please help me, i was trying to root my lg magna and accidentally unplugged the usb wire. now mt device is stuck in logo only. i tried to hard reset but nothing happened, i also downloaded the lg mobile support tool but doesnt seem to detect the problem.
Need lg h502f firmware
PPallav said:
Need lg h502f firmware
Click to expand...
Click to collapse
hey, check here how to flash the brick lg magna to stock rom.
Code:
dokter4rayap.blogspot.co.id/2015/09/cara-flashing-atau-install-ulang-stock.html
is there by any way to reinstall stock firmware of this LG-H502f
Sent from my HUAWEI Y560-U02 using XDA Free mobile app
---------- Post added at 04:13 AM ---------- Previous post was at 04:12 AM ----------
please can someone redirect me to the right
thread if there is one thank you
Sent from my HUAWEI Y560-U02 using XDA Free mobile app
same problem here!!!
same probleme here,i'd try to install firmware ,hope it will work.
Check my guide there are instructions to flash and link to firmware
Related
Hi all,
I have D802 G2 that had stock rom and I've upgraded to the 4.4.2 KitKat with the following manual:
http://forum.xda-developers.com/showthread.php?t=2665985
This is a vodafone official rom which is suppose to be rooted.
How can I downgrade back to the original 4.2.2 stock rom?
I tried the LG R&D Recovery tool and loaded the 4.2.2 kdz file and turned my phone into download mode but it doesn't work.
It keeps on saying that my phone has the latest updates by LG, I wanna downgrade !!!
Anyone can help ???
111 8992332
Anyone help?
I'm interested in it too. You can try to follow this guide: http://forum.xda-developers.com/showthread.php?t=2432476
but i'm not sure if it is ok to downgrade (I think it's safe). I tried it but unfortunately I can't finish because of an error that is occurred and I didn't find any solution yet. So by now I still have 4.4.2.
I have same proble. any help?
Reset to Factory doesn't work as a method to roll back? Or does upgrading to Kitkat also upgrade the factory restore image?
Simo7 said:
I'm interested in it too. You can try to follow this guide: http://forum.xda-developers.com/showthread.php?t=2432476
but i'm not sure if it is ok to downgrade (I think it's safe). I tried it but unfortunately I can't finish because of an error that is occurred and I didn't find any solution yet. So by now I still have 4.4.2.
Click to expand...
Click to collapse
What error are you receiving? I just did it myself last and had no issues.
---------- Post added at 02:10 PM ---------- Previous post was at 02:08 PM ----------
Klotar said:
Reset to Factory doesn't work as a method to roll back? Or does upgrading to Kitkat also upgrade the factory restore image?
Click to expand...
Click to collapse
The factory restore image gets updated to kitkat. You have to use the guide Revert To Stock here on XDA and follow the instructions listed. Just follow them to a t and you'll be good to go. It's awfully hard to mess up. Even if you're not used to using methods like that it's easy peasy
---------- Post added at 02:13 PM ---------- Previous post was at 02:10 PM ----------
roeio82 said:
Hi all,
I have D802 G2 that had stock rom and I've upgraded to the 4.4.2 KitKat with the following manual:
http://forum.xda-developers.com/showthread.php?t=2665985
This is a vodafone official rom which is suppose to be rooted.
How can I downgrade back to the original 4.2.2 stock rom?
I tried the LG R&D Recovery tool and loaded the 4.2.2 kdz file and turned my phone into download mode but it doesn't work.
It keeps on saying that my phone has the latest updates by LG, I wanna downgrade !!!
Anyone can help ???
Click to expand...
Click to collapse
you aren't using the correct tool. Find the thread Revert to Stock here on the LG G2 forums and follow those instructions. You will be using the LG Flash tool. Not the R & D tool. That's a whole different animal that is used for updating software. Not downgrading. All that tool does is search the LG servers for software updates and starts the install for you if you cannot receive an OTA for some weird reason. I downgraded my AT&T d800 using the flash tool method and it takes about 10 mins and then you're back on 4.2.2
The link the other member posted is the correct method of downgrading.
BreakingVZW said:
What error are you receiving? I just did it myself last and had no issues.
Click to expand...
Click to collapse
Well, simply in the last passage, when I have to chose the language, I select "different language" but in the second menu there are no language. Can I start anyway?
Simo7 said:
Well, simply in the last passage, when I have to chose the language, I select "different language" but in the second menu there are no language. Can I start anyway?
Click to expand...
Click to collapse
That's the wrong tool. That's the LG support tool. You need to use the LG flashtool that is listed in the tutorial the other member posted a link to. You don't have to do anything with languages if you follow the instructions. The tool you're talking about is used for software updates. That doesn't let you downgrade.
Sent from my LG-D800 using XDA Premium 4 mobile app
I do it and now I'm on 4.2.2 thanks for answering
BreakingVZW said:
That's the wrong tool. That's the LG support tool. You need to use the LG flashtool that is listed in the tutorial the other member posted a link to. You don't have to do anything with languages if you follow the instructions. The tool you're talking about is used for software updates. That doesn't let you downgrade.
Sent from my LG-D800 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have a Bell G2 on 4.4.2 that I want to downgrade and install a custom recovery. Those instructions say to use the LG Flash tool but when I download it, I notice that the source says ATT/Sprint/Verizon only. What do I do?
scream_clarity said:
I have a Bell G2 on 4.4.2 that I want to downgrade and install a custom recovery. Those instructions say to use the LG Flash tool but when I download it, I notice that the source says ATT/Sprint/Verizon only. What do I do?
Click to expand...
Click to collapse
That I can't answer. I'm not sure if the At&t and bell images are compatible. I can almost guarantee they aren't. What you CAN do is just google search Bell LG G2 stock tot. I'm sure there would be either an xda link or a dev that had a repository of factory images for various models of the g2.
The easiest thing for you would be to search for your specific device model number (I.e. d800 which is the AT&T g2) tot. That should get you to the image you'd need for the flash tool.
Sent from my LG-D800 using XDA Premium 4 mobile app
I have tried searching for the tot file but there doesn't seem to be one for the Canadian variants. I have the 4.2.2 KDZ file though, can I just use the regular back to stock methods and flash it over my 4.4.2?
Edit: From what I see, only ATT/Sprint/Verizon models use the .tot and .dll method.
scream_clarity said:
I have tried searching for the tot file but there doesn't seem to be one for the Canadian variants. I have the 4.2.2 KDZ file though, can I just use the regular back to stock methods and flash it over my 4.4.2?
Edit: From what I see, only ATT/Sprint/Verizon models use the .tot and .dll method.
Click to expand...
Click to collapse
If you look in that revert to stock thread there is a link for the kdz method in there. Follow that and you should be golden. I forgot your variant didn't use tot
Sent from my LG-D800 using XDA Premium 4 mobile app
I tried it. Just got an error about extraction. I found a way to got recovery on here without downgrading though so we're good. Thanks.
Sent from my LG-D803 using XDA Premium 4 mobile app
scream_clarity said:
I tried it. Just got an error about extraction. I found a way to got recovery on here without downgrading though so we're good. Thanks.
Sent from my LG-D803 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
If I remember correctly the kdz method doesn't use the flash tool. It uses another method entirely. So if you got an error while attempting to use flash tools with kdz that'd be why.
Sent from my LG-D800 using XDA Premium 4 mobile app
I was using the R&D took for that. I followed the instructions exactly but no luck.
Sent from my LG-D803 using XDA Premium 4 mobile app
Simo7 said:
I do it and now I'm on 4.2.2 thanks for answering
Click to expand...
Click to collapse
u have sucees downgrad from 4.4.2 to 4.2.2 without proble?
---------- Post added at 01:04 AM ---------- Previous post was at 01:03 AM ----------
Simo7 said:
I do it and now I'm on 4.2.2 thanks for answering
Click to expand...
Click to collapse
BreakingVZW said:
If you look in that revert to stock thread there is a link for the kdz method in there. Follow that and you should be golden. I forgot your variant didn't use tot
Sent from my LG-D800 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
what happen if am use TOT?
chandarakk said:
u have sucees downgrad from 4.4.2 to 4.2.2 without proble?
---------- Post added at 01:04 AM ---------- Previous post was at 01:03 AM ----------
what happen if am use TOT?
Click to expand...
Click to collapse
Idk, world war three.
The member said his version uses kdz and not tot. If your model uses tot then use tot. I've found it vastly easier than kdz. Either way you go just make sure you follow the instructions exactly for whatever method you decide to use. Neither myself nor the devs whose method you decide to use is responsible if you somehow mess up your device. If you follow the directions to the letter you should be fine but if you're not comfortable doing this then please don't. XDA isn't tailored for noobs. It assumes you have at least general knowledge of android modifications. Not trying to come off harshly so please don't take it that way.
Sent from my LG-D800 using XDA Premium 4 mobile app
chandarakk said:
u have sucees downgrad from 4.4.2 to 4.2.2 without proble?
---------- Post added at 01:04 AM ---------- Previous post was at 01:03 AM ----------
what happen if am use TOT?
Click to expand...
Click to collapse
No problem with downgrade.
Inviato dal mio LG-D802 utilizzando Tapatalk
Simo7 said:
No problem with downgrade.
Inviato dal mio LG-D802 utilizzando Tapatalk
Click to expand...
Click to collapse
thank bro so mean it is not the same samsung? samsung 4.3 or 4.4.2 if we downgrad it no signal then LG no problem rite?
I have a SEA D802 32gb ,on cloudystock 1.3,and i want to go back to stock but i dont remember what was my stock firmware
Is there any method to discover the firmware by IMEI ? I dont want to brick my phone by installing the wrong one
..
lucasd28 said:
I have a SEA D802 32gb ,on cloudystock 1.3,and i want to go back to stock but i dont remember what was my stock firmware
Is there any method to discover the firmware by IMEI ? I dont want to brick my phone by installing the wrong one
Click to expand...
Click to collapse
....
I remember there was an lg related website which if you put your imei after the / it would tell you which firmware it's suppose to be on or download the kdz for I'll poke around see if I can find it
Sent from my LG-D800 running stock kk, rooted with philz using XDA app
---------- Post added at 07:36 PM ---------- Previous post was at 07:31 PM ----------
lucasd28 said:
I have a SEA D802 32gb ,on cloudystock 1.3,and i want to go back to stock but i dont remember what was my stock firmware
Is there any method to discover the firmware by IMEI ? I dont want to brick my phone by installing the wrong one
..
Click to expand...
Click to collapse
I think it was this one hxxp://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=xxxxxxxxxxxxxxx just replace the xxxxxxxx with your imei
Sent from my LG-D800 running stock kk, rooted with philz using XDA app
XxZombiePikachu said:
I remember there was an lg related website which if you put your imei after the / it would tell you which firmware it's suppose to be on or download the kdz for I'll poke around see if I can find it
Sent from my LG-D800 running stock kk, rooted with philz using XDA app
---------- Post added at 07:36 PM ---------- Previous post was at 07:31 PM ----------
I think it was this one hxxp://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=xxxxxxxxxxxxxxx just replace the xxxxxxxx with your imei
Sent from my LG-D800 running stock kk, rooted with philz using XDA app
Click to expand...
Click to collapse
Thanks,it worked!
For anyone with the same problem as I was,the file is: http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW955395432109876543213/D80220A_00.kdz
Does it really matter whether you install a, b, c etc.? I tried most of them and didn't see any issues running either one.
Sent from my LG-V500 using Tapatalk
I upgraded to kitkat via OTA. But due to audio noise problem I am looking to revert back to jellybean.
my phone previously had D80210F-SEA-XX (32GB). I can't find the JB .kdz flash file for my phone. I have come across D80210F-SEA-XX for 16GB but i cnt find the one for 32GB. Can someone here direct me to the link?
LG's csmg website only gives download link for the kitkat firmware of my phone.
faizy.13 said:
I upgraded to kitkat via OTA. But due to audio noise problem I am looking to revert back to jellybean.
my phone previously had D80210F-SEA-XX (32GB). I can't find the JB .kdz flash file for my phone. I have come across D80210F-SEA-XX for 16GB but i cnt find the one for 32GB. Can someone here direct me to the link?
LG's csmg website only gives download link for the kitkat firmware of my phone.
Click to expand...
Click to collapse
Voila! We both got same phone (32gb) and firmware! By any chance , did you find d80210f-sea-xx 32gb firmware ?
i need help after repair hard brick LG G2 D800 Imei null show
i flash wrong firmware on my device after i face fastboot started ...
i found solution on xda for fix fastboot after solve fastboot started phone enter in download mode
i flash with tot correct .. dll correct full flash done phone working fine but i face no service and imei null
i need solution there is any chance to solve that problem thanks in advance
imeicodes said:
i need help after repair hard brick LG G2 D800 Imei null show
i flash wrong firmware on my device after i face fastboot started ...
i found solution on xda for fix fastboot after solve fastboot started phone enter in download mode
i flash with tot correct .. dll correct full flash done phone working fine but i face no service and imei null
i need solution there is any chance to solve that problem thanks in advance
Click to expand...
Click to collapse
Root your phone using towel root and install autorec https://www.androidfilehost.com/?w=files&flid=13763 then you want to download and flash this custom recovery from http://blastagator.ddns.net/twrp.html . Next you will have to flash the modem for your device. Since I assume you are running KitKat download the 20y modem from here and install via twrp http://blastagator.ddns.net/modem.php
Sent from my LG-D800 using Tapatalk
---------- Post added at 06:37 AM ---------- Previous post was at 06:35 AM ----------
xmayhemreturnsx said:
Root your phone using towel root and install autorec https://www.androidfilehost.com/?w=files&flid=13763 then you want to download and flash this custom recovery from http://blastagator.ddns.net/twrp.html . Next you will have to flash the modem for your device. Since I assume you are running KitKat download the 20y modem from here and install via twrp http://blastagator.ddns.net/modem.php
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
Also, when you go to seeing and select software information does your baseband show up as unknown?
Sent from my LG-D800 using Tapatalk
---------- Post added at 06:53 AM ---------- Previous post was at 06:37 AM ----------
xmayhemreturnsx said:
Root your phone using towel root and install autorec https://www.androidfilehost.com/?w=files&flid=13763 then you want to download and flash this custom recovery from http://blastagator.ddns.net/twrp.html . Next you will have to flash the modem for your device. Since I assume you are running KitKat download the 20y modem from here and install via twrp http://blastagator.ddns.net/modem.php
Sent from my LG-D800 using Tapatalk
---------- Post added at 06:37 AM ---------- Previous post was at 06:35 AM ----------
Also, when you go to seeing and select software information does your baseband show up as unknown?
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
I forgot to say that you will have to install SuperSU and update the binary normally for root access
Sent from my LG-D800 using Tapatalk
thanks for reply i tried this method but it is not work ... same condition any other solution
Baseband .. Unknown ...
Imei .. Null
Root done
recovery done
imeicodes said:
Baseband .. Unknown ...
Imei .. Null
Root done
recovery done
Click to expand...
Click to collapse
This should flash the baseband, https://www.androidfilehost.com/?w=files&flid=12880
Sent from my LG-D800 using Tapatalk
i flash baseband which u posted on first post and after i install
Cloudy3.3 lollipop 5.0.1 u sure i flash this one https://www.androidfilehost.com/?w=files&flid=12880
and anyone have working solution for D800 ??/?
imeicodes said:
i flash baseband which u posted on first post and after i install
Cloudy3.3 lollipop 5.0.1 u sure i flash this one https://www.androidfilehost.com/?w=files&flid=12880
and anyone have working solution for D800 ??/?
Click to expand...
Click to collapse
Any luck?
Sent from my LG-D800 using Tapatalk
same problem imei null
stll waiting.................................
Hi All,
I need a little help here.
I have rooted my Zenfone 5 and installed Euphoria OS. But now i want to get back to stock. I have downloaded the latest lollipop firmware from Asus Website and followed the tutorial from Windroidica (Its for kitkat actually).
Revert back to zenfone 5 stock
But when i tried to sideload my firmware file in "Apply update from ADB", it starts opening update package, verifying update package when the file sent it only 2%. And when it reaches 52%, it starts installing package and aborts. No error message is displayed and the phone boots.
Can someone please help me with this. I am in a very bad position now.
Try flash lollipop firmware 78 version using kitkat v54 fastboot n recovery?have u try this?
mani0608 said:
Hi All,
I need a little help here.
I have rooted my Zenfone 5 and installed Euphoria OS. But now i want to get back to stock. I have downloaded the latest lollipop firmware from Asus Website and followed the tutorial from Windroidica (Its for kitkat actually).
Revert back to zenfone 5 stock
But when i tried to sideload my firmware file in "Apply update from ADB", it starts opening update package, verifying update package when the file sent it only 2%. And when it reaches 52%, it starts installing package and aborts. No error message is displayed and the phone boots.
Can someone please help me with this. I am in a very bad position now.
Click to expand...
Click to collapse
hi bro,
i had the same problem....flashing kitkat works.. see this linkhttp://www.asus.com/zentalk/forum.php?mod=viewthread&tid=69104
Thanks for the kind response. I did flash Kitkat and then lollipop. Everything worked and i am back to stock now. Thanks.
mani0608 said:
Thanks for the kind response. I did flash Kitkat and then lollipop. Everything worked and i am back to stock now. Thanks.
Click to expand...
Click to collapse
ypu should try Big_rom v10 remix. it is based on stock .87 firmware but having lots of features, i have also faced situation like you but i didn't went back on stock because i wanted new features in my zf5 now i am enjoying root phone. else upto you. my advice is free but free is not always useless
Sent from my ASUS_T00J using XDA-Developers mobile app
zsk.khan said:
ypu should try Big_rom v10 remix. it is based on stock .87 firmware but having lots of features, i have also faced situation like you but i didn't went back on stock because i wanted new features in my zf5 now i am enjoying root phone. else upto you. my advice is free but free is not always useless
Click to expand...
Click to collapse
Can you please share the link. I searched the forum and couldn't find it.
mani0608 said:
Can you please share the link. I searched the forum and couldn't find it.
Click to expand...
Click to collapse
https://docs.google.com/uc?id=0B72NTfPYQ4nIVzNYV1FtU2stQjA&export=download
Sent from my ASUS_T00J using XDA-Developers mobile app
---------- Post added at 08:14 PM ---------- Previous post was at 08:12 PM ----------
zsk.khan said:
https://docs.google.com/uc?id=0B72NTfPYQ4nIVzNYV1FtU2stQjA&export=download
Sent from my ASUS_T00J using XDA-Developers mobile app
Click to expand...
Click to collapse
download this zip file
before flashing this do wipe dalvik and cache after that flash ROM hereafter flash xposed.
Sent from my ASUS_T00J using XDA-Developers mobile app
---------- Post added at 08:17 PM ---------- Previous post was at 08:14 PM ----------
https://drive.google.com/file/d/0B9NtubSlVW8hMzlfZFdXUXZsX2s/view
Sent from my ASUS_T00J using XDA-Developers mobile app
mani0608 said:
Thanks for the kind response. I did flash Kitkat and then lollipop. Everything worked and i am back to stock now. Thanks.
Click to expand...
Click to collapse
great bro:good::good:
i am glad i was able to help you
Hi guys,
So yesterday i was trying to install the One UI rom to my S7 Edge, but i messed up in the process. I think the problem started when i installed the latest version of TWRP (twrp-3.3.0-0 i think), and then i reinstalled a previous version of TWRP over this one (twrp-3.2.3-0).
Anyway, after doing this my phone went into full bootloop with the logo "SAMSUNG S7 EDGE ...." on the screen. No big deal i thought, i'll just flash a stock rom with odin, but everytime that i try, i keep getting the same error "sboot.bin -> FAIL!".
I already tried :
- Using differents versions of odin, especially the latest (3.13.1)
- Downloading differents roms (marshmallow, nougat, lollipop)
- Using a different usb port
- Restarting my pc multiple times
This is the SM-G935F btw.
Thanks
Just flash the latest firmware via odin. Tell me you model number and I'll send you the link to what firmware you have to flash. Also tell me what firmware are you currently flashing which is giving error
Sent from my SM-N935F using Tapatalk
---------- Post added at 03:37 PM ---------- Previous post was at 03:36 PM ----------
Literally yesterday one more guy was in your same position but was able to boot his phone.
Sent from my SM-N935F using Tapatalk
---------- Post added at 11:43 AM ---------- Previous post was at 11:37 AM ----------
damsodems said:
Hi guys,
So yesterday i was trying to install the One UI rom to my S7 Edge, but i messed up in the process. I think the problem started when i installed the latest version of TWRP (twrp-3.3.0-0 i think), and then i reinstalled a previous version of TWRP over this one (twrp-3.2.3-0).
Anyway, after doing this my phone went into full bootloop with the logo "SAMSUNG S7 EDGE ...." on the screen. No big deal i thought, i'll just flash a stock rom with odin, but everytime that i try, i keep getting the same error "sboot.bin -> FAIL!".
I already tried :
- Using differents versions of odin, especially the latest (3.13.1)
- Downloading differents roms (marshmallow, nougat, lollipop)
- Using a different usb port
- Restarting my pc multiple times
This is the SM-G935F btw.
Thanks
Click to expand...
Click to collapse
Sorry I didn't see you already mentioned your model number.
https://www.sammobile.com/firmwares/galaxy-s7-edge/SM-G935F/XSA/download/G935FXXS4ESC1/267665/
Flash this via odin and everything should work.
UsmaniMustafa said:
Just flash the latest firmware via odin. Tell me you model number and I'll send you the link to what firmware you have to flash. Also tell me what firmware are you currently flashing which is giving error
Sent from my SM-N935F using Tapatalk
---------- Post added at 03:37 PM ---------- Previous post was at 03:36 PM ----------
Literally yesterday one more guy was in your same position but was able to boot his phone.
Sent from my SM-N935F using Tapatalk
---------- Post added at 11:43 AM ---------- Previous post was at 11:37 AM ----------
Sorry I didn't see you already mentioned your model number.
https://www.sammobile.com/firmwares/galaxy-s7-edge/SM-G935F/XSA/download/G935FXXS4ESC1/267665/
Flash this via odin and everything should work.
Click to expand...
Click to collapse
Oh ok, to be honest i don't know if it will work since i already tried a tons of roms already, but i'll give it a try and give you an update if it went well.
Thanks !
damsodems said:
Oh ok, i'll give it a try and give you an update if it went well.
Thanks!
Click to expand...
Click to collapse
On XDA we don't say thanks, just hit the thumbs up botton if I was able to help.
UsmaniMustafa said:
On XDA we don't say thanks, just hit the thumbs up botton if I was able to help.
Click to expand...
Click to collapse
Yeah sure no problem. Btw i think i was on the latest version available, which should be oreo.
damsodems said:
Yeah sure no problem. Btw i think i was on the latest version available, which should be oreo.
Click to expand...
Click to collapse
Yup that is why you are getting the sboot.bin error. It means the bootloader on your phone is newer than the one you are trying to flash. That's why it fails. On you phone screen you would have a error binary 4 device 5. Something like this.
Sent from my SM-N935F using Tapatalk
UsmaniMustafa said:
Yup that is why you are getting the sboot.bin error. It means the bootloader on your phone is newer than the one you are trying to flash. That's why it fails. On you phone screen you would have a error binary 4 device 5. Something like this.
Sent from my SM-N935F using Tapatalk
Click to expand...
Click to collapse
Yup that's right, that was the problem. I finally was able to flash the phone back to stock.
Thanks for the help.