Trying to downgrade verzion s5 - Verizon Galaxy S 5 Q&A, Help & Troubleshooting

I have a verzion s5 running android 5.0 G900VRU2BOE1 when i try to downgrade to android 4.4.4 using odin i get this error Any help would be greatly appreciated
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900VVRU1ANI2_G900VVZW1ANI2_G900VVRU1ANI2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> aboot.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

money123 said:
I have a verzion s5 running android 5.0 G900VRU2BOE1 when i try to downgrade using odin i get this error
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900VVRU1ANI2_G900VVZW1ANI2_G900VVRU1ANI2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> aboot.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any help would be greatly appreciated
Click to expand...
Click to collapse
Are you trying to downgrade to KitKat, if so I have a step by step instructions. Are you looking to root too?

liam2842 said:
Are you trying to downgrade to KitKat, if so I have a step by step instructions. Are you looking to root too?
Click to expand...
Click to collapse
Can you lead me to said instructions? as well as rooting. I hate lolipop

- reserved -
I will post help for everyone else when It lets me post links​

liam2842 said:
Are you trying to downgrade to KitKat, if so I have a step by step instructions. Are you looking to root too?
Click to expand...
Click to collapse
I am trying to downgrade from 5.0 to 4.4.4 so i can try and root the verzion s5

I've been told that if you've upgraded to boe1 then you can't down grade or so I've read
Sent from my SM-G900V using XDA Free mobile app

Related

Root keep on failing after update

ANYONE PLEASE HELP ME OUT HERE
I've just updated my Galaxy Note3 SM-N9005 via kies to Build number N9005XXUDMK2 and now I can't root it, It fails every time...
My version is N9005XXUDMJ7 and my build number is N9005XXUDMK2.
I don't know if it has something to do with it, but when I enter download node I see a gray line saying: "Write protection: Enabled".
Can anyone please tell me how can I gain root access again ?
I'm tring to flash this file: "CF-Auto-Root-hlte-hltexx-smn9005.tar.md5" with "Odin3 v3.09.exe"
which I found in this site: http://true-android.blogspot.co.il/2...note-3-sm.html
This is the log from odin:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> recovery.img
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
PLEASE PELASE HELP...
frliran said:
ANYONE PLEASE HELP ME OUT HERE
I've just updated my Galaxy Note3 SM-N9005 via kies to Build number N9005XXUDMK2 and now I can't root it, It fails every time...
My version is N9005XXUDMJ7 and my build number is N9005XXUDMK2.
I don't know if it has something to do with it, but when I enter download node I see a gray line saying: "Write protection: Enabled".
Can anyone please tell me how can I gain root access again ?
I'm tring to flash this file: "CF-Auto-Root-hlte-hltexx-smn9005.tar.md5" with "Odin3 v3.09.exe"
which I found in this site: http://true-android.blogspot.co.il/2...note-3-sm.html
This is the log from odin:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> recovery.img
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
PLEASE PELASE HELP...
Click to expand...
Click to collapse
Try this older version on odin.
Solved it (-:
hey_joe said:
Try this older version on odin.
Click to expand...
Click to collapse
On the settings page under security..make sure you have reactivation lock uncheck...
Than try again..that's usually the problem

[Q] Could Not Do Normal Boot *Odin Mode* (ATT I337)

Hoping that someone can tell me what steps I've missed. Had previously attempted to root and then got several errors which then got me to the
*Odin Could Not Boot Normal*
Having done that I attempted to do a wipe. Here is what I did.
Downloaded firmware from Sammobile (MDL) is the baseband.
Went into download mode and attempted reload firmware.
Getting the following error from Odin when I try to load the firmware.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> aboot.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
At a lost. How do I resolve/fix this *Could not do normal boot*? Please help someone.
Are you sure you're phone is on mdl firmware? I'm guessing that's the problem.
I guess you flashed mdl on mf3 or later version. Or if your phone was already on mdl, you used the wrong Odin.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app

Help with my Samsung Galaxy Note 3 SM9005

Can anyone helpe me with following trouble? I have a SM-9005 International version.
I tried to flash lolipop 5.0 to my device via odin, I downloaded the Poland version N9005XXUGBOB6_N9005XEOGBOA4_XEO, and did as described in instruction. First it gave me this message "FIRMWARE UPGRADE ENCOUNTERED AN ISSUE", and then I tried via ODINN the reocvery mod.tar. Right now the screen gives me this message . please see attached picture.
UDC start
Volume size is too big 4620288<4718592
ODIN: Invalid ext4 image
and Odin messages:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENB4_N9005OXXENB1_N9005XXUENB1_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sbl1.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I don't know what to do. Please help.

Help (Bootloop SM-N910K)

Hello,
Can somebody help me with my SM-910K, i tried to root it using cf-auto-root but it didnt work. After that the phone reboot but it is only showing Note 4 logo and Olleg G. I tried to clear cache and wipe partition but still no luck. Can anyone please help? Thanks in advance
Go here http://galaxynote4root.com/note-4-stock-firmwares/ download the correct rom for your phone and reflash buddy. Reflash using Odin (I can provide this if its not included within the rom package)
fannyman said:
Hello,
Can somebody help me with my SM-910K, i tried to root it using cf-auto-root but it didnt work. After that the phone reboot but it is only showing Note 4 logo and Olleg G. I tried to clear cache and wipe partition but still no luck. Can anyone please help? Thanks in advance
Click to expand...
Click to collapse
just flash the latest rom at Sammobile via Odin and that will be fine..we have same model
luii03 said:
just flash the latest rom at Sammobile via Odin and that will be fine..we have same model
Click to expand...
Click to collapse
I tried flashing 4.4.4 but still no luck.
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910KKTU1ANJ1_N910KKTC1ANJ1_N910KKTU0ANJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
ill try to download 5.1.1 later
speedyjay said:
Go here http://galaxynote4root.com/note-4-stock-firmwares/ download the correct rom for your phone and reflash buddy. Reflash using Odin (I can provide this if its not included within the rom package)
Click to expand...
Click to collapse
I tried flashing 4.4.4 but still no luck.
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910KKTU1ANJ1_N910KKTC1ANJ1_N910KKTU0ANJ1_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)

Root SM-T337A Lollipop 5.1.1 or rollback to rootable Kitkat

I have an AT&T Tab 4 SM-T337A LT currently running Lollipop 5.1.1. The tablet runs fine but I am looking to root it to remove all of the Samsung and AT&T bloatware so it can run lean and mean. I have looked all over the net and have not been able to find any way to root 5.1.1 on a T337A. I am gathering that AT&T has locked down the bootloader making this a colossal pain in the ass.
I tried rolling back to Kitkat using ODIN but unfortunately get the following error:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T337AUCU1ANF4_T337AATT1ANF4_T337AUCU1ANF4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> aboot.mbn
<ID:0/007> NAND Write Start!!*
<ID:0/007> FAIL! (Auth)
<ID:0/007>*
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)​Again, my guess is on the AT&T bootloader wreaking havoc on any customization efforts.
Thanks in advance.
KingRoot.

Categories

Resources