Related
Please note that i am not responsible if you brick your Galaxy Tab.
This worked for me and i now have a Galaxy Tab, on At&t making calls + 3G data + 850/1900Mhz WCDMA enabled.
**please note you need to have a SIM card with a proper voice plan and DATA plan for this to work. do not try this with the prepaid card that came with the Tab.
1) Download the firmware P1000XWJJ4 from HERE (pass: samfirmware.com)
2) download the firmware P1000XXJK5 from HERE (pass: samfirmware.com)
3) download Odin 1.3 from HERE
4) download the modem_bell_i9000.zip file attached to his post and extract it.
A) put you tab into download mode and flash P1000XWJJ4 with P1_add_hidden.pit and repartition selected. The phone will reboot and will be in Russian.
B) Put the phone into download mode again. flash P1000XXJK5 with NO repartition and NO PIT file. the phone will reboot with the latest euro firmware in english.
C) finish the setup wizard, if you do not get DATA at this point (3G or EDGE) at this point go into APN settings and change the APN from "Broadband" to "wap.cingular"
D) Put the Tab into download mode and flash the attached modem.bin file (the one you extracted) by selecting the bin file under "phone" in Odin. NO repartition and NO PIT file.
E) At this point your phone will reboot and you should have 850/1900Mhz enabled and everything you should work just like the euro version of the Tab.
Done and done.
UPDATE: I found that at&t are disabling HSUPA on the Tab, thus using the at&t original modem will not be ideal. I found that the Bell Galaxy S 2.2 modem is the only modem i found so far that will give us 850/1900Mhz + HSUPA + voice calls.
Please flash this modem instead. it is attached.
Nice... How come we need to go to the Russian ROM first? Thanks again Clubtech.
Because it is the only real full flash firmware we currently have and that fixes the boot logo problem i had when i didn't do a full flash before.
XXJK5 is not a full flash, but incremental one so we have to flash twice.
Will this work with tmobile tab?
mywingtophone said:
Will this work with tmobile tab?
Click to expand...
Click to collapse
No.
10chars
Wow you are a real genius , this tab just cameout today and u already found a way to make the voice work compared to the other post here about flashing their tmobile tab still scratching their butt trying to figure out how to make it work. Can you help us tmobile user to make our device working with voice and 3g? I got 3 more days to return it and get at&t.
Great instruction too! Your the man!
mywingtophone said:
Wow you are a real genius , this tab just cameout today and u already found a way to make the voice work compared to the other post here about flashing their tmobile tab still scratching their butt trying to figure out how to make it work. Can you help us tmobile user to make our device working with voice and 3g? I got 3 more days to return it and get at&t.
Great instruction too! Your the man!
Click to expand...
Click to collapse
T-mobile are blocking the data plans by IMEI, so there is nothing we can do unless you want to fake your IMEI.
As long as the IMEI stays the same, even if you got 3G and voice to work, data will still be blocked on regular phone plan sim cards so there is no point really.
For blocking by IMEI T-mobile should see all their tabs returned as far as i care.
Could this work for Sprint?
shoman24v said:
Could this work for Sprint?
Click to expand...
Click to collapse
No. These firmwares are only for GSM models.
so if i get a att tab do what you posted and unlock it then add my unlimited t mobile sim will i still be blocked?
maxtcee said:
so if i get a att tab do what you posted and unlock it then add my unlimited t mobile sim will i still be blocked?
Click to expand...
Click to collapse
It shouldn't be blocked (unless T-MO is blocking ALL Tab IMEI's, not just their own), but even so you'll be unable to use 3G, it'll be EDGE only, since the AT&T device won't support T-Mo's AWS frequencies.
clubtech said:
T-mobile are blocking the data plans by IMEI, so there is nothing we can do unless you want to fake your IMEI.
As long as the IMEI stays the same, even if you got 3G and voice to work, data will still be blocked on regular phone plan sim cards so there is no point really.
For blocking by IMEI T-mobile should see all their tabs returned as far as i care.
Click to expand...
Click to collapse
What if i flash it using your instruction and insert my att sim card will it work?Thanks a million!
A small update.
So it appears that at&t have disabled HSUPA so the upload speeds are slow (it is capped around 386Kbps).
I tried flashing the Bell modem.bin. it kept the 850Mhz and disabled the upload cap but i could not longer make or receive calls.
Flashing back to the at&t modem back and i was able to make calls but the upload speed is again capped.
Thank-you at&t!!! for crippling my hardware!!
Anyone can post the modem from Rogers? that would be helpful to try.
mywingtophone said:
What if i flash it using your instruction and insert my att sim card will it work?Thanks a million!
Click to expand...
Click to collapse
It will work on EDGE only. no point.
clubtech said:
A small update.
So it appears that at&t have disabled HSUPA so the upload speeds are slow (it is capped around 386Kbps).
I tried flashing the Bell modem.bin. it kept the 850Mhz and disabled the upload cap but i could not longer make or receive calls.
Flashing back to the at&t modem back and i was able to make calls but the upload speed is again capped.
Thank-you at&t!!! for crippling my hardware!!
Anyone can post the modem from Rogers? that would be helpful to try.
Click to expand...
Click to collapse
these f#@$$%^^$#@%^&*()(*&^%$%^&*()_)(*&^%$%^*()(*&^%^&*()(*&^%$%^&*()(*&^%$#$%^&*()_)(*&^%$#@#$%^&*(M(*&^%$%^&*(MM*(&^%$#%^&* U.S carriers
clubtech said:
Please note that i am not responsible if you brick your Galaxy Tab.
This worked for me and i now have a Galaxy Tab, on At&t making calls + 3G data + 850/1900Mhz WCDMA enabled.
**please note you need to have a SIM card with a proper voice plan and DATA plan for this to work. do not try this with the prepaid card that came with the Tab.
1) Download the firmware P1000XWJJ4 from HERE (pass: samfirmware.com)
2) download the firmware P1000XXJK5 from HERE (pass: samfirmware.com)
3) download Odin 1.3 from HERE
4) download the modem.zip file attached to his post and extract it.
A) put you tab into download mode and flash P1000XWJJ4 with P1_add_hidden.pit and repartition selected. The phone will reboot and will be in Russian.
B) Put the phone into download mode again. flash P1000XXJK5 with NO repartition and NO PIT file. the phone will reboot with the latest euro firmware in english.
C) finish the setup wizard, if you do not get DATA at this point (3G or EDGE) at this point go into APN settings and change the APN from "Broadband" to "wap.cingular"
D) Put the Tab into download mode and flash the attached modem.bin file (the one you extracted) by selecting the bin file under "phone" in Odin. NO repartition and NO PIT file.
E) At this point your phone will reboot and you should have 850/1900Mhz enabled and everything you should work just like the euro version of the Tab.
Done and done.
Click to expand...
Click to collapse
On step a), it's really a 2 steps process right? Meaning
1. Download the pit file
2. Flash the PDA, Phone and CSC
according to general flashing instruction here http://www.samfirmware.com/P1000 how to flash.pdf ?
And when come the 2nd flash, skip the pit file and flash the other 3: PDA, Phone and CSC?
Thanks again.
clubtech said:
T-mobile are blocking the data plans by IMEI, so there is nothing we can do unless you want to fake your IMEI.
As long as the IMEI stays the same, even if you got 3G and voice to work, data will still be blocked on regular phone plan sim cards so there is no point really.
For blocking by IMEI T-mobile should see all their tabs returned as far as i care.
Click to expand...
Click to collapse
and what do you lose from corrupting ur IMEI #? i see nothing but gaining from it.
ayman07 said:
and what do you lose from corrupting ur IMEI #? i see nothing but gaining from it.
Click to expand...
Click to collapse
your warraunty
Ok, Bell GT-P1000M is now flashed with JK5 and the AT&T Modem, and is fully voice and data functional on Telus (I manually unlocked it) in both 850 and 1900 bands.
Rock on.
Since the Rogers version is the same as AT&T, this should work on the Rogers galaxy tab too right?
After spending long nights of investigations, I here present the solution for those LG Quantum users like who want to get onto Rogers Canada Network.
So far I have done 2 LG Quantums and all works fine for both data and MMS.
Here are the steps:
1. Download the attached LGC900KB_100927_MP.zip and extract it somewhere. You will get LGC900KB_100927_MP.dll.
2. Goto nasirahmed's post regarding LG Quantum's original firmware thread. (Great job, nasirahmed!)
http://forum.xda-developers.com/showthread.php?t=935605
Download the LG C900K Australia version firmware and of course "LGDP2 V36 UMTS Setup" tool.
3. Follow the steps in nasirahmed's instructions to flash the LGC900K firmware. When you are asked for "DLL Selection", pick the one you have just extracted.
4. If everything goes well, you should have the C900K firmware pre-nodo version.
5. Start Zune and let it upgrade your firmware all the way to Mango. Be patient, it's a long process (about 1 hour).
6. Now you should have C900K mango on your phone, go to dialer and dial ##634# to install the MFG tool.
7. Disconnect USB and connect Wifi. Goto MarketPlace and download LG's Network Setup(In the LG App Store section).
8. Start the Network Setup tool it'll say something like "setttings changed, has to reboot". Let it reboot.
9. Then start MFG tool, password "277634#*#", "Engineering" -> "Other Options" -> Pick Registry editor.
Change the following key to 0.
LM_LOCAL_MACHINE\Software\LGE\DYNPROV\XMLList
Key = "RGS_CA_302_720"
Type = DWORD
10. Exit the MFG tool. Then run Network Setup again, it will reboot again.
11. Now you should have the Roger's Profile everything set up including the MMS.
12. Enjoy!
p.s.
The reason why it has to be C900K:
Only the C900K has the required the application lge_dynprovapp.exe to do dynamic provisioning. The Bell and AT&T ones doesn't include the file in \windows.
The reason for my DLL:
The original DLL for C900B or C900 or C900K will not let you do cross model flash. My version will let you flash across C900-C900B-C900K.
thanks, I'm thinking this might also be useful in the future if the at&t or the telstra versions get the tethering update but bell doesn't.
Thanks a lot for this! Flashing between C900/B/K with provided .DLL and LGDP2 V36 UMTS Setup tool works smootly!
Unfortunately flashing to different firmware didn't fix my issue. C900 is not accepting SIM, but repeatedly prompt for PUK code. I'm almost ready give my money for Octopus or similar tool, after trying unlock codes and flashing with different firmwares...
This worked great for me once I figured out the nuances to Nasirahmed's instructions but there are a couple of areas that I got stuck on.
Here are Nasirahmed's instructions from http://forum.xda-developers.com/showthread.php?t=935605 with some notes in red so you don't waste time uninstalling and reinstalling drivers and software like I did trying to get this to work:
1. Download LGDP2 V36 UMTS Setup and extract, go to LGDP2_31_INCLUDE_LGDP1_Setup folder and install the exe (use serial number). Now copy all the files from DOWNLOAD folder and paste on C:\DOWNLOAD (overwrite if needed).
2. Install LG United Modem Driver, connect the phone to PC through USB cable and let the drivers to be installed. USB 1.1 is recommended. (note: phone has to be in Emergency Download mode at this point to get the drivers to install.. power off phone, then press Volume Down, Camera, and Power Button at the same time to get in Emergency Download mode.)
3. You'll need firmware in DZ format and the correct DLL for your model.
(note: Unplug phone from USB)
4. Open LGDP2_V36_UMTS from C:\DOWNLOAD, select UMTS in Division and click OK.
5. Select port (check Device Manager for LG USBModem Port number), you can set a range from easy select or select manually. Select DLL and select firmware in Downlaod Configuration. Click OK. (note: You need your phone plugged into USB in Emergecy Download mode to find the port number in Device Manager... otherwise, just click ALL under easy select. Also, don't worry about the "Can't find Monitor Port!" warning )
6. Click START in main window and connect the phone to USB cable in Emergency download mode(VOL+CAM+PWR). (note: Make sure phone is not plugged into USB before you click start, then plug it back in AFTER after you click start. The update will then start automatically and is finished after the phone reboots into Windows.)
Hi,
I live in INDIA, currently i have a AT & T unlocked LG Quantum ?
I am interested in trying the above flashing ?
By what way, it will help me. ?
Is there any advantage in flashing c900 K version over c900 ?
Please let me know.
yakaaithiri said:
Hi,
I live in INDIA, currently i have a AT & T unlocked LG Quantum ?
I am interested in trying the above flashing ?
By what way, it will help me. ?
Is there any advantage in flashing c900 K version over c900 ?
Please let me know.
Click to expand...
Click to collapse
Not sure if this will help you much.
As far as i remember, most of the indian provider's profiles are already in the stock rom. You just need MFG app to set the correct one.
Sent from my LG-P990hN using xda premium
chinabull, using the 900k firmware, what radio and firmware version do you end up with after all the mango and post mango updates?
LG setup tool??
I have an unlocked quantum and have followed along with no problems untill I need to get the LG network setup tool. I can't find it or access it anywhere. I tried marketplace after i did the firmware update to the australia rom. I found a place to get the tool .xap file but cant get it onto the phone. Anyone can help?
Oh and I'm in Canada trying to get the quantum on Rogers.
did you folks on the flashed telstra ROM get the wifi tethering update notice too?
edit, flashed the ROM myself, yes, you do get the tethering update.
Does this flashing to Australian ROM solves the problem of Caller ID on rogers network for LG quantum?
Caller ID is more important for me than the MMS, i only want to do this if it fixes caller id.
Thanks
bobzero said:
did you folks on the flashed telstra ROM get the wifi tethering update notice too?
edit, flashed the ROM myself, yes, you do get the tethering update.
Click to expand...
Click to collapse
Might be a reasonable way to get the wifi tethering update. I just got a reply back from LG Canada saying:
"Unfortunately we have been told that the phone will not support tethering and this cannot be added through an update."
I guess LG Canada figures the quantum can't get wifi tethering?
M_SK said:
Does this flashing to Australian ROM solves the problem of Caller ID on rogers network for LG quantum?
Caller ID is more important for me than the MMS, i only want to do this if it fixes caller id.
Thanks
Click to expand...
Click to collapse
Would also like to know this. Does the Telstra ROM fix the caller ID issue on the Fido/Rogers network?
I personally don't use this specific phone regularly.
I did it purely because I promised my friends to help them to fix the MMS issue.
Just talked to them and they did mentioned about the caller id sometimes works and sometimes doesn't.
If you are talking about similar issue, then probably no.
chinabull said:
After spending long nights of investigations, I here present the solution for those LG Quantum users like who want to get onto Rogers Canada Network.
So far I have done 2 LG Quantums and all works fine for both data and MMS.
Here are the steps:
1. Download the attached LGC900KB_100927_MP.zip and extract it somewhere. You will get LGC900KB_100927_MP.dll.
2. Goto nasirahmed's post regarding LG Quantum's original firmware thread. (Great job, nasirahmed!)
http://forum.xda-developers.com/showthread.php?t=935605
Download the LG C900K Australia version firmware and of course "LGDP2 V36 UMTS Setup" tool.
3. Follow the steps in nasirahmed's instructions to flash the LGC900K firmware. When you are asked for "DLL Selection", pick the one you have just extracted.
4. If everything goes well, you should have the C900K firmware pre-nodo version.
5. Start Zune and let it upgrade your firmware all the way to Mango. Be patient, it's a long process (about 1 hour).
6. Now you should have C900K mango on your phone, go to dialer and dial ##634# to install the MFG tool.
7. Disconnect USB and connect Wifi. Goto MarketPlace and download LG's Network Setup(In the LG App Store section).
8. Start the Network Setup tool it'll say something like "setttings changed, has to reboot". Let it reboot.
9. Then start MFG tool, password "277634#*#", "Engineering" -> "Other Options" -> Pick Registry editor.
Change the following key to 0.
LM_LOCAL_MACHINE\Software\LGE\DYNPROV\XMLList
Key = "RGS_CA_302_720"
Type = DWORD
10. Exit the MFG tool. Then run Network Setup again, it will reboot again.
11. Now you should have the Roger's Profile everything set up including the MMS.
12. Enjoy!
p.s.
The reason why it has to be C900K:
Only the C900K has the required the application lge_dynprovapp.exe to do dynamic provisioning. The Bell and AT&T ones doesn't include the file in \windows.
The reason for my DLL:
The original DLL for C900B or C900 or C900K will not let you do cross model flash. My version will let you flash across C900-C900B-C900K.
Click to expand...
Click to collapse
Hi can you make a DLL that will allow us to flash the Optimus 7 rom to our quantum. They both share the same hardware spec.
yakaaithiri said:
Hi can you make a DLL that will allow us to flash the Optimus 7 rom to our quantum. They both share the same hardware spec.
Click to expand...
Click to collapse
I'd be really wary of doing this, there are some differences 1) capactive vs physical windows button, 2) hardware keyboard.
I agree. If you want to flash different variant of firmware on your optimus 7, i can probably help.
Sent from my LG-P990 using xda premium
Hi bobzero, chinabull, and other Canadian Quantum users. I guess we all got the phone on Bell firesale. I unlocked it and moved to Speakout (Rogers) network now, but since I can't update all APN settings maps are not working. I'm not sure if you have similar problem. They load over home wireless but not when I'm using Speakout data.
My understanding is that here mentioned procedure would solve MMS issue so I was wondering would this help with maps issue too?
Issue is that I can't change all APN proxy values. I unlocked and moved one Android phone to Speakout recenty but since I had control over all APN settings maps are working great.
If this update doesn't help with maps is there any other way to update APN settings?
Edit: To clarify, when I open MFG I don't have any xml file to chose from under network configurations.
Thanks
CHINABULL, with the Telstra ROM, do you happen to know if text messages are received with the wrong time stamp as they are with the bell ROM ? thank you
chinabull said:
I agree. If you want to flash different variant of firmware on your optimus 7, i can probably help.
Sent from my LG-P990 using xda premium
Click to expand...
Click to collapse
hi Chinabull,
Just a question out of curiosity, is there a chance to flash a Optimus 7 Jil Sanders ROM to our Quantum.?
Can you make a DLL for the same ?
Yes, just confirmed the Time stamp issue is still there. But it seems it doesn't affect threading.
Sent from my LG-C900k using XDA Windows Phone 7 App
I have this strange problem where sometimes my modem does not work after a clean flash. Usually just making sure the data network preference is set to LTE solves the issue, and after 10 min or less the phone picks up the band. But I've just done a clean flash teamUB 1/11 and its been 24 hours with no data connection. This same build worked fine for this same phone a week ago, but the 1/19 broke the phone so I had to do a clean wipe and go back to 1/11.
I've played with data roaming options in CDMA roaming mode, set to domestic roaming, national roaming. Still no data
Any advice?
This is for a 900P (sprint) - Note that I am on CREDO (uses Sprint network)
EDIT - FIXED YAY!!! FULL LTE WORKING GREAT!
Reflashing the NKD modem for 5.0 +, with advice here:
http://forum.xda-developers.com/showpost.php?p=58338773&postcount=12
Changing APN/Mobile settings to recommended here:
http://forum.cyanogenmod.org/topic/84151-credo-mobile-4g/#entry430448
Iriez said:
I have this strange problem where sometimes my modem does not work after a clean flash. Usually just making sure the data network preference is set to LTE solves the issue, and after 10 min or less the phone picks up the band. But I've just done a clean flash teamUB 1/11 and its been 24 hours with no data connection. This same build worked fine for this same phone a week ago, but the 1/19 broke the phone so I had to do a clean wipe and go back to 1/11.
I've played with data roaming options in CDMA roaming mode, set to domestic roaming, national roaming. Still no data
Any advice?
This is for a 900P (sprint)
Click to expand...
Click to collapse
Since last time / last week have you flashed any new modems?
lingowistico said:
Since last time / last week have you flashed any new modems?
Click to expand...
Click to collapse
The issue started when I was forced to wipe my system data and do a clean install in order to get the phone functional after boot loop from 1/19 update. so yes, I would assume that the modem built into the 1/11 update I rolled back to (clean install) contained the modem. But, as stated, the 1/11 build was working fine for me before, and not now.
Is there a way to just update the modem itself on this build/phone? I've been wondering about that and wanted to try it if possible.
Iriez said:
The issue started when I was forced to wipe my system data and do a clean install in order to get the phone functional after boot loop from 1/19 update. so yes, I would assume that the modem built into the 1/11 update I rolled back to (clean install) contained the modem. But, as stated, the 1/11 build was working fine for me before, and not now.
Is there a way to just update the modem itself on this build/phone? I've been wondering about that and wanted to try it if possible.
Click to expand...
Click to collapse
There is no modem included in TeamUB's roms.
First thing's first, what model are you using? Go to signature settings and write your model there, this way whoever is helping you they will know what they're dealing with.
lingowistico said:
There is no modem included in TeamUB's roms.
First thing's first, what model are you using? Go to signature settings and write your model there, this way whoever is helping you they will know what they're dealing with.
Click to expand...
Click to collapse
Sorry, I wrote 900P in the first post, I thought that was enough information. I've updated my signature to contain more information.
thanks
Iriez said:
Sorry, I wrote 900P in the first post, I thought that was enough information. I've updated my signature to contain more information.
thanks
Click to expand...
Click to collapse
No need to say sorry man, just mean it makes it easier. Haha you're signature says 900O lol.
1 Install Samsung USB driver for mobile phones
2 Download the NE5 modem one click flasher here
3 Put your phone into download mode (Turn off the device, press Volume Down, Home and Power Buttons simultaneously, Once you see the warning message, release all buttons, Press Volume Up to enter download mode, Now your device should be in download mode)
4 Run the file from #2 and flash modem (if NE5 doesn't help try the other ones).
I don't think it's a modem problem though. IMO it's either the rom or the operator..
lingowistico said:
No need to say sorry man, just mean it makes it easier. Haha you're signature says 900O lol.
1 Install Samsung USB driver for mobile phones
2 Download the NE5 modem one click flasher here
3 Put your phone into download mode (Turn off the device, press Volume Down, Home and Power Buttons simultaneously, Once you see the warning message, release all buttons, Press Volume Up to enter download mode, Now your device should be in download mode)
4 Run the file from #2 and flash modem (if NE5 doesn't help try the other ones).
I don't think it's a modem problem though. IMO it's either the rom or the operator..
Click to expand...
Click to collapse
The NE5 throws a <OSM> MD5 hash value is invalid error. I flashed the ND2 version and no immediate data connection, but from past experience it can take a little while for the modem to sync. No idea what causes the delay, but everytime i flash a new rom it can take sometimes up to 30min before it gets a data connection. Been 15min no connection yet.
Couldnt find a mirror anywhere of that NE5 one click flasher. Know of any other hosts? i googled to no avail.
Iriez said:
The NE5 throws a <OSM> MD5 hash value is invalid error. I flashed the ND2 version and no immediate data connection, but from past experience it can take a little while for the modem to sync. No idea what causes the delay, but everytime i flash a new rom it can take sometimes up to 30min before it gets a data connection. Been 15min no connection yet.
Couldnt find a mirror anywhere of that NE5 one click flasher. Know of any other hosts? i googled to no avail.
Click to expand...
Click to collapse
Try downloading the tar here and flash it in Odin.
lingowistico said:
Try downloading the tar here and flash it in Odin.
Click to expand...
Click to collapse
Update:
I have restored a old backup to kitkat, modem working fine, instant connection. Then I did a system wipe, clean flash to cyanogenmod 1/20 update released yesterday.....no modem. Restored backup again to kitkat, then did a dirty flash to 1/20 cyanogenmod.....no modem.
I think the issue is 5.0 itself. The issue is so random, I do not know how to troubleshoot it. I've installed maybe a dozen CM's so far, and its been a coin toss whether the modem works after install. Sometimes it syncs up after a few min, and sometimes never. its really strange because I had the modem working fine on TeamUB from late december, through 3 or 4 updates until 1/19 boot looped it. Now after that nothing has gotten the data back on other than restoring to kitkat.
When i did the clean install to cyanogenmod, on the startup process where it says 'waiting to activate cellular service' it gets stuck there and never activates the data.
Also, when trying to flash the NE5 tar md5 you linked to, I get md5 error! Binary is invalid. Im supposed to use AP, yes?
EDIT - Changed preferred network type to 3G and after a few reboots got data! Going to change back to LTE now and give it some time to see if i can get it to sync up.
Iriez said:
Update:
I have restored a old backup to kitkat, modem working fine, instant connection. Then I did a system wipe, clean flash to cyanogenmod 1/20 update released yesterday.....no modem. Restored backup again to kitkat, then did a dirty flash to 1/20 cyanogenmod.....no modem.
I think the issue is 5.0 itself. The issue is so random, I do not know how to troubleshoot it. I've installed maybe a dozen CM's so far, and its been a coin toss whether the modem works after install. Sometimes it syncs up after a few min, and sometimes never. its really strange because I had the modem working fine on TeamUB from late december, through 3 or 4 updates until 1/19 boot looped it. Now after that nothing has gotten the data back on other than restoring to kitkat.
When i did the clean install to cyanogenmod, on the startup process where it says 'waiting to activate cellular service' it gets stuck there and never activates the data.
Also, when trying to flash the NE5 tar md5 you linked to, I get md5 error! Binary is invalid. Im supposed to use AP, yes?
EDIT - Changed preferred network type to 3G and after a few reboots got data! Going to change back to LTE now and give it some time to see if i can get it to sync up.
Click to expand...
Click to collapse
No luck leaving it on LTE. When I switch back to 3g I can get a connection, LTE set in preferences I get no connection, not even 3g. I've been testing around the city and at my home, where I can always pickup a LTE connection from past experience.
It seems that the LTE protocol within 5.0 is buggy for my situation. If it works, it seems to work fine, but when it doesnt work, it never works. So its either glass is full or empty
Iriez said:
No luck leaving it on LTE. When I switch back to 3g I can get a connection, LTE set in preferences I get no connection, not even 3g. I've been testing around the city and at my home, where I can always pickup a LTE connection from past experience.
It seems that the LTE protocol within 5.0 is buggy for my situation. If it works, it seems to work fine, but when it doesnt work, it never works. So its either glass is full or empty
Click to expand...
Click to collapse
There are two versions of labels in Odin. The "normal" says "phone" the one I don't like says "CP". You have the Odin I don't like lol, so yours says "CP". That's where you put the modem. "AP" is for firmware/roms only.
Try these two modems, which I found on this page, NK4 for 4.4 while NKD is for 5.0.
Try Ktoosez kernel and also check your Apn settings, it's supposed to be optimised for CDMA phones and might help you.
lingowistico said:
There are two versions of labels in Odin. The "normal" says "phone" the one I don't like says "CP". You have the Odin I don't like lol, so yours says "CP". That's where you put the modem. "AP" is for firmware/roms only.
Try these two modems, which I found on this page, NK4 for 4.4 while NKD is for 5.0.
Try Ktoosez kernel and also check your Apn settings, it's supposed to be optimised for CDMA phones and might help you.
Click to expand...
Click to collapse
Wahooo! Flashing NKD with odin and messing with the APN's has fixed it!!! You rock!
I took a look at ktoosez kernel, what exactly would it bring to me? Always interested in new tools......
Iriez said:
Wahooo! Flashing NKD with odin and messing with the APN's has fixed it!!! You rock!
I took a look at ktoosez kernel, what exactly would it bring to me? Always interested in new tools......
Click to expand...
Click to collapse
Congrats! I'm glad it worked out Ktoonsez mentioned in the CM12 thread that his kernel was optimized for sprint/verizon phones in some way, don't remember what though :silly:
Are there any fellow Sprint users on the MXPE? If you are, are you running an AOSP ROM? Have you ever gotten data and voice roaming working on AOSP? If so, how'd you do it?
Yes, I've had data working on the orion rom (which I believe is cm13 based). Check your apn's, the one containing n5......something.or.other is the appropriate one IIRC.
Mobile networks should be cdma/lte.
Network data and voice is just fine for me. It's all roaming that's messed up. Will check apn's next time I flash.
gpz1100 said:
Yes, I've had data working on the orion rom (which I believe is cm13 based). Check your apn's, the one containing n5......something.or.other is the appropriate one IIRC.
Mobile networks should be cdma/lte.
Click to expand...
Click to collapse
I must be blind, but where do we find the APN settings on the phone?
^^It's a byproduct of "stock" software. APN's access is readily available in aosp/non stock roms.
The function is still there in the stock rom, but requires an extra step or two to get at it.
If you use a third party launcher such as nova, you can add it under activities. Long press a blank area on the home screen, select widgets, then swipe to the left on the top most row, select activities. Scroll down and open the settings entry then look for APN.
Or, use this - https://play.google.com/store/apps/details?id=de.szalkowski.activitylauncher&hl=en
I'm on Sprint with STOCK/LOCKED/UNROOTED and this phone flat out refuses to roam all over the US. Specifically what APNs should be in the STOCK list (I used Nova to access APNs) and they look to be there.
^^I don't think the apn has anything to do with roaming. Have you checked your roaming options under the main android settings?
Are you on a plan that provides roaming? Roaming properly enabled on your account? Updated the prl?
Kamkor82 said:
I'm on Sprint with STOCK/LOCKED/UNROOTED and this phone flat out refuses to roam all over the US. Specifically what APNs should be in the STOCK list (I used Nova to access APNs) and they look to be there.
Click to expand...
Click to collapse
I drive semi truck, my usual run is Wisconsin to Washington state and back. My phone, for the most part, will switch into roaming using TruPure. Two runs ago my phone wouldn't roam at all. I tried toggling data, updating PRL and the device config, eventually doing a clean flash, and still had no roaming. Eventually I ran the stock restore tool, flashed the modem separately, and did *#*#72786#*#* in the dialer. I'm back to roaming on a stock based ROM again. I haven't tried an AOSP rom since posting my question a few days ago.
misfit0313 said:
I drive semi truck, my usual run is Wisconsin to Washington state and back. My phone, for the most part, will switch into roaming using TruPure. Two runs ago my phone wouldn't roam at all. I tried toggling data, updating PRL and the device config, eventually doing a clean flash, and still had no roaming. Eventually I ran the stock restore tool, flashed the modem separately, and did *#*#72786#*#* in the dialer. I'm back to roaming on a stock based ROM again. I haven't tried an AOSP rom since posting my question a few days ago.
Click to expand...
Click to collapse
Edit: I also used *#*#rtn#*#*
^^Did you post about this in the rom thread? I'd guess one of the removed services is somehow affecting roaming.
I wanted to do a bit more trouble shooting first. Before my next to Washington, my plan was to flash AOSP and see if roaming was working again. I forgot to note, after confirming roaming was working on the stock ROM again, TruPure was flashed and was roaming properly too. My thoughts were that somehow Sprint provisioning got screwed up or a flash somehow messed up the modem.
When you flashed truepure again, what type of reset did you do (if any)?
Sprint's provisioning system is poop. Their system is a 2 part authentication. Your voice/text is tied to the device meid (not imei), data is tied to the sim card. This seems quite @ssbackward to me, considering verizon, tmo, att all associated your number with the sim card. While the device still transmits its imei during registration, no user intervention is needed when switching device. With sprint you need to log into the account and update the device too.
It seems each time you do a clean flash (wipe userdata), the software attempt to perform the 'handsfree' activation (or its equivalent on the moto x). If you perform a factory reset from within android, a number of carrier parameters get erased. If you a factory reset from twrp, they get retained.
I'm also on sprint but through ringplus, so no roaming included.
After running the http://forum.xda-developers.com/showthread.php?t=3199905
[WINDOWS TOOL][5.1.1]Moto X Style/Pure Edition "Restore-To-Stock-Tool" , flashing the modem separately, and doing the dialer codes, all was good with roaming. Roaming again worked with TruPure. Nothing special was needed. After restoring stock and reflashing TWRP, I just flashed TruPure like any other rom. No special steps were needed.
gpz1100 said:
^^I don't think the apn has anything to do with roaming. Have you checked your roaming options under the main android settings?
Are you on a plan that provides roaming? Roaming properly enabled on your account? Updated the prl?
Click to expand...
Click to collapse
Sorry for the long delay, been all over the place.
Yes plan provides roaming, and is enabled. PRL updated. I verified with Sprint customer care that the account is provisioned with no errors so I should be good to go on the Sprint side.
Im going to try what Misfit0313 did, restore to stock and flash modem. I'm assuming the return to stock takes it back to Lollipop so I'll get the MM OTA. Are you able to flash a modem on MM? Maybe the Modem side got corrupted somehow on my stock phone when it upgraded to MM right out of the box.
Buried in the Restore to Stock tool thread, there are directions to flash the modem separately via ADB. For some reason, the tool broke WiFi, necessitating the need for the modem reflash.
I just took the OTA to come from LP to MM
http://forum.xda-developers.com/showthread.php?t=2541924.
I flashed this fix on a clean install and AOSP roaming is working.
So roaming is controlled by the apn?? Interesting. Didn't realize that was the case.
Are you the same misfit on the freenode network/evo4g lte days?
gpz1100 said:
So roaming is controlled by the apn?? Interesting. Didn't realize that was the case.
Are you the same misfit on the freenode network/evo4g lte days?
Click to expand...
Click to collapse
Dude, yep its me. I don't stop in there too much anymore. Always bs going on in my life. Hobbit problems.
I tried to change APN settings as you suggested in AICP rom, but I kept getting a message like 'user doesn't have sufficient privileges to change settings'. That's why i gave that old ass fix a try. Reported in AICP thread. Went to south TX this week and I have no issues to report with voice or data roaming on AICP.
Still have the Infinity or did you move onto something badder?
misfit0313 said:
http://forum.xda-developers.com/showthread.php?t=2541924.
I flashed this fix on a clean install and AOSP roaming is working.
Click to expand...
Click to collapse
i can't set APNs or even make calls/texts on AOSP ROMs like Dirty Unicorn and PureNexis with Sprint...Flashing this zip fixed that for you?
Edit: Meh...just tried clean flashing PureNexis with the sprint.zip fix and still cant make calls or set APN's
My question: Is roaming working on stock based roms for you?
Stock roaming wasn't working for me, and Sprint insisted it wasn't at their end. After doing all the steps I mentioned previously, stock roaming finally was a go. I still had to flash the sprint.zip on a clean install to get AOSP roaming working. Without roaming on stock, there's no way roaming will work on any other ROM.
Hi guys:
i have looked on google etc. but can seem to find a answer. I bought a LG V20 H910PR (from claro unlocked) im using it on AT&T everything is running super fine but can't get 4G LTE only HSPA+. Is that from the phone that does not have all the bands for ATT or is there is something I need to setup?
Thanks,
Did you change your APN?
-- Brian
runningnak3d said:
Did you change your APN?
-- Brian
Click to expand...
Click to collapse
Yes the phone took the APN automatically
runningnak3d said:
Did you change your APN?
-- Brian
Click to expand...
Click to collapse
It has the NXTGENPHONE one I chaged it also to phone but still HSPA+
I will look and see if that model uses the same RSA key. If it does, then you can try flashing the entire AT&T firmware.
runningnak3d said:
I will look and see if that model uses the same RSA key. If it does, then you can try flashing the entire AT&T firmware.
Click to expand...
Click to collapse
Thanks
Your v20 supports most of att lte bands except band 17, all other should allow you to get lte with att. are you sure the apn is correct, and have you tried forcing the phone into lte mode?, use *#*#4636#*#*, if this menu does not work, download shurcutmaker from the playstore and search for network mode, that should allow you to open the network swtching menu.
runningnak3d said:
I will look and see if that model uses the same RSA key. If it does, then you can try flashing the entire AT&T firmware.
Click to expand...
Click to collapse
Hi,
Were you able to find if the firmware can be installed?
siulmagic said:
Your v20 supports most of att lte bands except band 17, all other should allow you to get lte with att. are you sure the apn is correct, and have you tried forcing the phone into lte mode?, use *#*#4636#*#*, if this menu does not work, download shurcutmaker from the playstore and search for network mode, that should allow you to open the network swtching menu.
Click to expand...
Click to collapse
Hi, I also have the same problem. The above mentioned code doesn't work, neither does the software you've mentioned. A bit more help will be appreciated.
Have the same problem on other operator. However if I reset the network settings and don't go into the network options it connects to 4G. If I just open the network settings, without touching anything, it locks to 3G/H+. There's no 4G option in network settings as mentioned. My APN is set up correctly. I did a bit of research and found these threads on Vietnamese forum, google translate was not helpful.
lgviet.com/forum/threads/mat-song-4g-ban-nao-ho-tro-minh-voi.66812/
lgviet.com/forum/threads/up-nhàm-rom-khác-khong-4g.67637/
lgviet.com/forum/threads/sua-loi-mat-3g-4g-lg-v20-h910pr.69517/
If you can't open the links, paste them in google and use google translate option. Any help would be appreciated.
vzeljkov said:
Have the same problem on other operator. However if I reset the network settings and don't go into the network options it connects to 4G. If I just open the network settings, without touching anything, it locks to 3G/H+. There's no 4G option in network settings as mentioned. My APN is set up correctly. I did a bit of research and found these threads on Vietnamese forum, google translate was not helpful.
lgviet.com/forum/threads/mat-song-4g-ban-nao-ho-tro-minh-voi.66812/
lgviet.com/forum/threads/up-nhàm-rom-khác-khong-4g.67637/
lgviet.com/forum/threads/sua-loi-mat-3g-4g-lg-v20-h910pr.69517/
If you can't open the links, paste them in google and use google translate option. Any help would be appreciated.
Click to expand...
Click to collapse
the reset method working for me, but this behaviour is weird, thanks though, i really down last week because of this, got scammed h910 version lol
Please see my write-up here: https://forum.xda-developers.com/v20/how-to/hardware-modem-modem-firmware-ril-t3744860
-- Brian
I running to other issue, when im on data and then there's call coming, after that my phone locked to 2G, i dont know how many time i must reset network....
runningnak3d said:
Please see my write-up here: https://forum.xda-developers.com/v20/how-to/hardware-modem-modem-firmware-ril-t3744860
-- Brian
Click to expand...
Click to collapse
Is it safe to root/flash ROMs onto H910PR (it has V10j-CLR-PR software) using the H910 methods mentioned here?
Dhikavolution said:
I running to other issue, when im on data and then there's call coming, after that my phone locked to 2G, i dont know how many time i must reset network....
Click to expand...
Click to collapse
Unfortunately I have the same issue, really disappointing. I'll try messaging the seller on aliexpress or I'll try to get in touch with the service on that Vietnamese forum I mentioned earlier. It is obviously software-side error so I am hoping this can be solved.
Also, you can go to service menu by typing *#546368#*910#.
Edit: After a bit of research I came across this thread: https://forum.xda-developers.com/lg-g3/help/lte-option-network-selection-t2827499
It is for LG G3 but the problem is the same. Basically Field test-Modem Settings-RAT selection - GSM/CDMA/LTE is a temporary fix. Other methods require root.
In the Field Test - PDP Setting - APN setting I have "LTE attach profile" which is hidden in the normal Network Settings menu. Don't know will modifying this to match my carrier's APN will change anything.
If you are still ARB 0, then you can use the H910 method. If you are ARB 1 or greater you will have to wait for the firehose method.
vzeljkov said:
Have the same problem on other operator. However if I reset the network settings and don't go into the network options it connects to 4G. If I just open the network settings, without touching anything, it locks to 3G/H+. There's no 4G option in network settings as mentioned. My APN is set up correctly. I did a bit of research and found these threads on Vietnamese forum, google translate was not helpful.
lgviet.com/forum/threads/mat-song-4g-ban-nao-ho-tro-minh-voi.66812/
lgviet.com/forum/threads/up-nhàm-rom-khác-khong-4g.67637/
lgviet.com/forum/threads/sua-loi-mat-3g-4g-lg-v20-h910pr.69517/
Hello, I am new to the site, something similar happens to me, I have an LG V20 H910, with the AT&T system it allowed me to select the 4G mode in the mobile networks option, now I changed the system for the company CLARO Puerto Rico And I don't get the 4G option in the settings, I only get 2G and 3G. It does not let me enter the hidden menu either, it tells me that it does not work on this device, I can not solve with the combination * # 546368 # * 910 #, I select the option only LTE, the coverage goes away and it comes back in 3G. Please, if someone solved this problem can you help me?
Click to expand...
Click to collapse
H910PR - How to root & install any ROM! (all lineage ROMs verified)
Hey guys! :D I've been struggling over the weekend to get my H910PR rooted w/ a custom ROM installed. I kept getting kernel panics saying 'modem crashed' but was finally able to figure it out. Step 1 - Root / TWRP I followed these steps...
forum.xda-developers.com