Related
I went back to stock so I can take my phone in for warranty issues. Now when I hold the home button and power button to boot into the recovery menu, I get a Picture of a phone and a triangle with a "!" in it. I cant remember if I could boot into recovery mode when my phone was stock. When I rooted it I flashed a new recovery image on to it (recovery heroc-RA-v1.2.3.img.) Do I have to re-root and flash the stock recovery image back on then unroot. (If so does some have a link to that file). Also I thought the RUU would take care of it, there is a recovery.img file in the folder I extracted to.
your going to have to reroot and flash the recovery image again. Check the stickys for a recovery image.
Check out the Pre-Kitchen on the front page for a quick way to root. Then reflash as the guy above says.
when you are running the stock RUU you do not have any recovery image loaded onto your phone ...you can however boot in to fastboot mode by holding down the vol button and power on the phone
Is there a file for the recovery image that came with the phone, I want to go back to completely stock so when I take it in they know nothing.
702DROID said:
when you are running the stock RUU you do not have any recovery image loaded onto your phone ...you can however boot in to fastboot mode by holding down the vol button and power on the phone
Click to expand...
Click to collapse
Thanks for you answer that is what I needed to know. So when a Sprint tech looks at it, they wont know that I rooted the phone. Currently I am running the stock Sprint 1.56 RUU
jdawg0024 said:
Thanks for you answer that is what I needed to know. So when a Sprint tech looks at it, they wont know that I rooted the phone. Currently I am running the stock Sprint 1.56 RUU
Click to expand...
Click to collapse
Correct. Even if they could tell, though, they wouldn't care.
jonnythan said:
Correct. Even if they could tell, though, they wouldn't care.
Click to expand...
Click to collapse
Unless hes not so bright like the rep I had. He argued with me about it. brought it to the manager who just put the stock software on and bring it back... The rep then flagged my account which i had rectified. whats funny is all teh while this guy has a unlocked flashed to windows 6.5 touch pro... What Hippocratic attempt
You know who you are Mr Rep. lol.Checkmate
It's kinda like taking in your minivan into Ford for warranty work, and then they discover that you have an aftermarket turbo on it. Or take in your modified 360 for warranty work for Microsoft. These devices have been modified from their original state to work in ways other than the original manufacture intended. Just flash back before you go in to cover your butt.
At my store, most reps have no idea what you would even be talking about if. All my techs know what to look for though, and will refuse work on any system running anything other than the Sprint ROM.
http://theunlockr.com/2009/10/03/how-to-unroot-the-htc-hero/
theres a link on this page to reinstall original out of box rom
video is kinda helpful
athlet1c said:
What Hippocratic attempt
Click to expand...
Click to collapse
You keep using that word. I do not think it means what you think it means.
jonnythan said:
You keep using that word. I do not think it means what you think it means.
Click to expand...
Click to collapse
The word is applied to accentuate that particular individuals persona..... ****Sense of humor required ****
athlet1c said:
The word is applied to accentuate that particular individuals persona..... ****Sense of humor required ****
Click to expand...
Click to collapse
lolz...I think you meant to use the word "hippocrite" instead of "Hippocratic" since that pertains to the Hippocratic Oath; It is something that new doctors say, purportedly written by Hippocrates (and hence the name), promising to practice medicine in an ethical manner with respect for every person and life so as to 'do no harm'. Sorry, I'm a med student so the misuse of Hippocratic was funny to me.
There is a stock recovery image that the phone comes with.
702DROID said:
when you are running the stock RUU you do not have any recovery image loaded onto your phone ...you can however boot in to fastboot mode by holding down the vol button and power on the phone
Click to expand...
Click to collapse
is the stock recovery image available?
Last time I unrooted my phone with ruu 1.29, it automatically restored it. It is very simple, without all the amon ra features. I have never tried with the new ruu 1.56 release. But I know it was there with 1.29, I have seen it. You get the triangle and exclamation point whenyou have no recovery. That happened to me when I botched the amon ra install. Did you Google Sprint recovery image cdma hero?
Hello all,
I think I may have bricked my nexus one. It is completely my fault for attempting things that I knew little about, so flame away But after the flaming, if anyone is willing to help I would be sooooo thankfull...
I successfully rooted my phone following the instructions on this page: (all links edited with a double asterisk as I don't believe I can post links)
h**p://theunlockr.com/2010/01/02/how-to-root-the-nexus-one/
Then successfully installed cyanogenmod (which is awesome!) following this page:
h**p://theunlockr.com/2010/01/08/how-to-load-a-custom-rom-on-the-nexus-one/
All was well, I even got the modaco desire rom up and running, and was happily switching back and forth using the recovery screen. I had nand backups for specific setups, etc.
Then I decided it would be good to know how to go back to stock, and found this page:
h**p://**w.androidspin.com/2010/05/06/guide-unrooting-your-nexus-one-its-like-it-never-happened-almost/
I followed the instructions to the letter (I think) except for erasing userdata (it said "failed: remote not allowed"). I thought that things would be ok, since I'd recently wiped, so I followed the page till the end.
The phone rebooted, and I got the original nexus boot animation - but it's in an endless loop! What's worse, it that now when I try to go to the bootloader or recovery mode, I get the exclamation triangle with the little android.
Is there any way through a command prompt (or other method) that I can fix this? I tried to re-flash the RA recovery image through the command prompt, but the response was, "waiting for device."
ANYTHING that anyone can suggest to help, I would be so thankful! I've been loving the nexus, and hate to think that I crippled it
Thanks in advance,
Randy
I doubt its bricked.
Noticed you didnt mention that fast boot doesnt work? (power button+trackball) try it.
Once you get to fastboot you can flash any ROM back. (fastboot flash **** commands from a command shell)
Did you ever perform a Nand Backup from Recovery?
It's not bricked, the only way to brick is to interrupt power when flashing a Radio image
Connect phone to PC. Open command prompt.
adb reboot recovery
Wipe, reflash.
So far, nobody has managed to brick a Nexus. There is no way as the fastboot mode can restore the whole phone and can't be messed with. Make sure you have the latest version of the SDK with correct USB drivers and fastboot. Then try and reflash the recovery image.
-------------------------------------
Sent from my Nexus One
nexus5894 said:
So far, nobody has managed to brick a Nexus. There is no way as the fastboot mode can restore the whole phone and can't be messed with. Make sure you have the latest version of the SDK with correct USB drivers and fastboot. Then try and reflash the recovery image.
-------------------------------------
Sent from my Nexus One
Click to expand...
Click to collapse
Actually...
http://forum.xda-developers.com/showpost.php?p=6320068&postcount=404
Paul22000 said:
Actually...
http://forum.xda-developers.com/showpost.php?p=6320068&postcount=404
Click to expand...
Click to collapse
............................
It worked!!!!!
It worked!!
britoso, thank you soooooo much! The only way that I knew to get into bootloader/recovery was via power button/volume down, but power/trackball brought up the bootloader screen, and I clicked on fastboot. I was able to flash the RA recover image through the command terminal via fastboot, then able to get into recovery. I had cyan and modaco sense on the sd, and was able to flash one of them on.
I never thought I'd be so happy to see "quietly brilliant"!!! I WILL buy you a beer, a case in fact as soon as money clears my paypal account.
I have learned my lesson, research research research. (I did do some, but not enough to feel comfortable with what I was doing - hence my cry for help!)
Other than the phone and OS itself, the thing I like most about the nexus is the fact that one CAN root, and then customize (sold a Telus moto droid because I could not do that very thing).
I digress... thanks again so much!
And Paul, thanks for your sense ROM; I've had HTC phones from the Touch to the the diamond to the Hero, and missed the UI!
Randy Malkoski said:
It worked!!
britoso, thank you soooooo much! The only way that I knew to get into bootloader/recovery was via power button/volume down, but power/trackball brought up the bootloader screen, and I clicked on fastboot. I was able to flash the RA recover image through the command terminal via fastboot, then able to get into recovery. I had cyan and modaco sense on the sd, and was able to flash one of them on.
I never thought I'd be so happy to see "quietly brilliant"!!! I WILL buy you a beer, a case in fact as soon as money clears my paypal account.
I have learned my lesson, research research research. (I did do some, but not enough to feel comfortable with what I was doing - hence my cry for help!)
Other than the phone and OS itself, the thing I like most about the nexus is the fact that one CAN root, and then customize (sold a Telus moto droid because I could not do that very thing).
I digress... thanks again so much!
And Paul, thanks for your sense ROM; I've had HTC phones from the Touch to the the diamond to the Hero, and missed the UI!
Click to expand...
Click to collapse
Glad to hear it. You learn the most by trial and error.
I think i got the same problem. i tried to Unlock Bootloader and Root Google Nexus One which was successful but then i tried to superboot it and when it came to the part where you "double click the ‘install-superboot-windows.bat’ file" i clicked it but it did not go to the nnext screen where the superboot completes it just stayed at the "bootloader screen". i must hve not done something or done something wrong i dont know.
So then i unplugged the phone from the pc and rebooted it. when it reeboted i wasnt getting any network, the phone was slow and the notification bar would not slide down...also i noticed the phone restarting on itself...
/i tried all kinds of "restore to factory settings" but not solved. Can anyone tell me what to do tht will work. I coud not understand what was said in the above thread as i am new to this android n my first time rooting n stuff n i believe that solution would work for me too..if some one could please explain in simple tirms the steps i need to take would be good...
Really appreciate it....
revonomics said:
I think i got the same problem. i tried to Unlock Bootloader and Root Google Nexus One which was successful but then i tried to superboot it and when it came to the part where you "double click the ‘install-superboot-windows.bat’ file" i clicked it but it did not go to the nnext screen where the superboot completes it just stayed at the "bootloader screen". i must hve not done something or done something wrong i dont know.
So then i unplugged the phone from the pc and rebooted it. when it reeboted i wasnt getting any network, the phone was slow and the notification bar would not slide down...also i noticed the phone restarting on itself...
/i tried all kinds of "restore to factory settings" but not solved. Can anyone tell me what to do tht will work. I coud not understand what was said in the above thread as i am new to this android n my first time rooting n stuff n i believe that solution would work for me too..if some one could please explain in simple tirms the steps i need to take would be good...
Really appreciate it....
Click to expand...
Click to collapse
Tell me what i need to download again and how to go about it...i really need my phone working again ((((
Ok, so I recently bought a used dell streak off of a friend, and although I like it, I don't like dell's ROM, so my main goal here is to install a custom rom.(Specifically, streakdroid 2.0.0). I was able to root my phone, however I am having issues flashing the recovery image,to get to installing the custom rom. I have tried using rom manager to install clockwork, and when I do it says it installs fine, but when I tell it to reboot into clockwork, the phone just boots up normally into android.When I boot using power + vol up + vol down, it just boots into the stock recovery image. I have also tried using fastboot to flash the recovery image using the clockwork recovery image for the dell streak. The command line says the flash was completed, yet again when I boot into the recovery image it is still the dell streak stock recovery image. I also renamed the file: system/ect/install-recovery.sh to system/ect/install-recovery.sh.bak , following another post's advice, still no luck. I have spent several hours looking on forums on how to fix it, and can't find anyone with this problem on the dell streak. I have also tried to find a way to install a custom ROM without using a recovery image, but haven't been able to do that either. Any help at all would be greatly, greatly appreciated, even a possible tip to point me in the right direction.
For some more info about my phone, I do believe that it might be a corporate edition, I don't know if that would effect anything or not, the other details are as follows:
Model Number : Dell Streak
Android version: 2.2.2
Baseband version: GAUSB1A135100-US
Kernel version: 2.6.32.9-perf
OEM Version: GAUSB1A135100
Build number : 15609
Custom Recovery – Prevent Overwriting on Dell Streak
I already tried the advice given on that link. I can't even get into the custom recovery image even one time.
Also I meant to post this under the Q & A forum, if it's possible for someone to move this post, I'd appreciate it.
damoshemeister said:
I already tried the advice given on that link. I can't even get into the custom recovery image even one time.
Click to expand...
Click to collapse
Rename install-recovery.sh before you install the custom recovery. If the phone boots even once the recovery is over written with the stock recovery if you don't.
Also - there are a bunch of posts that state that ROM Manger does not work on the Streak.
I have also tried using adb to flash the recovery image after renaming the file and immediately booting into the recovery image after installing. Still same issue. Also without even renaming that file, I believe I am still supposed to be able to access the custom recovery image one time.
You do have to enter the stock recovery to get into ClockworkMod or StreakMod. It's what you do after you get into stock recovery that takes you into CM or SM.
Rather than tell you how to do it, I will tell you to READ those guides posted above for the answer. If you don't want to do that, then you should stop messing with something you don't understand before you brick your new toy! The Streak doesn't root, recover, or update ROMs like other Android devices.
Ok, while I did have legitimate issues with rom manager it turns out I had a misunderstanding of how to install streamod,as you pointed out. Please forgive me, I was pouring over a ton of information in a very short amount of time, including being completely new to android, how to install apks from a pc, jailbreaking, using adb fastboot to flash images, all for the first time. I didn't realize you had to update from within the stock recovery image to install streakmod. I appreciate your help allot. I was able to successfully install streakdroid like I wanted, wouldn't have been able to do it without your help. Thanks again.
Glad to see you got it up and going. I can understand your frustration. The first time I played with my Streak I bricked it and took it to someone to fix and he didn't know much more than I did about it.
When I got it back unfixed, I spent several days reading and now consider myself fairly proficient in the art of flashing, although I haven't made any steps into cooking up my own ROMS or all the other technical stuff that goes with what these unselfish guys go through for us.
Have fun!!
damoshemeister said:
Ok, while I did have legitimate issues with rom manager it turns out I had a misunderstanding of how to install streamod,as you pointed out. Please forgive me, I was pouring over a ton of information in a very short amount of time, including being completely new to android, how to install apks from a pc, jailbreaking, using adb fastboot to flash images, all for the first time. I didn't realize you had to update from within the stock recovery image to install streakmod. I appreciate your help allot. I was able to successfully install streakdroid like I wanted, wouldn't have been able to do it without your help. Thanks again.
Click to expand...
Click to collapse
Sorry to have been so tough on you. That's the only way to get people to UNDERSTAND what they are doing to their devices. Now that you found it on your own, you will remember it. You also stumbled onto some other info that may not pertain to your situation now, but you will remember seeing it in the future when you need it!
Here is another concise guide that is excellent and a short read:
http://forum.pocketables.net/showthread.php?t=8715
Good Luck!
kraz
Yea, I definitely understand where you guys are coming from. I do like to try to figure stuff out on my own, and did spend some considerable time reading before I posted on this forum. You guys gave the exact help I was looking for, just a nudge in the right direction. Knowledgeable people can save newbs like me hours in frustration.What threw me off was partially bad luck, but definitely due to incomplete understanding as well. It was the combination of rom manager not working , and me not properly understanding how to install streakmod that led to me thinking it had something to do with the bootloader blocking the recovery image from being flashed. I thought I was gonna end up having to flash the bootloader but definitely didn't want to do this as that would have been very vulnerable to bricking. I read the basics on the different images, and what they did before I tried anything. I did end up at one point with my streak not being able to boot, or update from an update.pkg but since I knew I didn't touch the bootloader, I knew I should be able to get it up and running again. THanks for the link, I will definitely read it.
did u try
flash the clockworkmod or the other recovery image. when the flash was done, it will boot the dell streak, meanwhile, press vol up and down, boot into the recovery mood again, I mean NEVER let the streak boot into the rom afte u flash the image.
Sent from my Dell Streak using XDA App
marvin02 said:
Rename install-recovery.sh before you install the custom recovery. If the phone boots even once the recovery is over written with the stock recovery if you don't.
Also - there are a bunch of posts that state that ROM Manger does not work on the Streak.
Click to expand...
Click to collapse
what do i rename " install-recovery.sh " to?
thanks
I renamed mine to "install-recovery.sh.bak", but I have seen "do-not-install-recovery.sh". In other words, you can rename it to whatever you want.
Strephon Alkhalikoi said:
I renamed mine to "install-recovery.sh.bak", but I have seen "do-not-install-recovery.sh". In other words, you can rename it to whatever you want.
Click to expand...
Click to collapse
every time i try to rename it i get a failed message. any other suggestions? thanks for the help in advanced
You have to mount the internal SD as R/W, it's in R/O it sounds like
trucutu62 said:
every time i try to rename it i get a failed message. any other suggestions? thanks for the help in advanced
Click to expand...
Click to collapse
As noted by the post just prior to this one, the system partition is read-only. You need to change it temporarily to read-write using a file manager that can do the job. I used Super Manager, but there are plenty of root file manager apps on the Market that can do the job.
I can get into recovery but it doesnt show the three images.
Made the mistake of wiping thinking I was on my S2 where I could access all files.
get to recovery now, no fast boot or ADB . Should I bin it or return it?
Thank you.
amadablam said:
I can get into recovery but it doesnt show the three images.
Made the mistake of wiping thinking I was on my S2 where I could access all files.
get to recovery now, no fast boot or ADB . Should I bin it or return it?
Thank you.
Click to expand...
Click to collapse
It's probably not completely broken... I can't offer any advice but generally these things (android devices) are salvageable as long as they still power up. It does take some know-how though.
That said, should you decide to bin it, I'd gladly pay you something for it. Sad to see it just tossed in the trash.
Id gladly pay something for it also, PM if interested.
If you can get to the bootloader, it's probably fine, and can be fixed. Might have to follow instructions as to how to restore a factory image, and then continue from there.
Find a factory image you can flash via fastboot. There should be a thread around with them in it.
Basically it is the same process you used to flash the recovery. I think CyanogenMod's wiki has a article on how to use it.
xjman said:
Find a factory image you can flash via fastboot. There should be a thread around with them in it.
Basically it is the same process you used to flash the recovery. I think CyanogenMod's wiki has a article on how to use it.
Click to expand...
Click to collapse
You can use the Nexus 7 Toolkit to try to fastboot flash your factory image if you aren't comfortable working with the SDK, ADB, etc.
Hello my fellow XDA Members. I am stuck in a tight spot and after reading and re-reading some things the situation doesn't look very promising. I hope this is the moment that Karma shows up and I can get some help on this. Here it goes.
Specs - LG G2 D801 Variant > TWRP V2.8.3.1 > NO OS Currently
I was running Cloudy G3 Rom smoothly and got bored and decided to flash that new rom that is a 5.0 Rom all variants. Did the usual back ups and flashed it. Something happened when I flashed the rom. It went through the Aroma installer and then said "successful" but stuck in a bootloop. I tried it again and nothing happened. Then I tried to wipe everything again and started getting an E: Cannot mount (data or system I forget which as that error went away after I completely formatted data, wiped everything and reflashed Cloudy Stock. )
> Cloudy stock bootlooped and nothing is happening in TWRP. I Am using the USB OTG method of getting files on the phone and getting it charged but anytime I try to do anything (flash a rom, an older version of TWRP) it just immediately restarts TWRP and thats that. I have No OS at all.
> I tried to use one of the methods to get into download mode and flash a stock KDZ but the phone acts like it is going into DL mode (shows the little blue transition screen) but never gets into the ACTUAL download mode where the PC or flash tool can recognize it.
So in a nutshell > No OS > I can get into TWRP but it does nothing > No Download Mode > Don't want a new phone > Don't want to take it apart and try to short circuit anything if possible. LOL.
I am totally stuck here. I am done alot of work and even helped friends and family out with their devices over the years. I am just not sure if I need to consider it a done deal and get a new phone or maybe one of you guys know of something easy and obvious (please let it be the latter) I am missing. Thanks for any help you can offer. I Will be standing by.
Have you tried to reflash bootloader? If not, do that and reflash cloudy right away
wisefreakz said:
Have you tried to reflash bootloader? If not, do that and reflash cloudy right away
Click to expand...
Click to collapse
I haven't thought about flashing a bootloader. How would I flash the bootloader if I can not the phone into either DL mode and or TWRP doesn't do anything either? Is a bootloader file just a flashable file like any other .zip file?
jcnbama said:
I haven't thought about flashing a bootloader. How would I flash the bootloader if I can not the phone into either DL mode and or TWRP doesn't do anything either? Is a bootloader file just a flashable file like any other .zip file?
Click to expand...
Click to collapse
@jcnbama
Have you tried this or this?
euphoria360 said:
@jcnbama
Have you tried this or this?
Click to expand...
Click to collapse
The first one I can not do as I do not have any knowledge at all of Ubuntu, Linux, or any of that. It would take forever to get a working knowledge of that software in order to get things going again. I would probably just have to either take it to a cellphone repair shop or get another phone before I could do the first link.
I have not tried the second one but it is a viable option. I was looking at it online and trying to talk myself down from having to do that. I would reallllllllly rather not have to take my phone apart if I can keep from so that's kind of what this post is all about. Just trying to see if anyone knows of ANYTHING else before I go taking apart my phone.
Can you describe more about "twrp doesnt do anything"?
Does twrp boot up?
Can u see/wipe partitions?
Can u install any rom in twrp? Does it finish?
euphoria360 said:
Can you describe more about "twrp doesnt do anything"?
Does twrp boot up?
Can u see/wipe partitions?
Can u install any rom in twrp? Does it finish?
Click to expand...
Click to collapse
TWRP boots and I can go into wipe, advanced wipe, and format data and it says it's successful. I can use file manager and move items back and forth from USB OTG. If I try to flash anything it just reboots TWRP immediately so I can't install any .zip files at all.
My guess is that your bootloader is damaged.
The only option i can see for you is that Ubuntu thing i shared with you. So, lets stop acting lazy and do what needs to be done. Dont scare since there is nothing to loose. LG G2 is unbrikable
Booting up ubuntu or any other linux os is so easy. And there is nothing much to learn. Trust me.
Go to ubuntu website and download their newest iso file. Burn it on dvd and boot it up. You dont have to install it, just choose "live mode" and it boots up. Just like that. Then yiu can proceed with tutorial mentioned above and it shouldnt take more than an hour from you. Its all typing some commands in terminal (remember CMD in windows!).
Just make sure to download the files mentioned in that tutorial before proceeding.
euphoria360 said:
My guess is that your bootloader is damaged.
The only option i can see for you is that Ubuntu thing i shared with you. So, lets stop acting lazy and do what needs to be done. Dont scare since there is nothing to loose. LG G2 is unbrikable
Booting up ubuntu or any other linux os is so easy. And there is nothing much to learn. Trust me.
Go to ubuntu website and download their newest iso file. Burn it on dvd and boot it up. You dont have to install it, just choose "live mode" and it boots up. Just like that. Then yiu can proceed with tutorial mentioned above and it shouldnt take more than an hour from you. Its all typing some commands in terminal (remember CMD in windows!).
Just make sure to download the files mentioned in that tutorial before proceeding.
Click to expand...
Click to collapse
First of all calling people lazy is not nice. I'm not lazy I am trying to play it safe. I wouldn't want to brick it to the point to where I don't even have recovery and it can not even be charged any longer. I have Ubuntu on my desktop upstairs. I have used it a little. It's not that I am completely ignorant to Ubuntu I am just a total novice. Also the issue described in that post doesn't exactly match my situation. I am not in a black screen. It's more like a bootloop that I can not get out of because TWRP is not doing what it needs to do and I can not flash TWRP a ROM or get into DL mode at all. Also that post says,
"VERY IMPORTANT!!!!!!! You must use the img files that correspond to the ROM you have installed before getting the problem to avoid breaking your phone."
I don't have a rom on my phone soooo...
You didn't answer my question well. If on TWRP you can finish installing rom without any error, and you keep coming to twrp after restarts, that's another situation. Try this:
http://forum.xda-developers.com/showthread.php?t=2451696
But if you cant even finish install in twrp (twrp gives you errors or just restarts before giving you "successful", either you have problem in rom you try to flash or you need to build everything up from start.
That lazy thing was for encouraging you to do it.
And you cant brick your device. There is always a way on G2.
For img files: find them from last stock rom that was working on your phone.
Deleted