Download the LVY48C factory image from here.
Source
and its right here, with all the other n6 factory images https://developers.google.com/android/nexus/images?csw=1#yakju
simms22 said:
and its right here, with all the other n6 factory images https://developers.google.com/android/nexus/images?csw=1#yakju
Click to expand...
Click to collapse
Using this just fine with my N6 on AT&T. No one tells me which factory image I can use on what network. Shame on Google. Lol.
Finally!!!
Sent from my Nexus 6 using Tapatalk
qnzesc0bar said:
Using this just fine with my N6 on AT&T. No one tells me which factory image I can use on what network. Shame on Google. Lol.
Click to expand...
Click to collapse
What version were you running before updating? Is everything working ok after you updated to this new 48C release?
Candy[MAN] said:
What version were you running before updating? Is everything working ok after you updated to this new 48C release?
Click to expand...
Click to collapse
I have used both LMY47Z and LYZ28E. I just recently switched to this. All work equally as good honestly. The only difference are the radios and bug fixes (LMY47Z being the oldest of the 3, LVY48C being the newest). Everything has been working great for me. I have also used multiple releases on T-Mobile before I switched back to AT&T. You will lose the WiFi calling (doesn't show up in the settings anymore because AT&T hasn't provisioned it) and VoLTE (they are slowly deploying it out everywhere) however. Just make sure that you do a clean install (wipe data and clear cache). You will have issues if you switch from one version of 5.1.1 to another without doing this.
Ok, I am very new for my N6. My N6 is rooted on LMY47Z with bootloader unlocked, un-encrypted with TMWP recovery. According to my knowledge, I have to convert to flash factory recovery before I update to LVY48C? Am I right?
LMY47Z to LVY48C
is there a way to flash from LMY47Z to LVY48C without a wipe?
Try this: http://forum.xda-developers.com/showthread.php?t=3118057
shamelin73 said:
is there a way to flash from LMY47Z to LVY48C without a wipe?
Click to expand...
Click to collapse
Using fastboot, flash all image partitions except the userdata.img one. That will upgrade you without wiping your device.
Thank you both. I will get this done this weekend.
Sent from my Nexus 6 using Tapatalk
shamelin73 said:
is there a way to flash from LMY47Z to LVY48C without a wipe?
Click to expand...
Click to collapse
Just flash the system image.
Does anyone here know if this factory image installs any specific Project Fi apps by default?
Flashed only system.img and everything is working fine.
Flashed without wiping and everything is also working fine. A Project Fi app is included (does not show up in my apps drawer) in this ROM but can be easily disabled.
Flashed LVY48C via the NRT.
“Flash Stock + Unroot” > Enable ‘No Wipe Mode’ + ‘Force Flash Mode’ worked great and its as if I just took the normal OTA. Re-rooted after and all seems to be well.
I think the reception in my office (a basement) might be slightly not as strong, but sms still works fine over wifi. So no real issues to report on it.
I'll flash this on my VZW nexus 6 a bit later today. The M preview just isn't going to work for me.
For what it's worth, it doesn't work for Sprint. It gets stuck saying no SIM and the phone app force closes. I reverted and everything was fine again.
Sent from my Nexus 6
Guys,
I have just finished making a stock flashable rooted Project Fi rom here: [ROM] [5.1.1] [Project Fi] LVY48C, Stock, Rooted, de-crypted kernel Check out the 2nd post for some mods as well!
Ingenium13 said:
For what it's worth, it doesn't work for Sprint. It gets stuck saying no SIM and the phone app force closes. I reverted and everything was fine again.
Sent from my Nexus 6
Click to expand...
Click to collapse
Hmm. Maybe I wont. I'm on VZW and I wonder if it'll crash the things if I do.
Thoughts?
Related
So I just Installed PA 3.99.1-RC1-20130914 and PA_GApps-20131018
It's strange to see that there was no Google Chrome by default along with the following issues :
- Camera is not working - on opening the app it simply says Can't connect to camera.
- There is no signal and on searching for networks, it asks for sim.
- Also the PA_OTA app says unable to check for updates, though I'm able to download apps.
Did you come from 4.2? Did you flash the new radio?
Chromium_ said:
Did you come from 4.2? Did you flash the new radio?
Click to expand...
Click to collapse
Coming from 4.3 . I hadn't flashed it earlier, did just now, Doing factory reset and reinstalling PA and GApps. Hope it helps.
Got stock image and flashed it to make sure everything is latest, flashed PA again but same issues.
Can it be because I'm using 3.99.1 ?
Back to stock for now. Need the SIM to work atleast.
anshul93 said:
Got stock image and flashed it to make sure everything is latest, flashed PA again but same issues.
Can it be because I'm using 3.99.1 ?
Back to stock for now. Need the SIM to work atleast.
Click to expand...
Click to collapse
May this Thread could help you:
http://forum.xda-developers.com/showthread.php?t=2491848
Could be a similar problem.
Hello fellow N10 owners,
Unfortunately, the OTA KitKat update for my N10 is still not available for download.
I have reset the Google Frameworks app, but that did not work.
I am running Android Version 4.3 build JWR66Y stock rooted.
If you guys have any suggestions I would really appreciate it. Also, If you would know
how I could keep root after the update that would be awesome!
Thank you
BosCeltics18 said:
Hello fellow N10 owners,
Unfortunately, the OTA KitKat update for my N10 is still not available for download.
I have reset the Google Frameworks app, but that did not work.
I am running Android Version 4.3 build JWR66Y stock rooted.
If you guys have any suggestions I would really appreciate it. Also, If you would know
how I could keep root after the update that would be awesome!
Thank you
Click to expand...
Click to collapse
Mine is still not showing either......kinda depressing.
oakbowery said:
Mine is still not showing either......kinda depressing.
Click to expand...
Click to collapse
USA?
BosCeltics18 said:
USA?
Click to expand...
Click to collapse
Yes, Mississippi to be exact. I've hit the check now button 1,000 times I think.
oakbowery said:
Yes, Mississippi to be exact. I've hit the check now button 1,000 times I think.
Click to expand...
Click to collapse
hahaha! same
Glad to know I'm not the only one. I was beginning to wonder if my tablet was screwed or something. I have a nexus 7 also and it has yet to get an OTA update either.
I from malaysia and also don't get any update message yet : \
Sent from my Nexus 10 using XDA Premium 4 mobile app
Perhaps Google is waiting for Kitkat to be released on the new Nexus 10 before updatring the original Nexus 10.
There is no new Google 10 and seriously once you get KitKat on your tablet you'll wish you hadn't, the OS is like a giant phone and isn't geared up for tablets.
Sent from my Nexus 10 using Tapatalk 4
BackDaws said:
There is no new Google 10 and seriously once you get KitKat on your tablet you'll wish you hadn't, the OS is like a giant phone and isn't geared up for tablets.
Sent from my Nexus 10 using Tapatalk 4
Click to expand...
Click to collapse
I disagree. With the exception of the PhoneUI settings screen it's exactly the same thing we had before with much improved performance and reliability. I'm so glad to get rid of 4.3.. Nothing but problems.
Maybe it's been pulled.
Sent from my Nexus 10 using xda app-developers app
Use Adb to sideload the ota zip if you do not want to wait
And I think KitKat is great on the n10, especially with the new launcher installed
Sent from my Nexus 5 using Tapatalk
I'm still waiting too. I'm in London, UK.
Sent from my Nexus 10 using Tapatalk 4
The full image is available on the Nexus factory images site. If you can't wait for the OTA, just download and flash that. Just remember to edit the batch file so you don't wipe everything. Here is the link.
https://developers.google.com/android/nexus/images?csw=1#mantarayjwr66y
Taking advantage of the topic, I'm from Brazil and me has not yet come to update my tablet version is also JWR66Y rooted, I need to get the root to update via OTA? Because I remember the last update to 4.3, when restarted I had problem with the boot image and had to use a tool to change the boot image
I waited, and waited, but gave up a couple nights ago. Seems to me, it should be like a voting system. The more manual update checks you do, the sooner you get it versus those that don't manually check. Those that don't realize the update is even or won't miss it for another few days.
Editing the -w out of the batch file was troublesome for me. The flag would complete and the tablet would reboot, but it would then hang on the nexus boot screen. Tried twice, but waiting a half an hour each time, I deemed it failure. Unexpected too since I had done a full wipe, factory fresh 4.3 the week prior.
Running the unedited batch with wipe went without a hitch. No biggie since I had done it recently.
--OctOS Powered VZW GS4 Dev Edition
Bait-Fish said:
I waited, and waited, but gave up a couple nights ago. Seems to me, it should be like a voting system. The more manual update checks you do, the sooner you get it versus those that don't manually check. Those that don't realize the update is even or won't miss it for another few days.
Editing the -w out of the batch file was troublesome for me. The flag would complete and the tablet would reboot, but it would then hang on the nexus boot screen. Tried twice, but waiting a half an hour each time, I deemed it failure. Unexpected too since I had done a full wipe, factory fresh 4.3 the week prior.
Running the unedited batch with wipe went without a hitch. No biggie since I had done it recently.
--OctOS Powered VZW GS4 Dev Edition
Click to expand...
Click to collapse
Yeah, I updated mine with the factory image several days ago...I decided to go ahead and let it do the full wipe since I was reading that folks were having issues after removing the "-w" flag. Full wipe is probably the way to go anyway if want to avoid bugs.
For anyone interested who hasn't done this before, I found the instructions here to be quite helpful:
http://www.androidpolice.com/2013/1...riants-of-nexus-7-2012-and-2013-and-nexus-10/
can i keep root with 4.4 OTA
Alright guys looks like I finally got the 4.4 OTA.
Anyone know how I can keep root???
Flash SuperSU from custom recovery. SuperSU v1.69 worked for me. The latest is 1.75.
--OctOS Powered VZW GS4 Dev Edition
Worked thanks bud
The camera won't connect anymore, Wi-Fi won't turn on and the SD card wont mount. How did this get approved by google??
Edit:
To get the OTA to work properly and flash the correct kernal, your CID must be changed to GOOGL001. If you have the GPE device, you don't need to do anything, but if you have a converted GPE then you must change your CID if you want OTA's. This was not made clear in the RUU thread, it was mentioned that changing your CID was optional if you had one of the listed CID's, but it is not optional, but a requirement if you want the OTA's to work.
Everyone that has changed there CID's reflashed the OTA and everything flashed fine, whereas anybody that had not modified there CID had the problem with the kernal.
Psosmith82 said:
The camera won't connect anymore, Wi-Fi won't turn on and the SD card wont mount. How did this get approved by google??
Click to expand...
Click to collapse
maybe you had a bad download?
HRodMusic said:
maybe you had a bad download?
Click to expand...
Click to collapse
I used the download linked from the discussion thread. Put on phone storage, rebooted into recovery and applied the update from phone storage.
Same results with OTA.
Sent from space.
Psosmith82 said:
I used the download linked from the discussion thread. Put on phone storage, rebooted into recovery and applied the update from phone storage.
Click to expand...
Click to collapse
Checked the MD5 before?
Extremer2903 said:
Checked the MD5 before?
Click to expand...
Click to collapse
Used the OTA provided by graffixnyc
Extremer2903 said:
Checked the MD5 before?
Click to expand...
Click to collapse
The signature verification wouldn't apply the update if it saw mismatches.
Archon810 said:
The signature verification wouldn't apply the update if it saw mismatches.
Click to expand...
Click to collapse
Odd.. I had no problems using the OTA zip.. Did you guys try wiping data?
graffixnyc said:
Odd.. I had no problems using the OTA zip.. Did you guys try wiping data?
Click to expand...
Click to collapse
I tried wiping data, still had the same problem. I am reflashing the RUU and will try the ota again. If it doesn't work after the 2nd try, i will just wait for google to send the OTA to me. Wiping data sucks, have to redo everything
Psosmith82 said:
The camera won't connect anymore, Wi-Fi won't turn on and the SD card wont mount. How did this get approved by google??
Click to expand...
Click to collapse
I wonder if this is also being experienced by any other users or if this is specific to your software config and/or some glitch while writing the firmware. I assume you haven't yet tried wiping your /data partition, right?
willverduzco said:
I wonder if this is also being experienced by any other users or if this is specific to your software config and/or some glitch while writing the firmware. I assume you haven't yet tried wiping your /data partition, right?
Click to expand...
Click to collapse
I wiped data and still had problems. I'm working on starting over right now
Then problem should be wiped/not wiped, I think. Anyway, trying with this error stuff is always an excited challenge with me, try to deal with it like that to reduce percentage of throwing your devices away .
Also you need to be FULLY stock.. that includes the stock kernel. If you are running a custom kernel some kernels flash libs and modules. EVERYTHING NEEDS TO BE STOCK
graffixnyc said:
Also you need to be FULLY stock.. that includes the stock kernel. If you are running a custom kernel some kernels flash libs and modules. EVERYTHING NEEDS TO BE STOCK
Click to expand...
Click to collapse
Mine is fully stock. I have an unlocked HTC one, and i flashed the GPE conversion RUU. Does the CID need to be changed to the Google CID
Psosmith82 said:
Mine is fully stock. I have an unlocked HTC one, and i flashed the GPE conversion RUU. Does the CID need to be changed to the Google CID
Click to expand...
Click to collapse
that's a really good question Psosmith
Only thing I can think of on my example is I had 'CF.lumen' installed... Other than that, I had (your) completely stock GPE conversion.
Troubleshooting...
Sent from space.
Is the problem from the update zip or ota+
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Android The Greek said:
Is the problem from the update zip or ota+
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I figured out the problem. I flashed the new RUU that graffix posted with 4.4.3. The Kernal in the OTA is not updating like it should, it stays on the kernal that was made in March. The new Kernal has a date of Thursday May 22nd. So for whatever reason, the OTA is not flashing the new Kernal, which is why all those things were broken. If you use the RUU update, it will flash the new kernal, and everything works as it should.
You'll know right off the bat at first boot. With the OTA, the boot animation hangs and it hangs on the home screen. With the RUU flash, everything is buttery smooth.
Something tells me this problem is occurring for people who actually have a retail M8 that they dirty-flashed using a GPE RUU.
Does anyone with an honest-to-God GPE that was purchased from Google have this problem? If so, this is huge.
Android The Greek said:
Is the problem from the update zip or ota+
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
The update worked fine on my device and I used it for the conversion RUU. odd.. I used that very same OTA file. very odd...
I was on Santod040's Perfume Port 1.96.617.20 8.0_g CL801953 release-keys with the 1.85.605.8 firmware. Backed up everything in TWRP. Downloaded LeeDroids latest stable version then formatted my SD card in TWRP. Then installed LeeDroid unencrypted with MM firmware. Had no data, so i then restored my backup. to Perfume and now i get no data still.
Prefered Network is LTE/CDMA
APN is set to Verizon Internet
Not sure what else it could be
fyristus said:
I was on Santod040's Perfume Port 1.96.617.20 8.0_g CL801953 release-keys with the 1.85.605.8 firmware. Backed up everything in TWRP. Downloaded LeeDroids latest stable version then formatted my SD card in TWRP. Then installed LeeDroid unencrypted with MM firmware. Had no data, so i then restored my backup. to Perfume and now i get no data still.
Prefered Network is LTE/CDMA
APN is set to Verizon Internet
Not sure what else it could be
Click to expand...
Click to collapse
just tried flashing the 1.85.605.8 radio.... still nothing....
try setting it to global.
wiping modems might work as well but not sure, tbh.
i had to wipe mine today as i was stuck on 3g after playing with N ROMs
andybones said:
try setting it to global.
wiping modems might work as well but not sure, tbh.
i had to wipe mine today as i was stuck on 3g after playing with N ROMs
Click to expand...
Click to collapse
Tried Global and I wiped the radio then reflashed new radio and latest MM firmware.
The weird thing that worked was re formatted my SD card again then installed LeeDroids MM Rom Encyrpted. and then i got data back. Re formatted SD then installed Nougat switched to global and now i'm golden.
Thanks for suggestions though
Where did you find leedroids nougat ROM? I'm not seeing it in the ROM forum?
sgtslaughter64 said:
Where did you find leedroids nougat ROM? I'm not seeing it in the ROM forum?
Click to expand...
Click to collapse
http://www.leedroid.co.uk/Nightly
andybones said:
try setting it to global.
wiping modems might work as well but not sure, tbh.
i had to wipe mine today as i was stuck on 3g after playing with N ROMs
Click to expand...
Click to collapse
Make sure you still have volte/Wi-Fi calling....my sim borked doing the same thing
aer0zer0 said:
Make sure you still have volte/Wi-Fi calling....my sim borked doing the same thing
Click to expand...
Click to collapse
Appreciate this heads up!
Thought I booked it, but luckily didn't.
MM firmware. Multirom.
stock VZW MM ROM, AOKP MM ROM and Leedroid N ROM. All working great, just no VoLTE or Wi-Fi calling on N ROM.
andybones said:
Appreciate this heads up!
Thought I booked it, but luckily didn't.
MM firmware. Multirom.
stock VZW MM ROM, AOKP MM ROM and Leedroid N ROM. All working great, just no VoLTE or Wi-Fi calling on N ROM.
Click to expand...
Click to collapse
yea, i wiped radios, ruu'd.. all of the things. I couldnt get any advanced service back, new sim, ruu, radio wipe and i was good to go. My thought on it is, if people want to switch CID, install stock nougat, turn advanced calling off prior, i think it will make life easier in the long run
aer0zer0 said:
yea, i wiped radios, ruu'd.. all of the things. I couldnt get any advanced service back, new sim, ruu, radio wipe and i was good to go. My thought on it is, if people want to switch CID, install stock nougat, turn advanced calling off prior, i think it will make life easier in the long run
Click to expand...
Click to collapse
Good thinking. ATM, it may be worth the trouble (depending on how long Verizon will be :laugh since the only thing that really are giving up is HD Calling, and I haven't personally confirmed that I have it working on my current setup anyway. Honestly though, I am very happy where I am right now, N is running great and a reboot brings my to stock ROM if in a quick pinch thanks to multirom (how is this the first device I've used this on:silly
andybones said:
try setting it to global.
wiping modems might work as well but not sure, tbh.
i had to wipe mine today as i was stuck on 3g after playing with N ROMs
Click to expand...
Click to collapse
how do I accomplish wiping modems please
http://forum.xda-developers.com/showpost.php?p=68787163&postcount=1057
Read the posts from @aer0zer0 about turning off advanced calling, page 1.
Hey guys,
Android 7.1.1 factory image for shamu is live now :laugh:
https://dl.google.com/dl/android/aosp/shamu-n6f26q-factory-460b565b.zip
My Internet sucks atm...
Is there a new bootloader and/or radio included in this release?
Dopamin3 said:
My Internet sucks atm...
Is there a new bootloader and/or radio included in this release?
Click to expand...
Click to collapse
Same bootloader, but a new radio
ADB sifeloaded the OTA update and lost night mode.
Not getting it back with night mode enabler. But 7.1.1 wohoo!
Boot image is the same? So basically we can just flash the system, radio. If we are on 7.0?
I would reflash, what is supposed to be different here?
:good:
:fingers-crossed:
If we don't want to lose data. Or encrypt the phone in the past I just flashed the system IMG abf the radio
I have not flashed yet. I will report back tomorrow when i flash it.
I'm on NItrogen 7.1.1 will this new update give me anything different from the obvious basics and Nitrogen ROM can't? I'm just wondering if I should bother flashing.
The only thing you may want to flash is the new radio. Otherwise, wait for NitrogenOS to be updated rather than installing a stock ROM, as you'd gain nothing from installing the stock ROM.
Some issues. On ATT USA. Flashed stock 7.1.1. When making calls the audio keeps dropping in and out. Almost as if I don't have a good signal. But my signal bars are almost full LTE. I even tried changing from LTE to 3G only. same call audio issues. Also when I call my voicemail, it doesn't recognize my voicemail PIN!!!!!!!
Flashed back to stock 7.0 and everything works properly again. Call audio is good and voicemail pin is recognized.
Any ideas?
Question for people who have flashed 7.1.1 already -- did you also get the Support tab in Settings? I wonder why did they add it, considering the phone is now obsolete.
astaccz said:
Some issues. On ATT USA. Flashed stock 7.1.1. When making calls the audio keeps dropping in and out. Almost as if I don't have a good signal. But my signal bars are almost full LTE. I even tried changing from LTE to 3G only. same call audio issues. Also when I call my voicemail, it doesn't recognize my voicemail PIN!!!!!!!
Flashed back to stock 7.0 and everything works properly again. Call audio is good and voicemail pin is recognized.
Any ideas?
Click to expand...
Click to collapse
I'm on cricket (which is ATT), flashed the full 7.1.1 rom from the december 7.0 version. No problems so far with calls.
---------- Post added at 02:53 AM ---------- Previous post was at 02:53 AM ----------
stangri said:
Question for people who have flashed 7.1.1 already -- did you also get the Support tab in Settings? I wonder why did they add it, considering the phone is now obsolete.
Click to expand...
Click to collapse
Yes. I got the support tab in Settings.
Yeah it's live! Now we could have a real taste of nougat @ Nexus 6
I have a question, if you are going to flash this with fastboot , do you still need a modified boot image to avoid encryption?
I haven't used fastboot in a while ,any help would be appreciated since I don't want to encrypt my phone
sgloki77 said:
I have a question, if you are going to flash this with fastboot , do you still need a modified boot image to avoid encryption?
I haven't used fastboot in a while ,any help would be appreciated since I don't want to encrypt my phone
Click to expand...
Click to collapse
I'm coming from a long time back (HTC rezound). I had an M8, moved to nexus 6 (1.5 years ago when Best Buy had them on sale) and regularly read the forums. It seems that encryption is always an issue with the stock roms, and any stock will overwrite what you have. I personally don't have a problem with encryption on the N6.
Strephon Alkhalikoi said:
The only thing you may want to flash is the new radio. Otherwise, wait for NitrogenOS to be updated rather than installing a stock ROM, as you'd gain nothing from installing the stock ROM.
Click to expand...
Click to collapse
You're right I think I'd rather to wait for Nitrogen update.
cheers
sgloki77 said:
I have a question, if you are going to flash this with fastboot , do you still need a modified boot image to avoid encryption?
I haven't used fastboot in a while ,any help would be appreciated since I don't want to encrypt my phone
Click to expand...
Click to collapse
Just download the no encryption zip after the ROM that's her in the n6 forums and you won't encrypt
I've flashed it and seems to work apart from this... I added in the pixel 3 launcher into system and the apps shortcuts were blank. I rebooted and now the app shortcuts have gone. Any ideas?
What the advantage of the new Radio?