Database Users

[Q] How to root Lenovo TAB A7-40 A3500-FL? [Solved] [GUIDE]

How to root Lenovo TAB A7-40 A3500-FL?
[Solved] See the guide below!
Device info:
Model number: Lenovo A3500-FL
Android version: 4.4.2
Kernel version: 3.4.67
Build number: A3500FL_A442_01_25_140823_SE
BB Chip: MT6582
MS Board. A3500FL
Bar code: this was my device's serial number
SW Ver.: ALPS.KK1.MP1.V2.10
Custom Build Verno.: 1408775889
Managed to get cwm and root with this guide: http://forum.xda-developers.com/and...vo-a3500-h-t2879208/post55491817#post55491817
Modified the guide for Lenovo A3500-FL!
EDIT: Also some users have reported that this guide doesn't do the trick or is out-dated, so copypasted the guide from this post here.
Guide
1. Download attachment cwmRecovery.zip and download latest Flash_tool (version 5.1352.0) can be downloaded from here)
1.1. Enable USB-debugging. (How to do this)
2. Manually install the drivers from the attachment a7_40_drivers.zip for the LenovoTablet before plugin it to computer (win7 dirvers work for win8 too).
2.1. To install unsigned/uncertified drivers on Windows 7: http://en.kioskea.net/faq/3914-windows-7-how-to-install-unsigned-drivers
2.2. To install unsigned/uncertified drivers on Windows 8: http://www.howtogeek.com/167723/how...8.1-so-that-you-can-install-unsigned-drivers/
2.3. After you have disabled the driver signature verification, you can install the drivers like this: Right click My computer, Manage, Device Manager, right click your computer at the top, Add Legacy hardware, next, Install plapla manually, next, Show all Devices, Have a Disk.., Browse to the driver folder where you unzip them, choose example windows7 and the 64 version (win7 drivers work for win8.x too), install every device. Then follow the guide.
(Note: Otherwise Windows only installs the normal automatic drivers and its more difficult to install the other drivers.)
2.4. Plug your device to PC.
3. Download the latest supersu zip file (version 2.46) from attachments or from https://download.chainfire.eu/696/SuperSU/
3.1. Move the zip.-file to the Sdcard.
4. Turn off your device.
5. Unpack cwmRecovery.zip
6. Run Flash_tool.exe with Admin Rights.
7. Chose Scatter-Loading and choose MT6582_Android_scatter.txt (in Recovery folder).
7.1. Now you will see checekd only one checkbox - recovery, if not click on it and choose recovery.img
7.2. Press Download.
7.3. Connect your device.
7.4. Wait few seconds.
8. Have CWM on your device .
9. Unplug your device.
10. . Boot to cmw recovery by turning off your device. Then press and hold VOL DOWN + VOL UP and then also press and hold POWER for about 7 seconds.
10.1. Choose " Install zip from sdcard." (To confrim always use the Power Button)
10.2. Choose "zip from sdcard".
10.3. Select SuperSU-v2.46.zip from sdcard and apply.
10.4. Have a rooted tablet.
It might be necessary to always flash the CWM with the Flashtool directly before you startup the device. Otherwise it will start the original AndroidRecovery again.
It might also be necessary to use different drivers from here.
If the supersu zip doesn't install, try toggling the signature verification to disabled from cwm->install zip from sdcard->toggle signature verification.
Tested and working on Levono A7-40 3500-FL with kitkat update, build number A3500FL_A442_01_25_140823_SE, from ota. Attached screenshot for proof. Also other people have reported that this works for later updates too, for example A3500FL_A442_01_27_141127_SE.
You can update to the latest OTA firmware by first going back to stock recovery. See the second post for the guide.
Thanks and credits go to: @Koli96 and @bobais

How to go back to stock rom/recovery and update to latest Lenovo OTA firmware update
So, it's pretty simple, you take the stock_recovery.zip from the first post, extract it, and replace recovery.img in the recovery folder with the stock one.
Then :
Quote:
4. Turn off your device.
6. Run Flash_tool.exe with Admin Rights
7. Chose Scatter-Loading and choose MT6582_Android_scatter.txt (in Recovery folder)
7.1. Now you will see checekd only one checkbox - recovery, if not click on it and choose recovery.img
7.2.. Press Download
7.3. Connect your device
7.4. Wait few seconds.
And that's it !
On a side note, if it seems stuck on a black screen with a loading circle after factory reset, you have to put the tablet in landscape mode and restart (the shutdown menu appears without any problem) - this issue doesn't seem related to recovery, but a bug within lenovo firmware and the first configuration screen.
Side note 2: The first boot after flashing new update might take 15mins.
Side note 3: After updating to the latest OTA you can go back to cwm recovery with the guide from the first post.
Credits @tenuis

I got the same tablet and I also am looking for a root. :/

Another waiting for rooting lenovo owner.
Same here, i was looking for a root guide and i couldn't find anything.
Does anyone else has a problem with long charging times?

Well it charges long and the charge stays long, so no issue here.
Seems that not that many lenovos root easily, but of course this is a pretty new device(?).

leripe said:
Well it charges long and the charge stays long, so no issue here.
Seems that not that many lenovos root easily, but of course this is a pretty new device(?).
Click to expand...
Click to collapse
OK let's try this
Install mtk drivers
Install USB and adb drivers
Install v root 1.7.8
Now tick adb debugging and connect your device to PC run v root and click root button after device get connected to v root
Let me know if you have any issues
All the best ?
Sent from my x604 using Tapatalk

The-Immortal said:
OK let's try this
Install mtk drivers
Install USB and adb drivers
Install v root 1.7.8
Now tick adb debugging and connect your device to PC run v root and click root button after device get connected to v root
Let me know if you have any issues
All the best ?
Sent from my x604 using Tapatalk
Click to expand...
Click to collapse
Can you link all the drivers?
Edit: Vroot link here: http://vrootdownload.info/vroot1.7.8/

leripe said:
Can you link all the drivers?
Edit: Vroot link here: http://vrootdownload.info/vroot1.7.8/
Click to expand...
Click to collapse
If you have win7 or win8/8.1 USB drivers will automatically installed when you connect device
Adb driver I hope this will work
http://adbdriver.com/downloads/
If it fails make a google search am sure you will find it
Sent from my x604 using Tapatalk

The-Immortal said:
If you have win7 or win8/8.1 USB drivers will automatically installed when you connect device
Adb driver I hope this will work
http://adbdriver.com/downloads/
If it fails make a google search am sure you will find it
Sent from my x604 using Tapatalk
Click to expand...
Click to collapse
Installed everything and tried vroot once again (I have tried it before).
Still not rooted. And btw that vroot at least tries to install bunch of bloatware crap on the pc.
Edit:
I would suggest for anyone who installed Vroot to your pc to scan the whole pc after you uninstall the vroot.
Here are the scanning tools:
Malwarebytes
adwcleaner
superantispyware
hitmanpro

leripe said:
Installed everything and tried vroot once again (I have tried it before).
Still not rooted. And btw that vroot at least tries to install bunch of bloatware crap on the pc.
Edit:
I would suggest for anyone who installed Vroot to your pc to scan the whole pc after you uninstall the vroot.
Here are the scanning tools:
Malwarebytes
adwcleaner
superantispyware
hitmanpro
Click to expand...
Click to collapse
I got a successful root by flashing Recovery.rar from lenovo-forums.ru, (it's easy to google, I'm not allowed to post links) with the included SPFlash Tool and afterwards flashing the needed SU binaryies and apk. However, this will mess up the OTA updates, and I can't find the stock recovery again.
Therefore, I really beg anyone having the stock recovery to post it, enabling us to switch between them, whenever we want to apply any OTAs.
Thanks a lot!

nkr said:
I got a successful root by flashing Recovery.rar from lenovo-forums.ru, (it's easy to google, I'm not allowed to post links) with the included SPFlash Tool and afterwards flashing the needed SU binaryies and apk. However, this will mess up the OTA updates, and I can't find the stock recovery again.
Therefore, I really beg anyone having the stock recovery to post it, enabling us to switch between them, whenever we want to apply any OTAs.
Thanks a lot!
Click to expand...
Click to collapse
Well I very highly doubt that there will be any more updates for a device with this price range. And since the next android version is the L version, which requires more work than before.
Edit2: http://forum.xda-developers.com/android/development/guide-lenovo-a3500-h-t2879208 found this. Tested and it works. Will edit it to the first post.

The same as me
i cant flash update.zip from cwm recovery and need to restore the stock recovery ...
I think flashing the stock rom can solve the problem..
.by using the sp flash tool we can select to flash recovery only ....unticking the others except recovery.img ....you just try to download the stock rom and flash the recovery

Same problem
Heya guys!
I have the same problem here.. I can't run the .zip file from the SD card, it get interrupted every time. Any ideas?
drabuaiad said:
The same as me
i cant flash update.zip from cwm recovery and need to restore the stock recovery ...
I think flashing the stock rom can solve the problem..
.by using the sp flash tool we can select to flash recovery only ....unticking the others except recovery.img ....you just try to download the stock rom and flash the recovery
Click to expand...
Click to collapse

I dont know what you two are trying to do but this thread is about rooting the lenovo A3500-FL not about lenovo stock rom.

Rooting..
Yes indeed, that's what I'm trying to do. Rooting the A3500-FL. According to the instructions you need to install the SuperSU from a zip on your SD card. When I try do that it gets interrupted every time. Installing recovery went well. So I'm not getting what I do wrong? Any ideas?
leripe said:
I dont know what you two are trying to do but this thread is about rooting the lenovo A3500-FL not about lenovo stock rom.
Click to expand...
Click to collapse

Mrosenho said:
Yes indeed, that's what I'm trying to do. Rooting the A3500-FL. According to the instructions you need to install the SuperSU from a zip on your SD card. When I try do that it gets interrupted every time. Installing recovery went well. So I'm not getting what I do wrong? Any ideas?
Click to expand...
Click to collapse
http://download.chainfire.eu/452/SuperSU/UPDATE-SuperSU-v2.02.zip and y ou mean this when you talk about update.zip?
And I hope you are using the install zip from sdcard option and the choose zip from sdcard option?
Boot to cmw.
Install zip from sdcard.
Choose zip from sdcard.
browse to your supersu zip and apply.
Now I also update the first post's guide, so you can check that out too.

Thanks for the help so far. But now I'm starting to doubt that the CWM install went successfully. Let me show you a picture of my screen after a failed install of the UPDATE-SuperSU-v2.02.zip -file. (ht_tps://ww_w.dropb_ox.com/s/1wrnatzjk2gn42h/2014-10-09%2008.50.40.png?dl=0) (slightly modified link because of forum rules, just take out the _) I'm using the "apply update from sdcard" option, then I browse to the SuperSU.zip -file and apply it. Then it starts installation, but aborts it in a few seconds. So am I booting to just a normal recovery mode and not CWM? (Sorry if all this seems totally ignorant, I have only flashed roms before, never rooted a new device)
leripe said:
UPDATE-SuperSU-v2.02.zip and you mean this when you talk about update.zip?
And I hope you are using the install zip from sdcard option and the choose zip from sdcard option?
Boot to cmw.
Install zip from sdcard.
Choose zip from sdcard.
browse to your supersu zip and apply.
Now I also update the first post's guide, so you can check that out too.
Click to expand...
Click to collapse

Yup.. This is the problem. The recovery runs fine from Flash Tool and claims it installs it. (Download ok) But I still don't seem to have CWM on the device. It's just normal recovery mode. So any ideas about the CWM-installation? What could possibly go wrong? I get no error messages. Cheers.
//Mike
Mrosenho said:
Thanks for the help so far. But now I'm starting to doubt that the CWM install went successfully. Let me show you a picture of my screen after a failed install of the UPDATE-SuperSU-v2.02.zip -file. (ht_tps://ww_w.dropb_ox.com/s/1wrnatzjk2gn42h/2014-10-09%2008.50.40.png?dl=0) (slightly modified link because of forum rules, just take out the _) I'm using the "apply update from sdcard" option, then I browse to the SuperSU.zip -file and apply it. Then it starts installation, but aborts it in a few seconds. So am I booting to just a normal recovery mode and not CWM? (Sorry if all this seems totally ignorant, I have only flashed roms before, never rooted a new device)
Click to expand...
Click to collapse

thanks ...
It is work fine for me on a3500 fl with 4.4.2 ver a442_01_26_140911_se

Mrosenho said:
Yup.. This is the problem. The recovery runs fine from Flash Tool and claims it installs it. (Download ok) But I still don't seem to have CWM on the device. It's just normal recovery mode. So any ideas about the CWM-installation? What could possibly go wrong? I get no error messages. Cheers.
//Mike
Click to expand...
Click to collapse
Same for me, what about this @leripe ?
EDIT// Oh, It's working now, tried to flash it one more time, then I held a power button until Lenovo logo appeared and then I pressed Vol UP and Vol DOWN and the CWM came in, thank you! Now my tablet is finally rooted

OXYGEN OS(Download link ,installation guide & Issues)

Download OxygenOS http://oxygenos.oneplus.net/oxygenos_1.0.0.zip
DO UNZIP your ZIP before flashing!!! installation ZIP is in ZIP file provided
Plain Aosp Rom
Download Feedback App https://s3.amazonaws.com/oxygenos.oneplus.net/Feedback_v1.0.2.apk
Note: You’ll need to enable installations from unknown sources (settings > security) in order to install the feedback app on OxygenOS.
Please make sure all your data and files are backed up before commencing. Flashing OxygenOS onto CM does require a system wipe, so you will lose all of your data. We are actively working on an easier, more automated solution soon to be available, but for now the build must be flashed manually.
Please proceed only if you are confident in your abilities to flash a custom ROM. This guide exists to help you flash OxygenOS, but things can still go wrong if not followed correctly. While rooting and flashing will not void your OnePlus warranty, any damage caused by improper flashing is not covered under warranty.
The following instructions assume you have Fastboot and ADB installed.
Step 1
You first need to flash a recovery onto your device. We recommend using TWRP. Please download the recovery image to your computer. You can follow their instructions to flash recovery, or you can reference these steps:
Boot into fastboot mode. You can do this on your OnePlus One by holding down the power button and the volume up button. When you see the fastboot logo, connect your device to your computer.
In your terminal window, find the folder where you put the recovery image and run the following commands:
fastboot oem unlock (You can skip this step if your phone’s bootloader is already unlocked).
fastboot flash recovery <recovery.img>. Image file should be the TWRP recovery image.
fastboot reboot
You should now have the recovery installed.
Step 2
Copy oxygenos_1.0.0.flashable.zip to your phone. On a Mac, you can use Android File Transfer.
Step 3
Boot into recovery. You can do this on your OnePlus One by holding down both the volume down key and the power button.
Step 4
Once you are in the recovery interface, the first thing you want to do is a factory reset. Again, you will lose all your data so please make sure you have backed up everything before doing this.
Step 5
After the wipe, go to install and find oxygenos_1.0.0.flashable.zip. Confirm flash. This will flash OxygenOS onto your device.
Step 6
After the flash succeeds, you can reboot the device, which will take you to the new OxygenOS. Enjoy!
List of known issues:
When printing images, printer service may stop
Cannot hang up a call using headphone controls (intermittent)
OTG can only recognize FAT32 file system
During system update, display of wifi/data notification may be incorrect
During system update, display of version number may be incorrect
Files sometimes crash when uploading files to the cloud
Files may crash when renaming image files
Files does not support multi-select deletes

manishsharma17 said:
Download OxygenOS http://oxygenos.oneplus.net/oxygenos_1.0.0.zip
Download Feedback App https://s3.amazonaws.com/oxygenos.oneplus.net/Feedback_v1.0.2.apk
Note: You’ll need to enable installations from unknown sources (settings > security) in order to install the feedback app on OxygenOS.
Please make sure all your data and files are backed up before commencing. Flashing OxygenOS onto CM does require a system wipe, so you will lose all of your data. We are actively working on an easier, more automated solution soon to be available, but for now the build must be flashed manually.
Please proceed only if you are confident in your abilities to flash a custom ROM. This guide exists to help you flash OxygenOS, but things can still go wrong if not followed correctly. While rooting and flashing will not void your OnePlus warranty, any damage caused by improper flashing is not covered under warranty.
The following instructions assume you have Fastboot and ADB installed.
Step 1
You first need to flash a recovery onto your device. We recommend using TWRP. Please download the recovery image to your computer. You can follow their instructions to flash recovery, or you can reference these steps:
Boot into fastboot mode. You can do this on your OnePlus One by holding down the power button and the volume up button. When you see the fastboot logo, connect your device to your computer.
In your terminal window, find the folder where you put the recovery image and run the following commands:
fastboot oem unlock (You can skip this step if your phone’s bootloader is already unlocked).
fastboot flash recovery <recovery.img>. Image file should be the TWRP recovery image.
fastboot reboot
You should now have the recovery installed.
Step 2
Copy oxygenos_1.0.0.flashable.zip to your phone. On a Mac, you can use Android File Transfer.
Step 3
Boot into recovery. You can do this on your OnePlus One by holding down both the volume down key and the power button.
Step 4
Once you are in the recovery interface, the first thing you want to do is a factory reset. Again, you will lose all your data so please make sure you have backed up everything before doing this.
Step 5
After the wipe, go to install and find oxygenos_1.0.0.flashable.zip. Confirm flash. This will flash OxygenOS onto your device.
Step 6
After the flash succeeds, you can reboot the device, which will take you to the new OxygenOS. Enjoy!
List of known issues:
When printing images, printer service may stop
Cannot hang up a call using headphone controls (intermittent)
OTG can only recognize FAT32 file system
During system update, display of wifi/data notification may be incorrect
During system update, display of version number may be incorrect
Files sometimes crash when uploading files to the cloud
Files may crash when renaming image files
Files does not support multi-select deletes
Click to expand...
Click to collapse
OMG!!! Is this a Dream???? Is this real?

CM version?

manish.kumar86 said:
CM version?
Click to expand...
Click to collapse
its not based on Cm its based on AOSP its 5.0.2

Yash Kanchhal said:
So when we are factory resetting the phone in recovery is it the same thing like wiping the other thing (cache, dalvik cache etc). I'm new in this so I'm not able to understand that please help me in this & when is the CM12S coming anyone knows?????
Sent from my A0001
Click to expand...
Click to collapse
TWRP has an option for factory reset ...

There's already a thread for this here:
http://forum.xda-developers.com/showthread.php?t=3072259
Transmitted via Bacon

Yash Kanchhal said:
Ohk thnx mate it means wiping is every thing????? Right ????
Sent from my A0001
Click to expand...
Click to collapse
yes sir ..use the option of factory reset in twrp and you should be good

timmaaa said:
There's already a thread for this here:
http://forum.xda-developers.com/showthread.php?t=3072259
Transmitted via Bacon
Click to expand...
Click to collapse
When i created the thread the thread was not there in present form

manishsharma17 said:
When i created the thread the thread was not there in present form
Click to expand...
Click to collapse
Unfortunately it looks like he created his first.
Transmitted via Bacon

Nice spam indeed. Three threads, three posts, three times begging for thanks. Bah.

Can you add my guide thread to the OP please?
http://forum.xda-developers.com/oneplus-one/general/guide-how-to-install-oxygenos-t3072500

Word of caution! I backuped on the internal sd. Had all my backups of os's and app data completely wiped. Never checked the wipe internal sd box. Use and external backup.

Is anyone with SuperSU 2.46 having issues with WIFI not turning on and also having screen artifacts that force to do a hard reboot?

cyberon said:
Is anyone with SuperSU 2.46 having issues with WIFI not turning on and also having screen artifacts that force to do a hard reboot?
Click to expand...
Click to collapse
Getting neither of those. Main problem I'm having is major Google Play Services drain. It's the same bug we had on CM12 nightlies some time ago and my phone is permanently awake
Sent from my A0001 using Tapatalk

Hello, due to having a similar topic here http://forum.xda-developers.com/oneplus-one/general/oxygen-os-released-download-t3072259, I will have to close this thread.
Please continue the discussion in the one linked.
Regards

[ GUIDE ] [ Marshmallow Firmware Upgrade ROM install including ViperOneM9 4.x.x ]

Dummy friendly guide how to upgrade, flash and install the latest Marshmallow Firmware and the latest ROM’s such as the ViperOne ROM 4.x.x, this guide is intended for those who are already slightly familiar with the flashing process and have previously managed to flash a ROM on their HTC One M9 device…
CHECKLIST BEFORE STARTING:
1) Phone is S-OFF
2) Unlocked Bootloader
3) Rooted
4) Latest TWRP recovery
5) SUPER CID changed to 11111111
6) External SD Card
7) NANDROID Backup and any or every other form of backup
8) Device drivers, Android SDK Platform Tools including ADB & FASTBOOT.
9) USB Debugging enabled.
10) BACK UP OF ALL YOUR DATA !!!
Before we begin make sure you back up all your data on both the internal and external SD card.
For the purpose of this tutorial we will be installing the latest ViperOneM9 ROM…
a) Downloaded and place the latest ViperOne ROM - ViperOneM9_4.x.x.zip on your External SD card,
Main Thread by j to the 4n is found here:
http://forum.xda-developers.com/one-m9/development/rom-viperonem9-1-0-0-tweaks-hub-t3072773
Latest ViperOne ROM for download is here:
http://venomroms.com/htc-one-m9/
b) If you are currently on ViperOneM9 3.5.0 or older and wish to upgrade to the latest 4.x.x than the latest Marshmallow firmware is required (3.35.401.12 or 3.35.617.12 firmware)… This can be found here and within Sneakyghost original thread.
https://docs.google.com/spreadsheets/d/1ZaiJ3F_f76sVa4daU5H62OYi5Bj23LEBBv4xDTQ8y-M/pubhtml
http://forum.xda-developers.com/one-m9/development/firmware-t3068243
Now download the latest version of either:
NO WIPE ZIP
or
FULL STOCK WIPE ZIP
For this tutorial we will use the FULL STOCK WIPE ZIP (to archive a clean install – this will wipe everything on your phone excluding the External SD card)
c) Place the downloaded M9_3.35.401.12_FullStock_wipe.zip into your Android SDK Platform Tools Folder (for example C:\Android\ if this is where all your tools are found)
d) Download the latest version of TWRP recovery from
http://www.teamw.in/devices/htconem9.html
Place the downloaded twrp-2.8.7.0-hima.img in your Android SDK Platform Tools Folder
e) Once you are 101% ready to begin the process start by connecting your device and launching the command window (hold shift, right click in window with all the required ADB/FASTBOOT aps and select "open command window here) once the black terminal window appears start by typing in
adb devices
if your phone appears in the list we can continue by typing:
adb reboot download
wait a few seconds for the screen to appear and type:
fastboot oem rebootRUU
your phone should now be in the RUU mode with a silver HTC logo, now type
(if you renamed the original file type its current name, by default it is as follows)
fastboot flash zip M9_3.35.401.12_FullStock_wipe.zip
f) you will most likely receive something like this towards the end after running the above command...
FAIL90 hboot pre-update! please flush image again immediate
FAILED (remote: FAIL90 hboot pre-update! please flush image again immediate)
For "hboot-preupdate" response, restart the same procedure for device...
just type the above command again and phone will flash the update again and hopefully it will take at least a minute or more to complete, hopefully there will be no more errors, just in case repeat the above command... Just in case you do see errors try looking them on Sneakyghost's thread found here
g) Once this is done and everything passed than we have successfully upgraded our firmware to Marshmallow... Since we selected the FULL STOCK WIPE option we need to flash TWRP once again (as it was wiped) and don't bother resetting or hoping for the phone to boot normally as it won’t...
(if you renamed the original file type its current name, by default it is as follows)
Type:
fastboot flash recovery twrp-2.8.7.0-hima.img
and once it’s done
adb reboot-bootloader
*if for any reason you need to reset your phone and gain access to the bootloader menu, download mode, recovery etc. you can always do this manually by holding vol up, vol down and power buttons at the same time for a few seconds to reset the device, to get into the bootloader, recovery, download mode etc. After the phone resets continue holding the vol down and power button until you reach the bootloader menu.
*if you type adb devices and you see multiple devices or emulators that prevent the commands from working I suggest running the following:
adb kill-server
adb devices
Now only your connected device should appear…
h) It is now time to enter our recently flashed recovery to finally install our latest ROM.
Enter the recovery manually or by typing
adb reboot recovery
From there you may select the wipe option (swipe to factory Reset) and proceed to the Install section, browse for your ROM file and select it.
i) Within Aroma installer select all your preferred options and begin to install, once the flashing completes your device should reboot and now you keep your fingers crossed and wait (will take several minutes so just be patient…. And DONE!!! You now have the latest Marshmallow firmware and ViperOneM9 ROM installed.
#Please note that I’m no expert when it comes to these matters, this guide is here to help anyone who is unsure what to do, I tried to write it up the best way possible (sorry that there are no fancy pictures) if there any errors or issues with my methods please feel free to correct them but so far they worked for me and hopefully will also work for you. (This guide will also help you flash other ROM's) If you need more help please feel free to ask, there is always someone here on xda who knows the answers 

Excellent write up !!
Many thanks !!!....g

glad i could help

GODSPD said:
glad i could help
Click to expand...
Click to collapse
Very nice writeup. Just got an M9 for the wife. I've been around the block so I get everything, but I've been away from HTC since the One X...well, there's the N9 but it's a nexus. What are the RUU mode and Download mode. If I remember correctly there was only the bootloader to go to on the One X. If it's complicated is there somewhere I can read about the modes?

Can you write instructions for s-on and unlocked boatloader? Thanks.
Sent from my HTC One M9 using Tapatalk

Excellent write-up! For extra-completeness, could you please cover changing the mid in android-info and dealing with error 22 (stuff about headers). I'm still fighting that one...
Thanks for your time.

CrazyRom said:
Excellent write-up! For extra-completeness, could you please cover changing the mid in android-info and dealing with error 22 (stuff about headers). I'm still fighting that one...
Thanks for your time.
Click to expand...
Click to collapse
PM sent, hope it helps.

zrzhu said:
Can you write instructions for s-on and unlocked boatloader? Thanks.
Sent from my HTC One M9 using Tapatalk
Click to expand...
Click to collapse
Have you received the official Marshmallow OTA yet on your device? the S-OFF method is available for those who don't want to wait for official updates, I will gladly write up a S-ON method once more people receive the official update...

GODSPD said:
PM sent, hope it helps.
Click to expand...
Click to collapse
Also try the following as error 22 was not covered in the error handling section...
http://forum.xda-developers.com/showpost.php?p=59783531&postcount=3
Download 7zip, open the zip inside of the program, right click on the Android text file and open within. Change the mid to yours hit save. It will ask if you want to update the zip, hit yes. Then try and flash.
SneakyGhosts post explains this:
Error 22 is new to me too but the string is kind of self explanatory: every archive has a header where the archive-program finds info about what type of archive and what compression. If the error says anything about this header, the logical conclusion is either a corrupted, broken archive or an unsupported archive type.
I suspect the latter simply due to the fact that the zip was unpacked and repacked, which then easily creates an incompatible zip.

GODSPD said:
Have you received the official Marshmallow OTA yet on your device? the S-OFF method is available for those who don't want to wait for official updates, I will gladly write up a S-ON method once more people receive the official update...
Click to expand...
Click to collapse
No, I've att m9. I'm still I viperone 3.5. Why do we need to wait for the official update?
Sent from my HTC One M9 using Tapatalk

zrzhu said:
No, I've att m9. I'm still I viperone 3.5. Why do we need to wait for the official update?
Sent from my HTC One M9 using Tapatalk
Click to expand...
Click to collapse
because you need the latest firmware in order to install 4.x.x and the only way to get the latest firmware is via the OTA or by flashing it with the s-off method.

GODSPD said:
because you need the latest firmware in order to install 4.x.x and the only way to get the latest firmware is via the OTA or by flashing it with the s-off method.
Click to expand...
Click to collapse
Thanks. Hopefully ATT will release Marshmallow soon then.

Hi guys i dont have anymore pc. Can i flash new firmware without pc? Plz help

Can you put here your all c:\android folder in .zip file? Of course you can't put here all venom rom zip, but only all your files in that folder

BLEK0TA said:
Can you put here your all c:\android folder in .zip file? Of course you can't put here all venom rom zip, but only all your files in that folder
Click to expand...
Click to collapse
which exact files are you after, the android sdk?

thanks bro!! nice collection!

zrzhu said:
Thanks. Hopefully ATT will release Marshmallow soon then.
Click to expand...
Click to collapse
I'm still kind of "fuzzy" on this whole firmware thing.... IF I don't want to wait (on ATT) and IF I go S-OFF, which firmware can I/should I use for Marshmallow?

Delete

HI, can you please tel me how long does the firmware flash take as mine has been at it for over 2 hours? Not sure if it is stuck?

I am on sprint. How do i get the new firmware? It isnt on the list. Thank you

[RECOVERY] [TWRP 3.0.0-0] for Vodafone Smart Prime 6

Hello guys.
I have successfully ported TWRP 3.0.0-0 for our Smart Prime 6.
It's 100% working !!
There are NO BUGS !! :good:
DOWNLOAD
NEW LINK: DOWNLOAD
________________________________________
How to install​​
Via app:
1) Download TWRP 3.0.0-0 from the link above and place it on internal storage of your phone.
2) Download Flashify app from Google Play Store.
3) Open Flashify app.
4) Grant root permissions.
5) Click "Recovery image" and then click "Choose a file"
6) Navigate to the folder where you placed TWRP 3.0.0-0 and choose the .IMG file.
7) Press "Yup!" button and wait.
8) After a while the phone will require reboot. So click "reboot" button.
9) Phone will reboot and automatically boot into TWRP, so you can press reboot to system.
10) Enjoy!
Special thanks to Oneb1t for modded .fstab file! :highfive:
edit: you can use Flashfire app too instead of Flashify, but it's not recommended, because the latest version of the Flashfire app is not flashing properly.

Brilliant! Thank you so much! Do you know any custom ROM what is better than the factory ROM?

There is no custom ROM for this phone yet.
But I'm trying to make LITE ROM.

Adreno306™ said:
There is no custom ROM for this phone yet.
But I'm trying to make LITE ROM.
Click to expand...
Click to collapse
Do you think it's easier/possible to adapt a ROM from a similar device like say, the Alcatel
Pop 2 (5) Premium ? I don't know if there's any ROM for that phone tho, but since it's branded as Alcatel you might get more support from the community here than by using Vodafone's name.

Hello, Demonlord6.
I have tried to make a stock flashable ROM via dumping the system folder and the boot.img file, but without success.
It does not boot properly.. when I tried to flash it without dalvik/system wipe everything was as before.
When I tried to wipe /system and dalvik first and then flash the ROM, it causes bootloop.
So now I'm trying to fix this issue..
I don't know where the problem is.
So when this issue will be solved I will try to build a ROM from Alcatel phones with same specs.

Adreno306™ said:
Hello, Demonlord6.
I have tried to make a stock flashable ROM via dumping the system folder and the boot.img file, but without success.
It does not boot properly.. when I tried to flash it without dalvik/system wipe everything was as before.
When I tried to wipe /system and dalvik first and then flash the ROM, it causes bootloop.
So now I'm trying to fix this issue..
I don't know where the problem is.
So when this issue will be solved I will try to build a ROM from Alcatel phones with same specs.
Click to expand...
Click to collapse
Hey, Andreno306
I don't know much about Rom's in that level of expertise I'm afraid :/ but I did some digging and came across this simple tutorial on XDA:
http://forum.xda-developers.com/showthread.php?t=2387941
I imagine it does not work for every single device out there, at least not with modifying stuff after, but it might be a good starting point I think, in fact I would try to actually make one myself had I a working PC currently at home. But even if I did I had no way of testing it because this is currently my daily driver phone.

Just wanted to say that I'm also very interested in getting a slim ROM for this device. I can't offer any expertise I'm afraid! Just wanted to show that there are people interested in your project.
:highfive:

Stock Kernel
Thanks, it works great.
This is little off-topic but does anyone has the stock kernel, i flashed NeoKernel but it is not that good and i forgot to make a backup do can anyone please link me to the stock kernel?

vojta_horanek said:
Thanks, it works great.
This is little off-topic but does anyone has the stock kernel, i flashed NeoKernel but it is not that good and i forgot to make a backup do can anyone please link me to the stock kernel?
Click to expand...
Click to collapse
I have one
https://mega.nz/#!tMJD3B4T!f6m2ELYCVupqGCcN2aGbkrNzEqijLu7au-7usEfeVL0
But I recommend to restore it with the flashify app, because that's how the backup was made.
If, for some reason, you don't/can't restore it, then you can always try Sugar on the PC which basically restores everything to factory settings (recovery, kernel, etc, it all gets reset)

Demonlord6 said:
I have one
But I recommend to restore it with the flashify app, because that's how the backup was made.
If, for some reason, you don't/can't restore it, then you can always try Sugar on the PC which basically restores everything to factory settings (recovery, kernel, etc, it all gets reset)
Click to expand...
Click to collapse
Restored and my phone keeps turning off after boot(once i saw the turn off screen, other times it just vibrates at boot screen), isnt it the wrong file? (flashed wia flashify)
I was able to restore the boot from TWRP (lucky i made a backup this time)

vojta_horanek said:
Restored and my phone keeps turning off after boot(once i saw the turn off screen, other times it just vibrates at boot screen), isnt it the wrong file? (flashed wia flashify)
I was able to restore the boot from TWRP (lucky i made a backup this time)
Click to expand...
Click to collapse
Sorry there about the bootloop but glad u could restore it from TWRP, maybe it was because we have different ROM versions ?

Demonlord6 said:
Sorry there about the bootloop but glad u could restore it from TWRP, maybe it was because we have different ROM versions ?
Click to expand...
Click to collapse
I got this one: http://www.needrom.com/download/vodafone-smart-prime-6-vf-895n-debloatedclean-stock/#

vojta_horanek said:
I got this one: http://www.needrom.com/download/vodafone-smart-prime-6-vf-895n-debloatedclean-stock/#
Click to expand...
Click to collapse
Yeap, that's not the same version as my ROM, mine is not 130FNN etc. Maybe that's why it didn't work
Enviado do meu GT-S5280 através de Tapatalk

Sorry for the stupid question but... does it works on Smart Prime 7 too?

Has anyone installed that linked ROM? It seems to be what we are looking for... a slim debloated rom.
I presume we need to be rooted, install this TWRP, then flash that ROM?
It mentions unlocking the bootloader, I dont think I've seen any info anywhere about unlocking the bootloader.
Can anyone give a quick lowdown on all the steps required to install that ROM please?

Hi everyone, I discovered that Elephone Trunk and Smart Prime 6 have (almost) identical specs: https://www.devicespecifications.com...ison/c584481c6
So it would be great to "port" (or build ?) the official Nougat-OmniROM for Trunk to VF-895N: http://dl.omnirom.org/trunk/
Last but not least, here's official Vodafone Smart Prime 6 sources: Vodafone_Smart_prime_6_20150413.tar.xz

TWRP for vodafone smart max 4 990N (coolpad 8890u).
I tried this recovery image for vodafone smart max 4 990N (coolpad 8890u).
The phone is in a bootloop state. I think i have usb debugging enabled already.
So, in fastboot mode i can see the device in my pc in adb fastboot cmd.
Im trying to ''fastboot boot recovery.img" but it stops in ''booting..''.
Dont know whats the problem but for sure i can not find a specific twrp image for this device.
If i enter fastboot oem device-info it says ''(bootloader) Device unlocked: true''.
Any ideas ?

hi i was wondering if you could share how you did this or if you can make one for the Vodafone smart n9 (VFD720) it would help a lot of people out looking for this

Needed to root a Vodafone Smart Prime 6 (VF 895N) (got it from a friend because it became unresponsive from all the updated google play stuff ) to get linux-deploy running. Just wanted to leave a big thank you here for Adreno306 for his TRWP 3.0.0-0. it did the job very well!
Only the procedure to get it installed differed quite a bit for me, since Flashify is no longer available.
I wanted to preserve boot and just flash trwp to recover, what worked quite well.
The first thing I did was to boot the phone manually in recovery mode (Power+Vol up) and reset it to factory settings from there. It takes a little while. Then follow the setup, go to phone settings, enable developer mode and set usb debugging. If "unlock oem" is not available there, reboot into recovery again, set unlock there and reboot into bootloader.
The prerequisites are adb and fastboot, both must work. Means adb devices and fastboot devices must show the phone. What can make problems under win10 as it sometimes does not detect the phone in bootloader mode. An actual google usb driver is needed, as provided by google.
For me adb worked well, but when rebooted into bootloader with adb reboot bootloader, fastboot didnt detect the phone. With the phone still connected, the windows device manager showed an unknown device with and exclamation mark (!). Right click, install driver, select driver manually, select driver from device list, mark all devices (first entry) and click "disk", then point to the usb driver director and select "ADB fastboot driver". ( A more comprehensive description is available here )
Once adb and fastboot detect the device, it is time to prepare it. Boot to system (normal operation) first. Make sure that the TRWP 3.0.0-0.img is renamed to trwp.img and then
adb reboot bootloader
fastboot devices
fastboot oem unlock
fastboot boot trwp.img
Now the phone should show the trwp menu, set it up to root the phone and install SuperSU. Reboot into bootloader and
fastboot flash recovery trwp.img
fastboot reboot
Verify with adb reboot recovery, you should see trwp now. Reboot to system.
Now finally go into the app selector, start SuperSU, and root the phone. SuperSu uses trwp recovery mode to install its image and root is done.
Again, big thanks for providing the TRWP image!

Adreno306™ said:
Hello guys.
I have successfully ported TWRP 3.0.0-0 for our Smart Prime 6.
It's 100% working !!
There are NO BUGS !! :good:
DOWNLOAD
NEW LINK: DOWNLOAD
________________________________________
​How to install​
​
Via app:
1) Download TWRP 3.0.0-0 from the link above and place it on internal storage of your phone.
2) Download Flashify app from Google Play Store.
3) Open Flashify app.
4) Grant root permissions.
5) Click "Recovery image" and then click "Choose a file"
6) Navigate to the folder where you placed TWRP 3.0.0-0 and choose the .IMG file.
7) Press "Yup!" button and wait.
8) After a while the phone will require reboot. So click "reboot" button.
9) Phone will reboot and automatically boot into TWRP, so you can press reboot to system.
10) Enjoy!
Special thanks to Oneb1t for modded .fstab file! :highfive:
edit: you can use Flashfire app too instead of Flashify, but it's not recommended, because the latest version of the Flashfire app is not flashing properly.
Click to expand...
Click to collapse
Hi, I would like to try your tutorial but I can't root this phone (which is an important step in the tutorial), is there any way someone could help me??
Thanks

[ROOT][TB-X505X] Rooting Lenovo Tab M10 TB-X505X

This guide is now obsolete. Please check my new guide. It has a custom recovery for this device as well as a rooting guide. Refer to this guide only for installing adb and unlocking bootloader.
This rooting guide is for the Lenovo Tab M10 X505X only.
I plan to work on a custom recovery for this tab as well and probably a custom rom in the future.
So please consider donating so that I can keep up the work.
Donations
Google Pay
This will work only on the version "TB-X505X_S001037_200718_ROW". Check it in the Settings > System > About Tablet > Build Number. If it is the newer "X505X_S001038_200819_ROW", do a factory reset and make sure it is the "TB-X505X_S001037_200718_ROW" before proceeding.
Once a custom recovery is made, OTA updates can be applied without losing root. So do not update the tablet until a custom recovery is developed for the device. I plan to develop a custom recovery for it as soon as possible, so please support me.
Anything that goes wrong in this tutorial is not my responsibilty. Proceed at your own risk.
Downloads
patched_boot.img
Step 1. ADB and Fastboot Installation [If adb and fastboot are already installed, skip to Step 2]1. Download the platform tools for your OS from this link.
2. Extract the zip file and place the contents in a folder "platform-tools".
3. To confirm if adb is working, open a command prompt "platform-tools" and run the following command.
Code:
adb version
If it returns the adb version, its done.
Step 2. Unlocking BootloaderWe have to unlock the bootloader inorder to root the device.
Warning: Unlocking bootloader wipes data on the device. It is recommended to backup your data. Proceed at your own risk.
1. Now in the tab, goto Settings > System > About Tablet. Multiple tap the "Build Number" till the developer options are enabled.
2. Goto the developer options and turn on the "OEM unlocking".​3. Power off the device.
4. Turn it on by holding Power Button + Volume Down. Once the screen turns on. leave the power button but continue holding the Volume Down button until the fastboot mode is shown.
5. Now open a command prompt in "platform-tools" and now run the following command:
Code:
fastboot oem unlock-go
Your Bootloader is now succesfully unlocked.​Step 3. RootingNow to root the tab, download the "patched_boot.img" from the top of this post. Copy the file to the "platform-tools" folder.
Make sure the tab is still in the fastboot mode. Otherwise go back into the fastboot mode as instructed before.
Now run the following command:
Code:
fastboot flash boot patched_boot.img
Congratulations, you have rooted your tab.:highfive:
To complete the process, run the following command.
Code:
fastboot reboot
Once the tab turns on, goto this link and download the latest version of Magisk apk and install it. It is required to control the root privileges for other apps.​That's all. You now have a rooted tab.:victory:
If this helped you, hit the thanks button.
And keep tuned for new stuff that are to come for this device.

Thanks for this thread for the TB-X505X.
Shamil Niyas said:
I plan to work on a custom recovery for this tab as well...
I plan to develop a custom recovery for it as soon as possible...
Click to expand...
Click to collapse
Have a look at this post for a TWRP that works with the TB-X505F. It might work for the TB-X505X, provided the X505X uses the SDA429 soc. That version of TWRP is unofficial and does not decrypt the data partition.
If the X505F version of TWRP works for you, then you won't need to patch the boot image - you can just install the Magisk update.zip in TWRP. This saves you from having to release a new patched boot image every time there's an OTA.
Shamil Niyas said:
Once a custom recovery is made, OTA updates can be applied without losing root.
Click to expand...
Click to collapse
With the TB-X505F/L, TB-X605F/L and TB-X705F/L we've found that you need to uninstall Magisk to apply OTAs. This is because Lenovo's OTA updater scripts verify you have unmodified boot, system, vendor and firmware partitions. So make sure you backup these partitions as stock.

Yahoo Mike said:
Thanks for this thread for the TB-X505X.
Have a look at this post for a TWRP that works with the TB-X505F. It might work for the TB-X505X, provided the X505X uses the SDA429 soc. That version of TWRP is unofficial and does not decrypt the data partition.
If the X505F version of TWRP works for you, then you won't need to patch the boot image - you can just install the Magisk update.zip in TWRP. This saves you from having to release a new patched boot image every time there's an OTA.
With the TB-X505F/L, TB-X605F/L and TB-X705F/L we've found that you need to uninstall Magisk to apply OTAs. This is because Lenovo's OTA updater scripts verify you have unmodified boot, system, vendor and firmware partitions. So make sure you backup these partitions as stock.
Click to expand...
Click to collapse
I gave a look at the TWRP image. Unfortunately, X505X does not boot into the recovery image. It would have been great if it worked. I guess it is because of the different processor, as you mentioned.
It is the same for X505X as well. OTA cannot be applied without uninstalling Magisk. So I guess OTAs are a no-go until a custom recovery is developed. The latest update is also just a boot image patch. So there is no way to use magisk on that.
Thanks for the advice.

But i updated to android 10 S001122_200915
Sir, thanks for the thread.,
But unfortunately my version is S001122_200915 and u had posted patched boot_img for S001037 version. I dont want to downgrade. Please make a patched boot_img for this version.

Excuse me if this was asked before. Is there a rooting method for TB-X505F? It's the model that is sold in Europe. I'm thinking of buying this.

ShAd0W_z0nE said:
Excuse me if this was asked before. Is there a rooting method for TB-X505F? It's the model that is sold in Europe. I'm thinking of buying this.
Click to expand...
Click to collapse
This post has instructions for the X505F, under "How do I root my device?".

cYBER~VeTeRaN said:
Sir, thanks for the thread.,
But unfortunately my version is S001122_200915 and u had posted patched boot_img for S001037 version. I dont want to downgrade. Please make a patched boot_img for this version.
Click to expand...
Click to collapse
I'm currently working on the twrp for this device. Once it is finished it should be able to root without downgrading.

cYBER~VeTeRaN said:
Sir, thanks for the thread.,
But unfortunately my version is S001122_200915 and u had posted patched boot_img for S001037 version. I dont want to downgrade. Please make a patched boot_img for this version.
Click to expand...
Click to collapse
Hello cYBER-VeTeRaN,
I have compiled a TWRP for X505X. You can find it here. Install the magisk zip from TWRP and you should be able to root your tablet regardless of the verison.:victory:
Hit the thanks button.

Shamil Niyas said:
Hello cYBER-VeTeRaN,
I have compiled a TWRP for X505X. You can find it here. Install the magisk zip from TWRP and you should be able to root your tablet regardless of the verison.:victory:
Hit the thanks button.
Click to expand...
Click to collapse
Thanks sir. Great job and I'm also from kerala, nice to meet you

Good afternoon.
I have this version ( Build number TB-X505F_S001142_210804 ROW ) of Android on my Lenovo TB X505F.
Can you tell me if this method works with this version of Android?

jsvenancio said:
Good afternoon.
I have this version ( Build number TB-X505F_S001142_210804 ROW ) of Android on my Lenovo TB X505F.
Can you tell me if this method works with this version of Android?
Click to expand...
Click to collapse
[RECOVERY][TB-X505F][UNOFFICIAL] TWRP 3.6.x for Lenovo Tab M10 HD
This version of TWRP works on the Lenovo TB-X505F (wifi). For the TB-X505X, see this thread. For the TB-X605F/L, see this thread. For the TB-X606F/L, see this thread. The X606F/L is the second gen M10 and it uses a Mediatek SOC. #include...
forum.xda-developers.com
Twrp for x505f

Umm where it says to download my os there is no link provided. Same goes for fastbook it takes me tomyour old guide and then there is no link where a person would think they would find it. Am I stupid and missing something or all the links broke/missing ?
I'd prefer to be stupid.... Just saying..

tombaldwin6 said:
Umm where it says to download my os there is no link provided. Same goes for fastbook it takes me tomyour old guide and then there is no link where a person would think they would find it. Am I stupid and missing something or all the links broke/missing ?
I'd prefer to be stupid.... Just saying..
Click to expand...
Click to collapse
Check his new guide, just flash twrp and flash magisk from there

Guys, I am stuck in a Bootloop after i tried that with the patched boot img. Can someone help?

Tamiiiiiii812 said:
Guys, I am stuck in a Bootloop after i tried that with the patched boot img. Can someone help?
Click to expand...
Click to collapse
Download rom, extract boot.img from it and flash it. Makw sure you download the right version.
You can find the rom here:- https://mirrors.lolinet.com/firmware/lenovo/Tab_M10_HD/TB-X505X/

cYBER~VeTeRaN said:
Download rom, extract boot.img from it and flash it. Makw sure you download the right version.
You can find the rom here:- https://mirrors.lolinet.com/firmware/lenovo/Tab_M10_HD/TB-X505X/
Click to expand...
Click to collapse
OMG IT WORKED. Thank you.

Thanks bro. I found what I needed..

Shamil Niyas said:
1. Download the platform tools for your OS from this link.
Click to expand...
Click to collapse
yeah, where is the link?

Booe said:
yeah, where is the link?
Click to expand...
Click to collapse
Just search for platform tools and download it.

Guys, i tried the above mentioned method but my device is showing (can,t load android system. your data my be corrupt. if you continue to get this message, you may need to perform a factory data reset and erase all user data stored on this device) after performing a factory data reset the device reboots and the welcome menu shows up after 15-30 seconds the device automatically shut down and again shows the same message (can,t load android system. your data my be corrupt. if you continue to get this message, you may need to perform a factory data reset and erase all user data stored onnn this device). this goes again and again......