Database Users

recovery help me !! p700 jenkins 02/06/2013 (french)

how to install the recovery available in the archive jenkins (02/june/2013)
I have half my mobile debug mode enabled, the app authorization from adb mode develop, I run the flash, the phone turns off and then back on it and I run boot-on-recovery, and impossible to access the recovery, mobile bug affects flash.
P.S : je parle francais..

Reativaction Lock ON | No menu for samsung login

Good morning people. I'm using google translator, I hope you understand my problem.
Was wearing that rom, XtreStoLite 2.2 to G900M.
The problem I'm facing is this:
1. My system does not have the reativaction lock menu.
2. I can not access the recovery because a message appears saying "Fail Secure: Recovery".
3. I can not install anything at ODIN concerning PDA. Only BL, CSC, etc. Message appears saying "secure check fail recovery"
How do I reinstall this menu to be able to log in and release the Samsung recovery?
:crying:

flash via recovery stock based rom

How?

Flash a stock KitKat ROM using ODIN, log into all accounts, disable reactivation lock

*Detection* said:
Flash a stock KitKat ROM using ODIN, log into all accounts, disable reactivation lock
Click to expand...
Click to collapse
Essa mensagem, "secure check fail: recovery", aparece sempre que tento fazer algo pelo PDA|AP. Só testei com arquivos de recovery, mas não acham que vá aparecer pra firmware também? =[

*Detection* said:
Flash a stock KitKat ROM using ODIN, log into all accounts, disable reactivation lock
Click to expand...
Click to collapse
This message, "secure check Fail: recovery" appears whenever I try to do something for PDA | AP. Only tested with recovery files, but do not think that goes to show firmware too? = [

It worked. I have no words to thank you. Thank you for hand. You are the best.

:good:

Custom Binary Blocked by FRP Lock

After installing Super user through TWRP, my Phone: Galaxy Grand Prime 4G Dual SIM, SM-G531H encountered a problem in recovery mode
and says "Custom Binary Blocked by FRP Lock" and it is not booting.
1. Tried to flash using ODIN v3.10, while flashing it stucks at FRP Lock and fails the flashing process.
2. Tried Kies3, but it cannot identify my S/N
Please help me
Thanks you

pradeep.sl said:
After installing Super user through TWRP, my Phone: Galaxy Grand Prime 4G Dual SIM, SM-G531H encountered a problem in recovery mode
and says "Custom Binary Blocked by FRP Lock" and it is not booting.
1. Tried to flash using ODIN v3.10, while flashing it stucks at FRP Lock and fails the flashing process.
2. Tried Kies3, but it cannot identify my S/N
Please help me
Thanks you
Click to expand...
Click to collapse
The G531H is a dual sim model yes, but it is NOT 4G, it is a 3G only model.
FRP lock can be solved by reflashing to stock firmware (You'll need to make an account: https://samsung-firmware.org/download/GALAXY GRAND Prime/t1s5/UPO/G531HUBU0APE2/G531HUUB0APE2/ -Download an older one if that doesnt work. Also thats the uruguay firmware so double check for your country too)
- Use ODIN to flash this, it should work fine with v3.10. Click PDA or AP (Depending on ODIN) and add the firmware.
Then after setting up your phone, go to settings->about-> tap build number 7 times to activate developer options.
press the back key->developer options->enable manufacturer unlock. (NEVER UNTICK THIS UNLESS YOUR RUNNING UnROOTED STOCK)
Flash TWRP as normal, then flash flash the supersu.zip thats available here on the forums.
Hope it helps!

u0aol said:
The G531H is a dual sim model yes, but it is NOT 4G, it is a 3G only model.
FRP lock can be solved by reflashing to stock firmware (You'll need to make an account: https://samsung-firmware.org/download/GALAXY GRAND Prime/t1s5/UPO/G531HUBU0APE2/G531HUUB0APE2/ -Download an older one if that doesnt work. Also thats the uruguay firmware so double check for your country too)
- Use ODIN to flash this, it should work fine with v3.10. Click PDA or AP (Depending on ODIN) and add the firmware.
Then after setting up your phone, go to settings->about-> tap build number 7 times to activate developer options.
press the back key->developer options->enable manufacturer unlock. (NEVER UNTICK THIS UNLESS YOUR RUNNING UnROOTED STOCK)
Flash TWRP as normal, then flash flash the supersu.zip thats available here on the forums.
Hope it helps!
Click to expand...
Click to collapse
It worked Thank you So much (Y)

pradeep.sl said:
It worked Thank you So much (Y)
Click to expand...
Click to collapse
Your very welcome, I'm glad it helped!

SM-G530T does not support initialization from my end.
Don't know what else i must do to get this done.
Can anyone help me out with this?

Nao passa disto , alguem sabe ajudar
It is not system. img i started the cable at the time because it was taking a while and i went to reboot the installation
, Version: G531BT Grand Prime
Do not pass this, someone knows how to help.

Igor ShakiroNeo said:
It is not system. img i started the cable at the time because it was taking a while and i went to reboot the installation
, Version: G531BT Grand Prime
Do not pass this, someone knows how to help.
Click to expand...
Click to collapse
FRP Lock is enabled when you have a google account on your phone and if you modified your boot or recovery. To disable FRP, either remove the google account or restore the stock boot.img and/or the recovery.img if you modified it.

Nemirtingas said:
FRP Lock is enabled when you have a google account on your phone and if you modified your boot or recovery. To disable FRP, either remove the google account or restore the stock boot.img and/or the recovery.img if you modified it.
Click to expand...
Click to collapse
this I make it hangs and it does not go on. I get a 10 minute wait and it stopped in system.img. I already installed recovery.img or boot.img. when it arrives in system.img it is stopped

Igor ShakiroNeo said:
this I make it hangs and it does not go on. I get a 10 minute wait and it stopped in system.img. I already installed recovery.img or boot.img. when it arrives in system.img it is stopped
Click to expand...
Click to collapse
Then if you flashed recovery, can you boot into recovery ? If you can, then try to use sideload from recovery and restore your system.
If Odin stop when flashing system.img, check your USB wire, download an up to date Odin & Stock firmware, maybe your Firmware is corrupted somewhere.

I've been installing the frp locked twrp I do not know what the correct name is. AND
* I found an original cable there at home Samsung I do not know I'm believing it's cable I'll try to do it now. This Side load I'm afraid that it works the same twrp by and frp does not accept frp official program is blocking!
Does it work if I try to install it by the memory card or SD card?

Igor ShakiroNeo said:
I've been installing the frp locked twrp I do not know what the correct name is. AND
* I found an original cable there at home Samsung I do not know I'm believing it's cable I'll try to do it now. This Side load I'm afraid that it works the same twrp by and frp does not accept frp official program is blocking!
Does it work if I try to install it by the memory card or SD card?
Click to expand...
Click to collapse
If you have access to your phone, you can zero you PERSISTENT partition (that's how its called on my phone), its where android saves the FRP blocking infos. By zeroing it, you can run anything like before till google play service rewrite it again. I just do dd if=/dev/zero of=/dev/block/platform/soc.2/by-name/PERSISTENT, and I can boot to TWRP, but if I start phone to system, PERSISTENT gets rewritten again and then FRP lock turns on again, but I just made a script that runs when I shutdown phone that zero this partition so I don't have FRP anymore. :good:

No meu caso aqui eu preciso só instalar um Android que não está sendo restaurado ele trava no quando eu fecho ele ele não trava ele fica parado e não anda mais. Eu abro o Odin instalar boot recovery chegar na System link ele não passa ele fica parado carregando eu acho que é o cabo será
In my case here I only need to install an Android that is not being restored it locks in when I close it it does not lock it it stops and it does not walk anymore. I open Odin install boot recovery get on the System link it does not pass it stands still loading I think it's the cable will be.
Aqui eu só tenho acesso ao recovery e modo download no meu caso aqui tem alguma chance? e não tem depuração ativado não tem root eu tenho chance de restaurar conseguir salvar meu celular?
Here I only have access to recovery and download mode in my case here has any chance? and does not have debugging enabled does not have root do i have chance to restore able to save my cell phone?

Igor ShakiroNeo said:
No meu caso aqui eu preciso só instalar um Android que não está sendo restaurado ele trava no quando eu fecho ele ele não trava ele fica parado e não anda mais. Eu abro o Odin instalar boot recovery chegar na System link ele não passa ele fica parado carregando eu acho que é o cabo será
In my case here I only need to install an Android that is not being restored it locks in when I close it it does not lock it it stops and it does not walk anymore. I open Odin install boot recovery get on the System link it does not pass it stands still loading I think it's the cable will be.
Aqui eu só tenho acesso ao recovery e modo download no meu caso aqui tem alguma chance? e não tem depuração ativado não tem root eu tenho chance de restaurar conseguir salvar meu celular?
Here I only have access to recovery and download mode in my case here has any chance? and does not have debugging enabled does not have root do i have chance to restore able to save my cell phone?
Click to expand...
Click to collapse
You last chance may be the QCOM Tools to reflash your phone at very low Level.

Nemirtingas said:
You last chance may be the QCOM Tools to reflash your phone at very low Level.
Click to expand...
Click to collapse
Where do I find this? It's for samsung!

Igor ShakiroNeo said:
Where do I find this? It's for samsung!
Click to expand...
Click to collapse
Ha G531BT is a Marvell SoC, my bad x). Your only chance is to update your samsung drivers, Update Odin, download a fresh firmware and flash your phone. Don't touch the wire while flashing.

I give up I'm going to leave here, even if it's an hour to 5 hours, if I'm not going to sell the pieces

L31 Bricked After being returned to the stock after a flash of cyanogenmod

Hello,
I'm french, this message is translated by reverso :
I had cyanogenmod and I wanted to return to the stock. For that purpose, I just put the update.app in the file(case) / dload / of the card(map) sd then I am to remain pressed on 3 buttons to install(settle) him(it), instalation with no problem at all, but the démmarage lasts infinitely.... I can reinstall but it's always the same, I do not manage to go in the bootloader or in the recovery
Please help me !
RESOLVED ! THANKS
Thanks
If you need more information, ask me
-----
Original message :
J'avais cyanogenmod et j'ai voulu retourner au stock. Pour cela, j'ai juste mis le update.app dans le dossier /dload/ de la carte sd puis je suis rester appuyé sur les 3 boutons pour l'installer, instalation sans problème, mais le démmarage dure infiniment .... Je peut réinstaller mais c'est toujours pareil, je n'arrive pas à acceder au bootloader ou au recovery
----

I'm not an expert, but I think that you have to install the stock recovery first.
Sent from my HUAWEI VNS-L31 using XDA-Developers mobile app

Try to boot in recovery, then wipe data/factory reset

Potato997 said:
Try to boot in recovery, then wipe data/factory reset
Click to expand...
Click to collapse
Yes but how ?
The fastboot mode simply reboot the phone (don't appear)
The recovery install directly the update, and if i remove the sdcard, he say "Software update failed, please redownload the file (Normal because there is not any more the file update.app)
And i can't shutdown my phone
I waits that it is no more battery
;(

Is your bootloader unlocked? If yes you can try to flash TWRP

Potato997 said:
Is your bootloader unlocked? If yes you can try to flash TWRP
Click to expand...
Click to collapse
The bootloader is relocked, but i can't boot in fastboot mode
If i can boot in fastboot mode, All my problems are settled.
I have booted in huawei recovery
I do i wipe data/factory reset
I tell you if its work
Its boot with the sound *
It booted and it work
Thanks
I have hold the vol+ and power button with no sd

I had the same problem but I managed to boot in fastboot simply by having the phone plugged to the pc (power+vol down)

unlock bootloader failed

hi
during a firmware update i have a error message
since i can't start my p9lite
this phone stay at the huawei logo's
i have no access to the erecovery but i have access to fastboot rescue mode
ihave green phone locked and frp lock
i can't unlock my bootload with my code i have systematicaly failed info
do you have a solution for me?
ps i'm french so excuse me for my bad english
regard's

ced43 said:
hi
during a firmware update i have a error message
since i can't start my p9lite
this phone stay at the huawei logo's
i have no access to the erecovery but i have access to fastboot rescue mode
ihave green phone locked and frp lock
i can't unlock my bootload with my code i have systematicaly failed info
do you have a solution for me?
ps i'm french so excuse me for my bad english
regard's
Click to expand...
Click to collapse
Dload or rollback package then rom

you need indicate your build number, if is a NOUGAT or a MARSHMALLOW

Jinclaudio said:
you need indicate your build number, if is a NOUGAT or a MARSHMALLOW
Click to expand...
Click to collapse
That's why I said " rollback package or just ROM via dload "

ced43 said:
hi
during a firmware update i have a error message
since i can't start my p9lite
this phone stay at the huawei logo's
i have no access to the erecovery but i have access to fastboot rescue mode
ihave green phone locked and frp lock
i can't unlock my bootload with my code i have systematicaly failed info
do you have a solution for me?
ps i'm french so excuse me for my bad english
regard's
Click to expand...
Click to collapse
Salut,
Ton code pour déverrouiller le bootloader n'est pas bon?
Quelles manipulations as-tu faites et quel message d'erreur as-tu ?
J'imagine que tu es en VNS-L31C432Bxxx, mais quel "B" exactement?
La première chose serait de déverrouiller ton bootloader, ensuite flasher TWRP pour ta version (dépend de ta version B), ensuite flasher l'oeminfo pour ton tel (si tu as un C432 europe, je te donnerais un lien).
Pour finir tu le mettra en B160 FULL grâce au dload, puis tu feras les maj en OTA et ensuite tu pourras installer une custom rom.
------------------------------------------------------
Your unlock code is not good?
what have you done and what's error message you got?
What's your model variant (VNS...)
-unlock bootloader and flash TWRP for your variant (MM or N)
-flash the good oeminfo for you
-use dload methode to flash B160 full update
-update on last version with OTA update
-you able to install a custom rom

Je peux pas déverrouiller mon bootloader
Je suis en vns l31c900b160 de mémoire j'ai pas mon téléphone sous les yeux

Having the same problem.
Hello,
I'm Having the same problem. dload and rollback method not working. Keeps hanging at 5% then reboots, see the huawei logo and black screen. This all happened after installing Elite rom v6 https://forum.xda-developers.com/hu...elite-rom-v1-0-nougat-builds-cxxb3xx-t3625599
Hopefully someone knows a solution.
Greetz

hey board,
i have the same problem here... :crying:
i only can start fastboot&recovery mode... phone locked, FRP locked
dload will NOT work... the phone vibrates 2 times and hangs in the logo screen
my problem is, that i dont have a code, no SN, no IMEI etc.... (is there an option to get this info out of the fastboot screen?)
what i have done....
upload huawei image c432B130 (before: c900b130 - 10/2016) via dload
after reboots my phone hangs in a boot loop....
thx in advance!