I have a Galaxy S4 SGH-I337 i9500 running Lollipop 5.0.1. For the life of me I just can't get this thing rooted.
I have tried several different CF-autoroot files such as CF-Auto-Root-ja3g-ja3gxx-gti9500.tar.md5, and a very vague CF-Auto-Root.tar.
I have tried running Odin in both regular and administrator modes.
I have tried flashing PhilZ touch recovery philz_touch_6.12.8-i9500.tar.md5
USB debugging is on, Unknown Sources is on, and I've tried both with and without Verify apps via USB on.
Odin always fails. It will say recovery up at the top, and almost immediately turns red and gives me a giant FAIL every single time. I have even tried Kingo Root and it will hit about 50% and fail. I've reached I point where I'm not sure what else to try. Any advice?
kalizar said:
I have a Galaxy S4 SGH-I337 i9500 running Lollipop 5.0.1. For the life of me I just can't get this thing rooted.
I have tried several different CF-autoroot files such as CF-Auto-Root-ja3g-ja3gxx-gti9500.tar.md5, and a very vague CF-Auto-Root.tar.
I have tried running Odin in both regular and administrator modes.
I have tried flashing PhilZ touch recovery philz_touch_6.12.8-i9500.tar.md5
USB debugging is on, Unknown Sources is on, and I've tried both with and without Verify apps via USB on.
Odin always fails. It will say recovery up at the top, and almost immediately turns red and gives me a giant FAIL every single time. I have even tried Kingo Root and it will hit about 50% and fail. I've reached I point where I'm not sure what else to try. Any advice?
Click to expand...
Click to collapse
Do you own a SGH-i337 or a GT-I9500?. Looks like a franki anyway.
And if it's a frankenstein, return the phone.
What the other two are trying to say is that you have a frankenstein phone. Meaning that the phone was, probably, once broken and repaired with parts from other S4 models. Which also gives you false reports on the phone model.
Reason for this assumption is that the SGH-I337 is the AT&T version of the GT-I9505. So it can't possibly be I337 and I9500 at the same time
Another problem is that, if I'm not mistaken, AT&T S4 has the bootloader locked. This means you can't use CF-Auto-Root on it. It's even stated on CFAR thread.
You might want to try GT-I9505 root methods. But it's risky with such a phone..
CF-Autoroot if I recall doesn't work because the bootloader prevents access to the system, even in recovery, and the SuperSU payload requires system access. Unless the bootloader is one of the old versions that can have the lock bypassed, pretty much the only option available is to install Safestrap recovery, and use it to bypass the AT&T ROM altogether.
OP, as I just told another guy on the forums about a half hour ago, run, don't walk, and get your money back. There are too many headaches involved with Frankenstein phones, and purchasing one is a horrible deal. You have a locked bootloader, which makes rooting nearly impossible. Installing custom ROMs of any kind requires using up internal storage since you can't change the stock ROM. There's no guarantee that you'll even get LTE service on the phone because the bands don't match what is used in the rest of the world. Lastly, as this is a tampered phone you have no warranty of any kind.
Related
I have a Samsung Galaxy S4, the Sprint version. I wasn't able to send or receive picture messages and I thought it might have something to do with my APN being wrong (I bought the phone on eBay and had it flashed to nTelos, my provider) but I wasn't able to edit the APN and nTelos was, as usual, no help. So I figured I'd just root it and be able to edit it then!
It was at that moment I stuck my shovel into the soft dirt and started digging.
Essentially, I believe my phone is without an OS at this point. I have tried using ODIN to put a recovery on there so I can at least do something, but now even ODIN is freezing up when I try and flash the Clockwork recovery. I am stuck on the Samsung S4 logo screen and while I can enter download mode I don't think I can enter recovery mode - at least, it hasn't been working tonight. I don't remember everything I've done to my poor phone, but it has to be hurting after the beating I've put it through. I originally tried to root it though I don't think I was successful because the Root Checker said I wasn't, though I'm not sure what I was doing wrong then. Things went downhill from there.
I've read through thread after thread hoping for something that would work, but I've given up trying to use other people's problems to solve my own. This is me saying "Uncle". I require assistance. Let me know what you need from me to provide me with the help I need.
Also - I have ADB on my computer and I think I have a basic understanding of how to use it, but since I can't enter recovery mode I can't do anything other than pat myself on the back for figuring it out. I think my first problem at this point is ODIN. I uninstalled KIES so that's not interfering (and don't even get me started on KIES - I installed KIES and it told me to install KIES3 which told me my device wasn't supported... which is crap because it's running Android 4.3 - or was before I got to it).
Thanks,
If you're sure the phone was on 4.3, then your options are limited thanks to Knox. You can only restore a 4.3 (MJA) based ROM to the phone via Odin, whether it is stock or custom. Easiest giveaway is if you see a line for "Knox" on the Download Mode screen.
At this point you should look in the ROM directory here for a full ROM (xxxxx.tar.md5), either MF9 (4.2.2) if it doesn't have Knox or MJA (4.3) if it does. If you cannot use Odin to put a full ROM on there, then you will need some more serious help.
Odin the stock 4.3 MJA OEM. Will return your phone to a stock unrooted state.
http://forum.xda-developers.com/showthread.php?t=2522810
Hi all,
Phone Details:
Spring Galaxy S4
Baseband Version L720TVPUBNG5
Used CF autoroot
This all started a few days ago. The latest OTA update came out and my phone kept telling me I had insufficient storage for the update. I figured it was because I had it rooted. I followed QBking77's video for Unroot / Unbrick. Downloaded all files recommended in the video.
Every time I try to flash with ODIN I get a failure. I have tried three different .tar versions at this point, it always seems to fail after "aboot" attempts to flash. Two different cables, both came with an SGS4.
I finally had enough and used the factory reset. After factory reset I used KIES for my update. The phone took it fine and rebooted. Although now I have no WIFI.
When initiating WIFI it will tell me that the security application has rejected a request to protect my phone. I deleted lookout security even though I have never used it.
Does this have something to do with KNOX? Knox flag is at 0x1 so I know it is tripped. Is there a way to completely flash my phone back to a stock state with the original recovery and rom?
Are there any options for me to get my phone back in order. I really dont give a **** about root or roms, I just need my WIFI. Would my best bet be to use a custom firmware?
Your correct thread have to go: HERE.
I have tried everything I can possibly think of in a short period of time, and need an answer in a hurry. The phone (Verizon Samsung Galaxy Note 3 N-900V) was rooted back when kitkat was the main OS using geohot's towelroot (or possibly kingo root I can't remember which i used after I got the phone and upgraded from ICS). I have 2 of these exact same phones, used the exact same rooting method, and unrooted by uninstalling the superuser app, rebooted, and installed the OTA update to lolipop. My phone works fine, (the one I'm typing from) however, my other phone decided to take a dump. It's a software bug between the samsung firmware and the new lolipop OS. It was working for several months, then all the sudden it wouldn't recognize/register the APN. Now it doesn't see anything just about with the phone. Not even the IMEI from the phones serial number. The sim card has been replaced twice and has worked for a matter of a few hours, however, upon restarting the phone, it goes back to no service, and nothing is registered or recognized. I reflashed the phone with the stock 5.0 Lolipop using Odin several times to no avail. My phone (one I'm using now) once did this months ago, and I was able to access the service menu and reregister the SIM card and phone has worked fine since. With this other phone, I can't get into the service menu at all because nothing is registering. So, after reflashing 4 or 5 times, factory reseting from both the OS and from recovery booting, it still has the same issue. Here is my question. It used to be when I reflashed, the custom padlock would disappear. I'm getting a new phone tomorrow, and I need to get rid of the custom padlock before I return the old phone. I can use Odin, or whatever but it has to be something, I can do while it stays stock. The knox counter has not been tripped, and the flash counter is not tripped nor showing anything on the download mode. Everything lools, and feels stock, except that custom padlock. Is there a way to get rid of that custom padlock unrooted, by reflashing? I even used a pit file to repartition, but that didn't work either. Need help A.S.A.P.!
I would just hard brick the phone just before returning it...they will just throw it out at that point and your secret will be safe.
Hard Brick
xxperrin said:
I would just hard brick the phone just before returning it...they will just throw it out at that point and your secret will be safe.
Click to expand...
Click to collapse
You thinking maybe a NAND erase?
Hard Brick
I've thought about flashing the wrong rom too but dunno if that will work 100%. I either need to fix it, or make it 100% unrecoverable. Any advice?
I just swapped from my Amaze 4g, to a used Note 3, and I'm a little lost as far as where I should start.
It says that it's on 4.4.2, and that I cannot update due to a modified system.
Basically, I would like to get updated to 5.1.1 (or as close as is official for the Note 3), and root it.
I'm afraid I'm not familiar with Samsung devices, and because I purchased this from ebay, I don't know how to tell the exact state that the former user put it in (I expected they would return it to stock prior to selling).
It's currently a T-Mobile branded, SM-N900T, on 4.4.2, build is KOT49H, security software MDF v1.0 release 2. Kernel is 3.4.0-660648.
It is supposedly unlocked for carriers, though I have not attempted a SIM card use yet, until I can tell that what I have is a valid device and the IMEI is checked out.
Any thoughts on how to validate the IMEI, and sort out how to get my new phone up to date would be appreciated. As I stated, I expected the vendor would have returned it to stock, but that is clearly not the case, so I don't want to accidentally boot loop it by doing something I shouldn't. I have not owned a Samsung before, so I want to be careful on how it differs from my Nexus 7, Amaze 4g, and Droid X, as they're all obviously very different in the OS area.
Thank you for the help1
Download tbe stock 4.4.2 rom and use odin to install. Then you will get the OTA updates.
Sent from my SM-N900P using Tapatalk
There is no stock 5.1.1 for note 3, only cm12.1/ aosp. Latest is 5.0 and you can use odin to flash. Maybe it's rooted that's why you can't update.
bladebarrier said:
I just swapped from my Amaze 4g, to a used Note 3, and I'm a little lost as far as where I should start.
It says that it's on 4.4.2, and that I cannot update due to a modified system.
Basically, I would like to get updated to 5.1.1 (or as close as is official for the Note 3), and root it.
...
Thank you for the help1
Click to expand...
Click to collapse
Some apps to install from Play Store...
Phone INFO Samsung - this will tell you all about your phone and the firmware etc.
Root Checker Basic - tells you if you are rooted or not.
SuperSU - this is so valuable you should buy the Pro licence. Chainfire does some great work for our phones.
TWRP - I have the zip version on my extSDCard and an Odin version on PC in case I have to rebuild from a Stock firmware. CWN works OK but most ROM builds seem to be for TWRP I think and a backup from one will not work on the other.
I don't know your previous phone so you probably need Odin v3.09 - this sits on PC and lets you flash firmware to the phone. (connected by USB)
For which you need Samsung USB drivers so the PC will recognise the phone. Install on PC before connecting phone.
Then do some browsing and find the processes to root your phone and install the ROM you want. If you just want Stock and access to all your phone, you can root it after flashing the original v5.0 download (from Sammobile or similar site - note on Sammobile you need a free account to DL) and then install Custom recovery (if wanted - it WILL trip the Knox flag but that may not matter given it's 2nd hand and might already be tripped anyway)
Read, make SURE you understand what is being said BEFORE you do anything - ask if you don't.
Good luck...
N9005 Lollipop brick
Hi All, just need a huge help here, a friend of mine has been using a N9005 which was auto restarting, she went online and downloaded this firmware...N900AUCUEOC1_N900AATTEOC1_N900AUCUEOC1_HOME.tar.md5....2.5GB in size...and flashed it, but the phone is stuck in boot loop even after recovery wiping data and cache, the phone can boot into download mode but re flashing the firmware always fails.....is there a solution for this.....please help
Thank you all for the info, especially the detailed info from Journyman16. I checked, and it is flagged as custom, which is fine, so I'm going to go ahead and try to return to mostly stock, update it, and root it.
Ok, everything went well. I had to do two attempts at rooting, but I think it's just one of those things where sometimes it doesn't restart into the process every time.
All seems good. I'm on 5.0, rooted, busyboxed, and smooth sailing.
Thank you all, again, for the tips. The Note 3 is running very well. Thank you to all of the devs that have made this process so refined. I've donated to you before, and did so again today. It's outstanding to have such well versed coders, on XDA, helping out the community.
mjmbirige said:
Hi All, just need a huge help here, a friend of mine has been using a N9005 which was auto restarting, she went online and downloaded this firmware...N900AUCUEOC1_N900AATTEOC1_N900AUCUEOC1_HOME.tar.md5....2.5GB in size...and flashed it, but the phone is stuck in boot loop even after recovery wiping data and cache, the phone can boot into download mode but re flashing the firmware always fails.....is there a solution for this.....please help
Click to expand...
Click to collapse
You have never learned not to ask in others posts? What does your problem has to do with this topic at all?
When you need help. Just click on Q&A then Create a new thread. How hard is it?
I've got a S4 AT&T running OK2 with root and it ran my AirVoice Wireless SIM perfectly fine for a month while I researched and got a new phone. I'd now like to use it as a backup phone with a FreedomPOP SIM but it's giving me grief about "SIM network unlock PIN". This is the carrier lock correct? I found a tutorial that has you go into the Service Mode and turn off NETWORK LOCK. This tutorial doesn't seem to work (missing the options) in OK2. Do I have to downflash to 4.2.2 in order to get these options? If so, how do I go about doing that? I put OK2 with root on this phone but that process took 2 days and with all the mixed info out there and different versions, it's confusing to say the least.
My other question is, I tried flashing TWRP (jflteatt) and I believe I ended up with the "software not authorized by AT&T" error. Doing some reading, it looks like this may be due to not using a loki'd TWRP?
Any pointers/tips would be much appreciated. All this Samsung stuff is way over my head despite having rooted, recoveried and rom'd maybe a dozen Android devices. I much prefer LG and Moto
natenkiki2004 said:
I've got a S4 AT&T running OK2 with root and it ran my AirVoice Wireless SIM perfectly fine for a month while I researched and got a new phone. I'd now like to use it as a backup phone with a FreedomPOP SIM but it's giving me grief about "SIM network unlock PIN". This is the carrier lock correct? I found a tutorial that has you go into the Service Mode and turn off NETWORK LOCK. This tutorial doesn't seem to work (missing the options) in OK2. Do I have to downflash to 4.2.2 in order to get these options? If so, how do I go about doing that? I put OK2 with root on this phone but that process took 2 days and with all the mixed info out there and different versions, it's confusing to say the least.
My other question is, I tried flashing TWRP (jflteatt) and I believe I ended up with the "software not authorized by AT&T" error. Doing some reading, it looks like this may be due to not using a loki'd TWRP?
Any pointers/tips would be much appreciated. All this Samsung stuff is way over my head despite having rooted, recoveried and rom'd maybe a dozen Android devices. I much prefer LG and Moto
Click to expand...
Click to collapse
Yeah you're carrier locked. I think you can only downgrade to NB1 from OK2, not sure you can carrier unlock on NB1 or not. As for installing TWRP you can't due to the locked bootloader. You can only use safe strap recovery and boot only custom touch wiz roms. Loki only works on the MDB and MDL bootloaders, once you've upgraded the bootloader past MDL, you can't go back.
If the AT&T phone is like the i337m and m919, you may be able to flash down to 4.4.2, flash a 4.2.2 modem, root, run regionlockaway, upgrade modem back to 4.4.2.
Thanks for the replies. I grabbed NB1 from here: https://forum.xda-developers.com/showthread.php?t=2616221
and flashed it via Odin. All went well but when it came time to follow various instructions I found online, they either yielded no unlock or the options weren't in the menu. I don't think the free unlock trick via the service menu works on 4.4.2/NB1.
I researched a bit more and feel very stupid with one of the results that came up... AT&T offers online unlocking of their devices and you don't even have to be one of their customers! I figured I could go to one of their retail stores but also figured they would deny me since I'm not a customer. I'll be jiggered though, here it is: https://www.att.com/deviceunlock/
Slapped my IEMI in with my e-mail and in less than an hour or so, I got my unlock code for free. AT&T said they would e-mail it but I checked back on the status page and found the code there. Hopefully this helps other people.
So, moving forward now, is OK2 the best I can do with a locked bootloader? I ran it for a while but I found that I burned through my data real quick because when I would leave my WiFi coverage and come back, it would reconnect but for some reason wouldn't actually use WiFi (data was still on, had the 4G icon) until I restarted the phone. Basically, every time I left and came back home, I had to restart my phone. Is this a known issue, did I botch something in the install process? I may make another thread for this.
*EDIT*
Running OK2 for a while, I no longer have the WiFi issues I had before. Doing some thinking, I can only attribute the issue to either incorrectly followed steps the first time around flashing OK2 or the use of the debloater script found in the OK2 downloads thread. I've been using Link2SD to remove system apps and so far haven't removed anything that has affected WiFi.