignored)
make -C kernel/samsung/aries O=/home/ibrahim/wave/out/target/product/wave/obj/KERNEL_OBJ ARCH=arm CROSS_COMPILE=" "/home/ibrahim/wave/prebuilts/gcc/linux-x86/arm/arm-eabi-4.8/bin/"/arm-eabi-" modules
make[1]: Entering directory `/home/ibrahim/wave/kernel/samsung/aries'
CHK include/linux/version.h

I did found the problem!!
Because I did add the lines to aosp_dragon.mk below:
Code:
# Inherit from our custom product configuration
$(call inherit-product, vendor/omni/config/common_tablet.mk)
After that, I got new errors:
1. Failed to compile mkbootimg.c
Code:
target C: utility_mkbootimg <= system/core/mkbootimg/mkbootimg.c
system/core/mkbootimg/mkbootimg.c: In function 'print_id':
system/core/mkbootimg/mkbootimg.c:82:5: error: 'for' loop initial declarations are only allowed in C99 or C11 mode
for (unsigned i = 0; i < id_len; i++) {
^
system/core/mkbootimg/mkbootimg.c:82:5: note: use option -std=c99, -std=gnu99, -std=c11 or -std=gnu11 to compile your code
build/core/binary.mk:801: recipe for target '/media/dev/source/OmniROM/out/target/product/dragon/obj/UTILITY_EXECUTABLES/utility_mkbootimg_intermediates/mkbootimg.o' failed
make: *** [/media/dev/source/OmniROM/out/target/product/dragon/obj/UTILITY_EXECUTABLES/utility_mkbootimg_intermediates/mkbootimg.o] Error 1
make: *** 正在等待未完成的任务....
2. Failed to compile compress.c
Code:
target thumb C: audio.usb.default_32 <= hardware/libhardware/modules/usbaudio/audio_hal.c
In file included from bionic/libc/include/signal.h:32:0,
from bionic/libc/include/sys/select.h:33,
from bionic/libc/include/unistd.h:35,
from external/tinycompress/compress.c:61:
/media/dev/source/OmniROM/out/target/product/dragon/obj/KERNEL_OBJ/usr/include/asm/sigcontext.h:53:2: error: unknown type name '__uint128_t'
__uint128_t vregs[32];
^
build/core/binary.mk:801: recipe for target '/media/dev/source/OmniROM/out/target/product/dragon/obj_arm/SHARED_LIBRARIES/libtinycompress_intermediates/compress.o' failed
make: *** [/media/dev/source/OmniROM/out/target/product/dragon/obj_arm/SHARED_LIBRARIES/libtinycompress_intermediates/compress.o] Error 1
make: *** 正在等待未完成的任务....
make: *** wait: 没有子进程。 停止。
Anyone can help me?

About __uint128_t problem, do this:
https://github.com/omnirom/android_...mmit/80349b926351ca5992973e4a0357ca649a602faa

Blue59 said:
anyone can help me ?
Code:
OBJCOPY arch/arm/boot/zImage
Kernel: arch/arm/boot/zImage is ready
make[1]: Leaving directory `/home/ibrahim/wave/kernel/samsung/aries'
make -C kernel/samsung/aries O=/home/ibrahim/wave/out/target/product/wave/obj/KERNEL_OBJ ARCH=arm CROSS_COMPILE=" "/home/ibrahim/wave/prebuilts/gcc/linux-x86/arm/arm-eabi-4.8/bin/"/arm-eabi-" dtbs
make[1]: Entering directory `/home/ibrahim/wave/kernel/samsung/aries'
make[2]: *** No rule to make target `dtbs'. Stop.
make[1]: *** [sub-make] Error 2
make[1]: Leaving directory `/home/ibrahim/wave/kernel/samsung/aries'
make: [TARGET_KERNEL_BINARIES] Error 2 (ignored)
make -C kernel/samsung/aries O=/home/ibrahim/wave/out/target/product/wave/obj/KERNEL_OBJ ARCH=arm CROSS_COMPILE=" "/home/ibrahim/wave/prebuilts/gcc/linux-x86/arm/arm-eabi-4.8/bin/"/arm-eabi-" modules
make[1]: Entering directory `/home/ibrahim/wave/kernel/samsung/aries'
CHK include/linux/version.h
Click to expand...
Click to collapse
@Blue59
make[2]: *** No rule to make target `dtbs'.
Click to expand...
Click to collapse
The problem is , your kernel's Makefile not have dtbs make rule.
See https://github.com/kendling/android_kernel_google_dragon/blob/m/arch/arm64/Makefile
dtbs: prepare scripts
$(Q)$(MAKE) $(build)=$(boot)/dts
dtbs_install:
$(Q)$(MAKE) $(dtbinst)=$(boot)/dts
Click to expand...
Click to collapse

Hi everybody,
I was fixed all problem and build success.
After build success, the boot.img can't bootup.
Tablet display "OS on your tablet is damaged. Need recovery."
Yes, I fixed it too.
Now my build was all success and success bootup.
I want to release the ROM later.
Thanks all!

Request permissive Custom kernal for a9 pro (sm-a910f)

Hi, I am so sorry to post such a request here. I dont use Linux otherwise I would try to make one myself. I just went to opensource.samsung.com, I saw plenty of source code available for a9 pro sm-a910f. So I wonder if someone could help to compile a custome keenel with permissive mode enable?
Thank you very much!

imhercules said:
Hi, I am so sorry to post such a request here. I dont use Linux otherwise I would try to make one myself. I just went to opensource.samsung.com, I saw plenty of source code available for a9 pro sm-a910f. So I wonder if someone could help to compile a custome keenel with permissive mode enable?
Thank you very much!
Click to expand...
Click to collapse
Ok. I did try to compile the kernel but it turned out introduce error. Could anyone please take a look at what's going on?
Firstly, Samsung a9 Pro is a ARM64 device.
I tried to compile permissive kernel by referencing from this two guide.
A Noob Guide On Building Your Own Custom Kernel on WIN10 (ARM & ARM64 & MTK)
https://forum.xda-developers.com/android/software/guide-noob-guide-building-custom-kernel-t3775494
Compiling a permissive Android kernel
http://graemehill.ca/compiling-permissive-android-kernel/
So here's what I did.
1. Install Ubuntu in Windows 10
Setting up environment
2. apt-get update
3. sudo apt-get install -y build-essential kernel-package libncurses5-dev bzip2
4. a) Download ndk from https://developer.android.com/ndk/downloads (I downloaded Linux 64-bit (x86) version android-ndk-r10e-linux-x86_64)
b) Extract the content to home/android/ folder
5. a) Download a9 pro source code from http://opensource.samsung.com/reception.do
b) Extract Kernel.tar.gz to home/android folder
6. a) Open up ~/android/kernel/security/selinux/Makefile with notepad
b) change EXTRA_CFLAGS += -DCONFIG_ALWAYS_ENFORCE from true to false
EXTRA_CFLAGS += -DCONFIG_ALWAYS_ENFORCE=false
7. RUN export CROSS_COMPILE=~/home/hercules/android/ndk/toolchains/aarch64-linux-android-4.9/prebuilt/linux-x86_64/bin/aarch64-linux-android-
8. cd ~/android/Kernel
9. make clean && make mrproper
then introduces below error
scripts/Makefile.clean:17: /home/hercules/android/Kernel/drivers/gud/TlcTui/Makefile: No such file or directory
make[3]: *** No rule to make target '/home/hercules/android/Kernel/drivers/gud/TlcTui/Makefile'. Stop.
scripts/Makefile.clean:94: recipe for target 'drivers/gud/TlcTui' failed
make[2]: *** [drivers/gud/TlcTui] Error 2
scripts/Makefile.clean:94: recipe for target 'drivers/gud' failed
make[1]: *** [drivers/gud] Error 2
Makefile:1074: recipe for target '_clean_drivers' failed
make: *** [_clean_drivers] Error 2
9. make ARCH=arm64 msm8976_sec_a9xprolte_sea_defconfig it introduces below error
drivers/battery_v2/Kconfig:75:warning: type of 'SAMSUNG_BATTERY_ENG_TEST' redefined from 'boolean' to 'tristate'
arch/arm64/configs/msm8976_sec_a9xprolte_sea_defconfig:78:warning: override: reassigning to symbol AFC_CHARGER_MODE
KCONFIG_SELINUX((null))
KCONFIG_LOG_SELINUX((null))
KCONFIG_TIMA((null))
KCONFIG_DMVERITY((null))
KCONFIG_VARIANT((null))
***
*** You must specify VARIANT_DEFCONFIG !
***
/home/hercules/android/Kernel/scripts/kconfig/Makefile:129: recipe for target 'msm8976_sec_a9xprolte_sea_defconfig' failed
make[1]: *** [msm8976_sec_a9xprolte_sea_defconfig] Error 1
Makefile:510: recipe for target 'msm8976_sec_a9xprolte_sea_defconfig' failed
make: *** [msm8976_sec_a9xprolte_sea_defconfig] Error 2
I don't know what to do now. If the solution is simple enough than I could try. If not I got to giv up.

Will be making one. Pls let me know if it works.