Hello,
J have make a bétisse by wanting to change of kernel on blissspop, I remained on the logo lg blocked(surrounded).
I was able to crossed(spent) there recovery TWRP j was able to reinstall the version v 3.9 (as long as j was there) for all that now j have an error:
E: Unable to mount storage? When j utilse TWRP (v 2.8.7.1)
Somebody could inform me about this error and indicate me the procedure to have no more this error message
Thank you
setting permissions
unmounting system
installation complete
updating partition details...
...done
E: unable to mount storage
Related
hi.
after rooting my xperia x10i with(DooMLoRD_v3_ROOT-zergRush-busybox-su) tool, i have installed xrecovery on my phone. and i was trying to install the custom ROM (Champ-Tof37-X10S-V8-2-Main) from sdcard. but when select to flash this ROM in xrecovery an error occurs :
E: Can't mount /dev/block/mmcblk-p1 (or /dev/block/mmcbkl0)
(Device or resource busy)
E: Can't mount SDCARD:Champ-Tof37-X10S-V8-2-Main.zip
Installation aborted"
i m using xrecovery0.3..
plz tell me what should i do..?
thanks
Ive unlocked it and followed the proper steps to root it but when im in Clockworks mod or TWRP, I get the same "cannot mount" errors like unable to mount /data etc etc.
Thinking i did something wrong, i looked for an alternative and found wugs Nexus Root Toolkit 2.0.5
Everything runs smoothly, even did a successful factory flash to 5.1.1 and retried rooting.
Same errors, unable to mount. Im not sure whats causing these errors but would it have something to do with "secure boot enabled" ?
Ive been googling this since yesterday and I cant find a concrete answer as too why TWRP cannot mount or find anything.
Nexus 7 2013 LMY47V
Some errors:
E: Unable to find partition size for '/boot' and '/recovery' and '/misc'
E: Primary block device '/dev/block/platform/msm_sdcc.1/by-name/userdata' for mount point '.data' is not present!
E: unable to recreate /data/media folder.
E: unable to find partition size for '/sbl1/
E: unable to mount '/system' and '/data' and '/cache'
Nothing? Am I missing something completely obvious? Sorry if I am, ive only ever rooted a kindle fire hd once a few years ago.
I guess ill be using no root firewall then? Funny thing I always though the adblock app needed root to work but its working without it.
Shame I cant remove hardware programs like "google +"
cerbyd said:
Ive unlocked it and followed the proper steps to root it but when im in Clockworks mod or TWRP, I get the same "cannot mount" errors like unable to mount /data etc etc.
Thinking i did something wrong, i looked for an alternative and found wugs Nexus Root Toolkit 2.0.5
Everything runs smoothly, even did a successful factory flash to 5.1.1 and retried rooting.
Same errors, unable to mount. Im not sure whats causing these errors but would it have something to do with "secure boot enabled" ?
Ive been googling this since yesterday and I cant find a concrete answer as too why TWRP cannot mount or find anything.
Nexus 7 2013 LMY47V
Some errors:
E: Unable to find partition size for '/boot' and '/recovery' and '/misc'
E: Primary block device '/dev/block/platform/msm_sdcc.1/by-name/userdata' for mount point '.data' is not present!
E: unable to recreate /data/media folder.
E: unable to find partition size for '/sbl1/
E: unable to mount '/system' and '/data' and '/cache'
Click to expand...
Click to collapse
Wow i have the same **** with mine same version and same device... you find a solution
I was having the same issue and after a few hours of searching, I found this post: http://forum.xda-developers.com/nexus-7-2013/nexus-7-2013-qa/mount-recovery-t3064562
It seems like there's a new version out that doesn't work quite as easily as just flashing the latest TWRP version.
hello sir,
i am using micromax A120 (8gb kitkat 4.4.2). i rooted this mobile
using KING ROOT app.
yesterday i am interested to change my rom so, i found some custom
roms on google finally i got SAMSUNG S4 rom and i downloaded this rom
and stored on my sdcard.
i downloaded CWM(6mb) file
i used uncle rom app to reboot with cwm recovery.that time this error will occur
E: Can't mount /cache/recovery/command
E; Can't mount /cache/recovery/log
E; Can't open /cache/recovery/log
E; Can't mount /cache/recovery/last_log
E; Can't open /cache/recovery/last_log
after i install samsungS4.zip from sd card. but,sccreen is blank
My mobile phone isn't booting up and when I open in recovery mode I get error
E: Can't mount /cache/recovery/command
E; Can't mount /cache/recovery/log
E; Can't open /cache/recovery/log
E; Can't mount /cache/recovery/last_log
E; Can't open /cache/recovery/last_log
I have tried all options in wipe menu
my phone just stuck in booting screen showing micromax symbol and
below it 'powered by android'
my phone is rooted with kinguser installed.
what I have to do to boot my mobile normally as before ?
pls help me sir i believed only for you
(Mod Edit; Personal details removed
rajasoft601 said:
hello sir,
i am using micromax A120 (8gb kitkat 4.4.2). i rooted this mobile
using KING ROOT app.
yesterday i am interested to change my rom so, i found some custom
roms on google finally i got SAMSUNG S4 rom and i downloaded this rom
and stored on my sdcard.
i downloaded CWM(6mb) file
i used uncle rom app to reboot with cwm recovery.that time this error will occur
E: Can't mount /cache/recovery/command
E; Can't mount /cache/recovery/log
E; Can't open /cache/recovery/log
E; Can't mount /cache/recovery/last_log
E; Can't open /cache/recovery/last_log
after i install samsungS4.zip from sd card. but,sccreen is blank
My mobile phone isn't booting up and when I open in recovery mode I get error
E: Can't mount /cache/recovery/command
E; Can't mount /cache/recovery/log
E; Can't open /cache/recovery/log
E; Can't mount /cache/recovery/last_log
E; Can't open /cache/recovery/last_log
I have tried all options in wipe menu
my phone just stuck in booting screen showing micromax symbol and
below it 'powered by android'
my phone is rooted with kinguser installed.
what I have to do to boot my mobile normally as before ?
pls help me sir i believed only for you
(Mod Edit: Personal details removed)
Click to expand...
Click to collapse
Hey is your problem solved or are you still facing it
I think you have done a soft brick on it
Sent from my rainbow using XDA Free mobile app
taksheelj said:
Hey is your problem solved or are you still facing it
I think you have done a soft brick on it
Sent from my rainbow using XDA Free mobile app
Click to expand...
Click to collapse
I m facing the same problem. Sir please Help...
I had the same problem, I was trying to flash the cyanogen mod 12.1 on my studio 5 c hd. The solution, as answered by the creator from said rom, was to install the wiko base. I'm still configuring the wiko base, if it work i'll report here. But, it's worth trying.
Sorry for my english, it's not my first language.
nilesAnand said:
I m facing the same problem. Sir please Help...
Click to expand...
Click to collapse
Use twrp i feel its better
Clean wipe data n cache
Dalvik too
Then get on base a120 signed jelly bean rom then flash the rom it shall work
Sent from my rainbow using XDA Free mobile app
rajasoft601 said:
hello sir,
i am using micromax A120 (8gb kitkat 4.4.2). i rooted this mobile
using KING ROOT app.
yesterday i am interested to change my rom so, i found some custom
roms on google finally i got SAMSUNG S4 rom and i downloaded this rom
and stored on my sdcard.
i downloaded CWM(6mb) file
i used uncle rom app to reboot with cwm recovery.that time this error will occur
E: Can't mount /cache/recovery/command
E; Can't mount /cache/recovery/log
E; Can't open /cache/recovery/log
E; Can't mount /cache/recovery/last_log
E; Can't open /cache/recovery/last_log
after i install samsungS4.zip from sd card. but,sccreen is blank
My mobile phone isn't booting up and when I open in recovery mode I get error
E: Can't mount /cache/recovery/command
E; Can't mount /cache/recovery/log
E; Can't open /cache/recovery/log
E; Can't mount /cache/recovery/last_log
E; Can't open /cache/recovery/last_log
I have tried all options in wipe menu
my phone just stuck in booting screen showing micromax symbol and
below it 'powered by android'
my phone is rooted with kinguser installed.
what I have to do to boot my mobile normally as before ?
pls help me sir i believed only for you
(Mod Edit: Personal details removed)
Click to expand...
Click to collapse
did you sort it out are still getting same problem ??
I have the same exact issue
Rohithdrpl said:
did you sort it out are still getting same problem ??
I have the same exact issue
Click to expand...
Click to collapse
almost all CUSTOM ROMs update from recovery required jellybean stock rom 4.2.2
first flash jellybean stock rom firmware upgrade method in SPflash_tool
flash CWM recovery then update your custom ROMs
same problem here plz help
i have same problem in recovery it wont allow me to flash CM12.1
stock rom is working fine.
plz need help..
rajasoft601 said:
hello sir,
i am using micromax A120 (8gb kitkat 4.4.2). i rooted this mobile
using KING ROOT app.
yesterday i am interested to change my rom so, i found some custom
roms on google finally i got SAMSUNG S4 rom and i downloaded this rom
and stored on my sdcard.
i downloaded CWM(6mb) file
i used uncle rom app to reboot with cwm recovery.that time this error will occur
E: Can't mount /cache/recovery/command
E; Can't mount /cache/recovery/log
E; Can't open /cache/recovery/log
E; Can't mount /cache/recovery/last_log
E; Can't open /cache/recovery/last_log
after i install samsungS4.zip from sd card. but,sccreen is blank
My mobile phone isn't booting up and when I open in recovery mode I get error
E: Can't mount /cache/recovery/command
E; Can't mount /cache/recovery/log
E; Can't open /cache/recovery/log
E; Can't mount /cache/recovery/last_log
E; Can't open /cache/recovery/last_log
I have tried all options in wipe menu
my phone just stuck in booting screen showing micromax symbol and
below it 'powered by android'
my phone is rooted with kinguser installed.
what I have to do to boot my mobile normally as before ?
pls help me sir i believed only for you
(Mod Edit: Personal details removed)
Click to expand...
Click to collapse
Download the stock ROM of your phone and flash it via SP flash tool.
And as for recovery only CWM recovery works for the JB version and CTR for KK.
SpEeDeX^
---------- Post added at 04:21 AM ---------- Previous post was at 04:07 AM ----------
blackcat.vinu said:
i have same problem in recovery it wont allow me to flash CM12.1
stock rom is working fine.
plz need help..
Click to expand...
Click to collapse
Most of the custom ROMs are based on Wiko rainbow base which supports all recoveries. If you want to flash Custom roms you should flash wiko rainbow v13 stock ROM via SP flash tool.
SpEeDeX^
MOD ACTION:
Thread closed at the request of OP.
Hi,
i'm pretty new to this and i have kinda big problem. I had MIUI 7 rom installed on my S4 I9505, but yesterday after the update phone wont boot. I downloaded new .zip file, put it on SD card, boot into recovery, wipe everything and tried to install new rom. With no succes. I tried 3 differrent roms, i even tried with diffirent recovery, still nothing.
This is what it says:
Installing: /storage/sdcar1/cm-12.1-20151106-NIGHTLY-jfltexx.zip
Finding update package
Opening update package
Installing update
detected filesystem ext4 for /dev/block/platform/msm_sdcc.1/by-name/system
mount: failed to mount /dev/block/platform/msm_sdcc.1/by-name/system at /system: Invalid argument
unmount of /system failed: no such volume
detected filesystem ext4 for /dev/block/platform/msm_sdcc.1/by_name/userdata
Patching system image unconditionally...
And that's it. Previosly i was getting errors, status 0 and status 7 if i remmember correctly, but now not even that
Now what to do? Please be noob friendly At this point i don't even care any more what rom to install, stock or custom, but i think i would prefer stock.
Thanks for your help!
Edit: I found this guide, will it do it? forums.androidcentral.com/ambassador-guides-tips-how-s/499009-guide-samsung-how-flash-stock-rom-via-odin-new-interface.html
It worked. Admin, you can close/delete this thread.
Hi Folks,
I am new to rooting and struggling with a problem. I have an old zenfone 5(ASUS_T00J) model. I am using custom rom BlurOS found in the below thread:
https://forum.xda-developers.com/zenfone-5/development/rom-bluros-version-1-0-zenfone-5-t3619058
I am trying to flash Magisk from TWRP recovery but it's failing with below error:
E: Unknown File System: 'osip'
E: Unknown File System: 'osip'
E: Unknown File System: 'osip'
E: Invalid Block device on '/dev/block/zram0
none
swap
defaults
zramsize=67108864
', 'swap', 36
Updating partition details..
...done
Full SELinux support is present.
MTP Enabled
Installing '/sdcard/Download/Magisk-v20.4(20400).zip'..
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
**********************
Magisk 20.4 Installer
**********************
- Mounting /system
- Target Image: /dev/block/by-name/boot
- Device platform: x86
- Constructing environment
- Adding addon.d survival script
E: Error executing updater binary in zip '/sdcard/download/Magisk-v20.4(20400).zip'[/QUOTE]
Error flashing zip '/sdcard/download/Magisk-v20.4(20400).zip'
Updating partition details...
...done
Updatrer Scripts are in below Google Drive Location:
https://drive.google.com/file/d/1SdtXdgB-iCB1X5PL3OCsZLrcUT6WlRzX/view?usp=sharing (Updater Script)
https://drive.google.com/file/d/1X2lupRfMUj-n5pRx2c0h0NQHUvfOXJAP/view?usp=sharing (Updater Binary)
Steps followed by me:
1. Installed latest Magisk manager from GitHub
2. Downloaded the latest zip file prompted by Manager
3. Reboot in TWRP recovery
4. Flashed the newly downloaded zip file
Appologies in advance if this is not the right forum or I have violated any guidelines. Let me know if you need any more details from my side. Thanks in advance.
Update
The issue still remains. Tried to find solutions online. Below methods were suggested. Since, I am new to this, might have tried something silly in the process.
Method 1:
Flash the Rom boot image via TWRP
Result: Did not prompt to provide any partition but Failed with error 'No Partition selected for flashing'. Updated the TWRP to 3.2.3 and tried the same thing again. This time prompted for a partition but no option was available that I could provide there and failed with the same error.
Method 2:
Patching the Boot image of my ROM through magisk patch
Result: Extracted the boot image for BlurOS Custom rom and tried to patch it through magisk Manager. Installation failed with 'Unable to repack boot image'.
Since I updated the TWRP, tried to flash the magisk zip file hoping for some other error (at least). It failed with below error message:
Installing zip file '/sdcard/Download/Magisk-v20.4.zip'
Checking for digest file...
Skipping Digest check: No digest file found
*************************
Magisk 20.4 Installer
*************************
- Mounting /system
! Unable to detect target image
- Unmounting partitions
Updater process ends with error: 1
Error Installing zip file
Updating partition details...
... done
Kindly let me know if you guys have any pointers. Any leads will be appreciated.
Magisk is unable to patch x86 boot.img's, so you have to use "android image kitchen"
Magisk patches Ramdisk file so you have to do:
move x86 ramdisk to ARM boot.img
Patch it via magisk
move patched ramdisk back to x86 boot.img
You can try boot.img's that I made for RR and Lineage in my thread. They are pre-patched with magisk 20.4
Anyways, is BlurOS better than lineage or RR ?