My Lenovo A3000 was working fine till it got infected with some viruses. I tried many apps like CM Security, Avast , Malware Byte but it did not help. So, I did Factory Reset. But after that I found that Google Play Store is not working. It gives a error massage "could not be downloaded due to an error 491". So, I again did Wipe data/ Factory Reset(pressing Vol up + Power button, U know how to do that I do not know the technical term). This time I get new problems like "unfortunately gapps has stopped working" and "android keyboard has stopped working aosp". So I decided to flash stock rom which i found in another post of XDA . But when I tried to install the driver to flash the rom i got another problem which was my computer did not detect my device I mean it was supposed to show a device like MTKxxx in device manager but it did not. When I switch on the Tablet and connected it to pc get another problem like "MTP USB Device Failed". So. it will be very much help if anyone can help me with anything. Thank you.
Related
Hello everyone,
I registered and post this thread because i give up with problem i get after upgrade my galaxy s4 i9505 to jelly bean 4.3. Pc dont recognizing phone, usb cable is good because when i connecting the charging icon appears. I checked in other pc (in both there is windows 7), I download the last version of usb drivers from official site, i download the last version of Kies3 and it still no connecting. Before upgrade i havent this issue, i also checked other usb cable (both cables are original). I searching for hour any solution, activate developer options and check "usb debugging", also i wrote *#0808# and check mtp (i also tried other options, no result) or I tried launch vol down + power + home, also dont help. So i give up and now i`m hope some hi-tech wizard will tell where i making mistake...
After hours spending on wasting time with this usb connect i started to think about change soft, but here appears another issue... I havent root, and superuser. That is not a finish of trouble! I noticed that i have recovery 3e with some kind of error "e: signature verification failure" when i trying to flash any other soft or custom recovery! I searching for some tips on web, but in all options i allways impended whatever i try: when i try use Rom Manager there is error i havent su, when i try activate SuperSu there is error i havent root, when i try install CWM by MobileOdin there is error i am not su... when i try other aps like Framaroot there is error #5, also in Rom Manager i have info that my Rom doesnt support OTA, when i try change recovery file in System/bin folder by RootExplorer there is again error "u havent root"! I'll go crazy by this trap!
Anyone have any ideas? Please help me :crying:
PS. English is not my strong side. Sorry.
Dude-K said:
Hello everyone,
I registered and post this thread because i give up with problem i get after upgrade my galaxy s4 i9505 to jelly bean 4.3. Pc dont recognizing phone, usb cable is good because when i connecting the charging icon appears. I checked in other pc (in both there is windows 7), I download the last version of usb drivers from official site, i download the last version of Kies3 and it still no connecting. Before upgrade i havent this issue, i also checked other usb cable (both cables are original). I searching for hour any solution, activate developer options and check "usb debugging", also i wrote *#0808# and check mtp (i also tried other options, no result) or I tried launch vol down + power + home, also dont help. So i give up and now i`m hope some hi-tech wizard will tell where i making mistake...
After hours spending on wasting time with this usb connect i started to think about change soft, but here appears another issue... I havent root, and superuser. That is not a finish of trouble! I noticed that i have recovery 3e with some kind of error "e: signature verification failure" when i trying to flash any other soft or custom recovery! I searching for some tips on web, but in all options i allways impended whatever i try: when i try use Rom Manager there is error i havent su, when i try activate SuperSu there is error i havent root, when i try install CWM by MobileOdin there is error i am not su... when i try other aps like Framaroot there is error #5, also in Rom Manager i have info that my Rom doesnt support OTA, when i try change recovery file in System/bin folder by RootExplorer there is again error "u havent root"! I'll go crazy by this trap!
Anyone have any ideas? Please help me :crying:
PS. English is not my strong side. Sorry.
Click to expand...
Click to collapse
Well, you're in the wrong device forum.
Sent from my Nexus 7 using Tapatalk
Dude-K said:
Hello everyone,
I registered and post this thread because i give up with problem i get after upgrade my galaxy s4 i9505 to jelly bean 4.3. Pc dont recognizing phone, usb cable is good because when i connecting the charging icon appears. I checked in other pc (in both there is windows 7), I download the last version of usb drivers from official site, i download the last version of Kies3 and it still no connecting. Before upgrade i havent this issue, i also checked other usb cable (both cables are original). I searching for hour any solution, activate developer options and check "usb debugging", also i wrote *#0808# and check mtp (i also tried other options, no result) or I tried launch vol down + power + home, also dont help. So i give up and now i`m hope some hi-tech wizard will tell where i making mistake...
After hours spending on wasting time with this usb connect i started to think about change soft, but here appears another issue... I havent root, and superuser. That is not a finish of trouble! I noticed that i have recovery 3e with some kind of error "e: signature verification failure" when i trying to flash any other soft or custom recovery! I searching for some tips on web, but in all options i allways impended whatever i try: when i try use Rom Manager there is error i havent su, when i try activate SuperSu there is error i havent root, when i try install CWM by MobileOdin there is error i am not su... when i try other aps like Framaroot there is error #5, also in Rom Manager i have info that my Rom doesnt support OTA, when i try change recovery file in System/bin folder by RootExplorer there is again error "u havent root"! I'll go crazy by this trap!
Anyone have any ideas? Please help me :crying:
PS. English is not my strong side. Sorry.
Click to expand...
Click to collapse
wrong forum mate,
go here
http://forum.xda-developers.com/galaxy-s4
I had non rooted Kitkat 4.4.4 installed on N10. I received update intimation to Lollipop hence downloaded the update. While installing, message regarding error came followed with message "No command" . Now nothing is done further. Even tablet is not getting power off. Periodically screen displaying Google is coming followed with message "No command" I just checked. I can enter in to download and recovery. I now downloaded also Lollipop update for manual updating.
While connecting to PC, it starts searching for driver and after sometime message flashed "Driver not installed successfully" might be due to non detection of MTP. In such case if I try to maually install then ADB also is not recognising the connected device.
Can you suggest how best I can revive N10?
Regards,
Contnuing further, my main problen now is how to make my device visible in computer. I tried to install universal driver/ pda net driver etc. but no success. I feel unless this is done, I can not even use recovery options.
Kindly guide me. I keeps on wasting time on futile excercises.
Regards,
I got the same error last night - went straight for the wugs tool kit - problem is now solved
trriley5 said:
I got the same error last night - went straight for the wugs tool kit - problem is now solved
Click to expand...
Click to collapse
What did you do with the tool kit? Use it to install drivers or what? I've tried it and it does nothing for me except give suggestions on how to install drivers.
I've got ADB &SDK installed on my PC that works with my HTC One M8, so I imagine the drivers should work with my Nexus 10, don't you think?
Sent from my HTC6525LVW using XDA Free mobile app
I Have this problem also. I forgot that I had unlocked the Nexus 10, and let the OTA update install. It failed. I cannot get WUGs to talk to the tablet. If I let it boot I get "No Command"
If I go into Download Mode??? "Power + Sound Up" I get Start and an Robot laying down, says Downloading... but WUGs is never able to talk to it.
Atul Kaji said:
I had non rooted Kitkat 4.4.4 installed on N10. I received update intimation to Lollipop hence downloaded the update. While installing, message regarding error came followed with message "No command" . Now nothing is done further. Even tablet is not getting power off. Periodically screen displaying Google is coming followed with message "No command" I just checked. I can enter in to download and recovery. I now downloaded also Lollipop update for manual updating.
While connecting to PC, it starts searching for driver and after sometime message flashed "Driver not installed successfully" might be due to non detection of MTP. In such case if I try to maually install then ADB also is not recognising the connected device.
Can you suggest how best I can revive N10?
Regards,
Click to expand...
Click to collapse
please refer to my post from another thread regarding the fix for your nexus 10, I also encountered the same problem with you guys.. Below is the link. Thank you. :good:
http://forum.xda-developers.com/showpost.php?p=57001773&postcount=134
Thanks. Problem is solved now. Your guide is perfect.
Regards,
Hello people,
I did so many wrong decisions and I regret them all :/
Im gonna tell you all th details.
I got OnePlus2 phone and I rooted it.Then the GooglePlay didnt work and I tried to fix it with no success.
So today I decided to unroot my phone with a factory reset.With TWRP installed I deleted all memory from the phone.
I tryed to reboot it and a msg poped up saying "No os installed".
I looked up for ways to fix it with no success.I tryed to connect the device to my pc Windows10 and in device manger its shows up no problem just in the category "Marshall London Device" name "Google Nexus ADB Interface".
I think I bricked my phone.
How to fix my phone and get it back to the normal ?
thanks for the helpers
There are many threads in the general section that can help in situation like yours.
If you can boot into Twrp or Fastboot mode, then use the guides provided by @Spannaa at http://forum.xda-developers.com/oneplus-2/general/rom-mirrors-official-oxygen-os-roms-ota-t3209863
Alternatively you can use my thread to get back to stock the official OnePlus way at http://forum.xda-developers.com/oneplus-2/general/guide-official-stock-reset-to-oos-2-2-0-t3290707
I was trying to flash CM11 ROM in my Samsung Galaxy Ace GT-S5830, for that I have also installed CWM 6.0.5.3. While flashing ROM from recovery it failed with some error message, I tried it once again and again it stopped with the same error message. I decided to try some other ROM and kept mobile on side to search new rom, the mobile was still in recovery mode connected with usb for charging, after a minute as I saw at my mobile it was not in recovery mode, the screen was OFF. I tried to restart it again & again but failed, I even tried to start it in recovery mode but failed. Tried overnight charging, thinking that its battery is down, but failed to restart it. Then I searched about it on google, and came to know it was bricked with solution to flash it with stock rom using Odin, if it is still getting detected in PC. My PC is still detecting my mobile, tried flashing stock rom using Odin, but it is getting stuck at "< 1 >setup connection...". I don't know what to do now. My mobile is not in warranty, so no way in getting it repaired from service center. If anyone know any solution for this, then please tell me. I am eagerly waiting for your reply. Moderators, please don't delete this thread saying to go and search for same kind of threads, I have already done that & at last posted in new thread. Please Help me as soon as possible. Thanks..
http://download1187.mediafire.com/eew353b6p3sg/y2yja47mu5ew4g5/samsung+Galaxy-Ace+gt-s5830.rar
Extract it, open "S5830_Odin+Multi+Downloader+v4.38.exe" then in the OPS section select the .ops file in the extracted folder, then give a check on "One package" check box. Then on the bottom press the "One package" button and select the firmware in the folder and you're done !
P.S. If that doesn't work, try reinstalling Samsung USB Drivers, removing Kies, switching cables, ports or even PC's (if possible)
I think I have an unsolved problem. I know it doesn't exist, but it's very hard to find it.
I know it's not the Plus, but the Model is the Moto C XT1754 (NAMATH) Android 7.0 Nogaut - NRD90M.060
And there is no specific topic for it, but they are very similar and I thought I could post it here.
It's a very complicated problem, so I'll explain in detail what happened and why I had to come here to solve it.
(translated)
- STARTING:
I installed a TWRP through the app, without unlocking the Bootloader.
Whenever I turned it on, at boot still, the message appeared:
'red state
Your device has failed verification and may not work properly
Your device will boot in 5 seconds'
But it called normally.
I installed 'Magisk Manager 24.2' by zip and app afterwards.
I activated 'Zygisk' and in DenyList I activated/hidden from Google Play Services completely. All.
I restarted the smartphone and Sitema started having numerous errors. Most of the apps that I opened, closed with error, and other apps in the background too, mainly Google Play Services.
I tried to solve this but I couldn't because the smartphone was unusable.
I decided to format by TWRP.
But when I tried to restart the device, I always entered TWRP and continued that message in Boot ('Red State Your Device...')
I decided to reinstall Stockrom from Moto C XT1754.
When I tried to install Stockrom through flash_tool, I couldn't.
It always gives error.
'BROM ERROR : S_BROM_CMD_STARTCMD_FAIL (0x7D5)
[BROM] Can not pass bootrom start command! Possibly target power up too early.
[HINT}:'
or this one is the most common:
'BROM ERROR : ?? (0x1)
[HINT];'
I even tried installing a Custom Rom via Sdcard , 'Viper-namath-20171206-Coral-v3.1.1-UNOFFICIAL' with the GAPPs, etc.
I can install the ROM. (but the GAPPS gives an error at the end of the installation) 'open_gapps-arm64-7.1-micro-20220215'
But I think this case is because it is not installing the Custom ROM correctly. (Because of the Locked Bootloader? Maybe... I'm kind of a layman on the subject)
Because when I restart the device after installation it goes back to TWRP.
I can't get into Fastboot mode with the command by the buttons on the device, only by TWRP when I access 'Reboot>Bootloader'.
Reboot and go to fastboot (Black screen, down there written '=> FASTBOOT mode...'
I've already tried to recover/rescue the device by Motorola/Lenovo's 'Rescue and Smart Assistant'. But when I try to rescue it (with it connected to TWRP) it asks to accept the message to enable USB debugging.
But I don't have access to this window through TWRP.
Here comes the big question, why I am not able to solve my problem:
I think my 'USB Debugging' was off/disabled before I erased everything (formatted).
I'll try Stockrom's Flash through TWRP to see if it solves the problem, but I don't think it will.
I think the problem may be with the 'USB Cable' as well. He's old. I tested with a non-original USB cable that I had to see and I can't either, the errors persisted.
I plan on getting another original to test as well.
Just an observation.
My device is being recognized as 'USB MTP Device' (under 'Portable Devices')
If anyone can save me, I'd really appreciate it!
Thanks in advance for all the help! Every opinion matters!
And when I give the command 'ADB Devices' my device appears 'unauthorized'
'ZW3223CGWK unauthorized'