So I need help. I tried to downgrade from lollipop oe1 to kitkat nk2 but every time I try to flash the firmware with Odin it says failed and my phone says fusion 2 < binary 1. Any way to fix this?
Edit: ok so after doing some research I found out verizon chose to mega lock bootloader with the oe1 update and you have no choice wether to take the update or not, but anyway the update madness it so you cannot downgrade or root.
So I was wondering if I can just flash the od5 bootloader in Odin and that would just just allow me to downgrade? Idk
Nope you are locked out un-rootable. You may very well brick your phone even trying.
Related
Hello. Today I installed on my notes 3 SM-N9005 lollipop 5.0 version Poland but I found them a few problems: the first is that the vibration of the keyboard does not work. I found two of the slowdowns in the task manager. Now if I want to return to kitkat I can do fleshando firmware via Odin? ??
+1
I asked the same question with no accurate answer, i found a thread on how to downgrade from leaked ver. Of lolipop and not the official one and i won't risk trying this method, what I'm asking for is it possible to downgrade to official kitkat using odin specially that i have ticked update bootloader button when i flashed official Lolipop.
Will this work or we are risking our mobiles for a brick?
Appreciate if someone answered us with a proven record.
Regards,
however I have seen videos on youtube that have made the downgrade from 4.4.2 to 4.3 fleshando only the firmaware dacendo and then wipe data / cache. I think the same procedure also applies to switch lollipop kitkat.
It's safe to downgrade using odin. I did it myself from the leaked and the official release (both of them with the bootloader updated). In case odin complains about size just check my last posts and use the PIT file I provided.
Sent from my SM-N9005
Hi,
I have downgraded from the Polish Lollipop without using a PIT file - successfully. You will need to carry out a data wipe and factory reset, but it worked fine.
I couldn't... flashing ENC2 with Odin gave me size error, flashing with PIT solved that, but my IMEI and Baseband were gone. I gave up at that point, flashed Lolipop again and am back to normal now.
azidhaka said:
I couldn't... flashing ENC2 with Odin gave me size error, flashing with PIT solved that, but my IMEI and Baseband were gone. I gave up at that point, flashed Lolipop again and am back to normal now.
Click to expand...
Click to collapse
it just happens to me .... it would be nice to someone who really knows solve this problem make a tutorial on how to return to kk
Download N9005XXUGNK2 from sammobile and flash with odin, after the flash complete do a factory reset via recovery or your phone wont boot and will be stucked in samsung logo
As the Title states I have been trying to flash to Lollipop using the thread Update to lollipop and keep root using Flashfire app. I have downloaded and followed the procedure (yes I am rooted and confirmed with RootBasic) with it failing.
What happens is I load the files in order stated per the guide hit the lightning bolt, does the reboot and then gives error no command and then sits at stock flash update where you can either reboot, flash file or few other choices. I have tried numerous times with each time same result. What is going wrong? As I stated on am on MK2 firmware with ATT update frozen so not sure why this is. When put in download mode I confirm Knox 0 and Offical software with it having 0x30 for bootloader. Any suggestions or should I ODIN update but with what?
Frankpjr said:
As the Title states I have been trying to flash to Lollipop using the thread Update to lollipop and keep root using Flashfire app. I have downloaded and followed the procedure (yes I am rooted and confirmed with RootBasic) with it failing.
What happens is I load the files in order stated per the guide hit the lightning bolt, does the reboot and then gives error no command and then sits at stock flash update where you can either reboot, flash file or few other choices. I have tried numerous times with each time same result. What is going wrong? As I stated on am on MK2 firmware with ATT update frozen so not sure why this is. When put in download mode I confirm Knox 0 and Offical software with it having 0x30 for bootloader. Any suggestions or should I ODIN update but with what?
Click to expand...
Click to collapse
We just discovered this morning on the Vz S4 that FF does not function properly on their MK2(4.2) firmware which is likely also the issue here. You will first need to update to KitKat using the following file then root with towel root before updating to 5.0: https://www.androidfilehost.com/?fid=23501681358548937
Before I proceed to KitKat with file linked to is there a guide to properly performing this and then rooting? I will update from MK2 to NB 1 then I need to root, then do the FlashFire and Lollipop undate. I see the guide to use ODIN but then I will have to root I also have not used towel root either so any guide would be awesome. This should not change KNOX either correct (although I guess it does not matter since I am long out of warranty)?
I want to have a clear understanding of procedure so I don't brick the phone! I have not used ODIN before since I haven't really done much rooting other than when I first got the replacement phone last year
I'd suggest [GUIDE]Odin to Stock, Updating, Rooting, and Installing Safestrap by guut13, and of course [How-To] Update to I337_OC3 - 5.0.1 and KeepRoot (4/7/2015) by muniz_ri for rooted Lollipop. Look in the I337 General forum for both.
Thanks Creepyncrawly and muniz_ri for both of your help it was easy to update from MK2 for this noob!
Ok I followed the guide and did update to stock nb1 and rooted, used towel root and then used flashfire to Lollipop and all seems to be working (I still am in process of setting phone up but it is running lollipop).
Since this is oc3 rooted is there anything else I have to do such as freeze att update? Anything else I should do right away?
i was able to take part one of the update which i think did something to Root....when I open SuperSU it says cant install binary, may need to re-root. I don't want root anymore. I tried second OTA update and fails.
I'm guessing i just have to odin flash a stock img?...my question is, can i do the lollipop one? or do i have to do kitkat and just take the OTA? also, does it matter which version of kitkat or lollipop?
thanks!
download the latest stock rom from somewhere, and flash with odin or flashfire. That should be all you need to do.
thanks...just flashed one of the lollipops and worked great! didnt have to even kept data and custom went away!
I hit on UPDATE on the phone for an OTA update but it only says UNABLE TO CONNECT AT&T SERVER. When I bought it, it had 5.0.1 (I337UCUGOC3) out of the box. Searching on internet says that is bootloader locked (so I cant do anything).
- Can I Update to I337UCUGOK2 and bootloader will be unlocked (I mean, will I be able to do it)?
- Does anyone know where can I grab I337UCUGOK2 for offline install and is it ODIN safe to update it (remember I have I337UCUGOC3 bootloader locked)?
please help
Once the bootloader is locked, it will always be locked until someone finds a way to unlock it. Updating the bootloader will not allow it to be unlocked.
cybercuate said:
I hit on UPDATE on the phone for an OTA update but it only says UNABLE TO CONNECT AT&T SERVER. When I bought it, it had 5.0.1 (I337UCUGOC3) out of the box. Searching on internet says that is bootloader locked (so I cant do anything).
- Can I Update to I337UCUGOK2 and bootloader will be unlocked (I mean, will I be able to do it)?
- Does anyone know where can I grab I337UCUGOK2 for offline install and is it ODIN safe to update it (remember I have I337UCUGOC3 bootloader locked)?
please help
Click to expand...
Click to collapse
Unlocking/exploiting the bootloader for the AT&T is still in process, I think.
Bootloader locked means you can not install custom recovery like TWRP, CWM or custom kernel. You can still root, you can still use odin and you can still install custom rom using either safestrp or flashfire.
Here is the thread explaining how to upgrade stock or rooted stock roms.
The explanation starts from installation of NB1 firmware so that you can easily root the phone by using twolroot.
If you do not care for the root you can start reading from the step 2 "Flash update in stock recovery"
Since you are on OC3, you need OC3 to OC4 and OC4 to OK2 files to get OK2.
help... I want to RMA it
sway8966 said:
Unlocking/exploiting the bootloader for the AT&T is still in process, I think.
Bootloader locked means you can not install custom recovery like TWRP, CWM or custom kernel. You can still root, you can still use odin and you can still install custom rom using either safestrp or flashfire.
Here is the thread explaining how to upgrade stock or rooted stock roms.
The explanation starts from installation of NB1 firmware so that you can easily root the phone by using twolroot.
If you do not care for the root you can start reading from the step 2 "Flash update in stock recovery"
Since you are on OC3, you need OC3 to OC4 and OC4 to OK2 files to get OK2.
Click to expand...
Click to collapse
Everywhere says I need a kitkat rom as base.
My s4 came with 5.0.1 with OC3 and bootloader locked out of the box. I tried some post where says I can flash TWRP and CWM but my phone stucked on bootloops. Then I managed to get back to stock rom and now when I want to turn it on it says " SAMSUNG (and lower on the screen) Custom"
Camera began to fail and I want to return it as RMA but I was looking to reset the flash counter but every post I read is that OC3 bootloader locked users are just doomed.
Do you know a method that I can do for reset that counter?
Camera dont focus anymore and I tried all the posts about safemode, etc.
cybercuate said:
Everywhere says I need a kitkat rom as base.
My s4 came with 5.0.1 with OC3 and bootloader locked out of the box. I tried some post where says I can flash TWRP and CWM but my phone stucked on bootloops. Then I managed to get back to stock rom and now when I want to turn it on it says " SAMSUNG (and lower on the screen) Custom"
Camera began to fail and I want to return it as RMA but I was looking to reset the flash counter but every post I read is that OC3 bootloader locked users are just doomed.
Do you know a method that I can do for reset that counter?
Camera dont focus anymore and I tried all the posts about safemode, etc.
Click to expand...
Click to collapse
Flashing TWRP and CWM is for the AT&T S4 with older bootloader (MDL, MDB). After that two firmware versions the bootloader is locked.
For AT&T S4 the last full firmware released is NB1. After that they released incremental updates via OTA. That is why you need kitkat (NB1) as base.
For NB1, Muniz uploaded two firmwares. One is the stock and the other is rootable stock. Try the stock one and see you still have the custom symbol.
To reset the counter, there is an app calls Triangle away by Chainfire. However, it does not work on AT&T S4 with locked bootloader.
Trying Odin-Stock NB1
sway8966 said:
Unlocking/exploiting the bootloader for the AT&T is still in process, I think.
Bootloader locked means you can not install custom recovery like TWRP, CWM or custom kernel. You can still root, you can still use odin and you can still install custom rom using either safestrp or flashfire.
Here is the thread explaining how to upgrade stock or rooted stock roms.
The explanation starts from installation of NB1 firmware so that you can easily root the phone by using twolroot.
If you do not care for the root you can start reading from the step 2 "Flash update in stock recovery"
Since you are on OC3, you need OC3 to OC4 and OC4 to OK2 files to get OK2.
Click to expand...
Click to collapse
sway8966 said:
Flashing TWRP and CWM is for the AT&T S4 with older bootloader (MDL, MDB). After that two firmware versions the bootloader is locked.
For AT&T S4 the last full firmware released is NB1. After that they released incremental updates via OTA. That is why you need kitkat (NB1) as base.
For NB1, Muniz uploaded two firmwares. One is the stock and the other is rootable stock. Try the stock one and see you still have the custom symbol.
To reset the counter, there is an app calls Triangle away by Chainfire. However, it does not work on AT&T S4 with locked bootloader.
Click to expand...
Click to collapse
Thanks. I'll try Odin it with the stock rom from your link. I'll post news here when it finish flashing
1st part - Success
I'm on 4.4.2 NB1, flash counter back to normal but still bootloader locked
Now I have to go back to OC3 to RMA it.
OTA does nothing, smartswitch shows no updates neither kies.
I'll have to Odin it back to OC3
Can I have some help?
And Success. I'm back on stock OC3 no root.
time to RMA
- camera still doesn't focus
- boot screen is back to normal but when in odin mode the counter shows 0x1
- sometimes shows "sim card could not be detected" or similar messages and force me to restart the phone (just happend 2 times until now, never happend before)
I followed this thread
http://forum.xda-developers.com/galaxy-s4-att/general/guide-odin-to-stock-updating-rooting-t2926642
Post 2
Thanks to sway8966
I don't know if I'm in the correct forum for this, but I'm confused about BL's and need a some assistance. I recently went from a rooted stock ni2 4.4.4 rom to CVertigo1's no-bs bpb1 5.0 rom. I have successfully unlocked my bootloader again and flashed TWRP 3.0.0. Everything's running fine at this point. I want to return to stang5litre's 5.0 dev ed rom that I was running when I ran into a camera failed issue, screwed the phone up and odin'd back to ni2 and rerooted. Phone Info is telling me that I have g900vvru1ani2 bootloader version. I thought I needed to be on a 5.0 bootloader to run a 5.0 rom? BOK3 pda and csc versions and bpb1 baseband.
Do I need to worry about the bootloader?
Can I install stang5litre's rom with my phone the way it is?
I'm able to flash in TWRP, and have used odin repeatedly.
Any help please?
Thanks
Don't know how I didn't see this. Can I follow jrkruse's instructions for updating /downgrading bootloader on page one of the bootloader unlock thread?