Related
So I was following all the steps from this thread: http://forum.xda-developers.com/showthread.php?t=2010312
and I did flash the stock 4.2 img. Now, after unlocking the boot loader, i didnt exit the fastboot mode and stayed in. And continued the steps of section D (all of it). Then I did a fastboot reboot , and Google appeared and below it unlocked lock and then the jellybean logo. It's been almost 20 min and it hasn't passed that screen yet. The rainbow colour X.
What do I do to fix this?? I can go back to fastboot mode, but not sure what to do. I did the fastboot erase cache before rebooting my phone!
Look at the notes of section D.
You have to reboot into recovery, clear cache and factory reset.
Sent from my Nexus 4
El Daddy said:
Look at the notes of section D.
You have to reboot into recovery, clear cache and factory reset.
Sent from my Nexus 4
Click to expand...
Click to collapse
I did this though: 13) Erase the cache partition: fastboot erase cache
14) Reboot: fastboot reboot
Okay, and I will try to do that now.
El Daddy said:
Look at the notes of section D.
You have to reboot into recovery, clear cache and factory reset.
Sent from my Nexus 4
Click to expand...
Click to collapse
I booted myself into recovery via fastboot and it shows android laying down with a red triangle and inside that its " ! "
What now?
Press volume up and power at the same time. It will open the menu.
Sent from my Nexus 4
LimitsX said:
I booted myself into recovery via fastboot and it shows android laying down with a red triangle and inside that its " ! "
What now?
Click to expand...
Click to collapse
Flash it again using fastboot and the official Google image. Recent nexus devices are strange, i never had problems before but softbricked both nex4 and 7 just like that. If you can enter fastboot mode all is well though.
Ps. That tutorial, that was the longest one I've seen in my life. Are you aware that Google images contain clickme.bat files? You literally click it and it's done. Just make sure you have fastboot and adb installed. You can extract them from nexus toolkit as well.
If you do wanna make it by hand, also no problem. Download the image from here:https://developers.google.com/android/nexus/images
And type:
fastboot flash bootloader bootloader-maguro-primekk15.img
fastboot reboot-bootloader
fastboot flash radio radio-maguro-i9250xxkk6.img
fastboot reboot-bootloader
fastboot -w update image-yakju-icl53f.zip
Exchange the correct names of course. And make sure you're in fast boot mode.
El Daddy said:
Press volume up and power at the same time. It will open the menu.
Sent from my Nexus 4
Click to expand...
Click to collapse
Do I do that on that screen? I did, and it went into completely black screen.
molesarecoming said:
Ps. That tutorial, that was the longest one I've seen in my life. Are you aware that Google images contain clickme.bat files? You literally click it and it's done. Just make sure you have fastboot and adb installed. You can extract them from nexus toolkit as well.
If you do wanna make it by hand, also no problem. Download the image from here:https://developers.google.com/android/nexus/images
And type:
fastboot flash bootloader bootloader-maguro-primekk15.img
fastboot reboot-bootloader
fastboot flash radio radio-maguro-i9250xxkk6.img
fastboot reboot-bootloader
fastboot -w update image-yakju-icl53f.zip
Exchange the correct names of course. And make sure you're in fast boot mode.
Click to expand...
Click to collapse
Okay, im gonna go and do that! Thanks!
I was trying to mount the sdcard with nexus 4 but it wont do that with CWM and TWRP.
okay I think I just lost access to everything on my phone :|. I am still on TWRP, is there anything I can do with that?
I accidentally wiped the system files ugh. So I lost bootloader which means my phone is empty and useless and im still active on TWRP.
This is what I did in TWRP:
went to WIPE menu and did the following:
1)Wipe Cache
2)Dalvik Cache
3)Factory Reset
4)Wipe System
5)Wipe External storage ( didn't work - failed)
6)Wipe Internal storage (deleted)
So I have a boot loader still ?? or is that gone too? I am still active in TWRP. What are my options to fix this mess I've gotten myself into =\.
molesarecoming said:
Ps. That tutorial, that was the longest one I've seen in my life. Are you aware that Google images contain clickme.bat files? You literally click it and it's done. Just make sure you have fastboot and adb installed. You can extract them from nexus toolkit as well.
If you do wanna make it by hand, also no problem. Download the image from here:https://developers.google.com/android/nexus/images
And type:
fastboot flash bootloader bootloader-maguro-primekk15.img
fastboot reboot-bootloader
fastboot flash radio radio-maguro-i9250xxkk6.img
fastboot reboot-bootloader
fastboot -w update image-yakju-icl53f.zip
Exchange the correct names of course. And make sure you're in fast boot mode.
Click to expand...
Click to collapse
Yeah the thread is verbose, but its more of a tutorial than a "fix my fone nao!!!" Thread.
Efrant wrote it like that so users understand what they are doing.
Sent from my Nexus 4
so basically I have a dead phone?! =\. Anyone..help or point me in the right direction?
Nevermind. I figured it out and fixed it :victory: !!
El Daddy said:
Yeah the thread is verbose, but its more of a tutorial than a "fix my fone nao!!!" Thread.
Efrant wrote it like that so users understand what they are doing.
Sent from my Nexus 4
Click to expand...
Click to collapse
sure, didnt want to apply its not good or anything. its nice to know that google gives you some sort of emergency option, i've used it countless of times.
LimitsX said:
okay I think I just lost access to everything on my phone :|. I am still on TWRP, is there anything I can do with that?
I accidentally wiped the system files ugh. So I lost bootloader which means my phone is empty and useless and im still active on TWRP.
This is what I did in TWRP:
went to WIPE menu and did the following:
1)Wipe Cache
2)Dalvik Cache
3)Factory Reset
4)Wipe System
5)Wipe External storage ( didn't work - failed)
6)Wipe Internal storage (deleted)
So I have a boot loader still ?? or is that gone too? I am still active in TWRP. What are my options to fix this mess I've gotten myself into =\.
Click to expand...
Click to collapse
for the next time, you better learn what all this stuff is and means which you are flashing. i cant help but thinking its dangerous what you're doing there. if you are in twrp you're free to install any rom, your phone is pretty much safe if you can access it. wiping system wont kill your bootloader, system is a partition, your rom gets installed in there. you can wipe it, most roms even do it by default in the installation script. if your bootloader is gone you'll know.
Hi guys
I was trying to update to 4.3 using fastboot and after finishing i got stuck with the google on the screen. So i went on to try it again, this time installing each .img in the zip manually. While i was sending the System.img the usb connection broke and i tried again to no avail. So i was like lets do this again. So i went i started all over again with erasing boot, now the terminal is stuck on that and not going forward. Im out of options. Really need help, im helpless here. Please.
Thank You
Cantacid said:
Hi guys
I was trying to update to 4.3 using fastboot and after finishing i got stuck with the google on the screen. So i went on to try it again, this time installing each .img in the zip manually. While i was sending the System.img the usb connection broke and i tried again to no avail. So i was like lets do this again. So i went i started all over again with erasing boot, now the terminal is stuck on that and not going forward. Im out of options. Really need help, im helpless here. Please.
Thank You
Click to expand...
Click to collapse
Is that a Mac? There is another thread with a guy having issues flashing system.img using a Mac. Not sure if he was able to fix it or not. He was able to flash all the other images just not system.img.
For reference from Efrant's thread on flashing image files if your phone hangs during first boot try this:
Note that some users indicate that they can't get past the X on boot. If this happens to you, reboot into the bootloader and select recovery. Then, when you see the Android with the red exclamation mark, hold power and press volume up to take you to the menu. Wipe cache. If that still doesn't work, boot back into recovery and do a factory reset.
http://forum.xda-developers.com/showthread.php?t=2010312
I had the boot issue when I first flashed the images and just formatting the cache fixed it for me. I later had to do a factory reset as the phone was reporting the wrong storage size, 8 GB instead of 16 GB and the reset fixed it.
Here is the other guys Mac thread, not sure it will help you or not.
http://forum.xda-developers.com/showthread.php?t=2377647
kzoodroid said:
Is that a Mac? There is another thread with a guy having issues flashing system.img using a Mac. Not sure if he was able to fix it or not. He was able to flash all the other images just not system.img.
For reference from Efrant's thread on flashing image files if your phone hangs during first boot try this:
Note that some users indicate that they can't get past the X on boot. If this happens to you, reboot into the bootloader and select recovery. Then, when you see the Android with the red exclamation mark, hold power and press volume up to take you to the menu. Wipe cache. If that still doesn't work, boot back into recovery and do a factory reset.
http://forum.xda-developers.com/showthread.php?t=2010312
I had the boot issue when I first flashed the images and just formatting the cache fixed it for me. I later had to do a factory reset as the phone was reporting the wrong storage size, 8 GB instead of 16 GB and the reset fixed it.
Here is the other guys Mac thread, not sure it will help you or not.
http://forum.xda-developers.com/showthread.php?t=2377647
Click to expand...
Click to collapse
And the thing about cleaning caches is locking and unlocking bootloader does the same. Tried, i cant install recovery and system .img for some reason.
Thank you for the quick reply, seems the like the guy is having the same issue. Will post it there as well.
The issue is to fastboot the system.img
Cantacid said:
And the thing about cleaning caches is locking and unlocking bootloader does the same. Tried, i cant install recovery and system .img for some reason.
Thank you for the quick reply, seems the like the guy is having the same issue. Will post it there as well.
The issue is to fastboot the system.img
Click to expand...
Click to collapse
I see you are in the other thread too but I will post this here also.
According to this thread when using a Mac you don't flash the system or kernel (boot) images.
http://forum.xda-developers.com/showthread.php?t=2377691
kzoodroid said:
I see you are in the other thread too but I will post this here also.
According to this thread when using a Mac you don't flash the system or kernel (boot) images.
http://forum.xda-developers.com/showthread.php?t=2377691
Click to expand...
Click to collapse
Yeah you do. I just did this on my Mac for my Nexus 4 and Nexus 7 last night with absolutely no issues.
The procedure I used is as follows...
1.1) Download the factory image and ensure all .img files are extracted to the "platform-tools" folder
1.2) Boot phone into fastboot mode by powering it down then holding volume down/power at the same time until the fastboot screen appears
2) Plug the phone into the computer via USB cable
3) Open terminal and type: fastboot devices (if it recognizes your phone's serial number you are ready to move forward)
4) Reboot by typing: fastboot reboot-bootloader (I do this just to test the connection but it's not 100% necessary)
5) Flash the bootloader: fastboot flash bootloader /Users/kevin/Desktop/Android/sdk/platform-tools/bootloader.img
6) Reboot: fastboot reboot-bootloader
7) Flash the radio: fastboot flash radio /Users/kevin/Desktop/Android/sdk/platform-tools/radio.img
8) Reboot: fastboot reboot-bootloader
9) Flash the system partition: fastboot flash system /Users/kevin/Desktop/Android/sdk/platform-tools/system.img
10) Flash the data partition: fastboot flash userdata /Users/kevin/Desktop/Android/sdk/platform-tools/system.img (Note: this command will wipe your device)
11) Flash the kernel/ramdisk: fastboot flash boot /Users/kevin/Desktop/Android/sdk/platform-tools/boot.img
12) Flash the recovery partition: fastboot flash recovery /Users/kevin/Desktop/Android/sdk/platform-tools/recovery.img
13) Erase the cache partition: either a) fastboot erase cache OR b) fastboot format cache <<== (the second option seems to work better for most people and it's what I used)
14) Reboot: fastboot reboot
After completing step 14 your phone should reboot to the initial setup screen. If you follow those steps vigorously you won't have any issues. If it doesn't work you did something wrong and should start over. If it doesn't work on a second try then I'd re-download the system image from HERE again just to be sure the .img files you are ultimately trying to use aren't corrupt somehow.
sn0warmy said:
Yeah you do. I just did this on my Mac for my Nexus 4 and Nexus 7 last night with absolutely no issues.
The procedure I used is as follows...
1.1) Download the factory image and ensure all .img files are extracted to the "platform-tools" folder
1.2) Boot phone into fastboot mode by powering it down then holding volume down/power at the same time until the fastboot screen appears
2) Plug the phone into the computer via USB cable
3) Open terminal and type: fastboot devices (if it recognizes your phone's serial number you are ready to move forward)
4) Reboot by typing: fastboot reboot-bootloader (I do this just to test the connection but it's not 100% necessary)
5) Flash the bootloader: fastboot flash bootloader /Users/kevin/Desktop/Android/sdk/platform-tools/bootloader.img
6) Reboot: fastboot reboot-bootloader
7) Flash the radio: fastboot flash radio /Users/kevin/Desktop/Android/sdk/platform-tools/radio.img
8) Reboot: fastboot reboot-bootloader
9) Flash the system partition: fastboot flash system /Users/kevin/Desktop/Android/sdk/platform-tools/system.img
10) Flash the data partition: fastboot flash userdata /Users/kevin/Desktop/Android/sdk/platform-tools/system.img (Note: this command will wipe your device)
11) Flash the kernel/ramdisk: fastboot flash boot /Users/kevin/Desktop/Android/sdk/platform-tools/boot.img
12) Flash the recovery partition: fastboot flash recovery /Users/kevin/Desktop/Android/sdk/platform-tools/recovery.img
13) Erase the cache partition: either a) fastboot erase cache OR b) fastboot format cache <<== (the second option seems to work better for most people and it's what I used)
14) Reboot: fastboot reboot
After completing step 14 your phone should reboot to the initial setup screen. If you follow those steps vigorously you won't have any issues. If it doesn't work you did something wrong and should start over. If it doesn't work on a second try then I'd re-download the system image from HERE again just to be sure the .img files you are ultimately trying to use aren't corrupt somehow.
Click to expand...
Click to collapse
In the other walk through flash system image and boot image is replaced by "./fastboot update image-occam-jwr66v.zip". This could help those who are having problems flashing the system image file. I've also seen this method used for windows in that all you flash is the bootloader image then the update image and your done.
-w is to clear the userdata, but the problem is its not pushing the system.img on the phone! Tried without -w and yet the same issue! I have restored my previous rom and madea nandroid for 4.2.2 stock! Might go back to that and try updating ota! Can somebody confirm if i have to lock bootloader and lose root to get an update!
I have no clue why the same steps work for 4.2.2 but not 4.3 image files!
Sent from my Nexus 4 using Tapatalk 4 Beta
One thing I don't think anyone has mentioned (which may actually be the core solution to this problem for everyone) is that you need to update your SDK Platform from 17 to 18 and you need to install "Android Support Repository" in order for 4.3 to properly flash. To do this open terminal and paste the path to the "android" executable file found under sdk/tools. My path was:
/Users/kevin/Desktop/Android/sdk/tools/android
After pasting the appropriate path into terminal hit enter. This will open the SDK Manager. Once SDK Manager is open it will ask to update outdated drivers. One of the drivers being updated is SDK Platform. Before hitting the update button scroll down to the 'Extras' folder and check the box next to "Android Support Repository". Now hit the update button.
After doing this, reboot the computer (may or may not be necessary) and try flashing again by following the steps I provided in post #5. Let me know if that solved it.
Well, i may try that! But as if now, went to bootcamp, installed drivers and sideloaded 4.3. I may still try updating sdk, just in case i may neeed to do this again!
Where is this sdk/tools?
Sent from my Nexus 4 using Tapatalk 4 Beta
Cantacid said:
Well, i may try that! But as if now, went to bootcamp, installed drivers and sideloaded 4.3. I may still try updating sdk, just in case i may neeed to do this again!
Where is this sdk/tools?
Sent from my Nexus 4 using Tapatalk 4 Beta
Click to expand...
Click to collapse
sdk/tools is located wherever you extracted the .zip file to. In my case I just put it all in a parent folder on the desktop called "Android".
Hello guys,
I had my phone rooted with latest twrp. I flashed stock+ rom with Franco Kernel 25r and the A.R.I.S.E file for better sound. I've done the same set up minus the ARISE file and never had an issue.
well to my luck it kept bootlooping and I wasn't able to get back into my custom recovery. When I got home and got my hands on a pc I did a factory reset by manually flashing stock google img . I even used a couple tools since I ran out of ideas and still no luck.
I'm able to do anything through fastboot but I can't seem to get into my recovery at all.
Any ideas or tips of where I should go next?
Not a Hardbrick
As long as you can get to the bootloader mode, you haven't hard bricked your device. Hardbricking is a point where you cant boot your device and in to bootloader so there is no way to flash your device to a useable state.
Now as you can boot to the bootloader, just fastboot boot twrp.img and if you have a factory image zip, copy it in your device internal storage and flash it. Its that simple, provided you are already using an unencrypted boot.img in your current setup. Or else the next step is to flash an decrypted boot.img(you will loose all your userdata and internal storage data.). There are ways to mount the the encrypted filesystem if you are using a pin or password combo with your fingerprint. But without it its a bit more trickier so just for ease and if you dont have any inseparable data in your device now just flash a decrypted boot.img and then you can easily mount your internal storage to your pc and copy the factory image and the rest you already know..
At this point, I'd recommend a full reset.
Flash all the images in the latest Android M factory image (don't flash DP5 or similar N based ROMs): Recovery, Boot, System, Bootloader, Radio, everything.
Once you get stabilized and back into a working phone, then start rooting and messing around with kernels and what not.
To be completely honest, I've flashed nearly every ROM for the 6p, as well as my other Nexus devices, Galaxy phones, Sony phones, and no-name brands and none of those ultra modified kernels did any noticeable change. I tried the F2FS, NTFS, etc file system changes, tweaks to the governors and IO's, all of that, and found the stock kernel was the best. If a kernel with a different IO Scheduler worked even 10% better than the current implementation, and was just as stable, don't you think the Google/Android Engineers would've pushed that to live?
Currently running Pure Nexus July 23rd Update, everything stock that comes with it, Systemless Root/XPosed, and Viper4Android and have never had a performance or stability issue. I'd recommend you do the same.
leninmon said:
As long as you can get to the bootloader mode, you haven't hard bricked your device. Hardbricking is a point where you cant boot your device and in to bootloader so there is no way to flash your device to a useable state.
Now as you can boot to the bootloader, just fastboot boot twrp.img and if you have a factory image zip, copy it in your device internal storage and flash it. Its that simple, provided you are already using an unencrypted boot.img in your current setup. Or else the next step is to flash an decrypted boot.img(you will loose all your userdata and internal storage data.). There are ways to mount the the encrypted filesystem if you are using a pin or password combo with your fingerprint. But without it its a bit more trickier so just for ease and if you dont have any inseparable data in your device now just flash a decrypted boot.img and then you can easily mount your internal storage to your pc and copy the factory image and the rest you already know..
Click to expand...
Click to collapse
First of all thank you for the response.
I've tried flashing the most current twrp and it seems to go through fine on fast boot but when I actually try to get into recovery from the device it will boot loop and just keep doing that.
How can I get into the phones storage through fastboot?
Where can I get the factory zip?
it feels as if everything seems to go good through fastboot but when I actually try to boot the phone nothing seems to work.
Wiltron said:
At this point, I'd recommend a full reset.
Flash all the images in the latest Android M factory image (don't flash DP5 or similar N based ROMs): Recovery, Boot, System, Bootloader, Radio, everything.
Once you get stabilized and back into a working phone, then start rooting and messing around with kernels and what not.
To be completely honest, I've flashed nearly every ROM for the 6p, as well as my other Nexus devices, Galaxy phones, Sony phones, and no-name brands and none of those ultra modified kernels did any noticeable change. I tried the F2FS, NTFS, etc file system changes, tweaks to the governors and IO's, all of that, and found the stock kernel was the best. If a kernel with a different IO Scheduler worked even 10% better than the current implementation, and was just as stable, don't you think the Google/Android Engineers would've pushed that to live?
Currently running Pure Nexus July 23rd Update, everything stock that comes with it, Systemless Root/XPosed, and Viper4Android and have never had a performance or stability issue. I'd recommend you do the same.
Click to expand...
Click to collapse
Thanks for the reply.
I've done the manual flashing already and flashed everything single item the most current factory image. Everything seemed to have gone through okay but when I rebooted the phone it was back to 0.
I'm actually considering getting rid of the phone now since it is my daily =/
Format each partition before flashing.
fastboot format <partition>
wait until it's done, then
fastboot flash <partition> <image>
Some partitions can't be formatted, which there are ways around, but try this first.
Just get to bootloader mode and try booting the twrp.img
fastboot boot twrp.img
From the twrp ui, go to advanced wipe and format your storage.
To mount the internal storage on your PC, enable mtp from twrp screen.
If U are using a decrypted boot.img, it will easily mount ur internal storage. Or try flashing a decrypted boot.img
fastboot flash boot boot.img
Then try the above again..
leninmon said:
Just get to bootloader mode and try booting the twrp.img
fastboot boot twrp.img
From the twrp ui, go to advanced wipe and format your storage.
To mount the internal storage on your PC, enable mtp from twrp screen.
If U are using a decrypted boot.img, it will easily mount ur internal storage. Or try flashing a decrypted boot.img
fastboot flash boot boot.img
Then try the above again..
Click to expand...
Click to collapse
I flashed the twrp.img and it went through successfully at least on the computer it did but when the phone actually tries to get into recovery (twrp) it will start to boot loop and keep on doing that. I tried both an encrypted and decrypted boot img but it still made no difference.
I'm really going crazy over this
Wiltron said:
Format each partition before flashing.
fastboot format <partition>
wait until it's done, then
fastboot flash <partition> <image>
Some partitions can't be formatted, which there are ways around, but try this first.
Click to expand...
Click to collapse
I just tried this and had no luck =/....the phone wont get past the google boot screen
You need to explain more on what you actually tried here.
Just download the latest factory image and try to flash the latest bootloader using fastboot.
Then boot to the bootloader and try formating the device. Not wiping
Then you have to
fastboot boot twrp.img
I believe you have only tried wiping not formating. I faced similar issue before. But once I flashed a decrypted boot.img, it cleared the user data and then I was able to get to twrp.
Maybe your twrp img is corrupted if this didn't work.
leninmon said:
You need to explain more on what you actually tried here.
Just download the latest factory image and try to flash the latest bootloader using fastboot.
Then boot to the bootloader and try formating the device. Not wiping
Then you have to
fastboot boot twrp.img
I believe you have only tried wiping not formating. I faced similar issue before. But once I flashed a decrypted boot.img, it cleared the user data and then I was able to get to twrp.
Maybe your twrp img is corrupted if this didn't work.
Click to expand...
Click to collapse
i just flashed the latest bootloader from the most recent factory image and i did the command format user data and then tried the fastboot boot twrp and the phone will then try to get into recovery, the google logo comes up lasts a couple seconds and boot loops all over to where is says my phone cant be check for corruption
By now i should have been able to get into recovery and it wont go through
edgarted said:
i just flashed the latest bootloader from the most recent factory image and i did the command format user data and then tried the fastboot boot twrp and the phone will then try to get into recovery, the google logo comes up lasts a couple seconds and boot loops all over to where is says my phone cant be check for corruption
By now i should have been able to get into recovery and it wont go through
Click to expand...
Click to collapse
download a factory image and run the flash all file...... it should reboot your phone after 5 minutes and the issue should be resolved.. a hard brick would be a device that does nothing.... in this case i believe that you just didnt do something right.
Then download the latest factory image and extract it
fastboot flash radio.img
fastboot flash bootloader.img
& do a fastboot update the rest archive file as it is
This will flash the rom via fastboot& U don't have to rely on TWRP or CWM
i42o said:
download a factory image and run the flash all file...... it should reboot your phone after 5 minutes and the issue should be resolved.. a hard brick would be a device that does nothing.... in this case i believe that you just didnt do something right.
Click to expand...
Click to collapse
I was really really hoping this would help. I erase/formated everything before flashing anything. I then ran the flash-all file and it took a couple of minutes and it said finished on the command box and my phone restarted and went into the white google logo and rebooted again with a bootloop. I waited around 15 minutes hoping it would start but it didn't.
It honestly feels as if the phone is not processing the full commands but on the pc it seems to go through successfully
is there a way to force an install of a rom and see if maybe a dirty flash over the stock one will allow it to start up?
leninmon said:
Then download the latest factory image and extract it
fastboot flash radio.img
fastboot flash bootloader.img
& do a fastboot update the rest archive file as it is
This will flash the rom via fastboot& U don't have to rely on TWRP or CWM
Click to expand...
Click to collapse
i know how to flash the radio and bootloader but how do i do a fastboot update?
edgarted said:
i know how to flash the radio and bootloader but how do i do a fastboot update?
Click to expand...
Click to collapse
Just unzip the factory image and there U can see the flash shell script files too. Open them in a text editor & U could see the exact command. In a factory img, they also do the same thing via script files. Flashing the radio & bootloader & updating the rest archive
so this is what I've done
I've manually flashed every file needed for the factory image from google.
I also tried wugfresh tool kit which is great but didn't help me much. I flashed stock recovery and treid to boot into to and nothing. I flashed a customer recovery and nothing.
It always does the same thing
the screen that says my phone can't be checked for corruption and then the google sign comes up stays on for a couple seconds and then it bootloops to the can't be checked for corruption.
I try to get into recovery using fastboot commands and the phone does the same exact thing.
I was even able to lock and relock the bootloader and I was able to successfully flash everything at least that is what it showed on the computer
so ive read almost every thread that had to do with bricking and I feel like an expert now but im starting to think it is done =/
edgarted said:
so this is what I've done
I've manually flashed every file needed for the factory image from google.
I also tried wugfresh tool kit which is great but didn't help me much. I flashed stock recovery and treid to boot into to and nothing. I flashed a customer recovery and nothing.
It always does the same thing
the screen that says my phone can't be checked for corruption and then the google sign comes up stays on for a couple seconds and then it bootloops to the can't be checked for corruption.
I try to get into recovery using fastboot commands and the phone does the same exact thing.
I was even able to lock and relock the bootloader and I was able to successfully flash everything at least that is what it showed on the computer
so ive read almost every thread that had to do with bricking and I feel like an expert now but im starting to think it is done =/
Click to expand...
Click to collapse
Hey there. First off make sure to unlock again your bootloader. Then you may follow post # 10 of @Heisenberg 's flashing guide for our device.
First images to flash would be bootloader and radio. First flash bootloader, then make sure to issue the command adb reboot-bootloader. Then afterwards once the phone has rebooted back to bootloader, flash radio, then again do the adb reboot-bootloader again.
Once the phone is again back to bootloader flash the rest of the images except userdata. For the boot.img and recovery.img, flash the stock ones-don't use the decrypted boot.img and don't flash the twrp.img yet. Once all necessary images have been flashed issue the reboot-booloater command one more time, then on the bootloader screen choose the reboot option. Wait anywhere from 3-10 minutes for the phone to load. Let us know how it goes for you.
blitzkriegger said:
Hey there. First off make sure to unlock again your bootloader. Then you may follow post # 10 of @Heisenberg 's flashing guide for our device.
First images to flash would be bootloader and radio. First flash bootloader, then make sure to issue the command adb reboot-bootloader. Then afterwards once the phone has rebooted back to bootloader, flash radio, then again do the adb reboot-bootloader again.
Once the phone is again back to bootloader flash the rest of the images except userdata. For the boot.img and recovery.img, flash the stock ones-don't use the decrypted boot.img and don't flash the twrp.img yet. Once all necessary images have been flashed issue the reboot-booloater command one more time, then on the bootloader screen choose the reboot option. Wait anywhere from 3-10 minutes for the phone to load. Let us know how it goes for you.
Click to expand...
Click to collapse
Hello and thank you for helping.
I tried this method a couple of minutes ago. I flashed them this same way
fastboot flash bootloader C:\angler\images\bootloader-angler-angler-xx.xx.img
fastboot reboot-bootloader
fastboot flash radio C:\angler\images\radio-angler-angler-xx.xx.img
fastboot reboot-bootloader
fastboot flash boot C:\angler\images\boot.img
fastboot erase cache
fastboot flash cache C:\angler\images\cache.img
fastboot flash recovery C:\angler\images\recovery.img
fastboot flash system C:\angler\images\system.img
fastboot flash vendor C:\angler\images\vendor.img
It does the same exact thing it will try and restart the phone, the message that says it can't be checked for corruption the google logo comes up and it repeats it self non stop.
This is what doesn't make sense to me.
This is the file that I had flashed through twrp when it was working fine
Leviticus 1.3 - http://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709
edgarted said:
Hello and thank you for helping.
I tried this method a couple of minutes ago. I flashed them this same way
fastboot flash bootloader C:\angler\images\bootloader-angler-angler-xx.xx.img
fastboot reboot-bootloader
fastboot flash radio C:\angler\images\radio-angler-angler-xx.xx.img
fastboot reboot-bootloader
fastboot flash boot C:\angler\images\boot.img
fastboot erase cache
fastboot flash cache C:\angler\images\cache.img
fastboot flash recovery C:\angler\images\recovery.img
fastboot flash system C:\angler\images\system.img
fastboot flash vendor C:\angler\images\vendor.img
It does the same exact thing it will try and restart the phone, the message that says it can't be checked for corruption the google logo comes up and it repeats it self non stop.
This is what doesn't make sense to me.
This is the file that I had flashed through twrp when it was working fine
Leviticus 1.3 - http://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709
Click to expand...
Click to collapse
This is weird. What version of the stock factory images did you flash? I've been using leviticus 1.3 since it came out and when i was still on stock rom. I switched over to cm builds and have been flashing every nightly since the 7/24th build, and in the process repeatesly reflashing the aound mod along, and i've had zero issues with the phone booting afterwards.
This is the whole situation:
I have Pure Nexus installed on my 6P, running great for months. Suddenly yesterday it rebooted while I was using it and sticking in a bootloop. "No problem", I thought, and wanted to reboot into recovery - but nope, can't access it anymore. So I tried to reflash the recovery when I got home, but I only get errorors
When using the command adb devices the line just stays blank. The same with fastboot commands, besides "Fastboot devices"
After messing around a couple hours with the drivers and so on, I managed to somehow get the fastboot command working again. But no sign for the ADB commands, probably because I didn't turn on USB-debugging.
I am now at the point, where I have reflashed Stock Android with the Nexus Root Toolkit and managed to get back into stock android recovery, but still can't get TWRP to boot. I didn't want to delete my personal data, but I saw no other way and formatted /data in stock recovery. But the problem with the bootloop is still there.
It's not the classic bootloop, it boots as far as the Google Logo, then shuts itself down and begins again. I have now reached the point where I have to say, that the hardware might be damaged too. I'd love to somehow get access to the internal storage at least, but I can't without a working ADB.
Reinstalled TWRP with every available version, none of them worked. I am able to access stock Android recovery, but adb commands aren't working from here anyway.
Is there an option to fix the recovery mode? If I could get this working, the rest would be easy for me.
Edit: The reboot looks like in this Link. Only difference is, my device doesn't even the reach the dots.
StarShoot97 said:
This is the whole situation:
I have Pure Nexus installed on my 6P, running great for months. Suddenly yesterday it rebooted while I was using it and sticking in a bootloop. "No problem", I thought, and wanted to reboot into recovery - but nope, can't access it anymore. So I tried to reflash the recovery when I got home, but I only get errorors
When using the command adb devices the line just stays blank. The same with fastboot commands, besides "Fastboot devices"
After messing around a couple hours with the drivers and so on, I managed to somehow get the fastboot command working again. But no sign for the ADB commands, probably because I didn't turn on USB-debugging.
I am now at the point, where I have reflashed Stock Android with the Nexus Root Toolkit and managed to get back into stock android recovery, but still can't get TWRP to boot. I didn't want to delete my personal data, but I saw no other way and formatted /data in stock recovery. But the problem with the bootloop is still there.
It's not the classic bootloop, it boots as far as the Google Logo, then shuts itself down and begins again. I have now reached the point where I have to say, that the hardware might be damaged too. I'd love to somehow get access to the internal storage at least, but I can't without a working ADB.
Reinstalled TWRP with every available version, none of them worked. I am able to access stock Android recovery, but adb commands aren't working from here anyway.
Is there an option to fix the recovery mode? If I could get this working, the rest would be easy for me.
Edit: The reboot looks like in this Link. Only difference is, my device doesn't even the reach the dots.
Click to expand...
Click to collapse
If you can get fastboot commands to work, just flash the factory image per Heisenberg's guide. Toolkits are more trouble than help. Return it to fresh stock with a full wipe and start fresh.
Sent from my Nexus 6P using Tapatalk
StarShoot97 said:
Edit: The reboot looks like in this Link. Only difference is, my device doesn't even the reach the dots.
Click to expand...
Click to collapse
That vid you linked is an N5 with a stuck power button. It'll do the same thing and reboot recovery as well. It could be your issue but if it is it'll be the first stuck power button I've heard of on a 6P.
When you access fastboot does it stay on in fastboot or does it reboot from it?
theesotericone said:
That vid you linked is an N5 with a stuck power button. It'll do the same thing and reboot recovery as well. It could be your issue but if it is it'll be the first stuck power button I've heard of on a 6P.
When you access fastboot does it stay on in fastboot or does it reboot from it?
Click to expand...
Click to collapse
I said it looks like this, I did not say the button is the reason
When I access fastboot it stays there until I manually select an option
ultyrunner said:
If you can get fastboot commands to work, just flash the factory image per Heisenberg's guide. Toolkits are more trouble than help. Return it to fresh stock with a full wipe and start fresh.
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
This is my last viable option, as I'd like to somehow pull my stuff from the phone. Afterwards I'd clean install it anyway.
StarShoot97 said:
This is my last viable option, as I'd like to somehow pull my stuff from the phone. Afterwards I'd clean install it anyway.
Click to expand...
Click to collapse
You contradict yourself a bit so it is difficult to help you. You got to stock recovery but you can't boot into TWRP? If you have stock recovery, of course you can't boot into TWRP. You have wiped your data but you still want to preserve your data ... Huh?
Your phone isn't working so just nuke and pave with the command line and avoid toolkits. They are sometimes part of the problem.
Sent from my Nexus 6P using Tapatalk
ultyrunner said:
You contradict yourself a bit so it is difficult to help you. You got to stock recovery but you can't boot into TWRP? If you have stock recovery, of course you can't boot into TWRP. You have wiped your data but you still want to preserve your data ... Huh?
Your phone isn't working so just nuke and pave with the command line and avoid toolkits. They are sometimes part of the problem.
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
When stock recovery is installed, I am from time to time able to access it (most of the times it just ends in a bootloop)
If I flash TWRP I can't access it, no matter how often I try
I have factory reset my phone, the stuff on the internal is still there and I want to reach this, as I have my chats, SMS, university stuff and so on backed up on the internal storage
I am trying everything - all the regular adb methods, toolkits, every driver, nothing is working
Sorry if you don't understand my situation, but I am in a pinch right now
You said you have fastboot working?
Download the factory image zip file. Extract it. Extract the zip file from inside that as well. Move the img files to your platform-tools folder.
Reboot your phone to the bootloader. Hold volume down+power from a powered off state.
Plug into PC, open command line from your platform-tools folder.
Type, fastboot devices
Does it show your serial number? If so, start flashing the following images;
Bootloader-angler-angler-xx.xx.img, radio-angler-angler-xx.xx.img, vendor.img, system.img, boot.img, recovery.img
Flash with fastboot.
Code:
fastboot flash bootloader bootloader-angler-angler-xx.xx.img
Code:
fastboot flash radio radio-angler-angler-xx.xx.img
(Substitute "xx.xx" for the version number shown in the img files you unpacked)
Reboot bootloader
Code:
fastboot flash vendor vendor.img
Code:
fastboot flash system system.img
Code:
fastboot flash boot boot.img
Code:
fastboot flash recovery recovery.img
Once you do that, boot to stock recovery and cache wipe. Reboot and you're stock. If you're still not able to boot after that post back.
Edit: You said you wanted to avoid flashing factory images to keep internal storage in tact. Do it this way and you can have your cake and eat it too.
Edit2: wrong, see my latest reply
RoyJ said:
You said you have fastboot working?
Download the factory image zip file. Extract it. Extract the zip file from inside that as well. Move the img files to your platform-tools folder.
Reboot your phone to the bootloader. Hold volume down+power from a powered off state.
Plug into PC, open command line from your platform-tools folder.
Type, fastboot devices
Does it show your serial number? If so, start flashing the following images;
Bootloader-angler-angler-xx.xx.img, radio-angler-angler-xx.xx.img, vendor.img, system.img, boot.img, recovery.img
Flash with fastboot.
Code:
fastboot flash bootloader bootloader-angler-angler-xx.xx.img
Code:
fastboot flash radio radio-angler-angler-xx.xx.img
(Substitute "xx.xx" for the version number shown in the img files you unpacked)
Reboot bootloader
Code:
fastboot flash vendor vendor.img
Code:
fastboot flash system system.img
Code:
fastboot flash boot boot.img
Code:
fastboot flash recovery recovery.img
Once you do that, boot to stock recovery. Perform a factory reset again like you already mentioned you did as well as a cache wipe. Reboot and you're stock. If you're still not able to boot after that post back.
Edit: You said you wanted to avoid flashing factory images to keep internal storage in tact. Do it this way and you can have your cake and eat it too.
Click to expand...
Click to collapse
I did this already exactly like you wrote, did it again now, and I am still stuck in the reboot loop (boots up to Google Logo, then shuts itself down; repeat)
Can't reach recovery mode either
You said you had access to stock recovery before?
You already did this?
---------- Post added at 12:17 PM ---------- Previous post was at 12:16 PM ----------
If you flashed the factory images and still boot looping you may need to RMA.
Did you restore a TWRP backup?
Edit: Sorry, it's late and I have no sleep. I was wrong. I was thinking TWRP. Factory Reset from TWRP before my steps will keep internal storage I'm tact. Factory Reset from stock recovery will wipe internal storage. Everything. You mentioned you did that already from stock recovery before i made my reply. Your data is already gone as soon as you did that. If not, your emmc is likely corrupted and you need to RMA.
Fastboot twrp 3.0.0-0 then try to access it
RoyJ said:
You said you had access to stock recovery before?
You already did this?
---------- Post added at 12:17 PM ---------- Previous post was at 12:16 PM ----------
If you flashed the factory images and still boot looping you may need to RMA.
Did you restore a TWRP backup?
Edit: Sorry, it's late and I have no sleep. I was wrong. I was thinking TWRP. Factory Reset from TWRP before my steps will keep internal storage I'm tact. Factory Reset from stock recovery will wipe internal storage. Everything. You mentioned you did that already from stock recovery before i made my reply. Your data is already gone as soon as you did that. If not, your emmc is likely corrupted and you need to RMA.
Click to expand...
Click to collapse
Yes, I think so too. I flashed the phone with the full Stock image, the bootloop is still there.
Looks like my precious is dead
At least I have my most important data like phonenumbers, pictures and SMS saved to the cloud
Gonna RMA it tomorrow
Goodybe my precious, I hope you'll be fine :crying:
Got my device back today, the mainboard was damaged, so I had no chance to get my data from the phone
Hey, at least my warranty has been renewed 'till 2018
StarShoot97 said:
This is the whole situation:
I have Pure Nexus installed on my 6P, running great for months. Suddenly yesterday it rebooted while I was using it and sticking in a bootloop. "No problem", I thought, and wanted to reboot into recovery - but nope, can't access it anymore. So I tried to reflash the recovery when I got home, but I only get errorors
When using the command adb devices the line just stays blank. The same with fastboot commands, besides "Fastboot devices"
After messing around a couple hours with the drivers and so on, I managed to somehow get the fastboot command working again. But no sign for the ADB commands, probably because I didn't turn on USB-debugging.
I am now at the point, where I have reflashed Stock Android with the Nexus Root Toolkit and managed to get back into stock android recovery, but still can't get TWRP to boot. I didn't want to delete my personal data, but I saw no other way and formatted /data in stock recovery. But the problem with the bootloop is still there.
It's not the classic bootloop, it boots as far as the Google Logo, then shuts itself down and begins again. I have now reached the point where I have to say, that the hardware might be damaged too. I'd love to somehow get access to the internal storage at least, but I can't without a working ADB.
Reinstalled TWRP with every available version, none of them worked. I am able to access stock Android recovery, but adb commands aren't working from here anyway.
Is there an option to fix the recovery mode? If I could get this working, the rest would be easy for me.
Edit: The reboot looks like in this Link. Only difference is, my device doesn't even the reach the dots.
Click to expand...
Click to collapse
Try flashing TWRP 3.0.2-3 or boot into twrp through fastboot. Using
fastboot boot recovery <twrp filename>.img
I think booting to twrp using this command will work.
And here's the link to Twrp 3.0.2-3 , as its not available on Official Twrp page.
https://idlekernel.com/twrp/nexus/twrp-3.0.2-3-angler.img
I had the same problem with my 5X, nothing worked I tried every possible solution described above and more. Nothing. I figured out that there was nothing to loose and followed directions from YouTube videos (links below) and it worked. Used heat gun at max temp for about 2 mins from each side. It's been about 12 hours since then, phone works flawlessly. Here are the links:
https://www.youtube.com/watch?v=SD25mdrgAys
https://www.youtube.com/watch?v=Cqh2x-TGnCY
Be careful handling the motherboard after you heat the first side, let it cool first before you start working on the second side. The same with the second side do not pick it up until it's cool.
5X, Pure Nexus Rom 7.1.2 June 5th security update, Elemental X Kernel,
has anyone found solution to this?????
First of all, I must note that this is my first time flashing a phone, so don't rely too much on my knowledge on the subject, please!
So...
I started by unlocking the OEM and USB debugging from the developer menu, then downloading and extracting ADB tools to my PC. I unlocked my A1 just fine. I then proceeded to install twrp on my phone by using the "fastboot flash boot twrp.img" (as it was named in my ADB folder) and "fastboot reboot" commands. It should be noted that the "fastboot flash recovery twrp.img" did NOT work in the previous step so I have to use the "boot" command instead. TWRP was working perfectly, and I wiped the data from my system and data slots from twrp (there was no cache option in the menu except dalvik which I also wiped).
After that, I added tissot's evolution_tissot-ota-td1a.221105.001-11121815-unsigned.zip and ProjectElixir_3.2_tissot-13.0-20221102-0447-BETA-OFFICIAL.zip to my phone via fastboot after download. Both were flashed successfully (I didn't try to do them both at the same time, of course. One didn't work and stuck on the boot screen for project elixir, so I tried the other after wiping the older one). Both were stuck on the boot screen for their respective teams.
EDIT: Tried it with the stock version PKQ1.180917.001.V10.0.18.0.PDHMIXM.zip, and it worked! Any idea what the issue is here?
If anyone needs more info, I would be glad to provide it. A little help goes a long way!
Cheers