Hi,
I need help with my android smartwatch z3g.
It is with mtk 6572.
I tried to change my imei and wifi mac address for being able to install whatsapp as a second phone with the same account.
After reboot, the system stuck at the the opening logo and doesn't boot up.
I have a backup I made with mtk droid tools.
I tried to recover it using sp flash tool and the download to the watch succeeded but the problem haven't been solved. The watch still stuck at boot.
Is it because the imei was changed? if so, how can I fix it?
appreciate any help..
Wrong forum
I have this Lenovo A328 which suddenly had multiple and continuous gapps crashes. I tried to do a factory reset but the problem still existed. I decided to flash the stock rom using SP Flash Tool. Flashing the stock rom succeeded but then after, the device does not charge nor boot up. It does not even respond to vol up(or down) + power which brings up a menu for testing the device(not recovery). I tried to format it first before flashing but the result is still the same. I also tried flashing stock rom from different source. Any idea on this one?
Update
I tried to flash a stock rom on my Lenovo A328 with SP Flash Tool but the process was interrupted and now after I flashed the stock rom successfully, the phone won't charge nor boot, not even to recovery. I noticed in my EMMC Flash that the sizes of GP1 - 4 are all 0x0.
I found a solution in here,
http://forum.xda-developers.com/show....php?t=2792667
It says that I have to flash the rom using DOWNLOAD first and then flash it again with FIRMWARE UPGRADE. I'm already at the FIWMWARE UPGRADE process but I got this error
Failed to get PMT info.
Click to expand...
Click to collapse
Can anyone please help me fix the phone? It will be highly appreciated.
Hi,
You can try format all+download option of spflashtool. I can send you the firmware for Lenovo a328 if you want.
Same problem here, any advice ?
You can try format all+download option of spflashtool. I can send you the firmware for Lenovo a328 if you want. Yes i want.
Lenovo a328
Plz send the firmware for Lenovo a328
Hi All,
I have the same problem
did you find any solution?
I want the firmware for Lenovo a328
lenovo a328 not turning on even I successfully flash sa firmware
same problem here.
someone can help?
need some help to resurrect my lenovo a328.
if I format it, there's an error 5073.
Hi, I am having the same problem. Could you help?
Hello everyone!
I am facing the same problem!!!
Tried almost all the solutions suggested on different sites or forums, nothing works, still no charge and no start...
Change the PC, the USB cables, drivers, ROM's, you name it... Someone said this MTK devices are hard to brick but still, why we cannot revive our devices??? Hardware failure? Not really according to some technicians as long your phone is detected by the pc in device manager, the phone CAN be "unbricked".
SO, we are missing something, we doing something wrong???
We need help.... SOMEONE???
please send me the firmware
I have the same problem about my lenovo a328. After flashing, it's not booting and turning on. It's not even charging. So what I did is I tried to firmware upgrade it and I got this ''failed to get PMT info'' alert. Someone know how to revive this phone?
I got 2 phones and they've bricked themselves
Hi,
I got 2 Lenovo A328s and they've bricked themselves, having the same symptoms.
I can get them to boot in Recovery, and I am waiting to download an image to sideload with ADB, which seems to work.
One of them was still in use, but had software glitches, like the camera driver not working in any app.
The other one was replaced 10 months ago, but after long time, it also bricked.
I haven't attempted any flash of new firmware.
I have the same problem, the phone isn't charging and I can't use vol up+ power buttons.
Can you send me the software please and some instructions?
Model : Yureka A5510 [not plus]
my phone was working perfectly .. no issues at all.. after JIO 4g launch. I read some of the articles to enable VoLTE without using JIOVoice application. I though to enable VoLTE.. and tried to install a firmware for my Yureka A5510.
and I hardbricked my phone. Just redlight blink on top left cornor. NO BOOT, NO FASTBOOT, NO RECOVERY
I googled. and found some article to unbrick by flashing eMMC image on SD card to bring it in to fastboot mode. (using six pins on the motherboard and key comnbination)
finally I am succeed to flash the STOCK firmware by FASTBOOT.
But I lost the IMEI, so NO network.. again googled a lot and I made the IMEI fix with the help of QXDM Tool.
now the problem is with the touch screen. it works fine after a restart untill I press the Lock / unlock button.
After Unlock the touch pointer shows on different locatoin and lower 1/4 part doesn't respond.
I enabled developer mode and enable show touch points... that tells me the location of the touch.
I AM PRETTY MUCH SURE IT IS NOT A HARDWARE ISSUE, BECAUSE IF WORKS FINE IN RECOVERY MODE(CWM RECOVERY) AND ONCE AFTER EVERY RESTART.
.. CAN YOU HELP ME .. PLEASE.
PLEASE TAKE SOME TIME AND READ IT.
I have same Yureka model YU5510A and i soft bricked my phone when i was flashing VoLte Rom. It's been 1 whole month and i haven't found any solution. i tried flashing through CM recovery and fastboot and YGDP tool but non of it works. I am so pissed off. Did you find any solution bro?
During the day yesterday and today I was reading threads about this problem, but none of them could really help me.
What happened was that I was following a tutorial on how to root the cell phone
https://forum.xda-developers.com/android/general/root-unlock-bootloader-root-lenovo-k8-t3703559
and when I install the image that the tutorial told me, I enter in a loop, showing the screen of "Your device is corrupt.
I can enter a few seconds in Download Mode, but the pc does not recognize it, it seems that it will recognize the cell phone for about 2/3 seconds but then nothing happens. I can not enter Recovery, because when I press volume down + power, it only turns on and starts the loop again.
Is there any salvation for the cell phone or does it have a hard brick?
Well since on this link you have posted is guide for Lenovo and not LG that what happened is expected, I guess you bricked it very well. Here on K8 forums and k10 there are some unbricking guides so check them out.
Professor Woland said:
Well since on this link you have posted is guide for Lenovo and not LG that what happened is expected, I guess you bricked it very well. Here on K8 forums and k10 there are some unbricking guides so check them out.
Click to expand...
Click to collapse
then I will not be able to use it again? I can not find any solution that works for me
I have tb-x304f that I unlocked and flashed TWRP and then tried three different custom roms that all failed to boot. I am trying to restore stock firmware but it is not working. I have installed firmware with qdl in Linux and with QFIL and Lenovo Rescue and Smart Assistant in windows. All three methods report success. After allowing time to boot it ultimately boots into 900E Diagnostic mode after a brief stint as MTP device. The boot logo shows on display, the little Lenovo tone chimes and a progress bar with powered by Android starts. Bar gets about one third of the way and it goes black, then it's 900E Diagnostics again. Use hardware buttons to put it in QDLoader 9008 mode and flash again, same results every time.
I am lost, with successful flashing with no errors, but it won't boot. Do we have a Qualcomm expert in house that can help me figure this one out ?
Hi, first of all, sorry for my English, I don't write it very well.
I have a Lenovo Tab4 A 10 x304l actually it is in bootloop, because I tried to install a Custom ROM and never boot it. I tried to install two stock ROM, that I download to diferent sites, but the tablet after a minute reboot it's self continiusly. I need your help, if Is possible, because I don't know what to do.
My WhatsApp Is ±5354161215, I apreciate any help.
Thanks very much...