My friends galaxy S5 is looping into recovery after trying to install a custom rom. We have tried "wipe data/factory reset," and "wipe cache partition" but no luck. We have also tried flashing several stock firmwares through odin, but they all fail. His firmware was G900VVRU2BOE1, and from what I can tell you can't downgrade from that version. So what I think what we need to do is flash that stock firmware, and I can't find the .tar.md5 for that version, only the fireflash version(which he can't use since he has no way of getting fireflash).
Fixed it: Used this tool to convert the .img files for boot and recovery to .tar.md5 and then flashed them.
andyspam said:
Fixed it: Used this tool to convert the .img files for boot and recovery to .tar.md5 and then flashed them.
Click to expand...
Click to collapse
hey how did you exactly used this tool to fix your friends phone? Have the same problem.
galaxy S5 sm-g900v firmware problem
hey man mine do the same , SM-G900V its a samsung from verizon, i just bought it because i thought it was a software problem,
it keeps rebooting and on the startup screen appears a padlock and it say "COSTUM"
sometimes it keeps a few minutes on, somtimes its frozen and restart,
This is crazy, right now i live in the dominican republik, and i dont know if i must send it to verizon
Related
So I've been running a rooted Note 3 for a while. When the Note 3 Kitkat update came out, I updated it via Odin as OTA update was not available since I was rooted.
All the posts I read had mentioned that updating to 4.4.2 from 4.3 would erase all my data but after updating via odin all my data was in place. I had only lost root which I rooted again though CF Auto Root.
The problem now is that when I try to install CWM (via Odin) or TWRP (via Goo or Odin), it goes through the installation but then the phone goes into a boot loop of sorts..It's NOT the normal boot loop which gets stuck on the Samsung logo.
What happens is that the phone vibrates twice (with a 1 sec interval in between), then the Samsung Note 3 N-9005 screen appears with "Booting Recovery..." on the top left and within a sec it goes blank and then back to 2 vibrates and the screen come on to show Samsung Note 3 N-9005.
The only way I found to fix this was a battery pull and then turning on the device holding the power, home and down vol key to boot into recovery and then flashing CF Auto Root again.
I don't know why am I not able to install any of these recoveries. I've made sure I try to install the latest versions of them which are Kitkat compatible.
Anyone else with this problem or a solution?
Can a Cache and data wipe fix this? But the problem again being I won't be able to backup my ROM since i can't get these recoveries to install!
There is a script in official firmware that checks for official recovery and if it finds a custom one it tries to overwrite with official one. If i remember correct it's called install-recovery. sh
PhilZ recovery handles it automatically.
It's impossibe to flash anything other than the leaked 4.4.2 stock because you flashed your bootloader to kitkat, no you MUST stay on sammy 4.4.2 till the devs found a solution for this. Thats why you have to read carefully be4 you flash.
silentvisitor said:
There is a script in official firmware that checks for official recovery and if it finds a custom one it tries to overwrite with official one. If i remember correct it's called install-recovery. sh
PhilZ recovery handles it automatically.
Click to expand...
Click to collapse
No luck!
I tried PhilZ recovery from the below link.
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/hltexx
What are my other options?
sid8907 said:
No luck!
I tried PhilZ recovery from the below link.
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/hltexx
What are my other options?
Click to expand...
Click to collapse
This one seems to be the only one working with 4.4.2 right now.
Possible solution
The way I can suggest is to create a little update.zip file with little updater-script to remove install-recovery.sh file from device (just one line needed).
Ok, I found a zip which I am attaching below. You(or anyone) may review the script before flashing.
Place this on your external (or internal) sdcard.
In ODIN don't check Auto reboot
Flash Recovery. Remove phone when it says PASS.
Remove battery. Start in Recovery mode by pressing buttons.
You should now be in new Recovery.
Flash that zip file.
Reboot.
You should be good.
The Auto Reboot for some reason is faded out. Tried different versions of Odin and also tried to open it with the phone connected/disconnected.
I am out of ideas.
I would suggest you to wait for someone to come up with working solution. Being too adventurous with ODIN could brick your device.
sid8907 said:
The Auto Reboot for some reason is faded out. Tried different versions of Odin and also tried to open it with the phone connected/disconnected.
Click to expand...
Click to collapse
Clear out all your ODIN caches etc, delete all files and keep 1.85.
Flash this (only working recovery on 4.4.2) via PDA in ODIN, If it doesn't reboot auto after saying PASS or RESET.. just turn phone off, reboot into recovery and it'll be fine.
EDIT: Just re-read, Re flash your Stock 4.4.2 (Use XEO not the leaked one!) and then start again
Thanks!
Maybe a little off topic, but is there a way to install CM11 on Stock 4.4.2 on the Note 3?
I've been reading Samsung is out with a new bootloader so there is no way round this?
radicalisto said:
Clear out all your ODIN caches etc, delete all files and keep 1.85.
Flash this (only working recovery on 4.4.2) via PDA in ODIN, If it doesn't reboot auto after saying PASS or RESET.. just turn phone off, reboot into recovery and it'll be fine.
EDIT: Just re-read, Re flash your Stock 4.4.2 (Use XEO not the leaked one!) and then start again
Click to expand...
Click to collapse
Thanks!!
sid8907 said:
Thanks!
Maybe a little off topic, but is there a way to install CM11 on Stock 4.4.2 on the Note 3?
I've been reading Samsung is out with a new bootloader so there is no way round this?
Click to expand...
Click to collapse
You may have to do a little reading but I believe CM11 is now working on the KK bootloader...
sid8907 said:
So I've been running a rooted Note 3 for a while. When the Note 3 Kitkat update came out, I updated it via Odin as OTA update was not available since I was rooted.
All the posts I read had mentioned that updating to 4.4.2 from 4.3 would erase all my data but after updating via odin all my data was in place. I had only lost root which I rooted again though CF Auto Root.
The problem now is that when I try to install CWM (via Odin) or TWRP (via Goo or Odin), it goes through the installation but then the phone goes into a boot loop of sorts..It's NOT the normal boot loop which gets stuck on the Samsung logo.
What happens is that the phone vibrates twice (with a 1 sec interval in between), then the Samsung Note 3 N-9005 screen appears with "Booting Recovery..." on the top left and within a sec it goes blank and then back to 2 vibrates and the screen come on to show Samsung Note 3 N-9005.
The only way I found to fix this was a battery pull and then turning on the device holding the power, home and down vol key to boot into recovery and then flashing CF Auto Root again.
I don't know why am I not able to install any of these recoveries. I've made sure I try to install the latest versions of them which are Kitkat compatible.
Anyone else with this problem or a solution?
Can a Cache and data wipe fix this? But the problem again being I won't be able to backup my ROM since i can't get these recoveries to install!
Click to expand...
Click to collapse
here's the link for twrp for ya'll http://forum.xda-developers.com/showpost.php?p=50333147&postcount=398
sid8907 said:
So I've been running a rooted Note 3 for a while. When the Note 3 Kitkat update came out, I updated it via Odin as OTA update was not available since I was rooted.
All the posts I read had mentioned that updating to 4.4.2 from 4.3 would erase all my data but after updating via odin all my data was in place. I had only lost root which I rooted again though CF Auto Root.
The problem now is that when I try to install CWM (via Odin) or TWRP (via Goo or Odin), it goes through the installation but then the phone goes into a boot loop of sorts..It's NOT the normal boot loop which gets stuck on the Samsung logo.
What happens is that the phone vibrates twice (with a 1 sec interval in between), then the Samsung Note 3 N-9005 screen appears with "Booting Recovery..." on the top left and within a sec it goes blank and then back to 2 vibrates and the screen come on to show Samsung Note 3 N-9005.
The only way I found to fix this was a battery pull and then turning on the device holding the power, home and down vol key to boot into recovery and then flashing CF Auto Root again.
I don't know why am I not able to install any of these recoveries. I've made sure I try to install the latest versions of them which are Kitkat compatible.
Anyone else with this problem or a solution?
Can a Cache and data wipe fix this? But the problem again being I won't be able to backup my ROM since i can't get these recoveries to install!
Click to expand...
Click to collapse
jp.26 said:
here's the link for twrp for ya'll http://forum.xda-developers.com/showpost.php?p=50333147&postcount=398
Click to expand...
Click to collapse
so.... yeah i just updated my bootloader to 4.4.2 and this drove me literally insane. ive been working on it for 4 hours now. i encountered so many problems with installing the bootloader. exact same problem as SID8907. i gotta tell you tho.... you worked some magic my friend. i tried almost everything. then i came across your link. i was like why not? so i flashed the img in odin..... anddddd :drumroll pleaseeeeee:: IT WORKED. ahhh....... so much frustration and the problem is solved!!! thank you so much JP.26 :good::laugh:
is there any word on how to fix this been looking for hours tmobile note beast dont want to put any roots down on my phone before i find a way to flash cm or a non bloated note rom would be nice.
I'll that I've managed is to root and flash twrp I found a way to turn cwm recovery into a tar file and flash through odin. But i just get into a boot loop with cwm due to the boot loader I presume but tarp works fine I just can't flash cm11. I get boot loop every time
Sent from my SM-N900T using XDA Premium 4 mobile app
im sorry but im confused here... does this all simply mean that there is not yet a working cwm for 4.4.2 yet? and that while we can root, there is no working recovery for this version?
I'm not sure myself tarp works but I can't flash cm11
Sent from my SM-N900T using Tapatalk
Phillz cwm Dev edition I think that's the name works its a themed touch cwm. This works great but still can't flash cm so gayyyy
Sent from my SM-N900T using Tapatalk
I was wondering what happened to the cmw too.
The modded cmw by Chenglu is the only one working that I know of.
Link to thread: http://forum.xda-developers.com/showthread.php?t=2454079
i installed safe strap and got gold finger rom working now im locked out when i try to boot in recovery it says firmware upgrade encountered an issue. please select recovery mode in kies and try again i have download mode no recovery what can i do to fix stock recovery for samsung galaxy s4 can it be fixed i tried flashing with odin the stock recovery that fixed it last time it fails when it get to the last boot check
There is no real use for the stock recovery. What are you really trying to achieve?
jmjoyas said:
There is no real use for the stock recovery. What are you really trying to achieve?
Click to expand...
Click to collapse
i installed safe strap and sucessfully installed gold finger but installed *root* recovery tools app in playstore and flashed over twrp well that locked my original recovery and has messed everything up where i cant load anything but download mode rom is not working just download mode =,(
update i reflash the sgh-i337 .pit file and gain access to stock recovery but when i try to flash another stock rom fails and i have to reflash the .pit file when it loads up it shows a att logo that goes to a weird image and freezes is it hard bricked
update
fixed the phone slot was clicked and not pda thanks for the help i figured it out and im glad i did omg i was almost in tears =)) awsome work xda
You needed the pit file because of the re-partition option ticked in Odin.
Hi All, just need a huge help here, a friend of mine has been using a N9005 which was auto restarting, she went online and downloaded this firmware...N900AUCUEOC1_N900AATTEOC1_N900AUCUEOC1_ HOME.tar.md5....2.5GB in size...and flashed it, but the phone is stuck in boot loop even after recovery wiping data and cache, the phone can boot into download mode and is detected by odin, but re flashing the firmware always fails and always boot loops on searching that firmware on google it belongs to the AT&T note 3.....is there a solution for this.....I know my way around flashing if am given instructions...please help
Look for instructions regarding soft brick, you'll just have to reflash via odin.
mjmbirige said:
Hi All, just need a huge help here, a friend of mine has been using a N9005 which was auto restarting, she went online and downloaded this firmware...N900AUCUEOC1_N900AATTEOC1_N900AUCUEOC1_ HOME.tar.md5....2.5GB in size...and flashed it, but the phone is stuck in boot loop even after recovery wiping data and cache, the phone can boot into download mode and is detected by odin, but re flashing the firmware always fails and always boot loops on searching that firmware on google it belongs to the AT&T note 3.....is there a solution for this.....I know my way around flashing if am given instructions...please help
Click to expand...
Click to collapse
Flashing a N900A firmware in one N9005 is SUPER WRONG WRONG WRONG. Give a look here select one firmware good for your device and flash it via ODIN.
Joku1981 said:
Flashing a N900A firmware in one N9005 is SUPER WRONG WRONG WRONG. Give a look here select one firmware good for your device and flash it via ODIN.
Click to expand...
Click to collapse
thank you for the reply, am downloading this one...N9005XXUGPOF3...from Nordic countries...will it remove the AT&T bootloader
My SM-G900M is stuck in a boot loop.
When this happened, I Tried to do a factory reset plus cleaning cache in recovery. However this didnot fix my problem so I decided to reflash using odin, so i download the official rom and installed it but again same issue happened. After so much research and headache I installed CWM and did a kalvic, factory reset + format system a few times then I reflashed it afterwards. This seemed to have made the boot loop even worse since I doesn't pass through samsung galaxy s5 powered by android logo. That where the boot loop happens.
So overall I have tried
Reflashing ROM about 5 or 6 times using odin
Flashing a custom recovery multiple times
Factory reset
Clean cache + kalvic
FORMAT system and boot
Pulling the battery out for about a trillion times
Current result:
An Expensive Paper Holder
Thanks
PD: it only works when is pluged in
PhyraxYT said:
My SM-G900M is stuck in a boot loop.
When this happened, I Tried to do a factory reset plus cleaning cache in recovery. However this didnot fix my problem so I decided to reflash using odin, so i download the official rom and installed it but again same issue happened. After so much research and headache I installed CWM and did a kalvic, factory reset + format system a few times then I reflashed it afterwards. This seemed to have made the boot loop even worse since I doesn't pass through samsung galaxy s5 powered by android logo. That where the boot loop happens.
So overall I have tried
Reflashing ROM about 5 or 6 times using odin
Flashing a custom recovery multiple times
Factory reset
Clean cache + kalvic
FORMAT system and boot
Pulling the battery out for about a trillion times
Current result:
An Expensive Paper Holder
Thanks
Click to expand...
Click to collapse
You must flash pit file in odin but must find pit file for ur device : http://www.theandroidsoul.com/download-samsung-galaxy-s5-pit-files-and-information-84379/ You have problems with partition map
it doesn't works, i think my phone is completely useless now
PhyraxYT said:
it doesn't works, i think my phone is completely useless now
Click to expand...
Click to collapse
Download the latest firmware , bootloader end pit file for repartion, put all together in odin end flash.
If you have Samsung logo ur device is not death
Petreion said:
Download the latest firmware , bootloader end pit file for reparation, put all together in odin end flash.
If you have Samsung logo ur device is not death
Click to expand...
Click to collapse
Just asking:
Can i use the verizon file to unlock the bootloader for my s5?
i guess the answer is no but ... can i?
PD: i'm not with verizon
PhyraxYT said:
Just asking:
Can i use the verizon file to unlock the bootloader for my s5?
i guess the answer is no but ... can i?
PD: i'm not with verizon
Click to expand...
Click to collapse
Forget that, i found another bootloader file and it just didn't work
Firmware: http://www.sammobile .com/firmwares/download/68245/G900MUBU1BPB2_G900MUWM1BPB3_COL/
BootLoader: http://forum.xda-developers .com/showpost.php?p=52210611
Pit: http://www.theandroidsoul .com/download-samsung-galaxy-s5-pit-files-and-information-84379/
PhyraxYT said:
Just asking:
Can i use the verizon file to unlock the bootloader for my s5?
i guess the answer is no but ... can i?
PD: i'm not with verizon
Click to expand...
Click to collapse
Verizon file FROM THE SAME MODEL YOU MEAN SM-G900M OR OTHER DEVICE MODEL??
Petreion said:
Verizon file FROM THE SAME MODEL YOU MEAN SM-G900M OR OTHER DEVICE MODEL??
Click to expand...
Click to collapse
Same model
PhyraxYT said:
Same model
Click to expand...
Click to collapse
You can flash files from same model device without problems but if ur fone was looked by imei end you want to unlock the device by changing the firmware your device will not be unlocked the only way is octopus box
What you try to do recover the device or unlock device??
Petreion said:
You can flash files from same model device without problems but if ur fone was looked by imei end you want to unlock the device by changing the firmware your device will not be unlocked the only way is octopus box
What you try to do recover the device or unlock device??
Click to expand...
Click to collapse
Recover It, it's just that i found that dile and i wasn't sure if it would work and it didn't worked, i flashed the pit file, the lastest firmware (5.0 not 6.0) and the bootloader and it keeps having the bootloop
Hi,
I have a rooted Samsung Galaxy S4, with stock firmware (5.0.1, I think...) and TWRP recovery v3. I tried to flash a file, which got the phone stuck in a boot loop, and when I tried to factory reset it, I somehow accidentally tapped the 'wipe system partition' check box, too. When I tried to boot the phone again, it was stuck on the 'Samsung Galaxy S4 GT-I9505' screen, with no advance to the boot animation.
I tried to flash the stock firmware on again, with an error: "Could not find 'META-INF/com/google/android/update-binary' in the zip file." Using my own knowledge, I've narrowed it down to two options: 1. Either the firmware zip is corrupt, but I have re-downloaded the zip a good five times, and 2. There's something else that also needs to be flashed to the system partition.
I really need some help. Is there anything to do before flashing the firmware zip, and if yes, what? And, is there a good, CONFIRMED WORKING link to a Samsung Galaxy S4 GT-I9505 Stock firmware (LTE, Android 5.0.1, United Kingdom, Vodafone)?
Thanks,
hamzabil11
Firmwares aren't flashed through the recovery, but with Odin.
Firmwares also come with a tar extension. So it should be firmeare.tar
You could flash a custom rom now, or you can go to sammobile.com and download the official firmware from there and flash it with Odin.
Remeber, it has to be a tar file. Sammobile compresses them to zips, so you just extract them to get the tar file.
hamzabil11 said:
Hi,
I have a rooted Samsung Galaxy S4, with stock firmware (5.0.1, I think...) and TWRP recovery v3. I tried to flash a file, which got the phone stuck in a boot loop, and when I tried to factory reset it, I somehow accidentally tapped the 'wipe system partition' check box, too. When I tried to boot the phone again, it was stuck on the 'Samsung Galaxy S4 GT-I9505' screen, with no advance to the boot animation.
I tried to flash the stock firmware on again, with an error: "Could not find 'META-INF/com/google/android/update-binary' in the zip file." Using my own knowledge, I've narrowed it down to two options: 1. Either the firmware zip is corrupt, but I have re-downloaded the zip a good five times, and 2. There's something else that also needs to be flashed to the system partition.
I really need some help. Is there anything to do before flashing the firmware zip, and if yes, what? And, is there a good, CONFIRMED WORKING link to a Samsung Galaxy S4 GT-I9505 Stock firmware (LTE, Android 5.0.1, United Kingdom, Vodafone)?
Thanks,
hamzabil11
Click to expand...
Click to collapse
It appears that you're phone is soft-brick. You need to flash the factory stock firmware.
You can also find all the factory stock firmware for lollipop i-9505 here.
It's not soft-bricked. He just needs to flash a rom. Any rom, either custom or official, should get the phone running again.
GDReaper said:
Firmwares aren't flashed through the recovery, but with Odin.
Firmwares also come with a tar extension. So it should be firmeare.tar
You could flash a custom rom now, or you can go to sammobile.com and download the official firmware from there and flash it with Odin.
Remeber, it has to be a tar file. Sammobile compresses them to zips, so you just extract them to get the tar file.
Click to expand...
Click to collapse
Thanks a lot, I wasn't aware of this. I thought that you could just use the recovery to flash a stock OS, just like a custom OS. Never thought of using ODIN. I will check sammobile for the firmware; I'd heard of it before, just never thought of using it.
I was aware about the .tar extension though, just the websites i used gave them in .zip format.
Thanks,
hamzabil11
hamzabil11 said:
Thanks a lot, I wasn't aware of this. I thought that you could just use the recovery to flash a stock OS, just like a custom OS. Never thought of using ODIN. I will check sammobile for the firmware; I'd heard of it before, just never thought of using it.
I was aware about the .tar extension though, just the websites i used gave them in .zip format.
Thanks,
hamzabil11
Click to expand...
Click to collapse
Sammobile has slow download speeds for non-premium users. So you might as well check the link suggested by sway8966.
GDReaper said:
Sammobile has slow download speeds for non-premium users. So you might as well check the link suggested by sway8966.
Click to expand...
Click to collapse
Yeah Ok, thanks. I found out about the slow download speeds the hard way.
I've already checked the link, and it looks all good. I will try from there.
One more related question: If I flash this stock firmware, will I need to re-root the phone, and re-install TWRP recovery? Not really a problem if ido, but I would like to know in advance so I can be prepared.
Thanks,
hamzabil11
hamzabil11 said:
Yeah Ok, thanks. I found out about the slow download speeds the hard way.
I've already checked the link, but it only seems to offer Android KitKat Firmware. Since this phone is likely to be used offline all the time, I may not have the time to update it to Lollipop.
I will check out other sites, too, though.
Thanks,
hamzabil11
Click to expand...
Click to collapse
SamFirm.