Related
I got the OtterBox Black Defender Case - MOTOROLA ATRIX (TM) 4G with the belt clip and built in screen protector. I kind of liked it at first but it keeps jabbing me in the side and I wish I could just put it in my pocket but it's too think to do so while sitting down.
So I'm looking to get another case that will mostly protect my phone from scratches and a few bumps here and there. So this means I need a screen protector too. It's hard to tell how the screen protector feels and how the case fits on the phone.
What have you used or seen that you like and why?
hiltun said:
I got the OtterBox Black Defender Case - MOTOROLA ATRIX (TM) 4G with the belt clip and built in screen protector. I kind of liked it at first but it keeps jabbing me in the side and I wish I could just put it in my pocket but it's too think to do so while sitting down.
So I'm looking to get another case that will mostly protect my phone from scratches and a few bumps here and there. So this means I need a screen protector too. It's hard to tell how the screen protector feels and how the case fits on the phone.
What have you used or seen that you like and why?
Click to expand...
Click to collapse
I currently use the anti-glare screen protectors that AT&T carries in store. It takes away a little of the brilliance of the screen but I don't mind. I'm also using the Incipio Feather case but for more protection I also did have the Speck Candyshell which fit it really well and did not impede the screen protector. The only reason I returned it was because the "outer-shell" was too smooth for me, I like the rubberized feel of the Incipio.
I have the OtterBox Commuter case on my Atrix. I really like it. It not nearly as bulky as the defender case but still provides seemingly decent protection.
Do these cases keep it from seating on the laptop dock properly?
Seconding the Otterbox Commuter. The naked Atrix felt kinda slippery, the rubber sleeve peeking through the clip on shell makes it feel secure in my hand.
Sent from my MB860 using XDA App
I've been rocking the otterbox impact case with full ghost armor. Works and feels great
squassss said:
Do these cases keep it from seating on the laptop dock properly?
Click to expand...
Click to collapse
Does the Otter Box cases pick up a lot of lint and other stuff in your pockets?
squassss said:
Do these cases keep it from seating on the laptop dock properly?
Click to expand...
Click to collapse
As far as the laptop dock, I'm not sure but with the multimedia dock I have heard that the Speck case can fit if the insert is taken out. If you use the laptop dock quite a bit I would go with the Otterbox Impact case because it would be the easiest to remove and put back on.
hiltun said:
Does the Otter Box cases pick up a lot of lint and other stuff in your pockets?
Click to expand...
Click to collapse
Yes, Otterbox cases are notorious lint magnets. It's a trade off for the protection.
Has anyone heard about "Skinomi TechSkin", "Great Shield", or "splash Masque"?
They are the ones that you can get off of Amazon.com.
I also have the Incipio feather case, works great so far, and is easier for me to hold on to. I work in a warehouse and from handling boxes all the time its hard for me to keep a decent hold on smooth plastic unless I try to crush it.
As far as a screen protector goes, I have not seen a need for one yet. I forgot I had my keys in my pocket when I put the phone in and didn't get any scratches.
diedemus said:
As far as a screen protector goes, I have not seen a need for one yet. I forgot I had my keys in my pocket when I put the phone in and didn't get any scratches.
Click to expand...
Click to collapse
Yea, I feel th same way. I usually take such good care of my phones that I never even get scratches on the screen protector but knowing my luck if I ever tried without one something terrible would happen.
Got the Otterbox Defender for mine. I'll happily have a thicker phone for the added protection.
body glove case
Body glove case seems to be the best fit for the atrix...for me, i.e slim, feels sturdy in hand and removes easily to allow fit with other moto accessories.
Just got the Incipio case and it's great so far. I also have a SGP ultra clear screen protector.
This should be in the accessories forum.
I like to use my phones naked!
Even if they get damage.
In fact, I happen to dislike very much how those protectors make the phone larger in the pocket.
If you know of anything for the Atrix which doesn't make it bigger please let me know.
Gold luck guys.
I also have the Otterbox Commuter case and no screen protector since the display is made out of Gorilla Glass.
Not using a screen protector. Just a bodyglove tpu case. Love it.
Sent from my MB860 using XDA Premium App
Using the skinomi body skin .. it's awesome. applying the back part was a little challenging but i got it down.. I failed on my screen though because I did it in low light.. so I didn't notice i still had some lint on the screen so you can see a little when it's bright.
darkamikaze said:
Using the skinomi body skin .. it's awesome. applying the back part was a little challenging but i got it down.. I failed on my screen though because I did it in low light.. so I didn't notice i still had some lint on the screen so you can see a little when it's bright.
Click to expand...
Click to collapse
How does the Skinomi feel on the touch screen?
Hey guys whats going on, Well Looking for a new case for my galaxy s5.
What do you guys recommend?????
Right now I have a OtterBox Defender case, it is a lil Big and already Broke on me, and the Silicone also has ripped.
Trying to see what everyone is using and what has the best protection. Im a construction worker so I like sumthing really durable. Thanks guys
UAG.
i also have the otterbox but i think it's horrible.. makes the phone twice as thick and much bigger.
now i ordered the ringke slim case, i also had a ringke on my nexus 4 and that one was fantastic.
Might want to check out thewirecutter's guide (no link because I'm new )
thewirecutter.com/reviews/best-samsung-galaxy-s5-cases/
Spigen
Slim Armor
Spigen
Yeah I was looking at the spigen tough armor. Looks good. But I also want something to protect the Glass of the phone.
Why would you 50$ for a phone case? On chinese webshops you can get cases like those for around 3-7$. They may not be of the same quality but in combination with a tempered glass protector you will get protection of around the same level!
Which is the best back cover for our one plus 5 ? Anybody from India , Please suggest.
Spigen Rugged Armor
Been covering my phone with it for almost 3 months. Good grip, no scratches, no drops etc... Fits well with fabric front foil or anti fingerprint screen protector.
niyas0 said:
Which is the best back cover for our one plus 5 ? Anybody from India , Please suggest.
Click to expand...
Click to collapse
https://www.amazon.in/gp/aw/d/B072YJGDRK/ref=yo_ii_img?ie=UTF8&psc=1
I am using it and pretty awesome
I'm using orzly fusion bumper and it's so awesome
Dbrand is awesome!
davionpeace said:
I'm using orzly fusion bumper and it's so awesome
Click to expand...
Click to collapse
And I'd love to get a review of the cover from your end along with some pictures. Am torn between Orzly Bumper and Ringke Hybrid Case
Ashish.akc said:
And I'd love to get a review of the cover from your end along with some pictures. Am torn between Orzly Bumper and Ringke Hybrid Case
Click to expand...
Click to collapse
I wouldn't get the ringke the bumper just gets super messed up on those. I'd say the best thing I like about orzly is that it just feels so much secure. You can check my review on Amazon.in I have some pics uploaded there too.
I can only say don't get the Kevlar one from the official site. You can't use the alert slider in that. And it just looks bulky. Got one and using it.
davionpeace said:
I wouldn't get the ringke the bumper just gets super messed up on those. I'd say the best thing I like about orzly is that it just feels so much secure. You can check my review on Amazon.in I have some pics uploaded there too.
Click to expand...
Click to collapse
I think because of the rubber sides it would feel more grippy compared to Ringke's sort of slippery material (I bought one for op3 last year). I had read all the reviews on Amazon and surely leaned towards Orzly only. What color do you have though?
Ashish.akc said:
I think because of the rubber sides it would feel more grippy compared to Ringke's sort of slippery material (I bought one for op3 last year). I had read all the reviews on Amazon and surely leaned towards Orzly only. What color do you have though?
Click to expand...
Click to collapse
I got the black one. The grip is hands down the best I've used. I've had many phones over the years and this is the most slippery one. But this case just makes me feel so much comfortable holding the phone.
davionpeace said:
I got the black one. The grip is hands down the best I've used. I've had many phones over the years and this is the most slippery one. But this case just makes me feel so much comfortable holding the phone.
Click to expand...
Click to collapse
You got me. Am buying one too
poor people buy cases
Have couple cases for oneplus 5 which I'm selling if anyone from India is interested in buying git can pm me. OP Sand stone, Spigen Rugged armour, spigen ultra hybrid... And more they are almost like new condition.
Sent from my ONEPLUS A5010 using Tapatalk
lekiaM said:
Spigen Rugged Armor
Been covering my phone with it for almost 3 months. Good grip, no scratches, no drops etc... Fits well with fabric front foil or anti fingerprint screen protector.
Click to expand...
Click to collapse
I can vouch for this, since I use the same case.
I use the spiegen case
Spigen Neo Hybrid for ruggedness and Nillkin basic is a decent average in all areas.
The OnePlus 5 Bumper Case Karbon direct from oneplus is the best!
Expensive but best protection. I tested it last night Fall from 1,5 m on the really rainy road without any damage (phone or case)
Greetings
Pics now attached!
I have always preferred minimalist cases, especially on a phone this gorgeous. I've always had great luck with the Ringke and Nillkin slim/thin fit cases but, this time around, when I went to pre-order my phone, the only slim cases available were manufactured by Spigen and Elago. Now, I LOVE Elgo cases because they're almost like not having a case at all, just like a skin. They offer no real drop protection, but are primarily designed for scratch protection. Absolutely no lip on the front to protect the display. Still, they fit the bill for me and are my case of choice when at home or the office. Places where I NEVER drop my phone and, if I do, it's on very soft carpet.
Anyway, I went ahead and ordered the Spigen slim case. While it DID look awesome and provided some added protection in the form of a slight lip at the top and bottom of the display, ultimately the case failed me. My phone is perfectly unscathed. However, the Spigen design results in a ton of flex and bend when removing the case. Eventually, this lead to the case cracking along the backside. Not acceptable.
Today I received my Ringke slim case (now available on Amazon) and I must say I'm VERY happy with it. The fit is perfect, almost no bend or flex when taking the case off or putting it on, and the lip of protection for the display along the top and bottom edge is even more pronounced than the lip on the Spigen model.
5/5 stars from me. An awesome, lightweight, nearly zero bulk case that offers excellent drop and scratch protection. If this is what you're looking for, look no further than Ringke's offering. Go get it!
pieces of cake said:
Pics to follow soon.
I have always preferred minimalist cases, especially on a phone this gorgeous. I've always had great luck with the Ringke and Nillkin slim/thin fit cases but, this time around, when I went to pre-order my phone, the only slim cases available were manufactured by Spigen and Elago. Now, I LOVE Elgo cases because they're almost like not having a case at all, just like a skin. They offer no real drop protection, but are primarily designed for scratch protection. Absolutely no lip on the front to protect the display. Still, they fit the bill for me and are my case of choice when at home or the office. Places where I NEVER drop my phone and, if I do, it's on very soft carpet.
Anyway, I went ahead and ordered the Spigen slim case. While it DID look awesome and provided some added protection in the form of a slight lip at the top and bottom of the display, ultimately the case failed me. My phone is perfectly unscathed. However, the Spigen design results in a ton of flex and bend when removing the case. Eventually, this lead to the case cracking along the backside. Not acceptable.
Today I received my Ringke slim case (now available on Amazon) and I must say I'm VERY happy with it. The fit is perfect, almost no bend or flex when taking the case off or putting it on, and the lip of protection for the display along the top and bottom edge is even more pronounced than the lip on the Spigen model.
5/5 stars from me. An awesome, lightweight, nearly zero bulk case that offers excellent drop and scratch protection. If this is what you're looking for, look no further than Ringke's offering. Go get it!
Click to expand...
Click to collapse
Do you think this will work with the whitestone dome glass protector?
Sent from my SM-G965U using Tapatalk
daddymikey1975 said:
Do you think this will work with the whitestone dome glass protector?
Click to expand...
Click to collapse
Absolutely, it will. I used it together with the Whitestone on my S8+ and Note8.
I won't use Whitestone anymore though. Way overpriced and far too fragile. They also tend to lift up over time, even with a perfect installation and no drops or knocks. There are smarter options available, if you're patient.
pieces of cake said:
Absolutely, it will. I used it together with the Whitestone on my S8+ and Note8.
I won't use Whitestone anymore though. Way overpriced and far too fragile. They also tend to lift up over time, even with a perfect installation and no drops or knocks. There are smarter options available, if you're patient.
Click to expand...
Click to collapse
I had a whitestone on my S7 Edge for a year and my note 8 for the last 6 months with good results.
I'm open to other suggestions though...
Sent from my SM-G965U using Tapatalk
Pics now attached. You can see my fingers on the other side of the phone with it face down on the table, demonstrating the lift the lip provides. The display is well-protected. This is surely the slimmest case you can get for the S9+ that still offers drop protection and guards against screen damage in the event of a fall.
You can also see that the camera is well protected. I was even able to fit a large metal plate behind the case to allow it to attach to my car mount, and I've positioned it in such a place as to avoid any interference with wireless charging. Everything works properly.
I got this case and love it as well! Even thinking about getting some of the other colors available, for days when you need a little extra protection their onyx case is not bad either, still thin but not as slim
vwite said:
I got this case and love it as well! Even thinking about getting some of the other colors available, for days when you need a little extra protection their onyx case is not bad either, still thin but not as slim
Click to expand...
Click to collapse
Agreed. Top notch case.
ugly AF case, those buttons cutouts must not be on the case.
x111 said:
ugly AF case, those buttons cutouts must not be on the case.
Click to expand...
Click to collapse
Sure, the case isn't for everyone. Some people (perhaps you?) prefer a huge bulky case with all kinds of patterns colors and textures that detract from the clean lines and curves of the devices. But this is a plain black case, with almost nothing to it. What about it is "ugly," in your opinion?
Also, I don't even know what this means: "those buttons [sic] cutouts must not be on the case." The cutouts must not be on the case? What?! Can you help us understand what the heck you're saying?
pieces of cake said:
Sure, the case isn't for everyone. Some people (perhaps you?) prefer a huge bulky case with all kinds of patterns colors and textures that detract from the clean lines and curves of the devices. But this is a plain black case, with almost nothing to it. What about it is "ugly," in your opinion?
Also, I don't even know what this means: "those buttons [sic] cutouts must not be on the case." The cutouts must not be on the case? What?! Can you help us understand what the heck you're saying?
Click to expand...
Click to collapse
yeah he probably prefer one of those ugly otterbox or UAG cases that instead of cutouts have huge layers of silicone or tpu covering the buttons and making them harder to press. Those cases sell wel so yeah a lot of people like them, to each their own.
x111 said:
ugly AF case, those buttons cutouts must not be on the case.
Click to expand...
Click to collapse
What case are you using?
Care to show where you positioned the metal plate?
Sent from my SM-G965U1 using Tapatalk
yeah, uag cases are beautiful but also have some ugly cutouts where buttons are.
pieces of cake said:
Pics now attached. You can see my fingers on the other side of the phone with it face down on the table, demonstrating the lift the lip provides. The display is well-protected. This is surely the slimmest case you can get for the S9+ that still offers drop protection and guards against screen damage in the event of a fall.
You can also see that the camera is well protected. I was even able to fit a large metal plate behind the case to allow it to attach to my car mount, and I've positioned it in such a place as to avoid any interference with wireless charging. Everything works properly.
Click to expand...
Click to collapse
tips on how to move the clock to the middle of the screen like yours?
x111 said:
yeah, uag cases are beautiful but also have some ugly cutouts where buttons are.
Click to expand...
Click to collapse
UAG cases don't compliment the design of the S9/S9+ at all. They're functional, and offer great protection, but they're bulky and rugged-looking. The S9 is not bulky or rugged-looking. That's not its design.
Surprise! Button cutouts allow for direct access to the buttons. Keeping the feel and function of those buttons STOCK.
xxlikquidxx said:
tips on how to move the clock to the middle of the screen like yours?
Click to expand...
Click to collapse
Substratum/Andromeda System Mods.
Thanks for the detailed reviews and pics. Although this case isn't for me, I appreciate your review in that it helped me decide the same ??Guess I'll stick to the one that comes with the phone out of the box.
IndDoc said:
Thanks for the detailed reviews and pics. Although this case isn't for me, I appreciate your review in that it helped me decide the same ??Guess I'll stick to the one that comes with the phone out of the box.
Click to expand...
Click to collapse
Your phone came with a case?
crzycrkr said:
Care to show where you positioned the metal plate?
Click to expand...
Click to collapse
Right there.
pieces of cake said:
Right there.
Click to expand...
Click to collapse
Sorry, didn't realize the rotation was off, but you still get the idea, I'm sure.
Looking to order a compatible case with Whitestone dome glass. Looking for something that doesn’t sit right on top of the glass, just in case it pushes it up when in and out of the pocket and bag
Spigen. Using it with Whitestone. No issues.
Serpentinefire76 said:
Spigen. Using it with Whitestone. No issues.
Click to expand...
Click to collapse
Which spigen case?
I would hazard a guess that all. Except of course the ones that come with screen protector
Sent from my SM-G965F using Tapatalk
Serpentinefire76 said:
I would hazard a guess that all. Except of course the ones that come with screen protector
Sent from my SM-G965F using Tapatalk
Click to expand...
Click to collapse
Not at all true. There are threads here with lists in them
Sent from my SM-G965U1 using Tapatalk
The rugged armor supposedly doesn't fit, which is a shame as i was using that one on each and every one of my smartphones. The tough armor fits perfectly though, and i am quite happy with it. The kickstand might be useful but doesn't seem to be that robust. Time will tell.
Another favorite of mine was the ringke onyx case. That one does not fit.
I've used the Spigen Neo Hybrid in the past and currently the UAG Monarch with the Whitestone and have had zero issues.
Ati75 said:
The rugged armor supposedly doesn't fit, which is a shame as i was using that one on each and every one of my smartphones. The tough armor fits perfectly though, and i am quite happy with it. The kickstand might be useful but doesn't seem to be that robust. Time will tell.
Another favorite of mine was the ringke onyx case. That one does not fit.
Click to expand...
Click to collapse
That's weird. The ringke onyx fit my s9+ perfectly.
tsuchiro said:
That's weird. The ringke onyx fit my s9+ perfectly.
Click to expand...
Click to collapse
I meant in combination with the whitestone dome glass. The upper lipp was just sitting too tight. I didn't want to risk the glass to peel up, so i deemed it as unfit.
You should have a look at this list, made for S9/S9+: https://docs.google.com/spreadsheets/d/11upU3Lh5bIZl3rPAoN23gCxBDU6MwkNZyEzY01HLUeE
Unfortunately, even if one case from company works, it doesn't mean that the rest are compatible. There are even cases of the same lineup (Spigen Ultra Hybrid) which are compatible and others aren't. In my opinion, if you want an ultra-thin case, then the Torras is the best bet. The Spigen Neo Hybrid is great (got one) for slim ---but adequate- protection. If you want the best protection possible, you should be looking at the UAG Monarch (expensive) or Otterbox Symmetry & Strada
Personally, I gave up on the Whitestone and now got myself an Otterbox Strada. Partly due to VR compatibility (I do AI research and now working on a VR project) and partly due to installation problems; once with the phone sitting tool was weirdly tight (compare to the 2nd kit I got) for the phone and the other it was my fault. Also, I got tired to looking for cases that are compatible. VR
I used that list posted above and this has been my experience so far.
I can confirm that UAG Plasma will push on the Whitestone.
The Spigen Neo Hybrid does work with Whitestone, but there's very little separation between case and Whitestone. The case does extend past the added thickness of the glass, so it will protect the Whitestone if placed face down.
Samsung Alcantara case doesn't seem to push the Whitestone despite seemingly touching. Perhaps the alcantara fibers makes it look worse than it actually is, but I didn't want to take the risk.
I'm currently using a Tech21 Evo Tactical and it gives the largest space to the Whitestone than any of the previous covers above. It's also a very thin case, yet has great drop protection. Lastly, this case provides more face down protection than the Neo Hybrid.
I went with the tech21 evo tactical due to @coiledwire post above
coiledwire said:
I used that list posted above and this has been my experience so far.
I can confirm that UAG Plasma will push on the Whitestone.
The Spigen Neo Hybrid does work with Whitestone, but there's very little separation between case and Whitestone. The case does extend past the added thickness of the glass, so it will protect the Whitestone if placed face down.
Samsung Alcantara case doesn't seem to push the Whitestone despite seemingly touching. Perhaps the alcantara fibers makes it look worse than it actually is, but I didn't want to take the risk.
I'm currently using a Tech21 Evo Tactical and it gives the largest space to the Whitestone than any of the previous covers above. It's also a very thin case, yet has great drop protection. Lastly, this case provides more face down protection than the Neo Hybrid.
Click to expand...
Click to collapse
Did you try the tough armor?
mys3 said:
Did you try the tough armor?
Click to expand...
Click to collapse
No, I haven't tried it yet. I'm usually a minimal case user, so UAG Plasma is just about as big as I'd want to go.
coiledwire said:
No, I haven't tried it yet. I'm usually a minimal case user, so UAG Plasma is just about as big as I'd want to go.
Click to expand...
Click to collapse
I've got the whitestone on perfect so in a aged to try other cases in case they disturb it!
mys3 said:
I've got the whitestone on perfect so in a aged to try other cases in case they disturb it!
Click to expand...
Click to collapse
Agreed. My Whitestone install is 99.9% perfect and I don't want a case to mess with it. I'm loving this tech21 case. Its pricy for what it is, but it works really well with the Whitestone, looks nice, and feels solid.
UAG monarch fits really well, plenty of space like the tech21 tactical
Has anyone tried the Griffin Survivor Strong Clear?
I can confirm the Whitestone Dome is compatible with the Griffin Survivor Strong Clear case.
Does anyone know if the mous cases are compatible?