Hi guys,
I've bought a used s4, and after some time spended knowing the new cell phone I saw on the boot screen "Galaxy GT-I9515L" and start to look for a custom rom to this model. But there isn't any one right?
But there's some weird thing , in the back part of the cell where's located the battery is written model "I9505" and the box that came with it have the same thing, "model "i9505".
But when I tried to install a custom or the original rom for this version using the Odin an error message appears and I can't install. Then I tried to put a original lolipop version to "I9515L" and works fine whitout problems and errors.
So what can it be? Maybe the older owner had put an wrong rom? If so, how can I fix this?
Sorry for my bad English. Hope that you guys can understand and help me.
Thanks
Boot into download mode. There is your model.
Ignore everything else, just look at the download mode.
Hi all. I've got a watch Tencent PQ708 QQwatch. Once I received this watch it worked normally, I tried to update it up to last firmware v.53 from official application, it updated without any errors, after reboot display doesn't work at all, I can hear sound on switch on/off, but display still blank. Also tried to reflash it with Flash Tool, but result is still the same. Maybe somebody has previous version of firmware ?
Did you find a solution?
Hi Guys,
So my friends Note 4 wouldn't boot and i tried everything to fix this flashing every recovery firmware i could find using Odin but i couldn;t get the phone to boot.
I decided to replace the motherboard but i could only find one from China, I have fitted the motherboard and the phone boots fins but its stuck on Android 4.4.4 and I cant install new firmware via the phone and the phone wont connect to Samsung Kies.
Is it worth trying to flash firmware via Odin or will I be stuck in a bootloop again?
I waited a long time for the motherboard and dont want to be back at square 1 again.
The model is N910F if you believe its worth trying and I wont be stuck in a booth loop please can you post a link to the latest firmware below.
Thanks in advance
This is the one that finally worked for me. I went to the SamMobile site to get it. I installed it with Odin.
N910FXXS1DQ15_N910FOXA1DQF1
I tried flashing a patched kernel to fix Magisk, but it looks like it was built on an older firmware and it bricked my device. I looked online and tried to find a flashable zip to return to full stock and start over, but the only one I can find is too old and is failing to flash in RSD Lite. I don't know what firmware version my device had before I started flashing, so I'm looking for anything that's compatible with the recent security updates.
My device is able to get to Fastboot, so I think it can still be saved. Any help would be very much appreciated.
https://androidfilehost.com/?fid=818222786056035851
Just in case my answer didn't go through. That's the newest I could find.
Thanks. My device has come back from the dead!
Hello, everyone,
I tried to install LineageOS on my S10 Plus yesterday. That worked so far, but I found that it didn't have a decent camera app and the Samsung Watch wasn't that easy to connect either. So I thought I'd just go back to the Stock ROM again. I then downloaded the latest stock firmware according to this guide and installed it with Odin. The installation also runs through, after the installation the mobile phone starts and after the start screen there is an Android man with the signature "Erasing". After a few seconds, the device turns off and stays black. Even if I put it on the charger or try to restart it, nothing happens. I keep getting into download mode and recovery, but that's about it. Multiple reinstallations and resets via the recovery didn't help - the phone just won't start.
I used the CSC_... and not the HOME_CSC_... at the firmware is the right one for my phone.
Is there any way I can salvage the device? I'm afraid that something in the memory is defective now, which has nothing to do with the flashing itself. Do you have any ideas?
Many thanks!
tefracky said:
Hello, everyone,
I tried to install LineageOS on my S10 Plus yesterday. That worked so far, but I found that it didn't have a decent camera app and the Samsung Watch wasn't that easy to connect either. So I thought I'd just go back to the Stock ROM again. I then downloaded the latest stock firmware according to this guide and installed it with Odin. The installation also runs through, after the installation the mobile phone starts and after the start screen there is an Android man with the signature "Erasing". After a few seconds, the device turns off and stays black. Even if I put it on the charger or try to restart it, nothing happens. I keep getting into download mode and recovery, but that's about it. Multiple reinstallations and resets via the recovery didn't help - the phone just won't start.
I used the CSC_... and not the HOME_CSC_... at the firmware is the right one for my phone.
Is there any way I can salvage the device? I'm afraid that something in the memory is defective now, which has nothing to do with the flashing itself. Do you have any ideas?
Many thanks!
Click to expand...
Click to collapse
same thing happened to me today. but I flashed my s10e the bootloader and modem file of android 9 from twrp, the phone did not boot up and I loaded the stock rom again, then when I open it, it's the same as yours, I really need urgent help.
Releases · corsicanu/9820-bootloaders_and_modems
Contribute to corsicanu/9820-bootloaders_and_modems development by creating an account on GitHub.
github.com
EDİT: Anyway, I solved the problem, I flashed the bootloader and modem file that is suitable for my current version from the same site with twrp and the phone turned on. maybe you can solve it by flashing the bootloader and modem file suitable for the current version. try if you want
Thanks a lot, this worked!
tefracky said:
Thanks a lot, this worked!
Click to expand...
Click to collapse
I'm glad it worked.
I was very afraid that the phone died, what did you do for 5 days in this state?
Now I have a question in my mind: When Samsung releases an update in the future, will the bootloader and modem files be updated when we update it with odin? won't it be updated? After that, do we will always update manually as twrp? do you have any idea?
Well, I simply didn't use a mobile phone in these days. It was a very "interesting" experience, but not a huge problem. I sometimes opened WhatsApp as Windows App (interestingly, which works without phone).
I don't know, what happens at a Samsung Update, but until Android 13, I will not update (so probatly never). In our German forum (www.android-hilfe.de), a pre rooted and debloated "Stock"-Firmware is provided, but I can't install it, since my Bootloader is too new (V15 instead V14 for the ROM). When it is possible, I will install this firmware. If you are interested, here is the link: https://www.android-hilfe.de/forum/...3-2022-stock-rom-v2-0-pre-rooted.1000713.html
tefracky said:
Well, I simply didn't use a mobile phone in these days. It was a very "interesting" experience, but not a huge problem. I sometimes opened WhatsApp as Windows App (interestingly, which works without phone).
I don't know, what happens at a Samsung Update, but until Android 13, I will not update (so probatly never). In our German forum (www.android-hilfe.de), a pre rooted and debloated "Stock"-Firmware is provided, but I can't install it, since my Bootloader is too new (V15 instead V14 for the ROM). When it is possible, I will install this firmware. If you are interested, here is the link: https://www.android-hilfe.de/forum/...3-2022-stock-rom-v2-0-pre-rooted.1000713.html
Click to expand...
Click to collapse
thanks, if i'm going to use stock rom i prefer to root it myself