[Q] "Unfortunatley, System UI has stopped" Removed ui by accident - Verizon Galaxy S 5 Q&A, Help & Troubleshooting

Hey Everyone, I just flashed the Extreme Syndicate L v5 (DEODEXED/THEME STARTED) rom last night on my verizon galaxy S5 and everything was working well until I made a mistake. I noticed that there were two battery icons so I force uninstalled 3minit... I did not know that this was also the ui. So now when the rom loads it keeps popping an error saying "Unfortunatley, System UI has stopped". I had safestrap installed before the flash and did a backup but now I only have access to Recovery and Download mode.
My question is, would it be safe to flash extreme syndicate using odin? Is there another way to just push the ui apk using android studio/cli? I've done a bunch of searching already but since I'm new to Android SDK I don't really know what I'm looking for and need some direction. I'm guessing I can't do a restore from my backed up files because safestrap was removed.
Any help or direction would be would be appreciated.
Thanks in advance

buro3 said:
Hey Everyone, I just flashed the Extreme Syndicate L v5 (DEODEXED/THEME STARTED) rom last night on my verizon galaxy S5 and everything was working well until I made a mistake. I noticed that there were two battery icons so I force uninstalled 3minit... I did not know that this was also the ui. So now when the rom loads it keeps popping an error saying "Unfortunatley, System UI has stopped". I had safestrap installed before the flash and did a backup but now I only have access to Recovery and Download mode.
My question is, would it be safe to flash extreme syndicate using odin? Is there another way to just push the ui apk using android studio/cli? I've done a bunch of searching already but since I'm new to Android SDK I don't really know what I'm looking for and need some direction. I'm guessing I can't do a restore from my backed up files because safestrap was removed.
Any help or direction would be would be appreciated.
Thanks in advance
Click to expand...
Click to collapse
I was able to access safestrap again after Reverting back to NK2 Kernal this issue is resolved.

Related

[Q] Newbie help- storage space-stuck

Hey there!
This is my first post and I am new to android rooting.
I have gotten my s4 into a jam in which I am stuck in Liquidsmooth with no access to the app store, no space, and perhaps most all of my contacts and everything wiped.
The problem started when I decided to take my phone which was rooted but had no ROMs yet and to back it up. I went into CWM recovery to backup and it failed because I did not have enough space. (probably from having a number of other backups). Anyways, I tried rebooting the phone and it failed due to the fact it probably tried to reboot the failed backup I had just performed? So then I tried to tackle the dilemma by installing TWRP instead because I figured it would get rid of CWM files that were taking up the space. I also flashed Liquidsmooth through Goomanager as well. When I tried to install LiquidSmooth and GApps in TWRP it failed again because I still did not have enough space or something. It just kept saying setupwizard and GApps were failing to initalize. However, when I install LiquidSmooth by itself it boots fine but with none of my contacts or previous apps (TI backup, Goo, TWRP, anything, etc...). Somewhere along the line I did a factory reset and format data in TWRP thinking it would free up space. It did not.
So now I am stuck with Liquidsmooth with no apps and no way to access apps w/o the Play Store as far as I know, with no contacts or anything. I have no idea what to do. Should I unroot or reroot my phone? If so, how?
Please Help
Thanks!
UPDATE
UPDATE: I really just want to unroot and reroot my sg4. Ive tried downloading the stock firmware for my phone (SCH-i545 4.2.2 verizon) so that I can use ODIN to reinstall the stock firmware, but whenever I try and go to unzip it I get an error saying the file is corrupt or invalid. Ive tried it multiple times and each time it takes around an hour to download. Any suggestions or other places I can get this file?
This is very frustrating. Any help is greatly appreciated.
crgarne said:
UPDATE: I really just want to unroot and reroot my sg4. Ive tried downloading the stock firmware for my phone (SCH-i545 4.2.2 verizon) so that I can use ODIN to reinstall the stock firmware, but whenever I try and go to unzip it I get an error saying the file is corrupt or invalid. Ive tried it multiple times and each time it takes around an hour to download. Any suggestions or other places I can get this file?
This is very frustrating. Any help is greatly appreciated.
Click to expand...
Click to collapse
Hi, you may get better help on the Galaxy S4 forum. This is for the S4 Active.
Many S4s...avoid an expensive paperweight
Thread moved

[Q] xposed installer causes SYSTEM UI error

hi
\i have tried installing the framework in order to use the Xposed Installer mods\ \
ALWAYS ALWAYS immediately after reboot i get the "Unfortunately SYSTEM UI has stopped" error ALWAYS
i have done full wipes data, cache, dalvik AND SYSTEM only to come back with the same error time and again
i have installed crash rom from galaxy s4 gt- i9500
again as i said completely wiped and yet the error is there
also and this is absolutely baffling - i downloaded several new cusoms roms for the galaxy s4 gt-i9500 *wanamlite, phoenix, cobra"
and for the life of me cobra would not start at all - again after full wipes - system, data, dalvik cache and with full battery - zim\
phoenix loaded once only to fully freeze after and no go and wanamlite loaded only to come up with nottach mods from lord knows where that made the system unstable and rebooted into oblivion
again i reload this rom as downloaded fresh from full wipes.
i am luckily using crash version 11 but unable to do the framework install
PLEASE PLEASE HELP, i am new and am not allowed to post into the developper's area to find an answer please please
thanks from the bottom of this 68 year old geek
exlaval said:
hi
\i have tried installing the framework in order to use the Xposed Installer mods\ \
ALWAYS ALWAYS immediately after reboot i get the "Unfortunately SYSTEM UI has stopped" error ALWAYS
i have done full wipes data, cache, dalvik AND SYSTEM only to come back with the same error time and again
i have installed crash rom from galaxy s4 gt- i9500
again as i said completely wiped and yet the error is there
also and this is absolutely baffling - i downloaded several new cusoms roms for the galaxy s4 gt-i9500 *wanamlite, phoenix, cobra"
and for the life of me cobra would not start at all - again after full wipes - system, data, dalvik cache and with full battery - zim\
phoenix loaded once only to fully freeze after and no go and wanamlite loaded only to come up with nottach mods from lord knows where that made the system unstable and rebooted into oblivion
again i reload this rom as downloaded fresh from full wipes.
i am luckily using crash version 11 but unable to do the framework install
PLEASE PLEASE HELP, i am new and am not allowed to post into the developper's area to find an answer please please
thanks from the bottom of this 68 year old geek
Click to expand...
Click to collapse
Why u dont try to install a STOCK ROM and try install Xposed?
stock rom
Joku1981 said:
Why u dont try to install a STOCK ROM and try install Xposed?
Click to expand...
Click to collapse
i don't like predigested food, and that's wiat a stock kernel is, it's bland, locked
also i want to keep on top of what are the developpers working on, it's interesting work and many times
these guys bring refinements to the OS that the majors don't bother with because they have to offer something with the LEAST
chances of goofups and yet many times their errors are 1000 times worse than the customs.
i like doing it, and i've been doing it since my last sony {i forget their last os} and then the first samsung galaxy note n7000
exlaval said:
i don't like predigested food, and that's wiat a stock kernel is, it's bland, locked
also i want to keep on top of what are the developpers working on, it's interesting work and many times
these guys bring refinements to the OS that the majors don't bother with because they have to offer something with the LEAST
chances of goofups and yet many times their errors are 1000 times worse than the customs.
i like doing it, and i've been doing it since my last sony {i forget their last os} and then the first samsung galaxy note n7000
Click to expand...
Click to collapse
It could be an incompatibility with the ROM you are using. Soe ROMs just do not like their core components messed with.
Try a different ROM. See if you get better results.
samsung galaxy s4 gt-i9500
Skipjacks said:
It could be an incompatibility with the ROM you are using. Soe ROMs just do not like their core components messed with.
Try a different ROM. See if you get better results.
Click to expand...
Click to collapse
as i said I ONLY AND ONLY TRY ROMS FROM THE THREAD OF THE GT-I9500 {THE INTERNATIONAL VERSION} NOT TTHE 95005 IN AVY VERSION. having said that, and i mentioned earlier i tried the wanamlite, the cobra and the phoenix and the crash. and for some reason only the crash was stable enough and yet i read a ton of replies of satisfied users so i come back why me- THANKS
system ui crash
exlaval said:
as i said I ONLY AND ONLY TRY ROMS FROM THE THREAD OF THE GT-I9500 {THE INTERNATIONAL VERSION} NOT TTHE 95005 IN AVY VERSION. having said that, and i mentioned earlier i tried the wanamlite, the cobra and the phoenix and the crash. and for some reason only the crash was stable enough and yet i read a ton of replies of satisfied users so i come back why me- THANKS
Click to expand...
Click to collapse
i've tried ALL CUSTOM ROMS everysingle one of them causes the same error, somehow the size of the screen grows TALLER and there is no space left for the status bar.
something causes the screen size to enlarge, is there a spec in the developer page that may cause this?
anyone, thanks
Are the errors coming after you installed the actual framework, or after you install a module?
framework causes system ui stop
Lennyz1988 said:
Are the errors coming after you installed the actual framework, or after you install a module?
Click to expand...
Click to collapse
i install the framework and then it asks for a reboot, during the reboot and at the restart i keep getting the "system ui has stopped" error, i can make it go away ONLY by removing the framework , i have a couple of aps that have a "restart UI" option even this doesn't work either.
at this moment, i am in the modules, page and at the top i have the message "the latest version of xposed currently not active, did you install the framework and reboot"? if i go into the framework, press install and then reboot, at reboot i get the error message, ALWAYS
any ideas, really puzzled
thanks for your time, much appreciated
What are the excact steps you take for installing Xposed? And what version are you using?
xposed installer
Lennyz1988 said:
What are the excact steps you take for installing Xposed? And what version are you using?
Click to expand...
Click to collapse
first off thank you so much for taking the time to try to help, very very much appreciated, now this being said
i installed arrow rom v10 android 4.3 ubuemk1
in it there's an option in the settings page that has the xposed installer framework by going in it , it says thre are 46 app_process bundled and 42 xposedbridge.jar and active none,
i click on install/update and do the soft reboot, period, at this moment and after the reboot, i notice that the homepage is slightly taller and thre's no space for the status bar, and i presume that's the reason i get the "system ui has stopped" error. i can't imagine what setup causes the change in dimentions
btw i use apex as launcher. but that also happened with the standard (i forget the name) android launcher
i can undo the system ui error by going into the same settings page and removing the framework install
and that's it, i can't tell what framework version it's installing,, but know how frustrating this is, i just don't feel like dwelling further on it by trrying to find out what version that is, i hope you understand and just to put you in the proper frame of mind, let me tell you that i am 70 and at times the excess info becomes at times a bit overwhelming, i try to keep up but not been very versed in programming it becomes at times a bit hard
thanks so so much for your time and i hope we can find the root of this
exlaval said:
it says thre are 46 app_process bundled and 42 xposedbridge.jar and active none,
Click to expand...
Click to collapse
Thats not correct. If you The bundled part is correct, but the active part is missing. It should also say 46 app_process bundled and 42 xposedbridge.jar.
Are you sure it has root acces? Check Supersu. And you start with an absolute fresh rom? No backups restored from any app etc.
Can you post the log of Xposed here? After you installed the framework you can go to the main menu of Xposed and there is the log.
xposed, not really
Lennyz1988 said:
Thats not correct. If you The bundled part is correct, but the active part is missing. It should also say 46 app_process bundled and 42 xposedbridge.jar.
Are you sure it has root acces? Check Supersu. And you start with an absolute fresh rom? No backups restored from any app etc.
Can you post the log of Xposed here? After you installed the framework you can go to the main menu of Xposed and there is the log.
Click to expand...
Click to collapse
first off, thank you for the effort, truly appreciated
second, checked su and xposed is listed
third the version that came with arrow v11. is 2.3.1
fourth i went thru every single option in xposed and can't find the log. in a previous rom i remember seeing it, but in this one i have framework, modules, download, settings, about, under settings there's only the option to allow downloads, and under framework if i allow the install which brings in the actual modules numbers under the active column and reboot at this point i get the system ui stop error and have to uninstall it in order to get the status bar back on the screen
matter of fact y'day i downloaded the new arrow v11 and before installing it i did a wipe system and the rom install does the wipe cache, and dalvik so we're starting with a fully clean slate, even further in previous custom roms install i went even further by doing a full system reset
nothing helps, i always wind up with the same system ui stop. i returns my apps with a titanium apps restore after wiping the user data erase.
i must must be doing somthing wrong or must have a setting somewhere else that is interfering with xposed, i have in dev pate the msaa ticked and the turn off hardware overlays also ticked. those are the ONLY AND ONLY settings that i have outside the apex basic drawers settings.
thanks so much for your help, also let me know how i can locate the log in the actual physical location in the drive, not only just be able to read it
xposed, not really
exlaval said:
first off, thank you for the effort, truly appreciated
second, checked su and xposed is listed
third the version that came with arrow v11. is 2.3.1
fourth i went thru every single option in xposed and can't find the log. in a previous rom i remember seeing it, but in this one i have framework, modules, download, settings, about, under settings there's only the option to allow downloads, and under framework if i allow the install which brings in the actual modules numbers under the active column and reboot at this point i get the system ui stop error and have to uninstall it in order to get the status bar back on the screen
matter of fact y'day i downloaded the new arrow v11 and before installing it i did a wipe system and the rom install does the wipe cache, and dalvik so we're starting with a fully clean slate, even further in previous custom roms install i went even further by doing a full system reset
nothing helps, i always wind up with the same system ui stop. i returns my apps with a titanium apps restore after wiping the user data erase.
i must must be doing somthing wrong or must have a setting somewhere else that is interfering with xposed, i have in dev pate the msaa ticked and the turn off hardware overlays also ticked. those are the ONLY AND ONLY settings that i have outside the apex basic drawers settings.
thanks so much for your help, also let me know how i can locate the log in the actual physical location in the drive, not only just be able to read it
Click to expand...
Click to collapse
hi
i reinstalled xposed and as predicted it caused the system ui to stop as usual but this time i got a log which i attached, i am keeping my fingers crossed that someone will be able to decipher it and provide a clue as to what i am doing wrong
thanks so much for anyone's help- btw the file reads well in Word
I was having the same issue using the Stock Launcher on GPE 4.4 android. Using another launcher I didn't get the issue. You might want to disable all modules and reboot to see if the issue goes away, then enable one by one to see what module is causing the issue.
nailed it on the headq
dratsablive said:
I was having the same issue using the Stock Launcher on GPE 4.4 android. Using another launcher I didn't get the issue. You might want to disable all modules and reboot to see if the issue goes away, then enable one by one to see what module is causing the issue.
Click to expand...
Click to collapse
hi and thank you so much for resolving the mystery
i was hung up on using Apex and decided to remove Apex and used Nova, and followed your advice. and lo and behold i can activate Xposed and started by activating Wanam and still no problem then i checked the 3 dots and here i got the System UI stopped error, unchecked it and problem gone so it was the 3 dots.
i don't know if also the 3 dots were causing the problem in combination with Apex, but funny story with Apex even though i got the system ui stopped error, which in theory would cause the complete disactivation of all the modules, the 3 dots module DID work WITHOUT the xposed being activated. i am no planning to go back to apex to check the 3 dots thing, not by a million shot.
also nova does not by itself give the transparent system bar option, i found another module that give that option, so i am finally putting that baby to rest and move on.
thank you so much for coming with the PERFECT ADVICE that really made my day, truly very very much appreciated
Thank you!
exlaval said:
hi and thank you so much for resolving the mystery
i was hung up on using Apex and decided to remove Apex and used Nova, and followed your advice. and lo and behold i can activate Xposed and started by activating Wanam and still no problem then i checked the 3 dots and here i got the System UI stopped error, unchecked it and problem gone so it was the 3 dots.
i don't know if also the 3 dots were causing the problem in combination with Apex, but funny story with Apex even though i got the system ui stopped error, which in theory would cause the complete disactivation of all the modules, the 3 dots module DID work WITHOUT the xposed being activated. i am no planning to go back to apex to check the 3 dots thing, not by a million shot.
also nova does not by itself give the transparent system bar option, i found another module that give that option, so i am finally putting that baby to rest and move on.
thank you so much for coming with the PERFECT ADVICE that really made my day, truly very very much appreciated
Click to expand...
Click to collapse
I was having the same problem. Thank god you guys figured it out! Sure enough I disabled 3 dots and I stopped getting the UI fc.
yeah not unique
silrosriv said:
I was having the same problem. Thank god you guys figured it out! Sure enough I disabled 3 dots and I stopped getting the UI fc.
Click to expand...
Click to collapse
up until your message i was sure i was the only and only noob (or dumb) with this problem, you made me feel so not alone and happy it helped someone else this also made my day
exlaval said:
up until your message i was sure i was the only and only noob (or dumb) with this problem, you made me feel so not alone and happy it helped someone else this also made my day
Click to expand...
Click to collapse
I'm a noob to my s4. I was flashing daily on my s2 and weekly on my note 2. It's easier when you have a custom recovery and the stock rom as backup. And since there are no custom recoveries for our s4 I don't want to take the risk of flashing addons. Apk's I don't mind.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
exlaval said:
i've tried ALL CUSTOM ROMS everysingle one of them causes the same error, somehow the size of the screen grows TALLER and there is no space left for the status bar.
something causes the screen size to enlarge, is there a spec in the developer page that may cause this?
anyone, thanks
Click to expand...
Click to collapse
dunno if you fixed it but have you tried cm?
i am getting the same error after installing a module "cyan lockscreen"... im having custom marshmallow rom.. need help!!!

Apps Thinking I have an SD Card & not working

Hi, I recently was on paranoid android and was getting ready to sell my galaxy s4 I9505 so restored a back up I made of the stock rom which was what came on the phone when I bought it.
I restored the back up, but once the phone had booted it was really slow and I kept getting loads of error messages saying different processes had kept failing. The same as in this thread.
http://forum.xda-developers.com/gal...restoring-stock-rom-cwm-t2882455#post55566370
I then booted back into recovery and wiped data and dalvik cache, which after rebooting sorted the problem. The device was running smoothly and so I went on downloading my apps from the play store.
But I've since noticed apps like swift key, instagram, whatsapp and snap chat seem to be having issues. I don't have any SD card installed just the phones internal memory, which I have ample space (9GB) but whatsapp won't let me download images.
Snapchat says I need to install an sd before viewing video and Instgram mentions I need an SD before being able to take a picture.
Also the language pack for Swiftkey won't download and when I try and download a theme it says it can't save it.
So it seems there's something wrong with the way it's trying to store certain files. Has anyone else come across this yet?
I'm planning on following the whole unroot process anyway documented here: http://forum.xda-developers.com/showthread.php?t=2265477 which I'm hoping will fix it.
But I wondered if anyone knew what it is that's caused it?
Rezaei12 said:
Hi, I recently was on paranoid android and was getting ready to sell my galaxy s4 I9505 so restored a back up I made of the stock rom which was what came on the phone when I bought it.
I restored the back up, but once the phone had booted it was really slow and I kept getting loads of error messages saying different processes had kept failing. The same as in this thread.
http://forum.xda-developers.com/gal...restoring-stock-rom-cwm-t2882455#post55566370
I then booted back into recovery and wiped data and dalvik cache, which after rebooting sorted the problem. The device was running smoothly and so I went on downloading my apps from the play store.
But I've since noticed apps like swift key, instagram, whatsapp and snap chat seem to be having issues. I don't have any SD card installed just the phones internal memory, which I have ample space (9GB) but whatsapp won't let me download images.
Snapchat says I need to install an sd before viewing video and Instgram mentions I need an SD before being able to take a picture.
Also the language pack for Swiftkey won't download and when I try and download a theme it says it can't save it.
So it seems there's something wrong with the way it's trying to store certain files. Has anyone else come across this yet?
I'm planning on following the whole unroot process anyway documented here: http://forum.xda-developers.com/showthread.php?t=2265477 which I'm hoping will fix it.
But I wondered if anyone knew what it is that's caused it?
Click to expand...
Click to collapse
Did you install the stock rom before or have you just restored your old backup?
If I were you, I would clean everything, install the stock sammy firmware (with latest base) and after that restore your backup
Tkkg1994 said:
Did you install the stock rom before or have you just restored your old backup?
If I were you, I would clean everything, install the stock sammy firmware (with latest base) and after that restore your backup
Click to expand...
Click to collapse
No it's not a rom, I just restored my old back up of my OS before I started flashing any custom roms.
I did a factory reset on the phone hoping it might resolve it. Which hasn't, but I'm not sure now if it's got rid of CWM. Would as I can't seem to get it to boot into recovery (it maybe just me not releasing the volume up button at the right time).
Think I'm going to have to flash a clean stock firmware following the unroot process and hope that fixes it.

(Help) How Do I Restore Stock Touchwiz After Overwriting it?

(Help) Restoring the original Touchwiz apk after a massive screwup xD
Hello everyone =)
I've been having this problem for a while with no apparent way to solve it...
I'm running a stock non rooted Lollipop on my Note 3. A while ago I saw a Note 4 launcher and got excited to install it. So I installed the apk file overwriting the existing Touchwiz. I figured that if it doesn't work I'll just go to the "uninstall updates" option to go back (been doing that all the time on my old Xperia S). I started getting the "Touchwiz has stopped working" message over and over again so I went to the "uninstall updates" option and found it greyed out. I deleted Cache and data, tried to reinstall the older apk, even tried to install other apks but I just keep getting "App not installed". I tried reflashing Lollipop using Odin but it still doesn't work!! xD
I have the original apk file for the launcher. Is there a way to fix this that doesn't require root?? I'm desperate here xD
Thanks in advance!!!!!!! =D
StormShadow_94 said:
Hello everyone =)
I've been having this problem for a while with no apparent way to solve it...
I'm running a stock non rooted Lollipop on my Note 3. A while ago I saw a Note 4 launcher and got excited to install it. So I installed the apk file overwriting the existing Touchwiz. I figured that if it doesn't work I'll just go to the "uninstall updates" option to go back (been doing that all the time on my old Xperia S). I started getting the "Touchwiz has stopped working" message over and over again so I went to the "uninstall updates" option and found it greyed out. I deleted Cache and data, tried to reinstall the older apk, even tried to install other apks but I just keep getting "App not installed". I tried reflashing Lollipop using Odin but it still doesn't work!! xD
I have the original apk file for the launcher. Is there a way to fix this that doesn't require root?? I'm desperate here xD
Thanks in advance!!!!!!! =D
Click to expand...
Click to collapse
? reset your ?
You must have not flashed the right rom in odin.
Go to sammymobile and select the rom for your exact device and region (country and provider if needed)... flash it. It will restore everything back to stock (including the TW launcher, etc).
cyberboob said:
You must have not flashed the right rom in odin.
Go to sammymobile and select the rom for your exact device and region (country and provider if needed)... flash it. It will restore everything back to stock (including the TW launcher, etc).
Click to expand...
Click to collapse
hmmm weird... I originally installed the Russian firmware with the original Touchwiz (before I ruined it xD). I flashed that exact firmware after I messed up Touchwiz.
I'll try a different region and see if it works.
Thanks in advance! =D I'll keep you updated =)

Soft Brick Perhaps Due to Custom Font Change via ROOT on S4 I337

Hello all!
I am very very... very new to rooting so please bear with me. So basically I used KingRoot for an easy rooting process and then went and used an app that gets rid of KingRoot in favor of Super SU (App was called Super SU Me I think, on Play Store).
So one of the first things I did was download the Jrummy font changing app. I found a font I liked and I was prompted to make a backup of my current fonts and to have a nandroid backup as well in case. So I thought, being the noob that I was and still am that I wouldn't need to do such a thing so I just backed up my fonts thinking "good enough". I then reboot my S4 and it gets stuck on the AT&T logo (so a soft brick right?). So, I freak out cause I'm a noob and I din't expect a font change to soft brick my S4. Luckily before rooting I backed up photos and music but anyways I ended up booting into recovery mode and wiping data and the partition cache.
This ended up working (can't remember if it was multiple tries) and I got back to Android 5.0.1 Lollipop but was greeted with an "Unfortunately, Samsung Keyboard has stopped working." I thought this must be because of the font change so I maneuver to settings (with the error for the keyboard popping up every time I close it by tapping "OK") and change the default keyboard to Swype and that stopped the error from popping up. I then go to change the font and it says "Unfortunately, Settings has stopped working." or something like that and kicks me out of settings. So somewhere down the line I restart my phone and the process keeps repeating so I have to access my phone by factory resetting it in recovery mode and clearing the partition cache or whatever and then I can use android but the keyboard error keeps popping up every time.
I guess you could say I'm freaking out and I definitely guess you can say I'm a total noob at this.
BTW: I have no recoveries or anything so basically stuck with what I have. Also I tried a program called "_Hovatek__Auto_Font_Unbricker_V1.0 " and that didn't work even when I got the green text running in the program or whatever.
Please help! This is really bad I know!
Return to stock using Odin and this guide http://forum.xda-developers.com/showthread.php?t=2926642
Sent from my A0001 using Tapatalk
Can you do that with android 5.0.1? I don't know if I can downgrade in order to restore to stock.
MastehWang said:
Can you do that with android 5.0.1? I don't know if I can downgrade in order to restore to stock.
Click to expand...
Click to collapse
The last full firmware release for AT&T S4 was NB1. After that, there is only incremental updates (OTA) to lollipop. There is no full firmware release for android 5.0.1. As such if we screwed something up, we all have to go back to NB1 and start from there.
So please follow the guide mentioned in the previous post.
Wow! I can't believe that solved it! I had tried other solutions that I saw using Odin (kind of a mix mash of all the stuff I read) but that guide takes the cake! Seriously the best solution, thank you for the responses!

Categories

Resources