HELP! error message after root. - Galaxy Note 3 Q&A, Help & Troubleshooting

hello everyone, i am not completely new to rooting i have rooted 3 devices before. i am using a galaxy note 3 sm-900W8 running android version 5.0 lollipop. the carrier is telus(CANADA). i rooted the phone using odin and then updated supersu and all the binaryies and installed gamekiller which all worked fine. then my phone randomly turned off and now when i turn it on it stays on boot screen for a little longer then normal and loads up with the error unfortunately system UI has stopped. my task bar at the top and home button no longer work now. is there anyway to fix this without a hard reset? i have tried wiping the cache partition multiple times. i also tried redoing the root to no avail. i also tried taking the battery out and rebooting. no luck.

Related

[Q] S4 rebooting after OTA

Hi!
Today I got a notification that there was an OTA ready. After installing the OTA my S4 keeps rebooting. It only works for 5-10 seconds and then it reboots. Not a complete reboot though, I don't have to type my pin again I just get the blue-purple ring and the samsung logo.
I've tried booting into recovery and did a factory reset but it still reboots:crying:
My S4 is the international version and it is completely stock and not rooted.
What do I do?
Thanks
EDIT: I started from scratch without importing apps and settings from google at it seems to have done the trick

Please help! System process not responding

Hello all. I've had a Verizon note 3 since release. I've been running HyperDrive 6 on 4.3 since I got the phone. I've had no reason to update at all, not to mention when I first got it I didn't understand knox so now my knox counter is 0x1. Its been great and themed and untouched for at least 3 months. Today I noticed everytime I opened an app it was upside down, and flipping my phone didn't help. So, I rebooted it.
Ever since that reboot about 3 hours ago I have been unable to get it to reboot fully. It boots up, gets to the lock screen and freezes for about 10 seconds then pops an error saying System process not responding "wait or close". I've done both options with no luck. I've booted into safestrap, cleared cache, recovered to my most recent (April) recovery, booted into stock rom slot, EVERYTHING ends in system process freezing and rebooting.
Why is it doing this out of nowhere? How do I make it stop? What is even wrong? I need this phone for work and in the 3 hours without it have already gotten crap via email for being unresponsive to phone calls.
I have zero idea how to update to KK with my knox counter voided. I'd prefer not to anyway since 4.3 HD6.0 worked great and was themed to my liking.
But I need this phone working, so I'm taking ideas.
Thanks for your help.
Have you tried using Odin if not might wanna start with that use a computer download the stock firmware tar file use Odin to flash the phone back to stock. That's what I would do I don't know what's wrong with you phone but that might help undo what was done.
burkechrs1 said:
Hello all. I've had a Verizon note 3 since release. I've been running HyperDrive 6 on 4.3 since I got the phone. I've had no reason to update at all, not to mention when I first got it I didn't understand knox so now my knox counter is 0x1. Its been great and themed and untouched for at least 3 months. Today I noticed everytime I opened an app it was upside down, and flipping my phone didn't help. So, I rebooted it.
Ever since that reboot about 3 hours ago I have been unable to get it to reboot fully. It boots up, gets to the lock screen and freezes for about 10 seconds then pops an error saying System process not responding "wait or close". I've done both options with no luck. I've booted into safestrap, cleared cache, recovered to my most recent (April) recovery, booted into stock rom slot, EVERYTHING ends in system process freezing and rebooting.
Why is it doing this out of nowhere? How do I make it stop? What is even wrong? I need this phone for work and in the 3 hours without it have already gotten crap via email for being unresponsive to phone calls.
I have zero idea how to update to KK with my knox counter voided. I'd prefer not to anyway since 4.3 HD6.0 worked great and was themed to my liking.
But I need this phone working, so I'm taking ideas.
Thanks for your help.
Click to expand...
Click to collapse
Sorry i got no idea what you can do, maybe oding back? But this is not the correct place to put a question... I am kind of sure you know that and if you didn't then read the forum rules.
Awesome ROM bro, I'll give it a try!!

Note 4 5.0.1- Wont Factory Reset After CF- Auto Root

Note 4 5.0.1 Not factory resetting after CF- Auto Root
Hello Everyone,
This is the first time I have ever posted anything on any forum online. I have used XDA to get help while fiddling with my devices before so I would just like to thank all of those who share things on forums.
I have a Note 4 SM-N910c running Lollipop 5.0.1. A few days ago I used CF Auto Root Method to root my device. Needless to say, it worked perfectly. However, today I wanted to factory data reset my device just to remove all the files that I have in my phone. I should mention that I am not trying to 'unroot' my phone. Just reset it.
So I went to the settings and factory data reset my phone but this is where the problem began. After clicking 'Erase All' my phone turned off but then a small android animated figure appeared with the words 'Installing System Update' visible beneath it and then suddenly a red faced down android appeared with the words 'error' beneath it. Then my phone went into the stock recovery where I rebooted my system and my phone turned back on without resetting it.
So my question is that, what in the world just happened and how can I reset my phone? I should also mention that I have no custom recovery installed and I have no custom rom intalled. Can anyone please guide me thru this, I would very much appreciate it.
Thank you for your help.

S4 (i9500) crashing and freezing at lock screen

hi guys i have an issue with my device (i9500) since i had a bad efs partition which i successfully restored from a backup.
The device works perfectly, but as soon as you lock it, and wait a few seconds, you can't unlock it anymore. Screen stays black, and the only way to get it started again is by removing the battery. Then it keeps on working perfectly, apps, games, everything is fine, as long as you don't lock it (by pressing powerbutton or auto lock)
Either then it crashes or restarts.
Things i've done already:
- Soft reset
- Hard reset + cache wiped
- tried many different roms
- fresh stock rom installed with Odin.
Problem still persists.
I've recently discovered that I don't have this problem on miui 7 running on 4.4 2. But as soon as I install flyme which is on 5.0.1 or any other lollipop rom or even stock lollipop then the phone either crashes while I'm using it or freezes at lockscreen and I can't unlock it. Please help guys cause I really wanna get back to my flyme rom on lollipop.

Help - G935A stuck on AT&T Logo - 3 vibrtations

For a week my G935A worked fine... direct out of the box I flashed ENG Kernel and Rooted, then installed apps and configured - no issues.
Today it was working then it hung on wake.. I tried to reboot and now it gets stuck at the AT&T logo and vibrates 3 times - over and over
I can get to Odin and Recovery screens easily so I tried to flash the ENG Kernel again & deleting Cache Partition few times - didnt fix it.
Also tried booting into Safe Mode - it never gets there, stays at AT&T logo.
When I go into the Recovery menu, I see at the bottom, in red... "dm-verity verification failed"
Anyone know how I can recover from this without Factory Reset? It took 6 hours to reinstall and config all my apps - really want to avoid that.
thx for the help!
as far as I know there is no way to fix and save your stuff. I had the same problem with G930A and even doing a factory reset would only allow my phone to boot but then I get apps crashing and then a reboot puts you back at ATT logo and the vibrates. Best to ditch the whole engboot and go back to stock until a more stable rooting method comes out.
Some searches shows posts that say using Odin to flash HOME_CSC without having to wipe and everything survive
... Where can I get HOME_CSC? I dl'd stock rom and dont see it in there.
thx!
Same here this morning on my 930A w/ PK1....went to watch a youtube vid and everything google related began crashing.
Only been on engboot for a couple days but did flash the v15 debloat last night. hmmmm.
Any luck with the files or procedure LivinOne?
Update: Flashed the PK1 CSC and got into recovery.
Wiped cache and reboot, same failure mode....sad face.
Flashed CSC again, into recovery, factory reset, wiped cache.
Back to setting my "new" device up.
Dec 30 update: Same crash, SEMI same problem.
I get the single vibration followed by the 3 vibrations after I put my pin in from a restart.
Same symptoms prior, all background activities began crashing.
Running all PK1 files from QRhinehardt post.
Any thoughts?
I ended up wiping and flashing the T-Mobile firmware and using the ENG bootloader (but not rooted yet). It is WAY faster than the AT&T was. I've only had issues with Wifi Calling (it doesnt seem to work most of the time)
s7 at&t
Hi, did you first flash with eng bootloader and then tmobile rom? I miss this step...I appreciate your help please
Single vibration followed by the 3 vibrations
Hi, were you able to fix the problem? I'm also getting the single vibration followed by the 3 vibrations.
Do you know why is this occurring? I performed a wipe cache and factory reset but still nothing.
bweegn said:
Same here this morning on my 930A w/ PK1....went to watch a youtube vid and everything google related began crashing.
Only been on engboot for a couple days but did flash the v15 debloat last night. hmmmm.
Any luck with the files or procedure LivinOne?
Update: Flashed the PK1 CSC and got into recovery.
Wiped cache and reboot, same failure mode....sad face.
Flashed CSC again, into recovery, factory reset, wiped cache.
Back to setting my "new" device up.
Dec 30 update: Same crash, SEMI same problem.
I get the single vibration followed by the 3 vibrations after I put my pin in from a restart.
Same symptoms prior, all background activities began crashing.
Running all PK1 files from QRhinehardt post.
Any thoughts?
Click to expand...
Click to collapse

Categories

Resources