Hey guys,
I unfortunately bricked my device:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Information from the top left corner:
ODIN MODE
PRODUCT NAME: GT-I9505
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enable
eMMC BURST MODE enabled
The center text:
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
The current ROM was Dirty Unicorn Lollipop and I wanted to flash the original samsung firmare.
After I flashed my phone restarted like this. I tried some things to flash via odin now, even my phone won't boot into recovery again.
Could someone help me what to do now? As I said I tried a few things from other guys with like the same problem.
I downloaded a package "I9505XXUHOA7_OXAHOA7" with CP, AP, CSC, PIT and BL but it didn't work as well.
Sincerely,
mrclaver
Flashing a stock ROM via Odin, with the ROM loaded in the BL slot, should restore your S4. You'll want to check your cable and make sure it's the original, and that it's plugged into the computer, not a hub. Use a different port if necessary.
Would you be so kind to give me a link to a rom you suggest I should try? Because the original ones I downloaded had five different files.
Sent from my SM-G900F using XDA Free mobile app
The rom should be only one of the files. The other files are something else.
Generally, you can get stock roms from sammobile. But their download speeds are excruciatingly slow..
GDReaper said:
The rom should be only one of the files. The other files are something else.
Generally, you can get stock roms from sammobile. But their download speeds are excruciatingly slow..
Click to expand...
Click to collapse
Yeah, but which file is necessary for flashing via odin? CP, AP, CSC, BL? AP is for PDA I think.
Sent from my SM-G900F using XDA Free mobile app
The .tar.md5 file. Put it into AP to flash.
Strephon Alkhalikoi said:
The .tar.md5 file. Put it into AP to flash.
Click to expand...
Click to collapse
This is what odin says:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I9505XXUHOA7_CL3996895_QB3867680_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
This was after I tried to flash the ap file in PDA.
This is the official rom: I9505XXUHOA7_OXAHOA7
And these are the files which were in there:
I was thinking of using antoher usb port maybe? I hope it'd be that easy.
Odin is telling you that you have no PIT partition. That means you'll need to use a PIT file with the 2.4GB MD5 file in AP to flash. The PIT file can be found on the forums, along with instructions for using it.
mrclaver said:
This is what odin says:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I9505XXUHOA7_CL3996895_QB3867680_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
This was after I tried to flash the ap file in PDA.
This is the official rom: I9505XXUHOA7_OXAHOA7
And these are the files which were in there:
I was thinking of using antoher usb port maybe? I hope it'd be that easy.
Click to expand...
Click to collapse
In 99% of the cases that error is caused by using a "wrong" usb port. Try all the ports on your pc and/or try a different usb cable.
You guys are awesome! It really was a wrong usb port! I tried then with AP in PDA but it wasn't successfull. So I decided to use all four files (AP, CSC, CP and BL). It took more than 10 minutes in odin but then it finally started! Thank you so much! Thread can be closed!
@Lennyz1988: I did mention switching USB ports, but I forgot to remind mrclaver of that. So leave it to me to forget the obvious.
@mrclaver: Glad everything worked out.
Related
Sorry of my poor English but because, which is only a translation of google. But i can read and understand english.
Unfortunately I am in despair, because apparently I shot my note. So you are my last hope.
Do not worry, I do not expect that Rocket-ROM was the cause, but still my note do not want.
I had recently been used the very cool Rocket V8, and then install the game from Gameloft M99. At the first call about the game loads down 1100MB, or rather it wants. So did release my misery, because every time at 70 MB to 100 MB, the note went into the SoD, and could only be by a long press the power button to move to restart. After several attempts to download via Wi-Fi yet to get out, then the my note shows only in the boot animation and stayed there seemingly stuck in a loop (until min to 30. Wait). Several attempts later, I tried in recovery-mode to delet cache and Davlik, but also did not lead to success. I then tried a in the recovery a full wipe-making, where the note was then stuck too (also up to 30 min. Wait).
Since this has not brought anything, I wanted to flash with Odin 3 (1.85) a stock-ROM (N7000XXKKA_N7000XEUKK3_N7000XXKK5_HOME.tar.md5), but in Odin "<ID:0/003> NAND Write Start!" remains standing.
I have at thecond trie to flash a three part ROM, but the log-screen from odin shows following:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_N7000XXKJ1_CL627135_REV02_user_low_ship.tar.m d5 is valid.
<OSM> MODEM_N7000XXKJ1_REV_05_CL1067428.tar.md5 is valid.
<OSM> GT-N7000-MULTI-CSC-OXAKJ1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Sbl.bin
...... and ........ stands and stands and stands .......... ...........
I have also tried to flash just a kernel, with the same result. Even my attempt to redefine the partitions (with suitable PIT) and then flash the firmware ends similarly, that confirms (again for 30 minutes waiting and nothing is happening.)
<OSM> Check MD5 .. Thurs unplug not the cable ..
<OSM> Please wait ..
<OSM> N7000XXKKA_N7000XEUKK3_N7000XXKK5_HOME.tar.md5 is valid.
Checking MD5 <OSM> Successfully finished ..
Leave <OSM> CS ..
<ID:0/003> Odin v.3 engine (ID: 3) ..
File <ID:0/003> analysis ..
<ID:0/003> Setup connection ..
<ID:0/003> Initialzation ..
Set PIT <ID:0/003> file ..
DO NOT TURN OFF TARGET <ID:0/003>!
I hope someone of you has an idea, because I really could cry!
P.S. CWM now I'm no longer pure, normal boot will stand with the Samsung logo. Download mode goes. The DL-counter shows number 1.
if you can go to download mode again your note is not killed
try to do same ones more time
it has to go right
did you do like this ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note sure if I got it right but it sounds liek you can still boot into recovery. Have you made Backup which you can restore?
I've already tried countless times today over again, even with PIT for the repartitioning.
If I use a PIT in the Flash plug operation stucks after the PIT.
In the recovery-mode can't I'm no longer, and my backups I have on the external SD moved.
I guess you put the phone into ODIN-mode by holding Vol- + midle key + On/Off right?
I have not had this before.. so you could try to flash again via ODIN that way.. in case you have not tried already. Not sure if KIES will communicate with the Note in ODIN mode. But also this would be worth a try.
thommic said:
I guess you put the phone into ODIN-mode by holding Vol- + midle key + On/Off right?
I have not had this before.. so you could try to flash again via ODIN that way.. in case you have not tried already. Not sure if KIES will communicate with the Note in ODIN mode. But also this would be worth a try.
Click to expand...
Click to collapse
1. So i have it do anytime.
2. Kies will not communicate with my Note in Odin-Mode.
A normal boot without push of the key-comnbination, let the note show the screen with smartphone ... "exclamation mark" ... PC.
try to download this rom
http://hotfile.com/dl/135702954/9c9d385/N7000XXKKA_N7000OXXKK6_XEO.zip.html
then thick PDA in odin
then put your note in download mode(odin mode) vol down+home+off button
then push start in odin
I have try it, but the result is:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKKA_N7000OXXKK6_N7000XXKK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
and here stop the flash.
I give the Note back to Amazon.
pctelco said:
I have try it, but the result is:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKKA_N7000OXXKK6_N7000XXKK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
and here stop the flash.
I give the Note back to Amazon.
Click to expand...
Click to collapse
just do a factory reset/clean install:reinstall all the sofware maybe its damaged..format your sd...and install a stock rom
Nicht zurück geben !!!
Follow this instruction
http://jjpda.blogspot.com/2011/11/n7000-how-to-flash-n7000zskk1-236.html
nowy57 said:
try to download this rom
http://hotfile.com/dl/135702954/9c9d385/N7000XXKKA_N7000OXXKK6_XEO.zip.html
then thick PDA in odin
then put your note in download mode(odin mode) vol down+home+off button
then push start in odin
Click to expand...
Click to collapse
First of all make sure the Kies is installed on your computer correctly. If the USB Samsung Drivers are corrupted ODIN will not be able to access Note properly! I would try to uninstall and install Kies again. Good luck!!!!
Haddar said:
First of all make sure the Kies is installed on your computer correctly. If the USB Samsung Drivers are corrupted ODIN will not be able to access Note properly! I would try to uninstall and install Kies again. Good luck!!!!
Click to expand...
Click to collapse
exactly !!
if you are not shure reinstal kies once more time by the newest version of kies
gerardroid said:
just do a factory reset/clean install:reinstall all the sofware maybe its damaged..format your sd...and install a stock rom
Click to expand...
Click to collapse
I can't do that. I came only in the DL-Mode, but not in CWM!
I would like to do so, but i can't.
Maybe this can help:
http://www.ebay.com/itm/UnBrick-USB...937128?pt=PDA_Accessories&hash=item3a6dc827e8
gerardroid said:
just do a factory reset/clean install:reinstall all the sofware maybe its damaged..format your sd...and install a stock rom
Click to expand...
Click to collapse
budalica said:
Nicht zurück geben !!!
Follow this instruction
http://jjpda.blogspot.com/2011/11/n7000-how-to-flash-n7000zskk1-236.html
Click to expand...
Click to collapse
Sorry, but this ended by the same results, then all my other tries to rescue my note.
I have no other option than to send the note back to Amazon.
pctelco said:
Sorry, but this ended by the same results, then all my other tries to rescue my note.
I have no other option than to send the note back to Amazon.
Click to expand...
Click to collapse
The ebay dongle supposedly works...
I have no problem in the DL mode to come, which should help me the USB JIG then?
Unfortunately I can not flash ROM with Odin, because it is always aborted.
@ hotweiss
You're right, supposedly!!?
Would have been interesting but the use of USB-JIG @ SGN is still ****ty.
edit:
@ pctelco
I wrote it already in another forum.
An USB-JIG can unbrick you phone. Can!
The procedure might go like this:
http://www.pocketpc.ch/galaxy-note-...tfernen-flashcounter-reseten.html#post1250472
I know this might seem pointless but it helped me before. Very simple step is unplug phone and do a complete shutdown(not restart) of your computer.
Restoring A Stuck Samsung Galaxy SI, SII and SIII
Is your phone stuck like this?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then read on! If not, this may only be useful for those who want to go back to the original Samsung Firmware.
Introduction
Too many people are getting stuck on the Samsung logo so I decided to make a tutorial on how to
get yourself off it. It is a simple tutoiral and noob friendly, but it will take time and patience because
the stock firmware is not just 300mb but can go into 1GB and more. This should on Samsung
Galaxy SI, SII, SIII. They are all tested and working, you may experiment on other phones if you
wish and you have no other choice. Read on for the downloads and instructions.
Downloads
Odin v3.07 - Click Here
Your Firmware - Find Here
Instructions
1. Go here and select your phone and its correct version's official firmware here: http://samsung-updates.com/latest-firmware/
2. Download Odin v3.07
3. Turn phone off completely and put it into download mode (Down Volume, Home Button and Power Button together).
4. After downloading the official firmware extract it and open Odin.
5. Select Auto Boot and F. Reset and put that .md5 file in the PDA section. NOTE: There should be COM: (PORT NUMB) in the first box.
6. Click Start and wait. If it succeeded then it will say PASS in green.
NOTE: This has worked for me and other people have confirmed it working for them after testing.
But if something more happens to your phone, I am not responsible.
Good luck.
Will be attaching more tutorials soon.
Sent from my GT-I9300 using xda premium
This is just a stock firmware flash via Odin as per multiple guides on the forum .
Its not getting off a stuck logo its re flashing full firmware in many cases a factory reset should be the first step or a reflash through recovery of the custom rom .
Multiple exact same guides in my view only confuse noobs .
jje
JJEgan said:
This is just a stock firmware flash via Odin as per multiple guides on the forum .
Its not getting off a stuck logo its re flashing full firmware in many cases a factory reset should be the first step or a reflash through recovery of the custom rom .
Multiple exact same guides in my view only confuse noobs .
jje
Click to expand...
Click to collapse
Got me off stuck on a logo.
Sent from my GT-I9300 using xda premium
AndroidPlant said:
Got me off stuck on a logo.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
A wipe data often fixes that too, if you have custom recovery,a dalvik/cache wipe could potentially fix it.
A re-flash of the Rom could fix it
.....indeed many things "could" fix it........I know your intentions are good, but could you refrain from posting links to this thread every time a problem comes up, because often the solution is much easier
There doesn't seem to be any i9300 firmwares on that site.
Hi, im doing everything as it says but gives me this
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-m0-m0xx-gti9300.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1005)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> recovery.img
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help me
Try different USB cables and USB ports. Try flashing the latest stock ROM from sammobile.com.
help plz
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGOF1_I9300OXXGOF1_I9300XXUGNB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> tz.img
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Cant pass this part.
audit13 said:
Try different USB cables and USB ports. Try flashing the latest stock ROM from sammobile.com.
Click to expand...
Click to collapse
Yes, i've already done that still nothing.
Could it be hardware related issue?
You confirmed the model # in download mode? It fails with the original Samsung usb cables too?
OK first off I going to express my deepest apologies for starting a thread with an issue that has probably been answered 100 times... My problem is that I have tried every possible phrase that I know for search term pertaining to my particular issue and I am still stuck. SO I will be as details as possible and I hope and pray that at LEAST if I get kicked for starting this and the thread being shutdown, that someone will have posted "heres the link numb nuts be more careful next time".
OK so on with my issue. I have a Rogers Samsung Galaxy S4 I337M on 4.3, I tried to use chainfire's latest cf-Autoroot to root my phone and it just failed. Here is the log:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jfltecan-jfltevl-sghi337m.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
As you can see when odin could not find the PIT I downloaded one and retried.
Anyway now I'm stuck on this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and the top left may be important so here is the clearest shot of that:
Now I have tried to flash stock firmware that I downloaded from sammobile AND samsung update and no matter how many times I try to flash its the same thing over and over again (log):
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337MVLUEMK6_I337MOYAEMK6_I337MVLUEMK6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
I then thought about trying Kies. First problem, Emergency firmware did not list my device. Then I tried firmware upgrade and initialize and even though the start button wouldn't show unless I plugged the phone in as download mode, once the firmware was finished downloading and ready to flash it would give me an error saying it couldn't not detect my device.
I am not sure is this is EVERYTHING I could have tried but to MY knowledge it is. Please help
And my deepest gratitude to anyway and all who point me to the right direction. I hope I have been as detailed as I possibly can be.
djkaozz said:
And my deepest gratitude to anyway and all who point me to the right direction. I hope I have been as detailed as I possibly can be.
Click to expand...
Click to collapse
Point you to the right direction, huh? How about the Q&A, Help & Troubleshooting subforum? Posting questions like this in the development subforum is a no-no.
mattdm said:
Point you to the right direction, huh? How about the Q&A, Help & Troubleshooting subforum? Posting questions like this in the development subforum is a no-no.
Click to expand...
Click to collapse
This is a start, my apologies AND a big thank you!
i encountered this before. although i cannot remember how i fixed it. few things to try though.
option A: download a stock rom from sammobile it is pretty straight forward on the site to select the correct stock rom. be careful when selecting though. make sure you get the correct version to match the bootloader. ex download the 4.4.2 stock rom from rogers if you had 4.4.2. the rom from sammobile is odin flash only. so put it in the pda and make sure your phone is in download mode if you can get to it
option B: if you cant get to download mode then you will have to try the firmware emergency recovery option on the actual samsung keis program. I cannot remember the steps for this but a google search should give directions
if either of these work you will be brought back to square one where you can start the root process over again. this time try a different rooting method. just incase.
Buddyjohn said:
i encountered this before. although i cannot remember how i fixed it. few things to try though.
option A: download a stock rom from sammobile it is pretty straight forward on the site to select the correct stock rom. be careful when selecting though. make sure you get the correct version to match the bootloader. ex download the 4.4.2 stock rom from rogers if you had 4.4.2. the rom from sammobile is odin flash only. so put it in the pda and make sure your phone is in download mode if you can get to it
option B: if you cant get to download mode then you will have to try the firmware emergency recovery option on the actual samsung keis program. I cannot remember the steps for this but a google search should give directions
if either of these work you will be brought back to square one where you can start the root process over again. this time try a different rooting method. just incase.
Click to expand...
Click to collapse
the problem is i did this and no matter what i am getting the results that are posted in the log above.
any other suggestions out there?
i appreciate the responses so far. thank you
Did you try the option that doesn't involve Odin? Also try changing USB cables
Sent from my SGH-I337M using Tapatalk
Use a different computer?
Adizzzle said:
Use a different computer?
Click to expand...
Click to collapse
thats another option i have tried to no success. it seems that even with the pit file its failing but no reason as to why
FIXED!!
djkaozz said:
thats another option i have tried to no success. it seems that even with the pit file its failing but no reason as to why
Click to expand...
Click to collapse
wow.... i fixed it... the solution is SO STUPID that embarrassed to say it.
Help
djkaozz said:
wow.... i fixed it... the solution is SO STUPID that embarrassed to say it.
Click to expand...
Click to collapse
Do you remember what you did? Because i have the same problem
Winston.huang said:
Do you remember what you did? Because i have the same problem
Click to expand...
Click to collapse
i have the same problem. please do share!
Had the same problem. I was finally able to complete the update only after I inserted a SIM card and rebooted my computer.
djkaozz said:
wow.... i fixed it... the solution is SO STUPID that embarrassed to say it.
Click to expand...
Click to collapse
Are you for real? I have the same Canadian model as you, EXACT same problem and you find a solution and don't post it... Thanks bro, RIP Harambe
The problem was probably fixed by flashing a stock rom via Odin, factory wipe, and set up the rom.
Hello
I'm not sure if I'm doing this right so any help would be grateful. I currently have stock firmware installed and I'm trying to remove root from my phone. I searched around and it was suggested to reinstall stock firmware.
So I downloaded a stock rom from this thread, (UK_20H3G_20G900FXXU1ANE2_G900FH3G1AND4_H3G.zip - 1411.3 Mb - (because I'm on Three)) downloaded Odin, ran Odin, stuck my phone into download mode, loaded the firmware into Odin by clicking the PDA button, checked Auto Reboot and then hit start.
Here are the results;
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1ANE2_G900FH3G1AND4_G900FXXU1ANE2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> aboot.mbn
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I'm tried this about 3-4 times and I'm getting the same result each time.
What am I doing wrong?
Thanks.
Possible useful info?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
_McShane_ said:
Hello
I'm not sure if I'm doing this right so any help would be grateful. I currently have stock firmware installed and I'm trying to remove root from my phone. I searched around and it was suggested to reinstall stock firmware.
So I downloaded a stock rom from this thread, (UK_20H3G_20G900FXXU1ANE2_G900FH3G1AND4_H3G.zip - 1411.3 Mb - (because I'm on Three)) downloaded Odin, ran Odin, stuck my phone into download mode, loaded the firmware into Odin by clicking the PDA button, checked Auto Reboot and then hit start.
Here are the results;
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1ANE2_G900FH3G1AND4_G900FXXU1ANE2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> aboot.mbn
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I'm tried this about 3-4 times and I'm getting the same result each time.
What am I doing wrong?
Thanks.
Possible useful info?
Click to expand...
Click to collapse
my friend, im sure if you created the thread in Q&A forum
you will got the answer, next time questions can be ask in Q&A 's forum , you will probably have the answer of your problem
Anyone?
Hi Guys .. Can you help me please? i have a problem with my Sprint Galaxy S4..
I tried to install a custom Rom and now is BLOCKED "Firmware upgrade encountered..." when i start Phone..
Now the only one solution is flashing with Odin right? But why Odin always FAIL ? I installed Drivers , i tried a lot of Firmwares .. From sammobile .. No one works ..
Also I tried this ROM http://forum.xda-developers.com/showthread.php?p=49213024#post49213024
LOOK some logs on ODIN when it FAILSSS
Code:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUEMK2_L720SPTEMK2_L720VPUEMK2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> sbl2.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl3.mbn
<ID:0/007> rpm.mbn
<ID:0/007> aboot.mbn
<ID:0/007> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Please help me .. How can i flash with ODIN ?
malefiCz said:
Hi Guys .. Can you help me please? i have a problem with my Sprint Galaxy S4..
I tried to install a custom Rom and now is BLOCKED "Firmware upgrade encountered..." when i start Phone..
Now the only one solution is flashing with Odin right? But why Odin always FAIL ? I installed Drivers , i tried a lot of Firmwares .. From sammobile .. No one works ..
Also I tried this ROM http://forum.xda-developers.com/showthread.php?p=49213024#post49213024
LOOK some logs on ODIN when it FAILSSS
Code:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUEMK2_L720SPTEMK2_L720VPUEMK2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> sbl2.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl3.mbn
<ID:0/007> rpm.mbn
<ID:0/007> aboot.mbn
<ID:0/007> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Please help me .. How can i flash with ODIN ?
Click to expand...
Click to collapse
What was your baseband before starting this process?
mattzeller said:
What was your baseband before starting this process?
Click to expand...
Click to collapse
Now i tried to FLASH latest version from sammobile
take a look at this SS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please help me guys .. is 1 week now since i'm trying to fix this S4
malefiCz said:
Now i tried to FLASH latest version from sammobile
take a look at this SS
Please help me guys .. is 1 week now since i'm trying to fix this S4
Click to expand...
Click to collapse
Try a different cable or port on the computer
bilgerryan said:
Try a different cable or port on the computer
Click to expand...
Click to collapse
I tried 5 cables .. i tried all PORTS + Used another PC ...
What's the problem ... I Don't understand ..
malefiCz said:
I tried 5 cables .. i tried all PORTS + Used another PC ...
What's the problem ... I Don't understand ..
Click to expand...
Click to collapse
Did you give Odin Administrator permissions? Right click on it and hit Run As Administrator.
bilgerryan said:
Did you give Odin Administrator permissions? Right click on it and hit Run As Administrator.
Click to expand...
Click to collapse
OF COURSE bro ! .... Still nothing .. unbelievable !
Your screenshot of Odin says your PIT Partition is missing. Sorry, I missed that earlier because it didn't show up in Tapatalk. I thought I saw somebody post the PIT file recently, try searching for it.