Boot loop in n910w8 - Galaxy Note 4 Q&A, Help & Troubleshooting

Hi everyone. I was trying to root my phone and install the philz_touch, I successfully did that and the booting finished the first time, then I flashed the philz_touch.tar file as well, then the recovery mode worked as well with the philz_touch UI etc. Then I wiped clean my data from the recovery mode so that I could install a new rom (cm-12.1-20150423-NIGHTLY-trltetmo), when I tried, the install game me an error (This package is for device: trltetmo; this device is trlte), and since then, the phone is stuck on the boot loop, any ideas how I can resolve this?

Related

Stuck in a boot loop and can't enter recovery mode

All my beloved XDA memebers, I need your help badly.
I screwed up. I'm on TruePureX 6.0 but updated Super SU through TWRP (Popped up a message; I learned later the mistake I made).
1. The phone got stuck at Android boot screen and won't start.
2. I then researched to find out I could flash this SuperSU 2.62 version to get the phone started but nothing happend .
3. I then researched to find out I should fash a clean version of TruePurXMM as SuperSU 2.62 was not working for me. I used this thread
4. But this thread said TWRP 3.0 is minimum so I flashed that from my TWRP 2.8.7
5. I can no longer boot into the TWRP recovery mode as I'm getting fail to start up error on the recovery , Error: Failed to start the kernel
6. I'm not able to connect the phone to PC as the phone is not going in recovery mode and its not going passed the android screen due to super SU upgrade.
I'd immensely appreciate your help as I love my moto X and XDA tweaks, tips.
sarveshsj said:
All my beloved XDA memebers, I need your help badly.
I screwed up. I'm on TruePureX 6.0 but updated Super SU through TWRP (Popped up a message; I learned later the mistake I made).
1. The phone got stuck at Android boot screen and won't start.
2. I then researched to find out I could flash this SuperSU 2.62 version to get the phone started but nothing happend .
3. I then researched to find out I should fash a clean version of TruePurXMM as SuperSU 2.62 was not working for me. I used this thread
4. But this thread said TWRP 3.0 is minimum so I flashed that from my TWRP 2.8.7
5. I can no longer boot into the TWRP recovery mode as I'm getting fail to start up error on the recovery , Error: Failed to start the kernel
6. I'm not able to connect the phone to PC as the phone is not going in recovery mode and its not going passed the android screen due to super SU upgrade.
I'd immensely appreciate your help as I love my moto X and XDA tweaks, tips.
Click to expand...
Click to collapse
It sounds like you flashed the recovery to the boot partition instead of recovery. I would suggest flashing back to stock with fastboot, if you can get there.
Im in the same situation. was on my phone, it started freezing. i power cycled the phone and plugged it in. phone stuck on boot animation for several minutes until i powered it down and tried to go to recovery to wipe caches. however the phone stayed on the recovery boot image as well. finally got the phone to boot past the boot animation but was just on a black screen for several minutes. i need serious help. im already downloading the revert back to stock files just in case...please help!
thank you!

A 510fd unable to boot into system

HI,
I have rooted and rebooted the device, but now i was unable to boot into system i was able to boot into recovery download mode.
so how can i solve this thing
Thanks

SM-T580 Softbricked, Currently on reboot loop, can't flash any stock firmware

Here's what happened:
1. flashed wrong twrp version for 8.1 oreo, used correct CF-auto root
- tablet booted to stock recovery screen a few times but i figured it was part of the process so I just rebooted
-ended up getting a failed identification verification
-i know the auto root worked because my warranty is void :silly:
2. reset my tablet from the failed verification screen
-eventually got myself to a blue erasing screen loop
-flashed twrp again and got myself to a point where booting into recovery resulted in glitchy lines
3. attempted to factory reset from reboot with adp
-not sure if it worked tbh
-also tried to reboot to recovery screen and that didn't really do anything
4. found and installed the proper version of twrp (3.2.3-4)
-now stuck in feedback loop that occasionally shows the twerp screen so i know something's right
-won't boot to recovery screen but will boot to download page
-doesn't show up in adp devices during this loop
-- have CONTINUOUSLY tried flashing firmware (I've tried 6.0, 7.0?, and 8.1) none of them have worked, sporting some variant of secure check fail (PIT, bootloader, or RADIO)
-- have tried the mod here but it fails after param.bin and i can't use it directly after auto root without rebooting because it gets stuck on setup connection
-- most likely not a hardware problem because i had this tablet for basically a day before i did this to myself
--OEM is unlocked, not that i could change it even if it wasn't
---is there anything that anyone would recommend trying before i take this to geek squad (who may not help me but i'm still going to try) or should i just cry myself to sleep over wasting $300 :crying::crying:
abstractartemis said:
Here's what happened:
1. flashed wrong twrp version for 8.1 oreo, used correct CF-auto root
- tablet booted to stock recovery screen a few times but i figured it was part of the process so I just rebooted
-ended up getting a failed identification verification
-i know the auto root worked because my warranty is void :silly:
2. reset my tablet from the failed verification screen
-eventually got myself to a blue erasing screen loop
-flashed twrp again and got myself to a point where booting into recovery resulted in glitchy lines
3. attempted to factory reset from reboot with adp
-not sure if it worked tbh
-also tried to reboot to recovery screen and that didn't really do anything
4. found and installed the proper version of twrp (3.2.3-4)
-now stuck in feedback loop that occasionally shows the twerp screen so i know something's right
-won't boot to recovery screen but will boot to download page
-doesn't show up in adp devices during this loop
-- have CONTINUOUSLY tried flashing firmware (I've tried 6.0, 7.0?, and 8.1) none of them have worked, sporting some variant of secure check fail (PIT, bootloader, or RADIO)
-- have tried the mod here but it fails after param.bin and i can't use it directly after auto root without rebooting because it gets stuck on setup connection
-- most likely not a hardware problem because i had this tablet for basically a day before i did this to myself
--OEM is unlocked, not that i could change it even if it wasn't
---is there anything that anyone would recommend trying before i take this to geek squad (who may not help me but i'm still going to try) or should i just cry myself to sleep over wasting $300 :crying::crying:
Click to expand...
Click to collapse
Flash twrp, FORMAT (not wipe) data, install Magisk.
Reboot.
ashyx said:
Flash twrp, FORMAT (not wipe) data, install Magisk.
Reboot.
Click to expand...
Click to collapse
So just keep flashing it until i can boot to twrp recovery basically?
abstractartemis said:
So just keep flashing it until i can boot to twrp recovery basically?
Click to expand...
Click to collapse
What's stopping you boot to Download mode?
ashyx said:
What's stopping you boot to Download mode?
Click to expand...
Click to collapse
I can boot to download mode but i can't boot to recovery mode after flashing twrp. When I try I just get stuck in a reboot loop, so I can't try to boot to recovery from adp either.
abstractartemis said:
I can boot to download mode but i can't boot to recovery mode after flashing twrp. When I try I just get stuck in a reboot loop, so I can't try to boot to recovery from adp either.
Click to expand...
Click to collapse
If you can flash twrp then not booting to twrp must be pilot error.
It MUST be done immediately after flashing in odin.

Little help stucked on OP logo at boot

Hello,
First to get this out of the way i have searched the topic and there were several "solutions" none worked for me.
How it started, I downloaded the latest LieneageOS update as always, set the phone to do it's thing, came back and the phone was stucked on OP log, tried a little reboot, nothing.
No access to recovery or fastboot.
computer wouldn't recognize device even after installing drivers, this guide helped me a little https://forums.oneplus.com/threads/...ck-guide-for-a-hard-bricked-oneplus-2.347607/
found tools got fastboot back and original recovery.
via fastboot attempted to installed TWRP
fastboot flash recovery twrp****.img
and then tried to boot into recovery
fastboot boot twrp****.img
Not able to boot into twrp
after all that my phone still stucked on the boot OP logo
any help would be greatly appreciated.
Anyone has any idea, sorry I have been scouring and reading everywhere, but I can't find a solution.
Thank you
So i have been trying many things and finally getting somewhere. I apologize for the long post, but i have been trying so many things to get this device back to speed.
So flashing TWRP newer version for some reason is not letting me boot into recovery.
I have flashed twrp-2.8.7.0 and i am able to boot into recovery, however when trying to install the ROM (LineageOS 16) i get error E3004.
Searching the web i find that the correction is to that error is to update TWRP, thus i have tried flashing
twrp-3.2.1-0 and twrp-3.1.1-0 and once installed i am not able to boot into recovery again.
I flashed 2.8.7.0 and i was able to get in, thus from inside TWRP i did an image install of twrp-3.1.1-0 and rebooted, recovery won't load. I proceeded to repeat this until i get a result.
I flashed twrp-3.0.2-0 and be able to boot. However still not able to install LOS.
Once i tried flashing twrp-3.0.2-1, recovery won't load.
For sake of argument i flashed twrp-3.0.2-0 and attempted a image install for twrp-3.0.2-1, but the system still won't boot to recovery.
I have completely formatted the phone.
I hope someone could give me a little advice . Thank you.

-PLEASE HELP- UNABLE TO FLASH TWRP OR ROOT

Hello
Sorry for my bad english
a few months ago, i decided to flash my first custom rom (One UI rom) and it worked fine
then i was testing a lot of other roms too until i tried lineage os 20
when i flashed lineage os 20, i decided to try another rom but i was stuck on the twrp logo screen. i tried methods of fixing it but none of them worked.
after trying a method of flashing twrp once again, it failed and i got stuck in a reboot loop and could only boot into download mode. so i booted into download mode and flashed a stock rom.
everything was working fine again until i wanted to try another custom rom. At first whenever i would flash twrp, they would always fail. but later i found the cause of that and fixed it. then, flashing twrp would always pass but my device would get stuck on a reboot loop once again and i had to flash stock rom again.
i tried rooting using auto root but it would show me a verification failed error and i had to reset my device. so now im stuck on a device which cannot flash twrp, nor can it be rooted. its been 1 month and i could not find a viable solution so any help would be extremely appreciated.
You have to just reflash your fastboot rom with fastboot mode unzip it and double click on flash_all.bat file or something like that
it is a samsung, there is no fastboot mode

Categories

Resources