Hey guys
my L7 is stuck and I ran out of ideas.
Here is what I did: I used KDZ to flash a rooted firmware on my LG (V20D_00_m.kdz) and it kinda worked (everything was factory reseted but w/e). Now a few weeks ago my LG suggested a software update, foolishly I did it and here's where it went to sh!t.
I can't get out of CWM even though I wiped EVERYTHING, and I can't update it through LG support tool because I can't enable USB debugging.
I Might sound a bit hysterical but pls help me out of this.
if I tell you that I brickei my L5, the screen went all buggy (so buggy that neither appeared the logo of LG) and could restore it, you believe? what you can do: take your mobile phone to technical assistance, cry to flood your home or follow this mini tutorial I will do:
1 - check if the drivers of their L7 are installed on your PC, if not, install (not sure how you will install them, but you'll need).
2 - Download KDZ Updater
3 - download the Stock ROM L7 (not in ZIP format like CyanogenMod ROMs but the KDZ format)
4 - go on KDZ Updater and select your ROM you downloaded
5 - Enter in "Download Mode" and conect your phone on your PC
6 - Give a click on "Launch Software "and wait to finish
7 - If you did not understand what I said and / or do not have at least some knowledge about Android, you can cry. But if you're rich, buy another mobile hahahahaha
Related
Hi all,
i have a problem, got a new Lg L7 P710, and i wanted to jailbreak/root etc. but i think i failed with it.
also i tried with KDZ updater, and installing LG modem and Lg Androidnet usb serial port (com6)/ and installed all those drivers needed. My SD card is still in the phone, but i can't see it in ''my Computer'' when my LG is plugged into mine laptop.. also the rooting part its failing.. btw my yellow screen for emergency is not normal, its kinda with stripes, and i can't see the ''emergency' 'word on the phone when it is yellow, sometimes it goes blue screen with stripes...
i don't think its a hardware problem, but i accidently deleted everything also in SD card, and in the phone self, its just like a Stock peg...and also i lost my warranty in 3 weeks -_-'', i can't do anything, only plugg it in mine laptop, and i hear a noise sometimes, dat it is plugged in, but only in ''Device manager'' I also read some other forums, with bricked or unbricked, or ADB ( also tried with this and CMD) but didnot recognise mine phone... as you can see, my phone is connected to mine laptop ( see pictures)
any solutions/help please? :crying:
try this
try to download your software version put it on a sdcard then try to enter recovery and then try to install from sd card.
u got here the original rom from http://forum.xda-developers.com/showthread.php?t=2167344 and some help
How to Unbrick / Return LG Optimus L7 II Back to Stock
Warning: I won’t be responsible for any damage to your device, this has been tested and working on my device, good luck!
Requirements::
• A Windows Based PC
• An LG Optimus L7
• Official stock firmware
• KDZ_FW_UPD_EN.zip
• LG Optimus L7 USB Driver
How to Unbrick / Return LG Optimus L7 Back to Stock Steps:
1. Download and install USB Drivers on your PC
2. Download the official stock firmware
3. Download KDZ_FW_UPDATE.zip and extract it,then open the folder where you extracted it and Start KDZ_FW_UPDATE_EN with Administrator Rights (Right Click on file and select Run As Administrator)
4. Once the program started, in Type select 3GQCT and in Phone Mode select EMERGENCY, then in KDZ File select the downloaded firmware and press open.
5. Make Sure your Phone is connected to the computer in EMERGENCY MODE( Remove the battery from the phone,then while pressing Vol- Connect the usb to the computer,a yellow screen must come up showing EMERGENCY)
6. Once you’ve done this,press Launch Software Update and let it work,the procedure takes about 5-10 Minutes,so don’t worry.
7. At the end of the procedure the phone will reboot and an LG Animated Logo will come up,and after some minutes KDZ_FW_UPDATE Will say you that there has been an error, don’t panic.
8. Congratulations.
Caution: Don’t unplug the USB cable until the setup has finished.
http://allphonefirmwares.blogspot.mx/2013/06/how-to-unbrick-return-lg-optimus-l7.html
Hi, I have same picture on my L7 display and I dont know what to do. I tried to reflash over KDZ, it seems that phone is installing SW before first reboot. After reboot KDZ updater stops working Any suggestion? Somewhere I found, that only way is to use JTAG.
...
I have the same problem,one of my frends is trying to put kit kat on l7 p710,but he is so stupid... he download and put firmware for l9... now i trying to repare it i can't find the phone in device manager... anyone find a solution? please HELP!!!
Hi everyone
please accept for my poor English straight away and that i am noob
i bought LG p700 from the ebay saying that it is stuck in a boot loop mode so i thought it will be an easy fix which is not at all,
what i found out that it has a clockwordMod Recovery v6.0.3.2 i am not really sure if it helps or not ,
i red i couple topic's how to go back to the stock Rom but it doesn't work for me the the KDZ doesn't found the phone, even thought when i connect it to the computer the windows 7 automatically installed the drivers of the phone,
also i tried to install from my sdcard cm-10-20131006-NIGHTLY-p700 but it didnt work , everything goes fine but in the end it steal stucks in the boot loop,
so is there anyone could help me with is phone i will appreciate it a lot , also i prepared to install a stock Rom because i am a bit an old fashion i got
KDZ_FW_UPD_EN and V20D_00.kdz but as i said when i tried to install it, it didn't go true because i got a message where it says that the phone was not found
many thanks
gugutm
gugutm1 said:
Hi everyone
please accept for my poor English straight away and that i am noob
i bought LG p700 from the ebay saying that it is stuck in a boot loop mode so i thought it will be an easy fix which is not at all,
what i found out that it has a clockwordMod Recovery v6.0.3.2 i am not really sure if it helps or not ,
i red i couple topic's how to go back to the stock Rom but it doesn't work for me the the KDZ doesn't found the phone, even thought when i connect it to the computer the windows 7 automatically installed the drivers of the phone,
also i tried to install from my sdcard cm-10-20131006-NIGHTLY-p700 but it didnt work , everything goes fine but in the end it steal stucks in the boot loop,
so is there anyone could help me with is phone i will appreciate it a lot , also i prepared to install a stock Rom because i am a bit an old fashion i got
KDZ_FW_UPD_EN and V20D_00.kdz but as i said when i tried to install it, it didn't go true because i got a message where it says that the phone was not found
many thanks
gugutm
Click to expand...
Click to collapse
Install LG PC Suite, the LG Mobile Support Tool and the LG L7 USB driver. Then try again. Make sure your phone is set on 3GQCT and EMERGENCY on KDZ.
Before you install a ROM, you're recommended to wipe data.
Bootloops can occurs in many ways, if you can logcat your problem, maybe we can help you.
F4uzan said:
Before you install a ROM, you're recommended to wipe data.
Bootloops can occurs in many ways, if you can logcat your problem, maybe we can help you.
Click to expand...
Click to collapse
hi there im stuck in lg logo i had 4.4.2 but i had some problems with my gps so i decided to go back on v20d i used kdz emergency 3gqct battery out phone in emergency mode and im stuck in lg logo please can someone help me and sorry if my english is bad im from croatia.
Q&A for LG Flash Tool 2014 - The best way to Flash LG KDZ Rom
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
d950
Im having issues with doing the OTA update for my Flex d950, says my phone is not registered. I am going to be upgrading from a rooted 4.2.2 to the 20b 4.4.2
If I do the CSE flash will I lose root? Has this also been confirmed to work on windows 8.1 ? i've been reading of people having issues. Or should I just do the normal flash instead of cse?
AJUDA
Galera to com um problema na hora de restaurar a rom do G2...sempre quando vai atualizar no lg flash tools para com 11% e no celular nao sai de 1% alguem me ajuda ai pq meu G2 só fica na tela de FIRMWARE UPDATE
THANK YOU!!!!!!!!
I could really not be happier right now!!!! THank you SOOO SOOO MUCH!!! Really appreciate it!
there are no pictures, pls update pictures or write down what to choose
LG Flash Tool 2014 this application does not works offline! It need internet connection otherwise works incorrect! Look below attached picture.
Stuck In Download Mode.
Phone: LG Optimus G Pro E988, Android 4.4.2
Updated the phone about 2 months ago with the tool, today I tried to flash the same KDZ file but forgot to copy it to the LG Flash Tool folder, now my phone is stuck in download mode(I tried a number of key combinations to boot it into recovery), I thought it was the LG Support Tool problem, tried to install it, but a window pops up saying I have to connect to the internet and try again, but I was already connected, Downloaded the latest version 1.0.7.1 of the tools, now installation stuck at just about 5 %(attached a snap shot), please help my phone is stuck in download mod.
freegame619 said:
Phone: LG Optimus G Pro E988, Android 4.4.2
Updated the phone about 2 months ago with the tool, today I tried to flash the same KDZ file but forgot to copy it to the LG Flash Tool folder, now my phone is stuck in download mode(I tried a number of key combinations to boot it into recovery), I thought it was the LG Support Tool problem, tried to install it, but a window pops up saying I have to connect to the internet and try again, but I was already connected, Downloaded the latest version 1.0.7.1 of the tools, now installation stuck at just about 5 %(attached a snap shot), please help my phone is stuck in download mod.
Click to expand...
Click to collapse
Yeah... This tool works incorrect. It brick my brand new LG G2 D802 32GB when I upgrade from V20B to V20G. The phone still is brick. I think unable to unbrick without send to LG repair service. I don't recommend use this application! I recommend use completely offline older method:
install on PC LGUnitedMobileDriver_S50MAN311AP22_ML_WHQL_Ver_3.11.3, install on PC LGMobile Support Tool (B2CAppSetup), control panel>show hidden files,folders, from folder UpTestEX_BY_BRIDE_2014>Apps copy the LGMLauncher and past it into folder LGMOBILEAX (Local Disk C:>Program Data>LGMOBILEAX), from folder UpTestEX_BY_BRIDE_2014>Apps copy the LGUserCSTool.exe and past it into folder B2C_Client (Local Disk C:>Program Data>LGMOBILEAX>B2C_Client), if possible in the phone run the USB Debug, if possible in the phone choose method of connection into LG Software, connect phone into PC and wait a moment for install drivers, run as administrator application UpTestEX_BY_BRIDE_2014, select KDZ file, select type: CDMA, PhoneMode: DIAG, CSE web upgrade test, Upgrade Start, Diffrent Country, Language
This method is a 100% offline-not need internet connection.
Good luck!
LG G2 stuck in Boot Loop after flashing firmware
Hi Guys i have a LG G2 which had been rooted and was running CM11 CyanogenMod Android KitKat 4.4.2.
I wanted to go back to stock, so flashed the phone using the LG flash tool 2014 which worked fine till it rebooted to the LG logo and rebooted again and again till battery went flat.
I can enter download mode by holding vol+ and plugging in the usb but can't do anything please could someone advise.
Thanks
For all of you with D802 model who bricked your device using this tool (like I did) use this one (link under) step by step and everything will be fine. This ia .tot method and you'll be 4.2.2 again.You just have to be able to enter download mode to save your phone with this method. It saved mine. Good luck
http://forum.xda-developers.com/showthread.php?t=2687929
wow
Am I supposed to not change language?
I'm stuck on phone screen (download mode) at 13%
Hi,
i used towelroot and used a programm to change my locale setting. I set it to German language and Antarctica location by mistake instead of German and Austria, and that terminated the Android UI over and over again. The phone instantly went into a loop restarting its UI. A reboot did not work, stuck on LG logo. I can enter download mode, but not factory reset.
Used your modded tool. It goes to 99% and then end with "abnormal program termination". It looks like the flashing worked, but the language setting is the same i guess because the phone is still stuck at the LG logo. I am using the normal flash, not CSE flash cause i want to rescue my data.
I leave the default setting cdma and diag. I tried Germany, different country and germany, republic of korea, and even korean, republic of korea in the window before the update starts.
Is there a way to force the Antarctica locale setting to go away without deleting all my data?
Got LG G2 32 gig, unlocked
I am on Sling 2.2.2 on F180L.
I want to go to stock..
Should I have to relock boot loader 1st or KDZ flash will automatically lock BL?
Stock KDZ file is 1.2GB. I assume this Tool won give any error?
Sent from My LG Optimus G F180L Sling 2.2.2 stock 4.4.2 rooted
Hi ppl!
Need some help, in lg flash tool only appers the normal way for flash! Never appers the option to wipe the phone complete.
I'm using win 8.1 64x and already install the additional software that OP indicate.
Any tip to resolve this?
Thanks in advance
Send from D802 32gb OptimusG3 v1.4.1+Dominax Kernel v8.7
LG G2 stuck
I was installing a new kernel using clockwork Rom Manager to reboot the phone in TWRP recovery, didn't know this was bad. So I had my G2 completely stuck on LG logo, no download mode, no recovery, can't even turn it off, then I tried LG mobile support tool, restored after many times a Rom, but when it boot it asks me some kind of PIN/Password, then I did the same using LG Flash tool by goind in download mode, but still the same, what can i possibly do? Thanks in advance
If you have download mode,look at my post #10. There is a link to solve your problem. It definetly solved mine and I only had download mode. Just follow steps 1by1. Don't know which version you have,mine is D802. I think it helps for D800/1/2/3
has anyone used this tool on LG-F370S, South Korea?
help please
i have LG G2 D802 32gb ... heres the details...
i tried to flash twrp recovery which lead me to fastboot with no recovery no download mode no adb connection just fastboot...
after two days of reading threads after threads i flashed "pgpt32g.img" "rpm.img" "sbl1.img" "sgpt32g.img" and "tz.img" with fastboot.. after that i finally saw my device booted normally.. but dont know why the touch went crazy... like theres something wrong with the screen... i thought i messed it up or its some software issue... so i downloaded D80220F_00.kdz and flashed it on my phone... once again i am stuck.. now on LG logo... after that i downloaded ""Europe OPEN D80220B_00"" "TMO-EE 32GB D80210B_00" and "UK Open 16GB D80210B_00" and flashed them one by one ... i am still at my LG logo phone doesnt go further....
now... i found these websites here on xda
http://lg-firmware-rom.com/
http://csmg.lgmobile.com:9002/csmg/b...heck2.jsp?esn=
i searched the firmware with entering my imei and both sites are giving me same kdz now... i flashed this file too... nothing happened all i see is LG logo and led changing colors....ALSO TRIED HARD RESETTING THE PHONE STILL NO HOPE...
hope you guys reply soon
thanks..
Empty "Language" list
Hi,
I have LG F70 D315.
I got an issue when choosing language from the "Language" list (see fig. attached).
Please give me a prompt on how to fix this issue.
Hello XDA-Community
Today i accidently briked my G2 (D802 KitKat 4.4.2). I was flashing it because i wanted to unroot it but during the process an error showed up and my phone was dead.
So i tried to fix it with this method http://forum.xda-developers.com/showthread.php?p=48765620#post48765620 but it didn't worked as planned.
Now i have an G2 which is stuck in a bootloop and i can't even reach the recovery or the download mode and i don't have any custom recovery installed.
Anyone who can help me with this get's an 10€/$ PSC. I can't give more because i dont have any money left (16 years old).
Big thanks to everyone who can help me with this
PS: Sorry for my bad english i'm not a native speaker
While you wait for an answer make sure your phone is kept charged.
Have you tried LG flashtool and your stock ROM?
make sure it's off, hold the VOLUME UP button while plugging it into your computer, and that should get it into download mode.
Next try using the TOT method (google it) and voila!
Yeah the problem is that i can't even reach the download mode and my computer doesn't recognize my phone it's just an qshub device. ;(
I had the same issue bricking my lg g2 and i was stuck with the logo and nothing more not even download mode,recovery etc...
The way i got it to stock was i installed the lg g2 drivers and from there on just flashed it with flashtools kdz and got it workking again i think this shoould help you out just plug your phone and install the drivers and use flashtools
Install this driver then report me back or cap screen device manager to me.I will help you for fee.
https://www.dropbox.com/s/a69s06mkpzao01m/qhsusb_bulk_DRIVER_G2.zip?dl=0
Hello guys!
Unfortunately I have managed to full brick my phone which has worked without any issues for more then 3 years.
My story:
1. Phone started to have random restarts, basicaly, when phone lagged little bit - it restarted phone.
2. When I did manual restart, I got into bootloop and could not get out
3. With a heavy heart I did a factory reset. - Problem with random restarts ontinued together with random bootloops.
4. Did maybe 5 more factory resets, nothing happened.
5. Found a tutorial to flash new firmware.I was on 5.0.2 D802 30d so I used same. (PC suite could not find my phone and LG support tool always freezed on SW install)
6. I used LG Flash tool with normal flash. - used *.kdz which I have downloaded via LG support tool - checked size with dl from source from xda and they were same so i used it.)
7. All success, but device keep restarting - i think no bootloop anymore.
8. I did full flash again with LG flash tool so have a clean install and hopefully fix everything.
9. Suddenly mid-install my phone auto-disconnected from laptop and even with Retry attemps I wasnt able to get it running again. Then my phone restarted itself and that was it.
Now I cannot go to recovery mode, I cannot go to Download mode, all I see is black screen (turns some light on little bit underneath but no data visible).
Also when connect to my Windows 10 laptop multiple discs trying to load and trying to format disk. (one of them contains folder image with some files inside).
I dont have root, I dont have any other tools installed on my phone, just a normal user.
I tried to download adb but i dont understand it much, and also it cannot find my device.
Is there any way how to still fix my phone or is it completely lost
If so, I please you for a dummies step-by-step list .
Thank you so much in advance. :crying:
So good news,
I managed to load img back with dd application.
My Download mode together with factory reset is working.
I have tried to flash it with LGUP and even with some accused usb disconnections I probably managed to flash new lollipop to my phone.
Now it is optimalizing apps to load android correctly. Only issue I have is low battery, it always drains it too quickly so it cannot load properly.
Any idea how to charge the battery? Every time I connect phone with usb cable it starts up into boot, possible bootloop (cannot say if it is because of low battery or real bootloop)
Thanks
Dude try to install crdroid 7.1.2 nougat rom of d802 this will fix your battery problem
root it and install TWRP with srktools 2.0
this is best way to root G2 5.0.1 lolipop
you can also use LG One Click Root to obtain root then don't update su binary and install Autorec of you model to get twrp
nudget said:
Hello guys!
Unfortunately I have managed to full brick my phone which has worked without any issues for more then 3 years.
My story:
1. Phone started to have random restarts, basicaly, when phone lagged little bit - it restarted phone.
2. When I did manual restart, I got into bootloop and could not get out
3. With a heavy heart I did a factory reset. - Problem with random restarts ontinued together with random bootloops.
4. Did maybe 5 more factory resets, nothing happened.
5. Found a tutorial to flash new firmware.I was on 5.0.2 D802 30d so I used same. (PC suite could not find my phone and LG support tool always freezed on SW install)
6. I used LG Flash tool with normal flash. - used *.kdz which I have downloaded via LG support tool - checked size with dl from source from xda and they were same so i used it.)
7. All success, but device keep restarting - i think no bootloop anymore.
8. I did full flash again with LG flash tool so have a clean install and hopefully fix everything.
9. Suddenly mid-install my phone auto-disconnected from laptop and even with Retry attemps I wasnt able to get it running again. Then my phone restarted itself and that was it.
Now I cannot go to recovery mode, I cannot go to Download mode, all I see is black screen (turns some light on little bit underneath but no data visible).
Also when connect to my Windows 10 laptop multiple discs trying to load and trying to format disk. (one of them contains folder image with some files inside).
I dont have root, I dont have any other tools installed on my phone, just a normal user.
I tried to download adb but i dont understand it much, and also it cannot find my device.
Is there any way how to still fix my phone or is it completely lost
If so, I please you for a dummies step-by-step list .
Thank you so much in advance. :crying:
Click to expand...
Click to collapse
You can fix using qhslb 2.0
You can find video on YouTube.