note 3 sm9005 boot loop after upgrading firmware to 5.0 - Galaxy Note 3 Q&A, Help & Troubleshooting

hi..last night i updated firmware to 5.0 on my note 3 sm9005 with odin..process was succeeded odin showed green and passed message...my phone restarted and android updated took some time..then my fone was okay and updated fine..while i was using fone my fone went off automatically even battery was 72 % ..i tried to turn it on again but it didnt...i pluged in charger thinking tht battery is finished..it remained restarting again and again...i attached it via usb with laptop it remained rebooting with a blue message on samsung logo screen saying recovery booting then again restart..i tried to goto recovery but in vain...the only thing i can do is it can only go to download mode...i tried to flash other country firmwares but same issue is showing....please help me regarding this..i can not turn it on manually by pressing power button..i can not go to recovery because its not turning on by power button...i can only goto download mode by attaching it to laptop....please please help
when i tried to flash custom recovery then it say recovery is not seandroid enfocing etc and remains restarting while conected to usb

Related

Phone stuck on first samsung screen recovery mode not working

Hi,
Yesterday i've flashed I9505XXUBMGA_I9505OXXBMG3_I9505XXUBMGA_HOME.tar. everything was fine so i left it for charge overnight.
When i woke up phone was allready on that white first Samsung logo and it was vert hot.
I attempt several steps to repair this...
1. boot to recovery - no luck , stuck on white logo with recovery booting message.
2. boot to download mode - success
3. flash rom again - odin shows PASS message but issue remains.
4. Flash rom again with PIT - still no luck.
Does anyone have any idea how to fix this???

Samsung Galaxy S5 Stuck at Samsung Logo

Hi guys first i want you to know that my english is bad...
My phone is G900K - SpaceX Rom 5.0
I am using SpaceX Rom 5.0 for weeks and it is buggy, i experience random boot,app crash,fast battery drain and freezes.
Yesterday i reboot my phone and after "Android is Starting" i got message that System Crash or System UI i am not sure what it is but it has System word in error report. Then my phone didn't start so i remove the battery and put it again. After pressing on the Power on Button my S5 starts and i notice the Blue Light in Upper Left didn't Light Up and my phone didn't boot to 2nd Samsung Logo. When i press Power On Button my S5 will turn on and 1st Samsung Logo will appear then It will Turn Off then Vibrates then goes back to 1st Samsung Logo it keeps repeating. Also i try Recovery Mode but i can't enter to it my phone will repeat the same process as i Turn On my phone. I can go to Download Mode, And i flash Stock Rom and after flashing Stock Rom there's a blue text in upper left Recovery Booting... but its not booting into recovery, It will just turn off again then vibrates then goes to 1st Samsung Logo.
If anyone experiencing the situation right now you can comment​
Same issue here. My phone is stuck at RECOVERY BOOTING. Is there anyone who can fix this issue? Thanks.
Boot to download mode (Vol down & Home & Power)
Flash stock ROM from sammobile .com with ODIN
Instructions under the download on their site
Go into download mode and do a firmware upgrade and initialisation through kies3. You will need your serial number and model number( on the white sticker behind the battery. in kies3 go tools> firmware upgrade and initialisation, then follow the on screen steps. I used this when I soft bricked my note 2 when I had it, I personally find it's the best way to restore a samsung device.
You should try first with kies3, it did help me to recover from custom ROM installation.
If it fails, flash stock with Odin3 from phone download mode is your last option.
I'm having the exact same issue! Been trying to flash the stockfirmware, but still stuck in recovery booting loop! Even trying to get into recovery mode has it looping. Kiess 3 says that my serial number is invalid, so matter which number I put in too. Hoping for some help!
*Detection* said:
Boot to download mode (Vol down & Home & Power)
Flash stock ROM from sammobile .com with ODIN
Instructions under the download on their site
Click to expand...
Click to collapse
This Doesn't Work !! Odin Shows PASS message. But the phone dosn't boot. Gonna try usng Kies
boomie0123 said:
I'm having the exact same issue! Been trying to flash the stockfirmware, but still stuck in recovery booting loop! Even trying to get into recovery mode has it looping. Kiess 3 says that my serial number is invalid, so matter which number I put in too. Hoping for some help!
Click to expand...
Click to collapse
Mine is the SM-G900W8 with Telus, so if we have the same model, I could probably give you my serial number cause I never had issues with mine. I know I have read places that sometime when people get stuck in recovery like that, they do a factory wipe and cache wipe in the stock recovery to get it to boot.
This same thing is happening with my s5 Verizon.. Need help to fix this i've tried flashing via odin, factory reseting..nothing worked
Can anybody help me please....thanks

Cant enter recovery or download mode on Note 3 SM-N9005

Hello
So today was planning to flash with a new ROM, so i started to do a factory reset from with in android, nothing happened
so i reboot the phone to enter recovery mode to do it from there, using Teamwin for that. But when booting up, getting the message entering recovery mode 5 sec later i see the logo for Teamwin and here it stops.
The logo keeps flashing every 4 seconds or so. Have tried without Sim card, done the battery thing where i remove
it and hold the power button for a while, but all end up in same, the teamwin logo flashing
As far as i can see i can´t enter anywhere to flash the phone as the only thing i get is a flashing logo...
Also Odin does not detect the phone via usb either
is there a way to resolve this?
Thanks

Galaxy S8+ in bootloop without recovery and frp locked

Hi guys!
I've read tons of threads and guides on Google but nothing helped me to bring to life my Samsung Galaxy S8 Plus. After hours and hours of test and probes I surrender!
Basically I was using normally my phone and suddenly has power off and showing the Samsung Galaxy Logo continuously. I've force reboot it with vol down+pwr button and after some minutes restart normally again. After 5min again the boot loop and stuck there. Tried again to power it off but didn't work so I thought was the battery (because is 3yrs old with heavy use and months ago I had the screen flickering and a battery drain to zero). I opened the phone, unplug the battery and the power button (because I thought was the power button stucked as on my father phone). So after mounted all the stuff in their place I tried to boot it and suddenly start to work again! I've backup all my things rapidly but again power off by himself and this is the last time I see it working.
So I tried to empty the cache entering in the recovery but it was useless so the only way seems flashing the original FW with Odin. Downloaded the right one with Frija, upload the rights files in Odin (Home_csc because I don't want to lose my internal memory stuff) and the phone automatically reboots, pass the Samsung logo and go in Upgrading mode with the blue android screen and a % increasing. After that by himself power off and nothing happen.
I read some stuff about my possibilities to recover it without losing data but a lot of tutorial talk about entering in recovery but I cannot do it! Simply does not go in recovery with vol_up+bixby+pwr_button even after force shutdown it with vol_down+pwr_button or reattach the battery. The only thing I'm allowed to do is put it in Download Mode to be recognized by Odin.
I've tried to launch ADB devices but it is not visible in Download Mode.
I've tried to flash another firmware for the same model (theoretically my one is unbranded italian) but I tried with WIND one because in download mode there is a text "Carried_ID:WIND" but this FW Odin fail to upload it.
I've tried to flash the TWRP with Odin but fails on the phone with error "Custom binary(recovery) blocked by FRP Lock". I've searched how to unlock it but without have access to recovery or phone settings seems impossible. And this phone has also OEM Lock.
I've tried again to flash the FW but the only difference than before was the blue android robot with stucked text "Installing system update", "Erasing" , "yellow advice notice" and finally a green screen with "An error has occurred while updating the device software.Use the Emergency recovery function in the Smart Switch PC Software". And yes, I already tried with Smart Switch but the program does not detect the phone.
I've also tried to flash the original recovery but nothing change.
Seems that my devices is bricked or a kind of boot loop.
In my situation there is something that I can do to recover the internal memory data? I don't tried to flash the FW with CSC file because I don't want to erase all the data.
My Galaxy was original since the purchasing, no root or flashed a FW, only OTA updates.
I've attached a photo with the stuff that appear in Download mode.

SM-N910F Blackscreen after flash / Odin = Pass - looking for help

Hello community,
A good friend of mine asked me to support him with his "bricked" Note 4.
I tried now for a few hours (usually im experienced with stuff like that) without any success.
Downloadmode is accessable. Odin (3.09) says most of time 'pass'.
I flashed the following stock roms:
N910FXXU1DRI2_N910FOXA1DRI1_DBT_(Germany) [We are from germany] 1 File.
Odin tells me: pass, Phone reboots in recovery mode, installs a system update, processbar filled half, "earasing", reboot into recovery and display stuck on black after retry to install a system update.
I already tried to debrick - after reflash the PIT file, the Note4 stuck in the Note4 Splashscreen with a blue LED blinking but nothing more happens. [Debrick XDA Thread] (should it?)
I tried also the N910FXXU1ANK4_DBT_4Files Firmware but same behavior (black screen after system update - the phone must turned on since the power button doesnt react - I need to pull of the battery for reboot).
Any hint for me what Im doing wrong? This devices drives me crazy ...
Is the device hardware broken maybe? What do you guys think?
Thank you for reading
Best regards
/nepixl
Have you tried to install a custom recovery instead first?

Categories

Resources